Will Portal 4.0 SP1 run on WLS6.1 SP3?

Currently we are running Portal SP1 on WLS6.1 SP2. Since we have customized
some of the framework code, it appears the SP2 may not be extremely simple,
but that the upgrade to SP3 for server should be simple. Just curious if it
is supported.

Thanks Old Toad & Eric for taking the time to help me figure out why iPhoto 5.0.4 would not load properly on my iBook.
I the cold light of day today, for some reason, I decided to unplug all the devices connected to the iBook except the internet cable. No ex. drive, no Firewire etc.
Bingo! iPhoto launched perfectly & I created a new library. Now it will be trial and error to see what iPhoto does not like in terms of periferals.
Thanks guys,
Gethin

Similar Messages

WL Portal 4.0 SP1 & RedHat 7.1: Install Failure

Hi.
I was trying to install WL Portal 4.0 SP1 in Redhat 7.1.
The steps I first made were:
1. jsdk1.4 install
2. WL Server 6.1 SP2 install in directory "/usr/bea"
In the installation script of the Portal, after choosing to use the pre-existing
BEA directory ("/usr/bea"), I got the following error:
Weblogic Server 6.1 Not Installed
------------------------------------------------------------ WebLogic Server 6.1
is a prerequisite for this installation. You do not seem to have it installed
to /usr/bea
NOTE: I has using console mode installation
Thanks in advance,
Renato

Renato,
The WebLogic Portal 4.0 SP1 installer cannot figure out where
WebLogic Server 6.1 is installer. On Linux, the installer reads
the beahomelist file under the $HOME/bea directory. That means
that if you use different user to install WebLogic Server 6.1 than
the user you are using for WebLogic Portal 4.0, then it will not
find where WLS is installed. You can either use the same user
account or create the beahomelist with one line that indicates the
location (directory of your BEA_HOME) under $HOME/bea directory.
Also, I noticed that you tried with J2SE 1.4. Keep in mind that
WebLogic Portal 4.0 SP1 has not been tested and certified with
that version and that you might run into problems.
Hope this helps,
Michel.
"Renato Torres" <[email protected]> wrote in message
news:3cb6f76a$[email protected]..
>
Hi.
I was trying to install WL Portal 4.0 SP1 in Redhat 7.1.
The steps I first made were:
1. jsdk1.4 install
2. WL Server 6.1 SP2 install in directory "/usr/bea"
In the installation script of the Portal, after choosing to use thepre-existing
BEA directory ("/usr/bea"), I got the following error:
Weblogic Server 6.1 Not Installed
------------------------------------------------------------ WebLogicServer 6.1
is a prerequisite for this installation. You do not seem to have itinstalled
to /usr/bea
NOTE: I has using console mode installation
Thanks in advance,
Renato

LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows - Supported Features

Hi,
Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows]
1) Is there a limit on the size of the exe which can be run on it?
2) Will this support additional modules like DAQ etc.,? Or do we have to chose the regular installer ( 170 Mb ) for that purpose?
3) If a list of what it does or does not support is available, it would be extremely helpful.
Thanks In advance.
Regards,
Vijay

Anand,
I did go through both the links that you had sent earlier before posting on the forum. For eaxample refer the following link where it says,
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1599
It does not contain the full run-time engine, but will allow some executables to run.
1) What do they mean by 'some' executables. Is there a list of yay's and no's available?
2) Can someone from NI reply to this and shed more knowledge?
Regards,
Vijay

Announcement: LabWindows/CVI 2010 SP1 Run-Time Engine Updated

A new version of the LabWindows/CVI 2010 SP1 Run-Time Engine (10.0.1.434) is now available for download. The new version includes Security Update 5Q5FJ4QW which resolves security vulnerabilities in components installed with LabWindows/CVI 2010 SP1 and earlier and LabVIEW 2011 and earlier. Further details can be found at KnowledgeBase Article 5Q5FJ4QW: How Does National Instruments Security Update 5Q5FJ4QW Affect Me? Installing the security update will have the same effect as installing the new version of the Run-Time Engine.
The update can be downloaded from the Drivers and Updates page. The LabWindows/CVIRun-Time Engine is a free download.
National Instruments
Product Support Engineer

The correct link should be this one
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?

As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?

As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?

Will I be able to run Windows XP on a virtual machine (such as VirtualBox) in Mountain Lion?

Hello. Will I be able to run Windows XP on a virtual machine (such as VirtualBox) in Mountain Lion? Currently, I have a Late-2009 MacBook with Snow Leopard, and I am planning on installing VirtualBox and Windows XP soon, then I'm planning on upgrading to Mountain Lion afterwards. Thanks.

Yes.

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lighroom 5 if I upgrade from Snow Leopard to Lion?

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.

Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine.

Macbook will not boot up after running Software Update

My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?

Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.

I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.
This also happened when I tried to download Firefox 4.
Firefox 3.6.18 works fine

You may need to delete the Firefox program folder before (re)installing the latest Firefox.<br />
In case you still have problems after installing then check your security software.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Browser_will_not_start_up

My iPhone5 is my wifi hot spot for my mac mini computer and iPad. I live in a rural area. Will this be sufficient to run apple tv and air play?

My iPhone5 is my wifi hot spot for my mac minim computer and iPad. I live in a rural area with no other options. Will this be sufficient to run Apple TV and air play?

If you are intending using your hot spot to download movies for the Apple TV, you'll very quickly eat through your data allowance.

The dowload of firfox will not move past the run screen

I have been trying to install Firefox to my desktop. The dowload will not progress past the run screen. There is no set up. I successfully installed on my second computer so I am confused.

I believe you have Voice Over on:
You have to tap, then double-tap to select the numbers to enter your passcode.
Then:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

What is the oldest generation of iPad that will still allow me to run IOS8 and allow for future IOS updates?

Buying a used iPad... what is the oldest generation of iPad that will still allow me to run IOS8 and allow for future IOS updates?
Thanks

An iPad 2 will do it...for awhile. Realize that it's seemingly on it's last legs as far as iOS updates go and performance will not be great enough for today's demanding games. Also realize that a big part of running apps smoothly is how much system RAM (the memory area that the apps actually run in) the device has. The iPad 2 has 512 MB which is adequate for most apps but not for some. The iPads above the iPad 2 all have 1 GB of system RAM and the iPad Air 2 has 2 GB.
The time will come when the iPad 2 can no longer be updated past a certain iOS version (as the iPad 1 is) so it will be more difficult to keep up with apps that you want to be using. This will eventually happen to ALL devices so you'll have to judge if you want to be at the tail-end of iOS updates or at least have a bigger buffer with a newer iPad.

Once I upgrade my iMac 10.6.8 snowleoprd to mavericks will I be able to run my Lroom3 and PsCS5.1?

Once I upgrade my iMac 10.6.8 snowleoprd to mavericks will I be able to run my Adobe Lroom3 and Ps CS5.1 with no problems?

according to this reliable compatibility chart, they should run fine in Mavericks: http://roaringapps.com/apps
you can type in "lightroom" and "PS 5.1" in the search bar to see for yourself.

Will Portal 4.0 SP1 run on WLS6.1 SP3?

Similar Messages

Maybe you are looking for