Will PCI-CAN card work with only 2 wires?

If I'm using my PCI-CAN card configured for internal power, do I need to connect anything other than CAN-L & CAN-H to my CAN network? I'm doing this right now and am able to correctly receive packets thru the card. However, it appears that my transmitted packets are not being seen by the other nodes. I'll know more when my CANalyzer arrives, but I was wondering if my cabling is OK as-is.

I currently have a connection set up with only CAN-L and CAN-H wires connected. I am able to transmit and receive with no problems at 500kbs, so it should work as long as the lines are properly terminated. (120ohm resistor bridging the wires at both ends)

Similar Messages

  • Can Siri work with only wifi without installing SIM card in it?

    Can Siri work with only WiFi without installing SIM card in the iPhone 4S?

    I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it

  • Are there any PCIE CAN Cards Compatible with Labview RT?

    Hi,
    I am looking for a mini PCIE CAN card or PCIE 1X CAN card that will run under Labview RT.  Are any of you using a PCIEC AN card with Labview RT?
    Thanks,
    Phillip

    Hello Phillip,
    I do not believe that we have any PCIe CAN cards. Here is a link to the PCI CAN cards that will work on LabVIEW Real Time(http://sine.ni.com/np/app/main/p/bot/no/ap/icomm/lang/en/pg/1/sn/n24CI,n21:17,n17:icomm,n19:Real%20T...). Please let me know if you have anymore questions. Have a great day!
    Best Regards,
    Adam G 
    National Instruments
    Applications Engineer

  • Will these video cards work with CS5?

    Will any of these video cards work with Premiere GPU?
    GeForce GT 640
    GeForce GTX 650
    GeForce GTX 660 Ti
    GeForce GTX 670
    GeForce GTX 680     
    Thanks
    Brandon

    Yes, provided they have at least 1 GB VRAM. See for instance http://ppbm5.com/MPE%20Charts.php or http://ppbm5.com/DB-PPBM5-2.php
    Select Video Card / GeForce 600 Series and sort on the column header. There are no 640 cards yet.

  • Will Quadro 1000N card work with Mercury Playback Engine?

    The NVIDIA Quadro 1000M graphics card isn't listed as a recommended graphics card for running Premiere Pro CC 2014. Does anyone know if it will work with MPE?

    Not what I would recommend at all. There are far to many laptop solutions out there with Geforce 800 series chips and 900 series mobile are coming very soon.
    Eric
    ADK

  • Will this wireless card work with my g4?

    hi, I've been trying to find a good deal on a wireless card for my g4.
    but i don't know a lot about this sort of stuff, so could you tell me if this will work?
    thanks!
    http://www.newegg.ca/Product/Product.aspx?Item=N82E16833166021&cmsp=DailyDeal-_-33-166-021--Product

    Hi there!
    You need to be sure that this card supports the broadcomm chipset, as this will allow the card to be recognized as an airport extreme device, otherwise you might have to hunt for a compatible driver for the mac.
    You are better off with the G+ card from Belkin. The model of my card is a Belkin F5D7001 with the broadcomm chipset. You might have to do an in depth search to make sure that you find the right one.

  • Will this wireless card work with my G4 MDD?

    http://cgi.ebay.co.uk/AIRPORT-EXTREME-PCI-54M-WIFI-CARD-APPLE-POWERMAC-G3-G4W0QQitemZ150389507387QQcmdZViewItemQQptZUK_Computing_Apple_Mac_Accessories?hash= item2303e9c53b#ht_1245wt941
    Thanks in advance

    There are two cards intended for the Airport slot on two different G4 MDD models, and they are not interchangeable -- the two types of slots are different.
    Earlier model G4 MDD may only have the Airport slot that accepts the Original (802.11b 11 Mb/sec) Airport card. Later ones have the Airport slot for the Airport Extreme card.
    But the card you cited is not an Airport-slot card at all, but a PCI slot card, so is not subject to this slot limitation. But it may have System requirements, such as Mac OS X 10.3 or later
    Message was edited by: Grant Bennet-Alder

  • Will a double-wide PCIe video card work with my iMac?

