Will RH7 run on Win 7 64-Bit? Thoughts on Newer Versions?

We just got new computers at work and I'm in the process of moving data and reinstalling software. Will RH7 run on my new computer? It's a Win 7 64-bit machine. Or is this a good excuse to upgrade?
Also, what are pros and cons of moving to something later than RH7? I've not had time to play around with anything new, and don't even know what the latest RH version is out there.
Thanks in advance,
Jared

Hi Jared
So I have RoboHelp X5, 6 and 7 running in my VM in case I need access to those versions. I installed RoboHelp 8 directly in Windows 7 64 bit and it seems to work just fine for me. Admittedly I do see an occasional crash or where it goes belly up with a not responding, but then again that's happened to me for so long that it's just part of using RoboHelp. Long ago I accepted the fact it's simply software just like any other software and as such has flaws.
I understand that RoboHelp 8 on Windows 7 64 bit is likely to work but is not officially blessed by Adobe as them claiming it should work without issue.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Similar Messages

Support for 3.6 is going away. 10.x will not run properlty on RHEL5 because FF10 needs a newer version of the nss package. We have no choice but to use RHEL5.

As soon as you hit something that uses Flash (such as youtube) the browser locks up, and the following messages get output:
/usr/local/firefox/10.0.2/plugin-container: /usr/lib/libnss3.so: version `NSS_3.12.10' not found (required by /usr/local/firefox/10.0.2/libxul.so)
/usr/local/firefox/10.0.2/plugin-container: /usr/lib/libnss3.so: version `NSS_3.12.9' not found (required by /usr/local/firefox/10.0.2/libxul.so)
/usr/local/firefox/10.0.2/plugin-container: /usr/lib/libnss3.so: version `NSS_3.12.10' not found (required by /usr/local/firefox/10.0.2/libxul.so)
/usr/local/firefox/10.0.2/plugin-container: /usr/lib/libnss3.so: version `NSS_3.12.9' not found (required by /usr/local/firefox/10.0.2/libxul.so)
/usr/local/firefox/10.0.2/plugin-container: /usr/lib/libnss3.so: version `NSS_3.12.10' not found (required by /usr/local/firefox/10.0.2/libxul.so)
/usr/local/firefox/10.0.2/plugin-container: /usr/lib/libnss3.so: version `NSS_3.12.9' not found (required by /usr/local/firefox/10.0.2/libxul.so)
The EDA industry pretty much runs on Redhat Enterprise Linux 5 because the tools (which are very complex) take time to port and verify on a new OS. We have hundreds of engineers on RHEL5, and we have no idea when we will be able to move to RHEL6. Can you please either build with libraries supported by RHEL5 or provide a statically linked version of the newer FF?
We're stuck at 3.6.x until this happens (or some interim version supports EL5, but I don't have time to go try every version after 3.6).
We actually use CentOS5, but it's binary compatible with EL5.
Thanks.

I will not pretend to know any answers to your problems, but I do wonder if you realise Firefox did decide to produce and support an Extended Stability Release, unfortunately this is NOT going to be based on Firefox 3.6. but on Firefox 10.
For those directly concerned with this see https://wiki.mozilla.org/Enterprise#How_to_Participate_and_Post

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
the differences between os operations & dlls loaded but am unable to find the OS issue.
Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?

You must provide the exact name and version of the software for anyone to attempt to answer your question. Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

I am getting run time error 6034 after updating iTunes to new version.Any help?

I am getting run time error 6034 after updating iTunes to new version.Any help?
I tried different ways to resolve it like uninstall/install itunes
I am also getting error message on iTunes helper.exe

Hi isush!
I have an article for you that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I reloaded iWork 08 on my iMac after a crash. All documents created on this ap now will not read. Error message says I need a newer version to read the document.

After a crash on my iMac, I reloaded iWork 08 from my disk. All the documents I created in this ap will no longer open. Message says I need a newer version of Pages to open this document. I can find nothing on this problem in apple support.

It sounds as you have had iWork09 on your computer. Check that you don't have a iWork09 CD.

App's will not install on my itouch because it requires a newer version of ipod software. even when itunes says it has the latest software.

app's will not install on my itouch because it requires a newer version of ipod software. even when itunes says it has the latest version of software.

How old is your iPod. You may be out of luck if it's too old for a current IOS...

My ipad air will not allow me to access since I downloaded the new version 8.3 operating software

My ipad air will not allow me to access since I downloaded the new version 8.3 operating software

When I try to open the slide to upgrade screen comes up and then the request for passcode and then the apple loading screen then Hello then update completed screen I select continue another apple with line showing progress then asking for password enter then Message and Face time a screen
then a get started screen and then another apple with line showing progress and then my opening screen shows for a split second and then back to the apple with progress for a split second and then it shuts down.

BB Desktop Software 6.1 will not run on Windows 7 64-Bit

I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is. A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
Thank you all so much in advance once again! (Below is my original plea for help.)
P
Hi.
I have read in these forums and am still lost. I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
I try to be a good lil girl and follow forum rules, but am lost here.
I bought a new laptop, a Dell 17R It runs Win 7 I think. Lots of ROM/RAM. I dowloaded the desktop program from bb dot com and cannot get it to work. First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
It then acknowledged my Torch and dld my photos. Then it decided I didn't have space and undid whatever it did.
NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
I need someone who understands this gobbltygook to explain to me what to do. I need to unload my photos, as I use my phone to take pix more than I would have thought.
I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them. (It took my YEARS to spring for this laptop)
Thank you in advance for your patience.
P

I have the same issue. It gets to a desktop manager picture and just freezes.

