Will PSE 13 open CR2 Files from my Canon 7D?

I've just upgraded my camera from a 550d to a 7D Mk II and the new CR2 files will not open in PSE 10. Before I upgrade to PSE13 I want to check that the files will open. Any advise gratefully received.
Thanks
Bob

Hi,
Yes, well it reads mine.
You can always check it out by downloading the trial version from here
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
Once you have downloaded and installed PSE 13, you will need to go to the Help menu and select Updates as you will need the camera raw to be updated.
Brian

Similar Messages

Need camera raw 6.7 so I can open CR2 files from my Canon 5d mark iii

I purchase PS CS5 and says my camera is compatible and it will not open up the CR2 camera raw files from my canon 5D Mark iii camera. I used it in the past, and up graded my hard drive to MAC OSX 10.9, purchased new PS CS5 and Adobe will not update the Camera Raw 6 to 6.7 which using my files...

Hi redtulips54,
There you go. Download the one you need, depending on your operating system.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Hope that Helps.
Cheers!
~ Arpit

Will Lightroom 5 open RAW files from a Canon EOS 70 D

I Have a Canon EOS 70D elements 10 will not open RAW files from this camera will Lightroom 5 open these without having to use another program such as adobe DNG converter ?

Have a look here: Camera Raw plug-in | Supported cameras
Since Lightroom v5.2

Can not open CR2 files from a Canon 600D in PSE

Hi
Ok i will put my hand up and say i am very new to PSE, I have updated the software and have the latest camera raw plug in, but for some reason i can not open the raw files created by my 600D.
Can anyone help, or am i going to have to convert them.
Sorry if this has been asked before, but i couldn't find any posts
Chris

The 600D should be supported in ACR 6.4 which is currently in beta so you'll have to wait until it's released, probably within days or weeks, for native support within Elements.
While you're waiting, you can download the beta version of the DNG Converter 6.4 from Adobe Labs and use that to convert your CR2 files to DNGs which will open in older versions of Camera RAW.
http://labs.adobe.com/
Follow the Camera RAW 6.4 RC link and eventually you'll get a link to download the DNG Converter 6.4 RC.
The Camera RAW 6.4 RC installer will only run if you have Photoshop, not Elements, so you can't use that, yet, but you can use the DNG Converter.
Because the DNG Converter and Camera RAW 6.4 are in beta status there could be differences in how the RAW photos look compared to when you get the released version of ACR 6.4 but probably not too much difference.

Had to reload cs3 to my laptop. now I can not open cr2 files from my canon d50

I think I am thick. I have tried a number of ways but to no avail. I need a step by step tutorial.

It sounds like you put the zip folder into
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS3\File Formats
Go to the above folder and move everything out of that folder onto your desktop, then right click on the Camera_Raw_4_6.zip
and choose Extract All.
Then when the Extract dialog comes up check Show extracted files when complete
Then in the next dialog that comes up, right click on the Camera Raw .8bi and choose Copy
Then go to
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS3\File Formats
and right click in an empty space and choose Paste
Now hopefully when you start or restart photoshop cs3, your files will open.

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

How to open *.CR2 files from new 60D ??

My Elements 7 will not open or recognize CR2 files from my new 60D. Nor will it allow me to open CR2 files in another format. I get error messages saying they are "the wrong type of file" or that a codec is missing. It opens CR2 files from my two Rebels just fine. I have downloaded the most recent codec (1.7.0) I can find from Canon to no avail. I downloaded a trial version of Elements 9 - same problem. Am I doing something incorrectly?
Thanks, JackM

Well, after downloading - and purchasing - PE9, and downloading ACR 6.2, am still having the same problem; not recognizing the 60D CR2 files. I have actually downloaded the 6.2 several times, with and without unzipping and extracting files, to no effect. I will try calling Adobe Monday to see what the heck is going on. This is extremely disappointing.
I may have to resort to use DPP for raw conversion, save as a TIFF, then open in PE for editing (this does work). If that's my only option, I hope Adobe will refund my purchase price. I'll try to keep you updated on what happens.
Thanks for your help.
JackM in Omaha

Can't open cr2 files from my 5D but can from my 20D

i just got a new computer (windows vista) and on my old computer i could open cr2 files from both my 20d and my 5d just fine. but now on my new computer i can't open the cr2 raw files from the 5d but can from the 20d. I have photoshop cs2. I am not planning to upgrated to cs3 anytimes soon, do I just need to install a plug in? Please help.