    I have a 24-inch Aluminum iMac and plan on doing some serious gaming with it on Windows XP.
    1. If I were to buy a graphics card, such as the soon-to-come 9800 GTX, would it fit?
    2. What currently available NVIDIA GeForce 8800 and 9800 cards are Mac compatible?
    3. Would it void my warranty if I switched it out myself?
    4. Could I get a Genius at the Apple Store to put it in for me?
    UPDATED by dotBran
    Message was edited by: dotBran

    There are no solutions that are going to give you better graphics performance than the graphics processor built into your iMac. Any external solution for driving a display would have to connect via USB or Firewire, either of which would be significantly slower than the onboard video.
    Sorry, but if you want better graphics performance, you'll have to buy a different computer.
    Note, though, that adding RAM to your system (your profile says that you only have 1GB) will offer improvements in overall performance and is highly recommended if you intend to run Windows, either via Boot Camp or a virtualization solution (most especially the latter).

  • Will this video card work with my new lenovo desktop? please help!

    None of my games work on my new Lenovo Desktop due to the integrated factory GMA3100 graphics adapter! Can anyone tell me if the Radeon will work? Thanks!
    Desktop-
    Lenovo 3000 H210   57088851
    vista. (about 3 months old)
    video card-
    Radeon 9800 Pro 256 meg.
    Intel® Pentium® 4, AMD® Athlon® or higher with AGP 8X (0.8v), 4X (1.5V) or Universal AGP 3.0 bus configuration (8X/4X)
    Message Edited by mike114 on 05-01-2009 07:49 AM
    Solved!
    Go to Solution.

    I'm not sure- but it would appear that I'd have to buy a new power supply as well, since the factory one I think is only 265??? Which seems pretty low for a system with an Intel Dual Core, DVD burner, 500 gig HD & 4gigs of memory! Seems most PCI express gaming cards need atleast 300 watts-

  • Will airport extreme card work with my emac?

    I want to put an airport extreme card in my Emac. Please let me know if it will work in my machine. My Emac specs:
    Power PC G4
    CPU Speed: 800MHz
    L2 Cache: 256 KB
    Memory: 1Gb
    Bus Speed: 100MHz
    Purchase year: 2002 (before USB2)

    According to:
    http://docs.info.apple.com/article.html?artnum=107440
    Only the eMac ATI Graphics model and USB 2 models could take Airport Extreme.
    According to:
    http://www.designedinca.com/macs/emac/may2003/800cd/
    the ATI Graphics model replaced the August 2002 to May 2003 which was also 800 Mhz.
    Thus your machine was the one before the Airport Extreme became available:
    http://www.designedinca.com/macs/emac/aug2002/800/
    So no, you can't put an Airport Extreme card in it. You can though get Airport Extreme speeds via a LAN capable WiFi access point via its 10/100 ethernet port.
    You can also buy the original Airport card from:
    http://www.a1acomputing.com/usorapaicam7.html
    Message was edited by: a brody

  • Will these Video Cards work with my HP TouchSmart 600-1120?

    http://www.logicalblueone.com.au/store/mxm-graphics-cards/521-nvidia-geforce-gtx460m-15gb-gddr5-dedi...
    http://www.memory4less.com/m4l_itemdetail.aspx?itemid=1470772286&partno=A2G97AV&rid=90&origin=pla&gc...

    Sorry, NO these will not working your computer. Even if you found a compatible MXM HP graphics card, you would still need to replace the CPU heatsink/fan assembly to one designed for use with the additional GPU.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Can RAC work with only 1 node "temporarly"?

    Hi
    I have 2 nodes RAC , when node2 is off , node1 can't start , its crs hang
    is that normal , is that the design of RAC , and if that correct , so if node2 have an outage , should node1 be able to serve the appliation alone ?!
    Thanks

