Will SB PCI 128 Support CDRW and DVDRW Earphone Listeni

Hey Gang,
I was able to listen to my headphones privately on my CDROM. The jack was located on the front of the device just below the cdrom turntable.
My soundcard has been my SB PCI 28. My problem is that since I got rid of the old cdrom and upgraded to a DVDRW and a CDRW I haven't been able to listen to my headphones/earphones anymore.
Does my SB PCI 28 earphone support earphone/headphone listening on a DVDRW or CDRW, or is is STRICTLY FOR CDROM's?
Do I have to download new drivers, reset a jumper or get a new card?
I've tried pluggin the audio cord from the cd/dvd to each one of the three rectangular input jacks on the sb pci 28 and no joy.
Thanks,
HULK

Make sure you disable Digital Playback for the DVD-ROM.....in device manager and the software you are using for example WMP.....

Similar Messages

  • Will the iphone 5s support talk and data simultaneously?

    Will the iphone 5s support talk and data simultaneously?  Didn't hear anything about it so just want to confirm.

    musaabo wrote:
    Will the iphone 5s support talk and data simultaneously?  Didn't hear anything about it so just want to confirm.
    No.
    (I'd put the link up but I think Verizon would delete/edit my post).
    From a New York Time's piece, "It was Apples decision to design the iPhone 5 so that customers could only make voice calls and do Internet activity simultaneously only over Wi-Fi, not over Verizon cell network."
    The reason why...
    "The explanation for this, it turns out, is complicated. The technology  in 4G LTE networks does not currently handle voice transmissions; it  only does data. So when you place a phone call on a 4G LTE smartphone,  it’s actually rolling back to the carrier’s older second- or  third-generation network, according to AnandTech, a Web publication that  does deep analysis on hardware."

  • How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

    How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

    Cross your fingers and hope.
    Obviously if there is any big or known threat Apple will send out a firmware fix.
    But the TC is designed to be end user simple device. It has no firewall that is visible at any rate. I don't know that it truly doesn't have a firewall but it is not part of the end user controls.
    IMO if you have major security concerns that go beyond end device firewall, which is where Apple do put most of the security, since firewall in the router is plainly not a stop to anybody deliberately downloading an infected file or website, and most end users.. do not want a firewall that prevents them using the web like a business does, where only certain ports are allowed. Everything else tough luck.. you are not allowed to use it. Then TC is unsuitable for you anyway.. buy a proper firewall appliance.

  • Will Scene Builder 2 support SwingNode and JFXPanel?

    We have a large swing app that we're migrating to JavaFX over time. I want to use FXML and SceneBuilder for all new UI design and am wondering if SB 2.0 will support SwingNode and JFXPanel? If so, what level of support? Will I be able to set all the properties/handles in the SwingNode and JFXPanel but nothing inside the embedded node from the other UI type? This is all that I was hoping for.
    We're going be mixing Swing and FX longer term so we'd need this support (along with the custom control support in SB 2.0) to effectively use it.
    Thanks,
    -Darryl

    Sorry for the late reply, Darryl.
    Yes, SB2 will support SwingNode.
    You will be able to drop a SwingNode in any container that accepts a Node:
    - In the Content panel, you will be able to select and move the SwingNode.
    You will not be able to resize it (because a SwingNode has no sizing properties).
    - In the Hierarchy, SwingNode will be a leaf node (SB won't allow you to build
      a Swing UI inside your SwingNode)
    - In the Inspector, SwingNode will be inspectable like any other Node  :
      however SwingNode.content property will not be exposed ; this property will
      have to be manipulated programmatically by your application.
    Eric

  • ABAP and Java Stack: Which to choose/supported standards and components?