CS4 32 bit will not open under Win 7 64 bit.

Upgraded from Win 32 bit XP to Win 7 64 bit. While in the process of rebuilding my system downloaded and installed Beta versions of CS6 and Bridge for CS6, before trying to install my current CS4 version. I do not know whether this is causing any of the following problems that I am experiencing.　　　　　　　　A short time later I installed CS4, ending up with both the 32 and 64 bit versions of CS4. Interestingly, this install did not install a CS4 version of Bridge in either 32 bit or 64 bit, possibly because the Beta CS6 version of Bridge was installed? 　　　　　
However, from a previous system backup I was able to retrieve a copy of the CS4 version (presumably 32 bit version) of Bridge, which I simply copied to the new system and found that it works fine. Interestingly now the CS6 version of Bridge loads one of the two CS4 versions and not the Beta CS6, but I cannot tell which one of the CS4 versions. Question: how does one determine whether the loaded version is the 32 or 64 bit version? If I click on System Info it does say X64 which I assume means the 64 bit version is loaded. Is this the way to tell?　　　　　　　　
The CS4 version of Bridge now apparently defaults to the 64 bit version of CS4 on opens.　　　　　
I have now read that most if not all my previous plugins will not run under CS4 64 bit, so I really need to be able to run CS4 32 bit. Unfortunately, when I try to open CS4-32, it fails with the following msgs: "Adobe Photoshop CS4 Has Stopped Working." Then,　　　　　
"Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d3882e
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
Exception Code: c0000005
Exception Offset: 0002880f
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt"　　　　　　　　
The CS4-64 version continues to run as it should.
Assuming that CS6 will come with a 32 bit version when it hits the market I will be upgrading, but for now I really need a working 32 bit version of CS4.
Please help.

Help - System Info will tell you whether you're running the 64 bit or 32 bit version (look at the end of the first line). EDIT: Note that originally said Help - About and have corrected this.
Yes, Photoshop CS6 provides both a 32 and 64 bit version. In fact, it should have installed both on your system.
Normally the two versions don't get into eachothers' hair, EXCEPT for file associations, which may explain the mixup you're having where Bridge runs the last version installed. I doubt it has to do with your crash though.
Have you copied any plug-ins or set an Extra plug-ins folder so that there could be a mixup between the two versions?
Have you checked to see if your display driver has been updated? Go to the web site of the maker of your video card and download the version that matches your hardware and OS. Display driver updates solve many problems.
-Noel

ITunes will not upgrade on Win 7 64 Bit

Hi,
I have Win 7 Home Premium 64-Bit.
I am trying to upgrade from iTunes 10.1.0.54 to the current version.
When I try to use Apple Software Update, it downloads but I get an install error and it tells me to try and download it separately.
When I downloaded iTunes from the Apple web site, the error I get was that the Windows Installer Service could not be accessed. I downloaded the 64-bit version of iTunes.
What can I do to fix this?
Thanks!

but then I got a problem: the installation said I had a newer version of QuickTime then the one the iTunes.exe came with
It's okay ... we're still making progress. With these ones there's also (relatively) commonly additional trouble with the QuickTime.msi and associated installation configuration information that can produce that new error message. So there's a way forward, but there's a bit of awkwardness involved in getting the tools for the job.
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Quicktime entries and click "Remove".
Quit out of CleanUp, restart the PC and try reinstalling iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

ITunes 10 will not run on Windows 7, 64 bit

I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?

I AM RUNNING FIREFOX 3.6.21, HAVE DOWNLOADED THE NEWER VERSION BUT WHAT DO i DO NEXT, DO i HAVE TO UNINSTALL THE OLD ONE FIRST?

What is the procedure to get the newer Firefox version up an running. I need to know if I can just install the new version over the old one or is it more complicated. And once the new version is installed, is it necessary to reboot my computer before I can use it?

You're welcome

How can I download the old version of ibooks that will operate with 5.1? I cannot download the new version in order to get a compatable one!!

have read the 'help' given for this question from another ipad owner --which was to download the current version and then might be able to get a compatable version --- but the new version will not download -- just tells me I have to upgrade to version 6 which is not possible on the 1st generation ipad! I cannot understand why the older versions of ibooks and Kindle are not avilable for those of us who cannot afford to buy the new ipads. Please can anyone help?!!!!

Sorry, but you can't.
 Cheers, Tom

I have downloaded Firefox 5.0 at least three times and saved file, but I don't know how to install and run. It keeps asking me to download new version and Save file. I'm in a never ending loop, it keeps downloading same exe & does not install Please Help

Please tell me how to install and run new Firefox 5.00 after I have downloaded the new version and chosen Save File. I just go into Loop and screen says new version available and download again !

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Quicktime will not install because of it thinks there is a newer version already installed.

I don't even have QuickTime installed and it is telling me it cannot install because of a newer version already installed. I have searched completely and found nothing. I have Windows XP and am trying to install the latest version of QuickTime.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

Will RH7 run on Win 7 64-Bit? Thoughts on Newer Versions?

Similar Messages

Maybe you are looking for