Will OS X Mavericks 10.9 install on a Macbook Early 2008?

I have a Macbook 4,1 (Early 2008) and was wondering if OS X 10.9 Mavericks will be able to install on it?

Come on Apple!  Mid/Late 2007 MacBook Pro?  Who the heck knows when MID starts? Because I have a 17" MacBook Pro that's from MID 2007, (week 22).  However, since it can't run Lion or Mtn Lion, I'm going to pretty much assume it won't run Mavericks either, although Apples "marketing" seems to "hint" that they are now able to run on a few more systems than those to OS's could. I know it'll run on my newer iMac since I'm already at Mtn Lion, so it's safe to say anything that can run those latest two can run this new one.
I'm just wondering if we can bring the laptop into this new world. Why doesn't the App store have a little link that can just LOOK into the information on a system I log into it from and say, "YES! you can run this!" or "No, sorry you can't."  It'd be such an easy thing to do. 

Similar Messages

  • Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

    I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
    any information this is with a clean install and even if I update  lion it does the same everything works fine on  lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
      Model Name: Mac Pro
      Model Identifier: MacPro3,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.8 GHz
      Number of Processors: 2
      Total Number of Cores: 8
      L2 Cache (per Processor): 12 MB
      Memory: 8 GB
      Bus Speed: 1.6 GHz
      Boot ROM Version: MP31.006C.B05
      SMC Version (system): 1.25f4
      Serial Number (system): G881111VXYK
      Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
    AMD Radeon HD 6870:
      Chipset Model: AMD Radeon HD 6870
      Type: GPU
      Bus: PCIe
      Slot: Slot-1
      PCIe Lane Width: x16
      VRAM (Total): 1024 MB
      Vendor: ATI (0x1002)
      Device ID: 0x6738
      Revision ID: 0x0000
      ROM Revision: 007-NETKAS-ORG
      EFI Driver Version: 01.00.507
      Displays:
    Cinema HD:
      Display Type: LCD
      Resolution: 2560 x 1600
      Pixel Depth: 32-Bit Color (ARGB8888)
      Display Serial Number: CY03018WXMP
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Rotation: Supported
      ECC: Enabled
    DIMM Riser B/DIMM 1:
      Size: 2 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x014F
      Part Number: 0x5453324741504D41435038502D5420202020
      Serial Number: 0x00031CFB
    DIMM Riser B/DIMM 2:
      Size: 2 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x014F
      Part Number: 0x5453324741504D41435038502D5420202020
      Serial Number: 0x00031CFB
    DIMM Riser A/DIMM 1:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01431026
    DIMM Riser A/DIMM 2:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5935
      Serial Number: 0x57656411
    DIMM Riser B/DIMM 3:
      Size: Empty
      Type: Empty
      Speed: Empty
      Status: Empty
      Manufacturer: Empty
      Part Number: Empty
      Serial Number: Empty
    DIMM Riser B/DIMM 4:
      Size: Empty
      Type: Empty
      Speed: Empty
      Status: Empty
      Manufacturer: Empty
      Part Number: Empty
      Serial Number: Empty
    DIMM Riser A/DIMM 3:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01172313
    DIMM Riser A/DIMM 4:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01172714
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    WDC WD5000AAKS-00A7B0:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: WDC WD5000AAKS-00A7B0                 
      Revision: 01.03B01
      Serial Number:     WD-WMASY0158891
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk2
      Medium Type: Rotational
      Bay Name: Bay 1
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk2s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk2s1
      Content: EFI
    HD:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 484.82 GB (484,820,348,928 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk2s2
      Mount Point: /Volumes/HD
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk2s3
      Content: Apple_Boot
    WDC WD5000AAKS-00A7B0:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: WDC WD5000AAKS-00A7B0                 
      Revision: 01.03B01
      Serial Number:     WD-WMASY0158891
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk2
      Medium Type: Rotational
      Bay Name: Bay 1
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk2s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk2s1
      Content: EFI
    HD:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 484.82 GB (484,820,348,928 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk2s2
      Mount Point: /Volumes/HD
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk2s3
      Content: Apple_Boot
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZBHBEEAH
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk1
      Medium Type: Rotational
      Bay Name: Bay 2
      Partition Map Type: MBR (Master Boot Record)
      S.M.A.R.T. status: Verified
      Volumes:
    UNTITLED 1:
      Capacity: 500.11 GB (500,107,860,992 bytes)
      Available: 449.41 GB (449,412,988,928 bytes)
      Writable: Yes
      File System: MS-DOS FAT32
      BSD Name: disk1s1
      Mount Point: /Volumes/UNTITLED 1
      Content: DOS_FAT_32
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZBHBEEAH
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk1
      Medium Type: Rotational
      Bay Name: Bay 2
      Partition Map Type: MBR (Master Boot Record)
      S.M.A.R.T. status: Verified
      Volumes:
    UNTITLED 1:
      Capacity: 500.11 GB (500,107,860,992 bytes)
      Available: 449.41 GB (449,412,988,928 bytes)
      Writable: Yes
      File System: MS-DOS FAT32
      BSD Name: disk1s1
      Mount Point: /Volumes/UNTITLED 1
      Content: DOS_FAT_32
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZAK1RKSF
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Rotational
      Bay Name: Bay 3
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk0s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
    machd:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 372.42 GB (372,419,407,872 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZAK1RKSF
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Rotational
      Bay Name: Bay 3
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk0s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
    machd:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 372.42 GB (372,419,407,872 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

