Will OS 10.4.11 update run classic?

Hello,
I'd like to know if I update from 10.4.6 to 10.4.11, will I still be able to run Classic?
Thank you for the information.

Hi,
I need your help. I have a CD-ROM that I NEED to use for a college class. It requires Classic, but I have OS 10.4.11 on my Ibook G4. All I want to do is install a Classic emulator just until this class is over in 3 weeks. Where can I download a Classic emulator?

Similar Messages

Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs. No iTunes now.

Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.
Now, iTunes won't launch and can't be updated. Please help.
If I have lost my music collection I will be switching platforms ASAP. It is insane that Apple has updates seemingly every day for their products.

I was in your same situation with 14 downloads and 14 attempts.
You have to make sure that your Mac is booting into 64 bit mode. You can make sure of this by going into System Preferences and scrolling down to 'Software' and making sure that you are booding with 64 bit Kexts.
If not, restart while holding the 6 and 4 keys down until you see the spinning gear wheel and try installng again.
BUT, what I also did was to go into Applications, click on the Lion installer, Get Info, and give yourself custom priviliges to Read And Write.
I did this simultaneously, and I don't know what function did it, but it worked for me, with no further downloads of the installer.
Good luck!

Iphoto will not open. Says updating but no updates running. Any ideas?

Iphoto will not open on my Mac. Says updating but no updates running. Any ideas?

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running? Is your profile correct?
what is the exact message you get when launching iPhoto?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

I am running Firefox 3.6.24 on a Power Mac G5 Quad, OS 10.4.11. I have to run Classic. Can you recommend a browser to use since you won't be updating 3.6 anymore?

I am running Firefox 3.6.24 on a Power Mac G5 Quad, OS 10.4.11. I have to run Classic. Can you recommend a browser to use since you won't be updating 3.6 anymore?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''and''''' OSX 10.5 or higher.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs.

How can I solve this? Every time I have the option to update an application I receive the same notification: "The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs"

Can we eliminate one minor possibility: are you in the UK and using Virgin Media cable connection? I ask because the latest 'Superhub' firmware is corrupting large downloads for some people.

Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

Which latest update? Details get answers. Rather than using SU, DL and install from http://support.apple.com/downloads/.

When I update to Mountain Lion, will I still be able to run iWeb?

When I update to Mountain Lion later this month, will I still be able to run iWeb?

Here is some info on MobileMe and the role it plays re. iCloud and iWeb - it appears you can keep using iWeb with another web hosting service (scroll down):
http://www.apple.com/mobileme/transition.html
@ macintosh290:
MobileMe ceased to exist on June 30th.

I have just bought a used 2009 macbook pro, I have updated to OS X but I am completely new to mac, are there any fairly priced utility softwares out there which will help me keep my mac running smoothly?

I have just bought a used 2009 macbook pro, but I am new to computing and mac so can anybody please tell me if there is reliable software that will help me keep my macbook running at its best without breaking the bank?

In General 3rd Party AV Software and Cleaning Utilities tend to cause More Issues than they claim to fix...
They are Not Required...
Mac OS X tends to look after itself.
See > Mac OS X Built in Security > http://www.apple.com/osx/what-is/security.html
More Info Here > https://discussions.apple.com/thread/4545776?tstart=0
The Safe Mac > http://www.thesafemac.com/mmg/
To keep your Mac Happy...
Have a look here > http://pondini.org/OSX/Scripts.html
More Info Here > The myth of the dirty Mac

OS 9 unable to boot after running classic in OS X Tiger fro first time

I have this problem with dual boot on an iMac 400 after upgrading the OS X to Tiger.
After I install the Tiger, I tried to boot up from OS 9 is OK.I restarted in OS X and launch the classic environment, it performs some update to the System Folder and run classic successfully. After which I try to restart in OS 9 by selecting in Startup Disk in Syatem Preferences, once I click restart, it starting up showing the OS 9 mac icon but it change to disk with question mark immediately.
Have anyone tried this and having the same problem ?

