Will Project Budget be available again after settlement to AUC/final asset?

I would like to know if my project budget will become available again once I settle costs to AUC and to Final asset (or settle directly to final asset w/o AUC). 
Letu2019s say my original budget for WBS is 5000, cost was posted to the WBS u2013 4000, now I settle the 4000 cost to AUC (and eventually from AUC to final asset).  Will this mean the entire 5000 will be available again since the cost has been settled from WBS to AUC (and eventually fixed asset)?
Thanks!
Vivian

If you have Budgeted WBS element and than after  you does any cost postings against that WBS. you budget get consumed by that actual cost.
however, WBS element is capturing cost for the period of project duration that cost has to transfer to FI/ CO , finally so, at the period-end we does the settlement & transfer taht cost to cost center , PA , asset etc....
So, no point that after settlement your budget will be your initial budget.
Regards
Nitin

Similar Messages

  • CJ88 Cannot proceed with FUL settlement to Final asset

    We have a PO with WBS as account assignment. Users posted a down payment to this PO in 12/2010 and when they ran the settlement Type 1 (Automatic) it posted a DP posting to the AUC transaction type 180.
    In Standard SAP transaction, this will get reversed if the users post the invoice and executes CJ88 again.
    Now, our problem is that, the invoice was not posted until now, and the DP is still open in the AUC. THey want to do  settlement to the final asset but is getting an error CJ88 type 3 (FULL)
    *ORIGINAL Error:* You cannot post comp. retirement for asset 102000121 0 with this trans.type
    Message no. AA341
    Diagnosis
    A down payment was posted to asset 102000121 0. In depreciation area 01, if not elsewhere, all down payments were not cleared.
    Procedure
    Before posting a complete retirement on this asset, you have to first clear the down payment in all depreciation areas.
    FY 2010 is now closed in asset. I tried posting an ofsetting entry for the DP on FY2011. I used ttype 181. I tried to re-setlle type 3 (FULL) but now, the error message refers to Area 32
    *AFTER POSTING TTYPE 181:*You cannot post comp.retirement for asset 102000121 0 with this trans.type
    Message no. AA341
    Diagnosis
    A down payment was posted to asset 102000121 0. In depreciation area 32, if not elsewhere, all down payments were not cleared.
    Procedure
    Before posting a complete retirement on this asset, you have to first clear the down payment in all depreciation areas.
    Our Dep area 32 is configured to take values from 01 but reflect it in USD and it is set to AREA NOT POST.
    Does anyone have any thoughts why the system is checking area 32 if its deriving values from 01?
    Additionally, how can i clear the DP in 2010, with a posting in 2011 and be able to execute the settlement to final asset.
    Thanks

    Hi,
    Please review the note 35309.                                                                               
    As the long text of the error suggests, the cause for this error is  most likely down to downpayments which are not yet settled.                                                                               
    In general the settled down-payments and their clearings should be balanced to ZERO in the settlements.
    In investment measures with summary settlement you will always get  the error AA341, if the down-payment balance is not zero.
    Regards Bernhard

  • Settling Negative AUC

    Hello
    I am trying to settle an AUC to the final asset via KO88. I got the system to allow negative values for AUC but when i try to settle to the final asset i get the error
    AA617- Acquisition value negative in area 01.
    I have set the indicator of negativa values allowed for the asset class and in OADB, i have all the flags checked.
    I cant understand what the issue is. Can some one please advice

    Hallo
    could you please give the more details for this issue , i have same issue have resolve .
    same erroe nagative balance in dep area 01 , aa 617
    i could not undersatbd oss note 48886 , so please give detilas , how did you used that note
    i will give more point for same

  • Settle an AuC with investment support

    Hello Gurus,
    I have the following problem:
    I have some AuC with investment support measure assigned.
    If I settle the AuC created in prior-years the system settle the costs and the investment support to the final assets but If I try to settle an asset created this year, the system does not settle the investment support to the final asset.
    I need that when the asset under construction is created and settled to a final asset (within the same year), the investment support iis posted to the final asset aswell.
    Thanks alot for your help.
    Christine

    Normally settlement  needs to be performed twice, if the investment support measure is there.
    1) for Investment object to AUC ie WBS / IO to AUC. This called automatic /AUC settlement.
    2) From AUC to Final Asset: This is called final / periodic settlement.
    But both these settlement needs to be executed with KO88/ CJ88.

