Will script written in 2012 SP1 be able to run in version 11.1?

I am writing a script in 2012, but I just found out that one of my end users is only on version 11.1.
Will they be able to successfully run the script or are there too many differences between versions?
thanks.

Hi 2Pale4TX,
There's a good chance it will run in 11.1, and if you're motivated you can always adapt it to run even if it doesn't at first.  The issue is mainly that there are new commands that have released between 11.1 and 2012 that 11.1 can't use.  Attached are documents that list the new features for those versions.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
New Features in DIAdem 2010.doc ‏44 KB
New Features in DIAdem 2011.doc ‏41 KB
New Features in DIAdem 2012.doc ‏40 KB

Similar Messages

  • Will my early 2008 MacBook Pro be able to run OS X Yosemite?

    Will my early 2008 MacBook Pro be able to run OS X Yosemite?

    I have the same Macbook Pro as you. You should read this Apple page: http://www.apple.com/osx/how-to-upgrade/?cid=wwa-us-kwg-mac-com   While you can install Yosmite, many cool features will not work on pre-2012 models, including: Handoff and Instant Hotspot, AirDrop, AirPlay Mirroring, Peer-to-Peer AirPlay and Power Nap. Additionally, if you have not already upgraded your iPhoto library from iPhoto 8.1.2 (as I have not), I believe you will need to purchase the upgrade after you install Yosemite based on what I read here:  https://discussions.apple.com/thread/6602872 . Good luck!  If you do or have proceeded with updating to Yosemite, please come back to this thread and share how the experience went. Thanks.

  • SCCM 2012 SP1 Update to CU5 not showing version 1600 for clients updated !

    Recently upgraded SCCM 2012 SP1 and its showing a version of 5.0.7804.1600 as it should be. Pushed out the CU 5 client manager update to few machines and they are also showing .1600 as the version, however in SCCM 2012 manager itself it is not updating the
    status of those machines from say .1000 or .1400 to .1600. Why is this happening and any solution for it ? I have also updated the CM on the server hosting the SCCM and is current to .1600 version.

    Because the client agent version is returned from clients via heartbeat discovery which only occurs by default every 7 days. Thus, you need to be patient. Note that I generally recommend reducing the heartbeat cycle to at least once a day partly for
    this reason.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Will my iMac 2007, 1GB RAMM be able to run OS X Lion?

    Hi just wondering if i need to upgrade my RAMM to be able to run Lion on my mid 2007 20inch iMac, i've got a 2011 Macbook pro which will easily run it i know, but was just wondering if my iMac will be all right.

    It will not install unless it detects at least 2 GBs of RAM is present. Just upgrade your RAM. Your machine can accommodate up to 6 GBs using 2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs.
    Look for suitable RAM at DataMem or OWC.

  • Not able to run Software Version report

    Last week, I ran a Software Version report for Microsoft Office, in order to remove older versions and prepare for the latest updates.
    After getting the report, I went back in and ran the following Unix script:
    rm -r '/applications/microsoft office x'
    as root to remove the directory.
    Now I am not able to run a Software Version report on Microsoft Word. I am able to run a report on any other application, including PowerPoint.
    When I attempt to run a version report on Word, it hangs up on one computer collecting report data. I have removed that computer from the list, but it still hangs. Eventually, all the computers are taken offline in ARD, and I have to restart ARD to restore the connections.
    I have restarted one of the computers, but still cannot run the report on Word.
    Administration computer:
    ARD 2.2 (7C31)
    15" 1 GHz PowerBook G4
    Mac OS X 10.4.6
    512 MB RAM
    Any suggestions?

    When all the clients go offline like that, it generally indicates that the ARDAgent.app on the admin machine has crashed. Did you get any crash logs in /Library/Logs/CrashReporter?
    Your statement "I ran the following Unix script: rm -r '/applications/microsoft office x'" is a bit unclear. You did a send UNIX command to the clients? I'd be surprised if that actually worked because the file system is case sensitive. In order for that to do what you wanted, it would have needed to read rm -r '/Applications/Microsoft Office X'. But regardless of whether or not it worked, it should not have affected your ability to run the report.
    Did you re-run the report with the "Generate new data" checkbox (I think that's what it reads) set?

  • Issue with SCCM 2012 SP1 U5 upgrade and client published version

    Recently we upgraded our SCCM server to SP1 U5, and our published and available client version is still at 5.00.7804.1000 instead of 5.00.7804.1600. We ran the hotfix to upgrade it and it looked like everything had went through. Does this not also
    upgrade the client? It doesn't seem like you can run the hotfix again after you've already installed it once to repair either. Is there another way to update the published version inside the console? We have it as a package right now to deploy to all the systems
    but I was hoping we could upgrade the internal one and let it run more automatically. Any advice would be greatly appreciated.

