Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

Hi. Sorry if the answer is obvious, but I need to ask...
Will SCOM 2012 R2 coexist with SCCM 2012 SP1?
We currently have SCOM 2007 R2 installed and we'd like to upgrade.
We installed SCCM 2012 close to 2 years ago and upgraded to SP1 last summer.
We had SCOM 2007 R2 integrated with SCVMM 2008 R2, but have upgraded to SCVMM 2012 SP1 recently - so there is nothing setup between SCOM and SCVMM.
There is currently nothing setup between SCOM and SCCM.
We're a single forest, single domain shop. Ideally, we'd like or System Center products to "work together", thus the question about the 2012 SP1 and R2 mix.
Thanks for any input. I appreciate your time and expertize. Joe.

Hi,
I concur with Alexey, a side note SCCM and SCOM do not use the same SQL Server.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Question about XPe, will this version of embedded work with SCCM 2012 R2

I was hoping someone has deployed XPe using 2012 R2 OSD. We have a image that is created by a vendor, they build our POS systems using ghosting (.gho) I have now been tasked to build a imaging process using their image and deploy using SCCM. Reading through
various blogs and looking at this a bit myself it doesnt look fun using any version prior to WES 2009. Does anyone have any ideas for me to get started. I havent worked with XPe....
Thank you

1. Create a task sequence which installs and captures an image of a standard WES client
2. Deploy the captured image using a task sequence which also configures it and installs additional software
3. Enable the write filter (FBWF in our case) after installation and configuration completes
Anyway, some SCCM steps should not be supported in WES, you need to test first.
Juke Chou
TechNet Community Support

Remote WSUS integration with SCCM 2012

Hi,
We are currently having WSUS already in place for Patching , but not used at all its just installed.
can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
or I decommission it and install a new WSUS on same server as SCCM server.
what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
Thanks in Advance

When you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
A couple of notes here though:
- You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
- Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
Jason | http://blog.configmgrftw.com | @jasonsandys

Deploying CC Enterprise Applications With SCCM 2012

Hi all,
We are using CC Packager to package up individual applications (Photoshop, InDesign etc) and are having trouble deploying the applications once packaged. To deploy, we are using SCCM 2012 and are deploying to Windows 7 x64 clients. It appears that the install begins on the client, then hangs, never to finish.
We are running the MSI with the REBOOT=ReallySuppress and MSIRESTARTMANAGERCONTROL=Disable commands, but with no luck.
This has us really stumped. The applications seem to package fine, yet just won't install. If we manually run the installer, we can see it begin installing, then the progress bar goes backwards and the installation ends without displaying any sort of message.
Also, as an FYI, we have followed this guide closely in our attempts: http://helpx.adobe.com/creative-cloud/packager/deploying-packages-sccm.html
Has anyone experienced a similar problem? Any ideas?
Thank you in advance.
Ryan

Windows 7 x64 Clients
Deploying with SCCM 2012
I have called Adobe before and was told that the application package needs to be on a local drive on the computer. The package cannot be installed if the package is sitting on the network. My installation for a adobe creative cloud package fails to install when I try to install the application from the software center. At some moment the installation searches to ensure it is on a local disk. Not sure how this happends. If you place the installation package on a drive on your computer the package will install, although it will take time depending on how many applications you have packaged.
Another problem that you might have is having users log out of the applications without admin previlages.
I have yet to find a solution for these two problems, I could really use some help from someone who has sucessfully deployed a creative cloud package to a user.
Thank you

I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens.

Hi,
I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens. The reason you dont need to repackage\test the application on an client OS...
I don't agree and I have not Heard this Before, just that you use TS for some scenario.
Or is it more likely that "Terminal Services(RDS)", take over the applikation administration?
/SaiTech

Surely this all depends on your environment. There's nothing wrong with creating RemoteApps to push to client devices. Maybe you have an environment where RDS is widely used.
Why not leverage both solutions and target App-V's at RDS servers and then create App-V based RemoteApps that users can run at home as part of a home working solution via RDWeb.
Creating apps via RDS will be an admin overhead yes but then so is creating App-V packages in SCCM.
I don't agree with the arguement re: 'you dont need to repackage\test the application on an client OS...' as
App-V allows you to run on multple O/S types.
To be honest both technologies have their pros and cons.
Cheers
Paul | sccmentor.wordpress.com

How to manage Forefront Endpoint Prorection Security Client 2010 with SCCM 2012

Hi
I've sucessfully installed System Center Configuration Manager 2012
and now I 'd like to push/deploy Forefront Endpoint Protection Client 2010 on client machines.I also know that Microsoft embedded Forefront Endpoint Protection in SCCM 2012 so that you can manage FEP from single SCCM 2012 console.Now
when I try to push FEP client on client machines using Default Client Settings
then I've found that all Endpoint Protection settings are greyed out !
Do I need to install Forefront Endpoint Protection 2010 or 2012 Server (which is beta) with SCCM 2012, in order to deploy FEP client or is there a workaround or solution to resolve this ?
Thanks
Sohail

Hi,
Endpoint Protection 2012 is builtin in SCCM 2012, you simply add the Site Role called Endpoint Protection either on your CAS if you have one of those or on your Primary site Server. FEP is no longer a standalone installer and it is a released product and
no longer Beta.
Then the Endpoint Protection Client Settings will no longer be greyed out and you can deploy the System Center 2012 Endpoint Protection client.
http://technet.microsoft.com/en-us/library/hh508760.aspx
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Deploymen fix with sccm 2012 R2