  • HT4897 I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?

    I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?
    I'm trying to make iCloud mail my primary email but I'm concerned that I may have lost the perfect email address forever.

    I have the same problem. After our wedding I've created an alias ([email protected]) to my actual AppleID Account ([email protected]). Now I'd the idea to delete the alias and my actual AppleID to create a new AppleID with ([email protected]).
    Is there really no possibilty to do this?
    Thanks in advance for quick and positive feedback.

  • CJ88 - Balance the budget back after settlement

    I got out the following structure:
    WBSE
    --- WBSE1
    --- WBSE1-2 -> AUC Settlement to
    --- WBSE2
            | --- WBSE2-2 -> Settlement to WBSE1-2
    When the Execute CJ88 to liquidate the project, the following problem is occurring.
    The WBSE2-2 is the value to the liquidating WBSE1-2 and turn the whole WBSE1-2 net value for the AUC.
    Upon conclusion of the budget process that had been consumed in WBSE2-2 and released novamentepara be consumed.
    Therefore necessary that the amount realized on WBSE2-2 is settled in the AUC of WBSE1-2, more than the budget is consumed in dayValue WBSE2-2 instead of being available again.
    All are WBSE account assignment.
    Edited by: André Luis Pereira Santos on Mar 18, 2011 3:01 AM

    just I want to know what could be the reason for dfference for target cost debit and target cost credit in process order. As both are from standard cost estimation.
    in reality our header material cost is nothing but BOM components + operational cost which are used in standard cost estimattion.
    there by there should not be any difference.
    regs,
    ramesh

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

    Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

    The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4

  • Iphone 5S 32gb gold seems out of stock everywhere, when will it be available again in Mumbai??

    Iphone 5S 32gb gold seems out of stock everywhere, when will it be available again in Mumbai??

    hey thanks Alan, I contacted istore and other good retailers in mumbai but they said they haven't received stock from Apple and cant tell when it will be available again....what can be done in this case??

  • When will iCloud push mail in Germany be available again?

    Hello,
    When will iCloud Push Mail be available again in Germany?
    As far as a know, Apple and Motorola(Google) stopped fightig about this issue.
    Thanks for your answers
    Denis

    Strange decision indeed. The Envy 17 is too big and heavy to carry around and the new Spectre seems to miss some power.
    I guess I'm going for the Samsung Series 7 now...

  • TS1398 Hi. My wifi keeps disconnecting. I kkep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

    Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

    Is this happening with one particular network or with all?  Make sure iOS is updated on the device.
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

  • Who is on strike and when will the iphone 5 be available again?

    We are unable to purchase the iphone 5 at Best Buy through AT&T because someone is on strike?  Who? and When will it be available again?

    A simple google search would find an answer:
    Foxconn workers strike over iPhone 5 demands, labor group says ...
    Foxconn denies China iPhone plant hit by strike | Reuters

  • Will C4D R16 LITE be available with After Effects CC?

    hi!
    Until now, the C4D versione in bundle with AE CC is R14 lite. Will R16 lite be available as free update for AE CC's owners?
    Thanks
    Best
    Domenico

    The plan is for the version of Cinema 4D Lite that comes with the next version of After Effects to be Cinema 4D Lite R16. There are also some new features coming in the Cinema 4D integration with After Effects that should make the workflow significantly better.

  • HT201363 Dear Reader  I have forgotten the answers to my security-questions. So it says that i will get an e-mail to reset my questions, but i have not gotten an e-mail? So i tried it again (after a month) and it still doesen't work. I really need to know

    Dear Reader
    I have forgotten the answers to my security-questions. So it says that i will get an e-mail to reset my questions, but i have not gotten an e-mail?
    So i tried it again (after a month) and it still doesen't work. I really need to know what's wrong :/
    Thank You for helping me

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • My iphone 4s in unlocked and i am currently using it for tmobile prepaid service. i want to restore the 7.0 settings back to 6.1.3 .. will this lock my iphone 4s once again after i restore it back to 6.1.3?

    My iphone 4s in unlocked and i am currently using it for tmobile prepaid service. i want to restore the 7.0 settings back to 6.1.3 .. will this lock my iphone 4s once again after i restore it back to 6.1.3?

    Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
    If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

Maybe you are looking for