    More info:
    How to update ConfigMgr clients automatically… in SP1
    http://configmgrblog.com/2012/12/03/how-to-update-configmgr-clients-automatically-in-sp1/
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I have perl scripts that I want to be able to run with my iplanet web server 6.0. How can I make it work in Windows NT? (Because I have no problem when I use it with Linux).

     

    Hi Melanie,
    In order to run a PERL script under Windows NT the iPlanet Web Server needs to know where to find the PERL interpreter.
    follow these steps :
    1) Make sure Windows NT knows what a .pl file is. In file Manager click on file and choose associate from the menu. Check the "files with extension" drop-down list for pl - if it exists verify that it is pathed to your perl.exe. If it is not already on the list click the "New Type" button. In the Filetype box put pl. Choose open from the Action drop-down list. In the Command box specify the full path to your perl.exe interpreter (Make sure to use short filenames, rather than long filenames.) Click the OK button. Then click the Close button in the main Associate dialog box. Double click a .pl file to test - it should automatically launch the PERL interpreter and feed it your .pl file.
    2) Create a directory to contain your .pl scripts.
    ~server_root\shell-cgi is a good choice.
    or \cgi-bin\
    NOTE: Make very sure that this directory is NOT part of the document root, it should have it's own directory (preferably at the same level of the docroot).
    3) In the Admin Server select Programs.
    4) Choose CGI directory (normally) or WinCGI directory or ShellCGI Directory depending on ur choice from the Programs menu.
    5) Put the URL Prefix you would like to map to your Shell-CGI directory into the URL Prefix field.
    6) Put the full path to your Shell-CGI directory in the Shell CGI directory field.
    7) Click OK.
    8) The save and apply changes page will display your changes and give you the opportunity to verify them. If they are correct click the Save and Apply button. If not Click the Undo button and go back to step 4.
    (9)You can then call your .pl scripts directly by referencing the directory mapping that you have just created. For example:
    http://my.server.whatever/shell-cgi/ myscript.pl
    this should work now.
    If not Pls Mail me.
    regards
    T.Raghulan
    [email protected]

  • Will my macbook pro (Mid-2009)  be able to run Diablo III smoothly without any lag on the lowest quality??

    Mac OS X Lion 10.7.4
    2.26 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    Thanks.

    It should run in your iMac properly

  • Will my HP envy 15 x360 be able to run games like skyrim or Arma 3?

    Games like:
    Skyrim
    Arma 3
    GTA V
    DayZ
    Etc.

    Hi,
    Good luck and Happy New Year
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

    Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
    Single server, local SQL install, SQL Server 2012 SP1
    Hyper-V VM running on Server 2012.  VM has 8GB Ram, single vCPU
    Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
    See screenshot
    http://i.imgur.com/l0Molh1.png
    I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue.  I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
    Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
    The SCOM Console launches and responds fine, and I get no other errors.  I check the Data Access service and it is online.  I have left the system alone for a couple of hours and no other errors.  I then closed those alerts and restarted the
    server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
    Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
    Has anyone else come across this before?

    Please try the method in the following thread:
    Note: As there is operations related to Registry, please perform a backup before doing this.
    OpsMgr 2012 - Power Shell Script failed to run 
    http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
    Thanks.
    Nicholas Li
    TechNet Community Support

  • SCCM 2012 SP1 SQL License Question!!

    I have SCCM 2012 SP1 running on one server with the DB running on another server within SQL 2012 SP1. This was running grand for 5+ months green across the board.
    Recently I lost SCCM access. I have discovered this is due to the trial of SQL having expired! I have performed quite a bit of research and see that SQL use is granted with the purchase of SCCM 2012 license. i.e. no SQL license is need.
    My questions:
    Why has my trial expired if SQL is supposedly free with SCCM 2012 license?
    Do I need to upgrade to full version and use SCCM license to activate SQL?
    Possible cause:
    I have two instances running on my SQL server: SCCM DB and WSUS DB, is the expirey because of the WSUS DB and will I need to either remove this WSUS DB and, or, use a SQL 2012 license up?
    Quick responses appreciated Thanks!
    MichaelSpaulding

    Hi,
    There is no license key provided for SQL server with the SQL User Rights that is included in the System Center license. So you need to get the SQL server keys/media from volume licensing site. There is no relation between the WSUS DB and the fact that the
    SQL trial version has expired.
    If you downloaded the SQL Standard media from Volume licensing here is a guide for upgrading SQL server
    http://www.mssqlgirl.com/upgrading-from-sql-server-2012-evaluation-edition.html
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCOM 2012 SP1 RTM - SP1 UR8 or R2 UR4 ?