    and when i start rac2 , the crs on rac1 works and it works on rac2 as well
    here is the log of ocssd.log on rac1 after i started rac2
    [    CSSD]2009-09-06 14:50:41.984 [3019697040] >TRACE: clssnmRcfgMgrThread: Local Join
    [    CSSD]2009-09-06 15:17:51.524 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252711, LATS 963874, lastSeqNo 1252711, timestamp 1252214274/4294298960
    [    CSSD]2009-09-06 15:17:53.205 [131464080] >TRACE: clssnmConnComplete: MSGSRC 2, type 5, node 2, flags 0x0001, con 0x98eae78, probe (nil), nodekillsz 0
    [    CSSD]2009-09-06 15:17:53.205 [131464080] >TRACE: clssnmConnComplete: node 2, rac2, con(0x98eae78), probcon((nil)), ninfcon((nil)), node unique 1252214272, prev unique 0, msg unique 1252214272 node state 0
    [    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmsendConnAck: node 2, node state 0
    [    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmSendConnAck: connected to node 2 , ninfcon (0x98eae78), state (0)
    [    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmConnComplete: connecting to node 2 (con 0x98eae78), ninfcon (0x98eae78), state (0)
    [    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmConnComplete: ninf->killinfosz 0
    [    CSSD]2009-09-06 15:17:53.681 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252712, LATS 966024, lastSeqNo 1252712, timestamp 1252214276/4294300300
    [    CSSD]2009-09-06 15:17:55.953 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252713, LATS 968294, lastSeqNo 1252713, timestamp 1252214278/4294302220
    [    CSSD]2009-09-06 15:33:47.231 [61832080] >TRACE: clssnmReadDskHeartbeat: node 3, rac3, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 58771, LATS 1919434, lastSeqNo 58771, timestamp 1252215232/4294269600
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >WARNING: clssnmLocalJoinEvent: takeover succ
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmDoSyncUpdate: Initiating sync 0
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmDoSyncUpdate: diskTimeout set to (29997000)ms
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (11)
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ALIVE
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ALIVE
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Incarnation 0
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 1 incarnation 144596742
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 2 incarnation 144596742
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 3 incarnation 144596742
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Incarnation set to 144596743
    [    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSendSync: syncSeqNo(144596743)
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(11), ackCount(2)
    [    CSSD]2009-09-06 15:33:48.142 [131464080] >TRACE: clssnmHandleSync: diskTimeout set to (29997000)ms
    [    CSSD]2009-09-06 15:33:48.142 [131464080] >TRACE: clssnmHandleSync: Acknowledging sync: src[1] srcName[rac1] seq[1] sync[144596743]
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(11)
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmNeedConfReq: No configuration to change
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmDoSyncUpdate: node(1) is transitioning from joining state to active state
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmDoSyncUpdate: node(2) is transitioning from joining state to active state
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (13)
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
    [    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSendVote: syncSeqNo(144596743)
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(13), ackCount(2)
    [    CSSD]2009-09-06 15:33:48.143 [131464080] >TRACE: clssnmSendVoteInfo: node(1) syncSeqNo(144596743)
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(13)
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmCheckDskInfo: Checking disk info...
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmCheckDskInfo: diskTimeout set to (29997000)ms
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmEvict: Start
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitOnEvictions: Start
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (15)
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
    [    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSendUpdate: syncSeqNo(144596743)
    [    CSSD]2009-09-06 15:33:48.150 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(15), ackCount(2)
    [    CSSD]2009-09-06 15:33:48.150 [131464080] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
    [    CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 1, state (2/3) unique (1252212629/1252212629) prevConuni(0) birth (144596743/144596743) (old/new)
    [    CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 2, state (2/3) unique (1252214272/1252214272) prevConuni(0) birth (144596743/144596743) (old/new)
    [    CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 3, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
    [    CSSD]2009-09-06 15:33:48.237 [3086318064] >USER: NMEVENT_SUSPEND [00][00][00][00]
    [    CSSD]2009-09-06 15:33:51.312 [131464080] >TRACE: clssscInitSAGEFencing: kgzf fence initialization successfully started
    [    CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: SYNC(144596743) from node(1) completed