  • Can I install a 1TB SSD on MacBook Early 2008 model?

    Hi,
    I have a MacBook Early 2008 model running on Lion 10.7.5. Everything worked perfectly until recently I noticed that the HDD has been making some weird clicking sounds. I spoke and showed it to the local repair shop and they suggested that I have my HDD replaced asap as it could crash anytime.
    Now I was wondering if I could just install a SSD on it as those run quite faster than HDD's? I did ask the local repair shop this question but they seemed not to know anything about the MacBook's compatability with the SSD as its an old model.
    A quick answer would be very much helpful.
    Thanks
    -Mustafa

    • What I really wanted to know is, are the HDD and SSD connectors same? And would the MacBook be able to handle it?
    Yes. Should work very well. I've done this on an old Macbook and a new one. Not difficult, but you will need a # 8 torx screw driver and a #1 Phillips.
    The connectors are standardised.
    You can google for "how to" videos, there are many on line.

  • I am currently running OS X 10.5.8 on my MacBook (early 2008) and want to know if I can upgrade to a version that will allow me to use iCloud to sync with my new iPad?

    I am currently running OS X 10.5.8 on my MacBook (early 2008) and want to know if I can upgrade to a version that will allow me to use iCloud to sync with my new iPad?

    I believe to use iCloud you need to run at least Lion (10.7). (Only the Find My iPhone or Find My Mac parts of iCloud work with OS earlier than 10.7/Lion).
    I think you can run Lion but you should check each of the following:
    "To use Lion, make sure your computer has the following:
    An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended); you can install without Mac OS X v10.6 by using an OS X Lion USB Thumb Drive, available on the Apple Online Store
    7 GB of available disk space
    2 GB of RAM
    If your Mac does not meet these requirements, you will need to upgrade your Mac before installing Lion"
    You have a Core 2 Duo. You can upgrade to 10.6 and then install Lion, or use the thumb drive approach mentioned above (thumb drive Lion costs about $70 I think). You need to check your RAM to see if you have enough.
    Folks have reported that 4 GB RAM is really a minimum for a decent experience with Lion.
    For Mountain Lion, see this ( http://support.apple.com/kb/HT5444 ) for what you need to have to install OS 10.8. I don't think you can use Mountain Lion (10.8) with your early 2008 Macbook.

  • HT201364 I have a macbook air 1.1 --- maverick update wont install  -- isnt this a late 2008 mac air?