Hello Guys
I need deployment a patch in 235 windows 7 x86 and x64. I was created the package and also create a .bat file with the following contents
wusa.exe <fix.msu> /quit /norestart
The package is distributed but when is running appears a windows with the parameters of wusa
Who I can distributed this patch with SCCM 2012.
Thanks for your help
Regards

Hello
I running .bat file with the parameters
wusa.exe <fix.msu> /quit /norestart
In the station of user appears a messages with options of parameters wusa.
Exist other method?
Regards

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

AMT 3.2.10 Clients with SCCM 2012 on Windows 2012

Hey
I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x upwards)
is successful, so I can rule out all the usual suspects like the provisioning certificate from GoDaddy, our internal CA, DHCP options, etc. Provisioning with SCCM 2007 of both 3.2.x and 5.x AMT devices is also still successful.
The amtopmgr.log repeatedly shows the following entries:
Provision target is indicated with SMS resource id. (MachineId = 16777325 WS45.mydomain.ch)
Found valid basic machine property for machine id = 16777325.
Warning: Currently we don't support mutual auth. Change to TLS server auth mode.
The provision mode for device WS45.mydomain.ch is 1.
The IP addresses of the host WS45.mydomain.ch are x.x.x.x.
Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4.
Attempting to establish connection with target device using SOAP.
Create provisionHelper with (Hash: 74B7792EDBD64EBB01E2E3A0B27FAFA04C2D3BCB)
Set credential on provisionHelper...
Try to use provisioning account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioning account #0.
Try to use default factory account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using default factory account.
Try to use provisioned account (random generated password) to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioned account (random generated password).
Error: Device internal error. This may be caused by: 1. blabla...
Error: Can NOT establish connection with target device. (MachineId = 16777325)
After some investigation with Wireshark, I've found out that SCCM tries connect with TLSv1 to the AMT device. The response from the device is immediately an SSL alert (internal error). Using OpenSSL, I could connect to the device if I explicitly told it
to use SSLv3. This leads me to believe that the 3.2.x firmware cannot handle TLSv1 correctly and SCCM never tries to connect with SSLv3 after a failure.
So the question is: How can I get SCCM 2012 to provision these devices?
Regards,
Ingo
[1]
http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigOOB

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Airwatch MDM integration with sccm 2012

I want to integrate Airwatch MDM with SCCM 2012 SP1. I am not able to find out any documentation for the same. Can anybody help me with the said.
Thanks and Regards Deepak

There is an integration between AirWatch and ConfigMgr 2012. I've never used it so I can't comment on it.
https://tool.microsoftsca.com/Partner/?id=737
Watch the video here
http://airwatch.wistia.com/medias/7463a8aae8
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to prompt for OU during OSD Task with SCCM 2012 R2?

How to prompt for OU during OSD Task with SCCM 2012 R2?

Hi,
Here is an example on how to do it using a Variable prompt in Configuration Manager, It works the same way in SCCM 2007,
http://www.the-d-spot.org/wordpress/2013/04/01/dynamically-join-computer-to-ad-ou-during-osd-with-sccm/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Windows Intune with SCCM 2012 R2.

Windows Intune with SCCM 2012 R2.
I am able to download Certificate Signing Request (CSR).
When I submit CSR file to Apple Push Certificates Portal I get following prompt:
Do you want to open or save create02fe592d.json (132 bytes) from identity.apple.com?
I am unable to get the APN Certificate.

That is a known issue with Internet Explorer and the Apple Website. If you just go back to the main page where all your certificate are located you can download it from there.
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

WSUS on Server 2012 Standard R2 with SCCM 2012 Standard R2 Proper Setup

What is the proper setup (best practice) on setting up WSUS using Server 2012 Standard R2 to work properly with SCCM 2012 R2 Standard using Server 2012 Standard R2 on separate box?
1. Is it using WID or database during the setup of WSUS using Server 2012 Standard R2?
2. Once it setup properly on WSUS using Server 2012 Standard R2 either WID or database (using SQL 2012 Standard SP1), how do I connect with SCCM 2012 R2 Standard using Server 2012 Standard R2 on separate box?
3. On SCCM 2012 R2 Standard using Server 2012 Standard R2 just need to add WSUS Role, right? Is it using WID or database?
Thanks,
Reza

1. Generally, using the SQL instance you use for ConfigMgr is preferred.
2. The Software Update Point connects ConfigMgr to a WSUS instance.
3. See 2.
Jason | http://blog.configmgrftw.com
It's just as Jason said. The SUP role in SCCM basically "sits on top" of the WSUS role, whether it is local or remote is up to you. You basically install WSUS on a server like you normally would WITHOUT configuring it. I have used both WID and SQL. It's
always nicer to put it on your SQL server since that is (should be) backed up regularly and maintained.
Once you have WSUS installed you just point SCCMs SUP role at the installation and it takes over the rest.
Dustin Estes - MCP | www.dustinestes.com

Remote control options with SCCM 2012 PKI

Does anyone have the remote control feature working with SCCM 2012 R2 running in HTTPS mode? My last message on the console upon trying to start a remote connection is "Initializing a security handshake...". Firewall has been temporarily
disabled on the client. Client certificate is PKI and connection type is 'Always Internet'.
Thanks

PKI, certs, and HTTPS client communication have nothing to do with Remote Control; Remote Control is peer to peer over a custom port (2702 I think but could be wrong). Because it is peer to peer though, you cannot use Remote Control to clients on the Internet
or where direct traffic on this port cannot pass.
Jason | http://blog.configmgrftw.com

Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

Similar Messages

Maybe you are looking for