    [    CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: NODE 1 (rac1) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: NODE 2 (rac2) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2009-09-06 15:33:51.312 [131464080] >TRACE: clssnmHandleUpdate: diskTimeout set to (29997000)ms
    [    CSSD]2009-09-06 15:33:51.312 [131464080] >WARNING: CLSSNMCTX_NODEDB_UNLOCK: lock held for 3170 ms
    [    CSSD]2009-09-06 15:33:51.321 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(15)
    [    CSSD]2009-09-06 15:33:51.522 [131464080] >TRACE: clssnmConnComplete: MSGSRC 3, type 5, node 3, flags 0x0001, con 0x97d53f8, probe (nil), nodekillsz 0
    [    CSSD]2009-09-06 15:33:51.523 [131464080] >TRACE: clssnmConnComplete: node 3, rac3, con(0x97d53f8), probcon((nil)), ninfcon((nil)), node unique 1252215231, prev unique 0, msg unique 1252215231 node state 0
    [    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmsendConnAck: node 3, node state 0
    [    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmSendConnAck: connected to node 3 , ninfcon (0x97d53f8), state (0)
    [    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmConnComplete: connecting to node 3 (con 0x97d53f8), ninfcon (0x97d53f8), state (0)
    [    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmConnComplete: ninf->killinfosz 0
    [    CSSD]2009-09-06 15:33:53.021 [3019697040] >TRACE: clssnmDoSyncUpdate: Sync 0 complete!
    [    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssgmReconfigThread: started for reconfig (144596743)
    [    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: KGZF: context successfully initialized, API version 1.1
    [    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
    [    CSSD]2009-09-06 15:33:53.027 [2988227472] >USER: NMEVENT_RECONFIG [00][00][00][06]
    [    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssgmEstablishConnections: 2 nodes in cluster incarn 144596743
    [    CSSD]2009-09-06 15:33:53.236 [3051432848] >TRACE: clssgmInitialRecv: (0x97d0798) accepted a new connection from node 2 born at 144596743 active (2, 2), vers (11,1,1,2)
    [    CSSD]2009-09-06 15:33:53.236 [3051432848] >TRACE: clssgmInitialRecv: conns done (2/2)
    [    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmEstablishMasterNode: MASTER for 144596743 is node(1) birth(144596743)
    [    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
    [    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 144596743 with 2 nodes
    [    CSSD]CLSS-3001: local node number 1, master node number 1
    [    CSSD]2009-09-06 15:33:53.387 [2988227472] >TRACE: clssgmReconfigThread: completed for reconfig(144596743), with status(1)
    [    CSSD]2009-09-06 15:33:53.435 [156081040] >TRACE: clsc_event_hndlr: (0x98365f8) answer error, rc 15
    [    CSSD]2009-09-06 15:33:53.436 [156081040] >TRACE: clsc_event_hndlr: (0x98365f8) answer error, rc 15
    [    CSSD]2009-09-06 15:33:55.124 [156081040] >TRACE: clssgmCommonAddMember: clsomon joined (1/0x1000000/#CSS_CLSSOMON)
    [    CSSD]2009-09-06 15:33:56.891 [131464080] >TRACE: clssnmHandleSync: diskTimeout set to (29997000)ms
    [    CSSD]2009-09-06 15:33:56.891 [131464080] >TRACE: clssnmHandleSync: Acknowledging sync: src[2] srcName[rac2] seq[1] sync[144596744]
    [    CSSD]2009-09-06 15:33:56.893 [3019697040] >TRACE: clssnmRcfgMgrThread: initial lastleader(2) unique(1252214272)
    [    CSSD]2009-09-06 15:33:56.893 [3086318064] >USER: NMEVENT_SUSPEND [00][00][00][06]
    [    CSSD]2009-09-06 15:33:57.006 [131464080] >TRACE: clssnmSendVoteInfo: node(2) syncSeqNo(144596744)
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 1, state (3/3) unique (1252212629/1252212629) prevConuni(0) birth (144596743/144596743) (old/new)
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 2, state (3/3) unique (1252214272/1252214272) prevConuni(0) birth (144596743/144596743) (old/new)
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 3, state (1/3) unique (1252215231/1252215231) prevConuni(0) birth (0/144596744) (old/new)
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: SYNC(144596744) from node(2) completed
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 1 (rac1) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 2 (rac2) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 3 (rac3) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmHandleUpdate: diskTimeout set to (29997000)ms
    [    CSSD]2009-09-06 15:33:57.130 [2988227472] >TRACE: clssgmReconfigThread: started for reconfig (144596744)
    [    CSSD]2009-09-06 15:33:57.130 [2988227472] >USER: NMEVENT_RECONFIG [00][00][00][0e]
    [    CSSD]2009-09-06 15:33:57.131 [2988227472] >TRACE: clssgmEstablishConnections: 3 nodes in cluster incarn 144596744
    [    CSSD]2009-09-06 15:33:59.759 [3051432848] >TRACE: clssgmInitialRecv: (0x9900bb0) accepted a new connection from node 3 born at 144596744 active (3, 3), vers (11,1,1,2)
    [    CSSD]2009-09-06 15:33:59.759 [3051432848] >TRACE: clssgmInitialRecv: conns done (3/3)
    [    CSSD]2009-09-06 15:33:59.760 [2988227472] >TRACE: clssgmEstablishMasterNode: MASTER for 144596744 is node(1) birth(144596743)
    [    CSSD]2009-09-06 15:33:59.760 [2988227472] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2009-09-06 15:33:59.795 [2988227472] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 144596744 with 3 nodes
    [    CSSD]CLSS-3001: local node number 1, master node number 1
    [    CSSD]2009-09-06 15:34:00.200 [2988227472] >TRACE: clssgmReconfigThread: completed for reconfig(144596744), with status(1)
    Thanks

