Will on/off change speed?

Aloha all, I apologize for the title but wasn't in a creative thought process when I entered it. I understand that if if you have older machines on a home network that speeds will always be reduced to lower band, i.e.. if a Macbook is working in "n" and an older Powerbook is working in "g" they both will only achieve "g" speeds on the network. My question is, what if the slower machine is turned off, will the "n" capable machine return to "n" speeds, or will it always stay in "g" speed? I'm hoping my new Macbook will use it's capabilities if I keep my son's G4 Powerbook turned off when he's not around, instead of letting it sleep. Mahalo for any suggestions, tips, or info. JB

Although it is true that your 802.11n devices will experience degraded bandwidth performance when any 802.11b/g device is connected to the network, it will not be degraded all the way down to either 802.11b or g. You can expect approximately 70% of 802.11n performance with 802.11b/g devices connected.

Similar Messages

Changing Speed of clip in timeline in a specific wqay

I realize there are a variety of ways of affecting
a change to the speed of a clip already in the timeline,
but I'm trying to figure out how to do it in one very specific way:
If I have 3 clips (A,B,C) and I want to change the speed
of B so that it is slower, but not expand the clip from
it's original length (meaning it will still occupy the
same spot, duration and length in the timeline), is there a way of accomplishing that just by punching a specific figure
in somewhere (i.e. make it move at 50%).
I know about fit-to-fill, time remap, right clicking a clip
and changing speed. However, I don't want the clip to
expand past it's spot in the timeline, just play slower in the spot it occupies.
The closest I've come is going into the time remap tool and lowering the end keyframe so it moves slower, but this is
imprecise. I want to be able to punch in 50%, or 60% somewhere and have it take, without expanding. The time remap tool won't let me punch in 50%, although that indicator moves when I drop the ending keyframe down a little.
Can what I'm describing be done, and if so, how? Thanks.

Match frame back to the original media. Slow it down, then cut it back in.
You cannot slow down the clip in the timeline without it expanding. You are telling FCP to take the existing clip and make it longer...of course it will expand in size. It doesn't know that you don't want it to do that. It assumes (rightly so) that you want the clip, with the IN and OUT points you designated, to be slower. Keeping it in the same spot on the timeline means cutting off the head or tail of the clip...losing points you told FCP you wanted.
Simple to just load the clip into the viewer, slow it down to the speed you want, then cut it in.
Shane

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Will upgrading ram improve speed in Mac and windows (VMware fusion)?

I Am using VMware fusion for music production and that program requires a lot of workspace. I have a MacBook Pro 4gb ram and when I turn VMware on it goes to 2 gb ram in Mac and 2 gb ram in windows. My Mac speed is normal when VMware fusion is turned off but when I turn it on my Mac is very slow. Will upgrading ram improve speed in mac and also in windows (windows is also very slow)
Btw my english isn't very good

Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM hungry. It will improve the performance of applications that run mostly in RAM or when loading programs.
In your case it will most likely help. You should plan on at least 8 GBs or more, depending upon what your model supports.

How to change Speed?

Hi,
I'm using 2960 with GLC-GE-100FX= .
I can not change Speed from Auto to 100MB.
Please advice how to change Speed.
Current I/F setting is as following,
Switch#sh int gi 0/1
GigabitEthernet0/1 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is 0025.b42a.d919 (bia 0025.b42a.d919)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, Auto-speed, link type is auto, media type is 100BaseFX SFP
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Best regards,
Ichiro

Hi Leolaohoo,
Thank you for your prompt reply and exact answer.
I connected Fiber optic cable to SFP. Speed became 100Mb/s from Auto automatically.   Thanks!
Best regards,
Ichiro

Any way to change speed of a clip in "over-write edit" mode?

I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Laptop will shut off unexpectedly

Roughly one and a half years after I got my dual core computer it started shutting off randomly. Since this began it has been wiped twice and we've replaced the battery, charger, motherboard, and fans but within a week it always starts turning off every couple of days again. I've taken it in to office max who we bought it from and they didn't fix anything concrete before sending us over to Toshiba warranty. Toshiba then did the same thing, replacing one part at a time and then shipping it back insisting it was fixed (but it would shut down the moment I turned plugged it in and turned it on)
Finally they said if it wasn't fixed "this time" that it would be replaced for free. So we sent it in, they fixed nothing before sending it back, and we called to set up the replacement. They played games and insisted it needed to be sent in again to be sure. This was of course a load of garbage but my father who was on some heavy meds at the time agreed and sent it back in. This then happened for a 3rd time and they held onto the computer for the remainder of the warranty. Since I couldn't convince my father to follow up with some course of action my computer is still messed up but I have no means to get it fixed. I tried getting it repaired at Crystal pc but after wiping it (this was the 2nd time) and cleaning the inside they said it should work. It will stay on long enough for me to use it now but every few days it turns off and will turn off multiple times in the same 24 hour period. A man working at Crystal pc recommended changing the power setting to remove sleep mode (as I could prevent the shutdown usually by hitting the power button a few times) but now instead of switching to sleep mode in place of the shutdown it will just shut down.
I'm new to this forum but if the issue of getting the computer replaced is still available or anyone has technical advice either would be appreciated.

For anything warranty I would private message Peter the moderator with you model and serial number and any repair info, RMA numbers that you have because he is the only one here that can help with that kind of issue.
To send a private message click on the envelope at the top of the page then go to compose new message.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Will turning off auto screen rotate save battery o...

Read this somewhere, want to confirm with someone knowledgeable. cheers.
Laugh, and the world laughs with you. Cry, and the world laughs louder :-)

not likely, if you keep rotating it it will increase the clock speed and load for a few seconds at a time but its not noticeable so turning it off won't really do much

Computer will log off after so many minutes of no usage

My MacBook Pro will log off or the log off confirmation window will log off after so many minutes of being away from my computer. This happens instead of my computer just going to the screen saver. Any way I can change this setting somehow!?
Thanks in advance!

System Preferences > Security & Privacy > General > Advanced
Check to see if Select “Log out after ... minutes of inactivity.” is checked.

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try a few times to get it to work

How do i change my iCloud account on my iPhone? I want to change it to my husbands so all of our information syncs, but will this completely delete my iCloud account? and by doing this how will my phone change (such as contacts, photos etc.) ?

I want to change it to my husbands so all of our information syncs on to my iphone and our ipad, but will this completely delete my iCloud account? and by doing this how will my phone change (such as contacts, photos etc.) ?

Bad idea.
What information do you want to share, exactly? You can share contacts, reminders, and calendars with other iCloud users without the need for both of you to use the same iCloud account. You can authorize both phones to use apps purchased under the same Apple ID without sharing an iCloud account.
Sharing an iCloud account is a bad idea in general. There is too much opportunity for someone to damage or delete data that will affect both.

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in private browsing?

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in Private Browsing?
I'm just starting using Firefox but I won't be using it for long if I have to re-size the screen with every new location viewed.

Try this add-on
[https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level ]

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

Will on/off change speed?

Similar Messages

Maybe you are looking for