Kristen,
No, no, no. The DNG Converter is a stand-alone executable program. You can even put it on your desktop. You would need it only if your camera model is NOT supported by ACR 3.7, which is the latest version you can use with Photoshop CS2.
In that case, you would use the DNG Converter to convert your raw images to DNG files first and then opening the DNG files in ACR 3.7.
Now, the ACR 3.7 plug-in has to be installed in the correrct location, which is where the old ACR plug-in resides. You will be replacing that old, obsolete ACR plug-in (while Photoshop is NOT running).
[The default Photoshop installation comes with and installs that obsolete ACR plug-in.]
Read the instructions on the download page very carefully, and refer to the FAQs of this forum on the same page where you added this topic.

Can i open raw cr2 files from my canon 70d in photoshop elements 12 as my elements9 wont?

I am struggling to open photos from my canon 70d in elements9 will elements12 open them?

Yes, pse 12 will open the files from a canon 70D
(after the camera raw plugin is updated using Help>Updates in the pse 12 editor)
In the meantime, you can use the free adobe dng converter to convert your 70D files to dng copies, which pse 9 should then open.
windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
How to use the adobe dng converter:
Camera Raw: How to use Adobe DNG Converter - YouTube

I have Lightroom 3.6 and Camera Raw 6.6 but I can't open my CR2 files from my Canon eos 6D

Hi,
I have Lightroom 3.6 and Camera Raw 6.6 but I can't open my CR2 files from my Canon eos 6D
Lightroom doesn't show a thumbnail image and when trying to import it says the camera format isn't supported. But normaly Camera raw 6.6 should cover the Canon eos 6D
All help is welcome,
Thanks

No, the older versions are not free. If you upgrade you will have to get Lr5 unless you can still find Lr4 for sale somewhere as it has been discontinued by Adobe. You can also use the FREE DNG converter to convert the 6d files for use in Lr3.6.

I am trying to import CR2 files from my canon 450D. Lightroom 5 won't let me. Help please!!

I am trying to import CR2 files from my canon 450D into Lightroom 5. Lightroom says 'preview unavailable for this file'. I cannot get past this. I have tried importing directly from the camera, and also from an external hard drive that I managed to download the photos onto. I am new to Lightroom so any simple suggestions would be greatly appreciated!! Also I am working on a Mac. Thanks!

I have a 450D and the files open just fine in LR5.
Is this your first attempt at using LR or your first attempt at developing CR2 files?
It sounds like your raw files may be corrupted or there is some permission problem that is preventing LR from reading the files.
Can you upload one of these unrecognized files to http://www.dropbox.com/ and post a public download link to it, for others to test?
Also try copying just one CR2 file to your internal drive and see if that imports, in case there is some problem with the permissions on the external drive. Just use Finder to copy the file, not LR, in case that is an issue.

How do I open raw files from my Canon 6D in Photoshop CS5.1?

Just tried to open raw files from my Canon 6D in Photoshop CS5.1. An error message appeared: "
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information." Is there a simple solution?

You cannot, nor will you ever be able to open your Canon raw files directly in CS5.1. Your camera model requires at least ACR 7.3 which only works with CS6, or Lightroom 4.3. There will be no further updates for CS 5.1 ever.
Your choices are (1) to upgrade to CS6, or (2) to download the latest version of the Adobe DNG Converter, currently 7.4, and convert your Canon raw files to raw DNG files that you can then open in your CS5.1.
You should also know that the rendering in ACR 7.4 is far superior tou the raw conversion in ACR 6.x, so you would be leaving a lot of image quality on the table if you go the (free) DNG Conversion route.

How do I upgrade elements 10 to open raw files from my Canon 70d?

How do I upgrade elements 10 to open raw files from my canon 70d?

Normally, if there are any updates for your version of PSE then they should be offered to you automatically. However, you can also check if there are any new updates by going to:
Help >> Updates
If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market. We are currently at version 13 so version 10 was stopped long time ago. However, you can see a workaround at this link where I posted a video to get things moving:
<Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
Hope this helps.

Can't open RAW files from a Canon 70D

Can't open RAW files from a Canon 70D with Photoshop Elements 12. Is there an upgrade / download available. Current RAW plug in is version 8.0.0.137

What operating system are you using?
The newest version of camera raw for pse 12 is version 8.4, which should open the canon 70D files.
Have you tried Help>Updates from within the pse 12 editor?

Bridge won't open raw files from my canon mark iii

Bridge won't open raw files from my canon mark iii? Are you kidding adobe? This camera has been out for over six months. Why isn't it loaded into the program? This camera is sooo main stream!

What Mark III?
Are you referring to the Canon EOS 1D Mark III or the Canon EOS 5D Mark III?
And what version of Adobe software are you referring to?
There definitely is support for the EOS 1D Mark III in in versions of the Creative Suite dating back several versions. Support for the EOS 5D Mark III was made available in an update to Creative Suite 6 and Lightroom 4.x.
- Dov

Will PSE 13 open CR2 Files from my Canon 7D?

Similar Messages

Maybe you are looking for