    How do I figure out whether my MacBook Air can run with OS X Maverick? I think its a late 2008 MacBook Air, but the installer wont allow me to install.
    Thx,
    flying gorilla
    odel Name:          MacBook Air
      Model Identifier:          MacBookAir1,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          1.6 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MBA11.00BB.B03
      SMC Version (system):          1.23f20
      Serial Number (system):          W8813CU6Y51
      Hardware UUID:          71716D67-B5FC-50DC-8CB5-DF2A06EEA879
      Sudden Motion Sensor:
      State:          Enabled
      System Version: Mac OS X 10.6.8 (10K549)
      Kernel Version: Darwin 10.8.0
      Boot Volume: Macintosh HD
      Boot Mode: Normal
      Secure Virtual Memory: Enabled
      64-bit Kernel and Extensions: No
      Time since boot: 10 minutes

    No, it's the very first MBA. Max OS X is 10.7.5. A Late 2008 MBA is 2,1.
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Mavericks refuses to install on my macbook pro retina

    I have purchesed a new macbook pro with retina display (late 2013) that came with Mavericks pre installed.
    Now when I try to boot from a USB Key with OS X 10.9.1 installer on it my mac refuses to boot from the USB Key. If I double clic the installer icon there's a message saying that "OS X Mavericks cannot be installed on this computer."(!?)
    Even when I try to download it from the app store I receive the same message.
    What can I do?
    Thanks for any help.

    I understand your reasoning;however, this is what Apple has apparently decided, so there isn't anything we can do about it. When Lion first was introduced, you were able to download the installer and then save a copy of it somewhere. This is no longer possible now with the new Macs/new OS - when you invoke recovery and download the OS, there is no way to save that installer as the download/install sequence is one process now and there is no way to save the installer as it deletes itself after the install.
    Aside from that issue, new Macs have not been able to use the app store or software update version on thei Macs because of their special builds until one or two updates later when the updates "caught up" with the new Mac's OS build version.
    As you can see here, a Mac might have come with different OS versions as well as different builds of the same version:
    http://support.apple.com/kb/HT1159
    Personally, I've decided to keep a "fresh install" bootable clone as an emergency measure (which I do not update purposely so it remains "factory fresh") in addition to my regular clones which are updated regularly. That eliminates the need for a download in order to reinstall.

  • How to install windows 7 on early 2008 macbook pro?

    I have an early 2008 or late 2007 probably macbook pro. I was running windows xp via bootcamp on it. i want to install windows 7 on it.
    i read the apple statement about my macbook pro not being compatible with it.
    is it because of the hardware or just the leopard software?
    Can i upgrade my leopard to snow leopard and then be able to install windows 7 on it?
    Just want to know if spending $ 30 on leopard upgrade is worth it since i will do it just to run windows 7.
    Please help

    just a little bump for help, please

  • Remove OS X and install Windows 8 on early 2008 macbook

    My early 2008 white macbook is on snow leopard which is seemingly no longer receiving important security updates. I was wondering if it would be possible to remove OS X and simply install Windows 8 on this particular machine. Will there be any driver problems? Is there anything in particular that I should look out for. I'd rather have a pure Windows installation rather than through bootcamp which doesn't seem to support the latest windows without a bit of hacking.

    just a little bump for help, please

  • Can I install windows on my early 2008 iMac?

    I really want to get a software called Training Peaks running on my early 2008 iMac, but it appears that I can no longer get a version of Windows which is compatible.
    Is this correct? Is there a way around the problem?

    Compatible version of Windows for your Mac or for that software you want to run on Windows.
    You can install Windows 7 using Boot Camp or you could install a virtual machine software program and install Windows XP into a Virtual Machine. But you would need a retail or System Builders copy of either XP or 7 to do either of those installs.

  • Will OSX support Adaptec PCI Express scsi cards in an early 2008 Mac Pro?

    I need to move my scsi interface scanner from a G4 machine and the old PCI Adaptec AHA 2930 CU card won't fit.  I was using Snow Leopard on the G4 unit - it still supported the Adaptec card and all was good.  My 23" Cinema display then bit the dust and I replaced it with with a 24" Cinema display with the mini display port connector.  I purchased an adapter from Kanex to make it compatible, but the adapter was defective - so I returned it.  Their reviews aren't very good - seem to have a lot of D.O.A. adapters - not sure I want to deal with the frustration, but it would be the least expensive option.
    I do have, however, an early 2008 Mac Pro that I can use, provided that it supports the newer PCI Express scsi cards that Adaptec makes.  I'm not sure which one to get yet, either.  I'd rather not buy one and find out it won't work.  I can make a partition on the boot drive for Snow Leopard in case scsi isn't supported in later versions of OSX.  In case you're wondering, I did use a scsi to firewire adapter to run the scanner on my laptop for a while - but it stopped working and I can't locate any replacements (or the company - 2nd Wave Technologies - for that matter).  I haven't tried locating a scsi to usb adapter, but from what I can see, they are getting pretty scarce.  I'd replace the scanner, but it is fairly pricey and the newest model retails at the price of a small car - so that really isn't an option at this point.
    Thanks in advance for any info.
    Message was edited by: Jakob Richardt
    Changed name of display adapter manufacturer.