  • Will this graphics card work with Premiere CS5.5

    We're running a Mac Pro 2 x 2.93 GHz Quad-Core Intel Xeon, 32GB Ram, 10.6.8 and we're looking to move from Apple's FCP to Premiere CS5 but noticed in Adobe's systems requirements on graphic cards the following:
    Adobe-certified GPU card for GPU–accelerated performance; visit www.adobe.com/go/premiere_systemreqs for the latest list of supported cards
    Here's the list of cards for Mac:
    GeForce GTX 285 (Windows and Mac OS)
    Quadro FX 4800 (Windows and Mac OS)
    Quadro 4000 (Windows and Mac OS)
    I don't see any ATI cards and we have a top of the line ATI Radeon HD 4870 this the work station. (link of card specs below)
    http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-4000/hd-4850/Pages/ati-radeo n-hd-4850-specifications.aspx
    Does anyone know if the ATI Radeon HD 4870 will work or are there any limitations?

    Martin Jordan wrote:
    So you're saying that the "Quadro 4000 (Windows and Mac OS)" is the best choice to upgrade from my ATI card?
    If you're doing things that will take advantage of the hardware within PPro, then yes.  But before you open your wallet, make sure what you're doing will be able to take advantage of the CUDA processors.
    jas

  • How do I get my PCI-CAN card to work in my Dell computer?

    I am trying to get a PCI-CAN card working in a Dell GX110 computer. The computer quits right after the initial Dell spalsh screen goes away. After that point, I only get a flashing cursor in the top left corner. NI support suggested a bios upgrade, but the computer is already at the latest bios rev. When I remove the card, the computer boots fine. What do I try next?
    Lars

    The problem may be related to a specific chip ( MITE) on the PCI CAN card. Please call us at 512-795-8248 with the part no and the serial of the PCI CAN card, so that we can verify whether the CAN card may have a hardware problem and have you send the card back to us for repair or to get a replacement.

  • Will ATI Radeon HD 5800 card work with Premier Pro CS5 Mercury engine?

    Hi There:
    I've been using Premeier Elements 7 for the last 2 years and am about to buy Premeier Pro CS5. But having read the video card requirements I'm confused.
    Will my video card work with PP CS5 and the Mercury playback engine? My card is the ATI Radeon HD 5800 with 1 gig memory?
    The dealer specifically sold me that 18 months ago so I would be able to move to Premiere Pro with no problem. I have an Intel Core 17 with 10 gigs of ram and a great ASUS motherboard.
    Thanks,
    Rudy

    Hi Harm:
    Thanks for the reply. I checked my RAM and in fact it is 12 gigs. I got it put in 18 months ago when I bought the system. I had to use Windows XP back then. Anyway, I now need to change to Windows 7 and Premiere Pro.
    I had no idea back then that I was buy the wrong video card for Premiere Pro.
    I am not familiar with the terms you and the other two respondants have used in your replies, and I have no idea what it means that my system will run 10 times slower than if I had a NVIDIA, whatever it means it sounds bad. Which is really too bad because I spent a small fortune buying one of the fastest card available at the time.
    What do you suggest I now do?
    1) Just use my system as is? It sounds like my performance will be terrible, so should I really go this route? I will be editing MPG2 codec from a Canon XF100 shot at 50 mbps.
    2) Should I try to sell off my ATI card and buy one of the recommended cards?
    3) Should I just go to the Sony Vega Pro systems?
    Your suggestions would be greatly appreciated.
    Thanks
    Rudy

Maybe you are looking for

  • Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

    I am running an environment with an Active Directory and Terminal Servers. I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further. The fixes I found are related to local u

  • Create personnel subareas

    Hi experts, I just enrolled the course SAP HR module and hope you won't think my questions too stupid. I tried to create my personnel subareas from SPRO's enterprise structure. This was what I wanted to do: Personnel area: 0000 Personnel subarea: 01,

  • De-install FCP?

    Can anyone give me instructions for a de-install of FCP 6.0.5 as I want to do a re-install, Thanks, Marcel

  • Move to error queue after certain redelivery limit

    Hi,           I am newbie to Weblogic. I am currently using Weblogic8.1.4.           I have written an MDB say mdbx which listens on a specific queue say QA, once it receives a message it will send this message to another queue QB. I have configured

  • Illustrator CC is acting strange

    Video link: http://www.youtube.com/watch?v=rhbUQc28nPw&feature=youtu.be Basically sometimes when trying to move certain objects around illustrator they just will not move to certain spots the video explains it. Any help is greatly appreciated. Thanks