Hi Leonard!
How did you upgrade to Tiger?
Simple Upgrade?
Archive & Install?
Erase & Install?
Which OS did you upgrade from?
There is some info here Computer Can Start Up From Mac OS X But Not From Mac OS 9.
Quoted from that page:
It is likely that the disk was reformatted using Disk Utility for Mac OS X, and that the option to install the Mac OS 9 drivers was not selected. If you do this and then reinstall Mac OS 9 from the Restore CD set included with your computer, it will no longer start up from Mac OS 9, for example. Any time the Mac OS 9 drivers are not installed on the hard disk, you will not be able to start up from Mac OS 9.
Does that pertain?
Good Luck!
ali b

OSX 10.4.11 won't run Classic

I'm not the most computer-literate person, so this is probably a silly question. I have a Powerbook G4 that just crashed with all of my hard drive contents on it, so I had a new drive installed and my OS re-installed along with it. When I brought it back home and updated everything, I tried running a program that uses Classic with no success. When I tried to turn Classic on manually, I got a message saying that I don't have a version of Mac OS 9 installed that supports Classic. I never installed OS 9 to begin with (I assume it came with Tiger when I purchased it?), but I would like to be able to run Classic for certain things. If anyone has any suggestions, I would be very grateful. It's probably a quick fix, but I don't want to mess any settings up.
Thank you!
Message was edited by: antrapaige

Welcome to Apple Discussions!
pre-Gigabit ethernet Powerbook G4s came with 9.1 on their restore CDs, and could also take 9.2.1 retail. They can both boot Mac OS 9 and use Classic.
Their USB ports are behind a back flap between the hinges.
Gigabit ethernet Powerbook G4s came with 9.2.1 and could only use the software/restore CD to install Mac OS 9. They can both boot Mac OS and use Classic. Their USB ports are behind a back flap between the hinges. While booted into Mac OS 9, they could be upgraded to 9.2.2 for best Classic compatibility.
DVI Powerbook G4s are like the Gigabit Powerbook G4s, except the fact they already came with 9.2.2. 867 Mhz and faster versions of these can both use 10.5 and boot into Mac OS 9. Once upgraded to Mac OS X 10.5, they can't use Classic except on a second Firewire hard drive or partition with 10.4.11 and earlier loaded.
Powerbook G4s starting with the 12" and 17" 2003 Powerbook G4s, and later the September 2003 Powerbook G4, will not boot into Mac OS 9, and can only use Classic. These had USB ports on the left and/or right hand side of the keyboard. Once upgraded to Mac OS X 10.5, they can't use Classic except on a second Firewire hard drive or partition with 10.4.11 and earlier loaded.
To tell if at bare minimum Classic is installed, notice if there is a System Folder with the Control Panels in its contents. If it is, and you can't locate it in Apple menu -> System Preferences -> Classic that System Folder may need to be blessed:
http://support.apple.com/kb/TS1929
If your Mac should be able to boot Mac OS 9, but won't after Apple menu -> System Preferences -> Startup Disk loads the Mac OS 9 system folder and you hit restart, you may need to backup your data at least twice, and reformat to include the Mac OS 9 drivers:
http://docs.info.apple.com/article.html?artnum=75275

How can I re-set the App Store so the Updates will again appear under the Updates tab?

Hi,
I am running a Macbook Pro (retina). Lately when I launch App Store and click on Updates the software updates for the software on the Macbook do not show up under the Updates tab. However, when I go to the Purchased tab I see there Update buttons next to programs that have updates ready to download.
How can I re-set the App Store so the Updates will again appear under the Updates tab?
Many Thanks,
David

Wanna know this too

With the new updates for iTunes, I can no longer print a CD case playlist when I burn a CD. It prints in a jumbled mess. I have reinstalled, updated, run diagnostics on my NEW printer, I am out of ideas!

With the new updates for iTunes, I can no longer print a CD case playlist when I burn a CD. It prints in a jumbled mess. I have reinstalled, updated, run diagnostics on my NEW printer, I am out of ideas!

It appears to be a bug with the current build. Hopefully it will be fixed in the next release.
tt2

Windows 8.1 will not get Forefront Client Updates from WSUS

Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8th,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. Please help.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!

How much free space do you have? If it is low, installers may not be able to run properly.

OS 10.9.2 will not allow me to update my old iPhoto app.

OS 10.9.2 will not allow me to update my old iPhoto app. I upgraded computer from a PowerBook G4 to a MacBook Pro and migrated my data onto the new machine. I had iPhoto '09 installed running on 10.5.8.Now on 10.9.2 and I get get a message that iPhoto was registered to another user and that I will need to purchase my own copy. Not sure why since I've always used the same account and its my only account. Isn't Mavericks supposed to come pre-loaded with the latest version of iPhoto?

This screenshot shows which previous versions of iPhoto qualify for a free upgrade to 9.5.1 and which require a purchase;
If you're having problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
OT

Will OS 10.4.11 update run classic?

Similar Messages

Maybe you are looking for