    Hi,
    I need to determine whether we will upgrade existing SCOM 2012 SP1 RTM to SP1 UR8 or R2 UR4?
    I suppose going to R2 UR4 would require several hops, i.e SP1 RTM -> SP1 UR8 -> R2 RTM -> R2 UR4.
    I have three environments (dev, preprod and prod) to upgrade.
    Each environment has distributed architecture (2 MS, 1 gateway, 1 web console server, 1 operations console server (TS) and up to 100 agents.
    I am also looking to implement GSM for website monitoring, but I don't think that is a factor in the decision.
    I am hesitant to take on the additional work of going to R2 as I doubt we'll use any of the new features.
    A deciding factor is end of product support: http://support2.microsoft.com/lifecycle/search/default.aspx?sort=PN&alpha=operations+manager&Filter=FilterNO
    So is it accurate to say 2012 SP1 mainstream support end date is 12 months after a 2012 SP2 release date IF SP2 is released, and if no SP2 is released, 7/11/2017?
    Comments much appreciated, thanks.
    Jason

    it's easy to upgrade from SP1, why not to upgrade even if you don't use any of the new features yet
    some additional inf.
    http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
    http://www.bictt.com/blogs/bictt.php/2014/10/02/scom-2012-sp1-to-r2

  • MMC crashes when attempting modification of a protection group in DPM 2012 SP1 RU3

    Hi All,
    I've got a problem with my DPM 2012 SP1 server for a few weeks now. It's backing up and restoring fine, but when I attempt to modify any protection group, the MMC crashes. This happens even before the modify protection group dialog is displayed, just a few
    seconds after clicking 'modify' with the protection group selected.
    it was running DPM 2012 SP1 RU1, is now running RU3, this update did not make the difference I was hoping for. Also installation of the DPM console on a remote management server results in the exact same problem.
    Below is the error message. Has anyone else had this or a similar problem and solved it?
    Thanks,
    Jacob
    Description:
      AppName: mmc  AppVer: 4.1.3313.0 ModName: mmc.exe
    ModVer: 6.2.9200.16384  StackHash: 7C18B55A
    Problem signature:
      Problem Event Name: DPMException
      Application Name: mmc
      Application Version: 4.1.3313.0
      Module Name: mmc.exe
      Module Version: 6.2.9200.16384
      Exception Name: System.NullReferenceException
      Exception Point: Microsoft.Internal.EnterpriseStorage.Dls.UI.Dpw.SelectionPage.ConstructAllServersView
      Other: 7C18B55A
      OS Version: 6.2.9200.2.0.0.272.7
      Locale ID: 1043
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=190175
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Hi
    I had the same problem with Sharepoint backups, there was a problem with the protection group so i removed it and added it back. since then no issues.

  • Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?

    Hi,
    Can DPM 2012 SP1 be installed onto Server 2012 R2? i.e. is it compatible and also is it supported by Microsoft?
    If so are there any official documents or links provided by Microsoft for this installation scenario?
    I would have installed DPM 2012 R2 onto Server 2012 R2 but this is not possible due to DPM 2012 R2 not supporting Server 2008 protected servers!
    Thanks,
    Microsoft Partner

    Hi,
    DPM 2012 SP1 is not supported running on Windows server 2012 R2.
    System requirements for System Center 2012 SP1 - DPM
    http://technet.microsoft.com/en-us/library/jj651645.aspx
    Can you tell me how many Windows 2008 servers you need to protect and what is preventing you from upgrading them to Windows 2008 R2 ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Does not compile on LV 2013, but works fine on LV 2012 SP1

    I have an FPGA VI that compiles without issue with LV 2012 SP1, but does not work with LV 2013 and Xilinx Tools version 14.4. Why is this happening? I have attached the compiler log file.
    Attachments:
    XilinxLog.txt ‏1468 KB

    ba_0101,
    2012 SP1 and 2013 both use different versions of the xilinx compilation tools. As we don't produce that software it's hard to say exactly what may have changed in their implementation that is causing the compilation to fail. A quick look at the logs uncovers this error during the placement phase:
    ERROR:Place:120 - There were not enough sites to place all selected components.
    Some of these failures can be circumvented by using an alternate algorithm
    (though it may take longer run time). If you would like to enable this
    algorithm please set the environment variable XIL_PAR_ENABLE_LEGALIZER to 1
    and try again
    It looks to me like this error stems from this:
    ERROR:Place:543 - This design does not fit into the number of slices available
    in this device due to the complexity of the design and/or constraints.
    Which is a simple resource overmapping error. It looks like your design is rather large based on the rest of the logs. Am I correct in assuming this? During the compilation, what do the pre-synthesis device utilization reports estimate?
    With large designs it is common to sometimes have successful compilations and sometimes not due to the random nature of the compiler during the place and route phases. Does the design consistently fail in 2013 accross several compilation attempts?
    If you continue to see consistent failures, Xilinx's support documentation for this error suggests using setting an environment variable within the compile tools to use a different algorithm in the P&R phase. According to the documentation, this algorithm may take longer to execute, however it should improve the likelihood that your design successfully compiles. 
    Additionally, if the design is just over utilization, you may benefit most by searching your design for areas that could be quickly and easily optimized to decrease resource utilization. I hope this information helps, please post back if you have any further questions.
    Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Maybe you are looking for