    Thanks for the response - I guess the question I should have asked is "Will OSX support scsi cards in an early 2008 Mac Pro and if so, which ones?"  I didn't realize Apple and Adaptec weren't working together - my G4 tower arrived with an Adaptec card in it when I bought it in 2000 (from a third party vendor, not directly from Apple).  It came with either OS 8.* or OS 9.  When I updated to OSX, everything continued working, so I didn't think much about it until I pondered using the Mac Pro for the scanner - at some point the G4 is going to stop working - need to have a solution before that happens.  The manuals I've been reading refer to the slots in the G4 machines as PCI.  The manual for the Mac Pro refers to the slots as PCI e.  These slots have fewer connectors, so I thought that the "Express" part of the name referred to this particular card configuration when compared to the longer card connectors in the G4 type of machines.
    Can you tell me what scsi card brands will work in the Mac Pro?  I'd still like to pursue this option.  As I mentioned in my original post, buying a new scanner isn't in the cards right now - it costs more than the computer, so, although pricey, the card option is still less expensive.
    Thanks!

  • How to create bootable iso file from usb flash drive to install windows 7 on macbook early 2008

    how to create bootable usb flash drive from iso file to install windows 7 on macbook early 2008

    I would like to install windows on my mac because I am in engineering school and there a lot of programs I'd like to have on my computer that only run on windows.  And yes I'd like to use bootcamp and I know there must be a way to install off a flash drive.  Do you know of a way?

  • Mavericks refuses to install on my macbook pro 2011

    Downloaded mavericks.  It won't even try to install on my late 2011 macbook pro?!

    Is your data backed up?
    Are you installing from the Mac App Store?
    Have you checked all your software and hardware is Mavericks compatible?

  • I have only 200mb of free ram. i have 2gb installed. I have early 2008 2.4gh macbook running os x lion

    I have an ealry 2008 macbook. it has 2.4gh processor and 2gb of ram. when i had snow leopard it ran like a champ. i installed lion and she still runs good but she suffers some lags. i checked the activity monitor nd it has 200mb of free ram left. to me thats a little bit. i like to play video games. when i had snow leopard i was able to play gta san andreas with no problem. so my question, is really bad 200mb? and will 4gb of ram improve the system?

    Free ram isn't the on,y ram that's available to run programs http://support.apple.com/kb/HT1342
    BUT.....2gb is the bare minimum for running Lion, you need at least 4gb in reality. Your computer will run better with 4gb.

  • Extra RAM install on mac pro early 2008

    Hello,
    I have purchased and installed 8GB of ram in my mac pro. In addition there was 4 slots of RAM there already. These are 4 x 1GB totalling 4GB of RAM. With the 8GB that will make 12GB in total. However my Mac Pro can only see 10GB of RAM. I have placed the original 2 slots of (2x1GB) RAM with the new 8GB of RAM on the upper riser and the two slots of 1GB on the lower. The lower is not being detected at all. This is despite me moving them around in different slots. What is the answer? I know the RAM is operational and I know the riser trays are fine, my conclusion is that I am not placing the remaining 2 G in the correct slots. Well if anyone can help. I have seen the photo on support community of where you place RAM additional RAM and it still does not recognise the lower riser RAM.

    How To Install and Remove Memory Mac Pro
    https://support.apple.com/kb/HT4433

  • I have a black macbook (early 2008).  I bought a new printer that requires Mac OS X 10.6.  I only want the minimum requirements to install a new printer.

    I have seen other threads of people trying to upgrade to lion, mountain lion, but I have not seen any that mention upgrading to 10.6 alone..
    Please please help.

    Which OS X is currently installed on your Mac?
    If you aren't sure, click the Apple menu icon  top left in your screen. From the drop down menu click About This Mac.
    Which version does it say?

Maybe you are looking for