    Hello,
    I am trying to understand the role of the two stacks in NW. Maybe anyone has a few
    hints where I can find answers to the following questions:
    - An overview of supported Standards (Java 5 since when?)
    - An overview of which component runs on which stack? Portal->Java, Integration Server->ABAP and so on.
    - Guidelines when to install both stacks and when to use just one stack? When do I use which one?
    - Has SAP an stategy towards an one Stack solution (possibly Java?)
    Best regards and thanks for any pointers!
    Stefan

    An overview of supported Standards (Java 5 since when?)
    Go to service.sap.com/pam
    Product Availability Matrix will tell you about supported version and platforms.
    An overview of which component runs on which stack? Portal->Java, Integration Server->ABAP and so on.
    Usually the question goes the other direction: what stacks we need for implementation of a particular function?
    More and more products require ABAP backend and Java frontend.
    For example Employee Self Service has been transerred from ABAP only ITS based to ABAP backend and Java frontend.
    Same with SRM.
    Guidelines when to install both stacks and when to use just one stack? When do I use which one?
    Same as above, driven by business requirements, not technology.
    Has SAP an stategy towards an one Stack solution (possibly Java?)
    No. Core business functions are still being developed on ABAP and interface, GUI etc utilize JAVA.
    Regards,
    Slava

  • Will NI PXI chassis support NI PCI card?

    Will NI PXI chassis support NI PCI card? If not means WHY???

    National Instruments PXI chassis and cards are keyed for 5V operation, and there are not any current plans to migrate to a 3.3V setup. We currently do not have a solution for using a 3.3V-only card in one of our chassis.
    Ryan Tamblin
    Applications Engineer
    National Instruments

  • [nForce] K7N2 board and Soundblaster PCI 128 soundcard

    I am running w2k with all uptodate service packs. I have an MSI K7N2 motherboard with uptodate drivers (downloaded today!) and having problems with a Creative PCI 128 soundcard. The gameport controller will not work as in Device Manager it says it can't find enough resources. I have swapped PCI slots, removed all other PCI devices and tried to change the resource configuration in Device Manger but was unsuccessful. I can't see any other devices conflicting with the soundcard and nothing shows in System Information as using the same resource as the soundcard. Anyone any ideas?
    Thanks
    Tony

    Sorry for not giving good news, but your'e wellcome !

  • Will my iTunes account support two iPads, and will the apps that I paid for on one iPad be free on the second iPad.

    Will my iTunes account support two iPads, and will the apps I buy for one iPad be free for the other iPad.

    Yes yes and yes.
    My girlfriend and I use the same AppleID for purchases, and any apps that she purchases I am able to then purchase without additional charges.
    EE

  • HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

    I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

    Start here... http://www.apple.com/support/iphone/assistant/itunes/

  • When Pages will support portrait and landscape page orientation in the same document?

    When Pages will finnaly support portrait and landscape page orientation in the same document?

    Only Apple would know, and it isn't telling.
    Peter

  • I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
    I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

  • Will Apple support facetime and imessage in Ipod though 5.1.1 ?

    Will Apple support facetime and imessage in Ipod though 5.1.1 ?

    The Apple Messages app cones with iOS 5 and later. That means a 3G and later iPod has Messages.
    Facetime requires a front camera. That only the 4G and later iPod has FaceTime

  • When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

    Hi all
    I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
    I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
    Thanks!

    Oracle does not announce release dates and neither
    does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
    Niall Litchfield
    http://www.orawin.info/

  • When will new version 4.0.1 support Norton? Everytime new version is issued, it never supports Norton and we're never notified when it does!!

    Everyone has some version of spyware, malware, anti spam protection....mine is Norton 360. Every time new version of Firefox comes out, we're told it doesn't support Norton and we're never notified when this will be rectified. Why is this?

    Credit Tony E
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years.  Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything.  Is this really true?

    I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years.  Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything.  Is this really true? 
    Apple has to be more user friendly than to let something like this happen, right?

    Did you change the ID, or did you create a new Apple ID? If you had simply changed the ID then what I suggested above should work as the ID itself is the same (even though the name of the ID - the address - has changed).
    However if you created a new ID, logged in with that, and purchased items on it, then you have two separate IDs each with purchased associated with them. You say that you can't log in to the original account with the 'alternate' email - have you tried logging in with the original email address? It doesn't matter if it doesn't actually work to receive mail, as far as logging in is concerned it's just a text string.

Maybe you are looking for