Will setting an object on top of the time capsule harm it?
If I place an object on the top of the time capsule will it harm it?
If you want to place something on top.. use a wire rack or something so they are spaced adequately.. usually the hottest device on top which is likely to be the TC.. stacking is never a good idea with networking equipment unless you use forced cooling.. unfortunately apple built the TC with a fan but it never actually turns on until the TC is about to go into melt down. So you would want an external fan, blowing over the stack.. this is all a standard equipment rack is.. but the devices in it are large and exhaust hot air to the sides or rear.
Similar Messages
-
Connecting the time capsule to a wireless network (university)
I just purchased my first mac computer, and the time capsule. I am a university student, and my housing has wireless network, so i would need to configure it to that network (which requires registration). When I first opened everything up, I could see the time capsule in the airport utility, but now I cannot. I dont really know where to go from here, because all of the manuals go from being able to detect the time capsule. On top of that how do I connect the wireless to the registration required network? Any help is much appreciated.
how can I use the time capsule as a "wifi acceptor" to connect with my wireless network, and then boardcasting wifi signal to my devices?
Unfortunately, this is not possible.
In order to broadcast a wireless network with Internet access, the Time Capsule must be provided with a wired Ethernet connection at its WAN "O" port.
Check wtih your Internet Service Provider to see if they have an adapter or other device that will provide a wired Ethernet connection to the Time Capsule. -
Could I use a USB hub to connection both a printer and an external hard drive to the time capsule?
I am planning on purchasing a new router. The Time Capsule looks amazing. However, I have Macs and PC's in my how. So, I need to know if I can connect a printer (for all computers) and external hard drive (for the PC's) by way of a USB hub on the Time Capsule. I've read that you can do this with the Air-Extreme.
Couple of comments:
You will need to use a powered USB hub to connect multiple devices to the USB port on the Time Capsule
The hard drive for use with the PCs will not be compatible for use with the Time Capsule if it is currently formatted for Windows NTFS, which it likely may be if you have been using with the PCs.
Same info applies to the AirPort Extreme.
The following hard drive formats would be supported:
Mac OS Extended (Journaled)
MS DOS FAT32 -
I want to setup the time capsule on one network but use it on another
I want to back up all my music onto a time capsule, but take the time capsule to different location so that I may have my music there as well.
Can I do this?You will almost certainly have to re-configure the Time Capsule to work on the "other" network, but the data on the hard drive will not be affected when you do this.
-
I am set to send my top of the line HP pc in for repair
i am set to send my top of the line HP pc in for repair . im very pleased with HP as useual . i bought my HP AMD FX(tm)-8150 Eight-Core Processor with 8 gig ram 1 gig video card and all the good stuff over 1 year ago . i had blue screen problems from the begining . and i suspected it was a hareware issue and HP service was thinkoing it was software . so i was stuck with a top of the line pc with problems that could not be solved . but i didnt quit on HP i know they would help if i could just prove my solution was in fact hardware ., so months went buy and as hardware goes it can stay hiden for long and the problem got biger . so now i have the isues being adressed by way of FED EX and the HP factory . at zero cost to me ofcourse . the thing is that i buy HP pc BECAUSE OF THE QUALITY AND SERVICE . yes i can build my own pc for less cost . i have done it befor . but the extra cost for a HP qulity seviced pc is a diference of about $300.00 . insted of building my own with all the same parts i got now i could have built the same thing . but it would not be the same at all . no 24 hour on line service . no free shipping and repairs . no consant kowlage of the latest driver and products . at to top it of i also bought anougher 3 year exstended warenty service for $150.00 . so i got 4 years of service coming to me still that will garenteed me a great pc that sill works like a top of the line product should . garenteed . yeah we you got to understand a bit about building your own pc . it would have given me 10 companys to call for hahaha service , thats a joke . the 10 companys i wpould have had to buy a part from each one and not one company is going to garentee anything of anoughter product . so with HP it one call to one company that garentees you a service under understandable rules . so i just got maybe $75.00 of my warenty paid for just in free FED EX shiping both ways . so if you add it up and i have bough crudy pc parts befor and there is no help like HP to save me . so yeah i didnt get the best pc day one but what could we do till we could understand the problem . so i just think my day has come 5that all my money that i cant AFORD IS GOING TO GET ITS VALUE FROM HP . thats what i payed for and a home build pc is not what it adds up to realy be in the catolog . so i ant going quit till i see my HP pc back in 2 weeks and its going to work great or why would they fix it . it was just a isues we had wether it was software (windows) or hard ware . they could not fix a hard ware problem so i was screewed if i didnt quit thinking HP and me had toi get a solution and it can at last . i dont know how i new it was hardware . i built many pc befor just with junk parts and it was the same kinda thing is all i can tell ya . blue screen for all my exsperence has always been a hardware isues so i got the facts now my 1 gig video card is now showing the hardware problem so im glad i was right . im like being a dumb fool believeing in trust and honor and they had a righouse point that if windows was doing it they couldnt be held responcable and i would have been stuck . but i got my service and quality i payed for thats all i got to say . so i tell you i do laughf at people with priter problem i must say that my exsperence with printers is to just buy a new one every time it brecks i would not call HP for a printer glich . printers are crap that only last so long so . i buy a new one about once a year but its because they are so cheep that it would cost more in postage then the thing is worth fixing . but i dont kid around about my $1,397.00 HP pc thats not crap at all and it worth every penny . and i know HP ant dummys if they got a error in the pc deartment there going to fix it or they are going to sell anything to make there launch money . thats what i think any way . so my faith is in the repair department for now and my pc never did couse much if a big problem . i been useing it everyday . it would just shut down on me every so often . but it did bug me to spend that much money i dont have for a glich in a pc i love . so i just say . boy i hope they fix it good and not just the video card error but the root of the whole problem . so it will all go away . i hope i do . thank you HP and thank to all that suport a fine quality product and service that HP provides . im gonna go play my facebook game now . bye bye .
There are quite a lot of possible things that are going on. Can you let us know
1. What system you have (e.g. Windows 7, Mac OS Mavericks)?
2. What version of Acrobat or Adobe Reader you have?
3. WHO gets the message about a password (you or the receiver, or both)?
4. What is the full text of the message, if you get it?
5. If the receiver gets it, what security do you set on the file? -
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks
Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard. -
How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?
unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups -
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
I purchased a 2TB time capsule yesterday. I set it up as a router and did the backup no problem. I then navigated the backup folder and found that all my photos/video that I am nervous about losing are on there. So far so good.
Taking a step back, the reason I bought the time capsule was 1.) I needed a router 2.) I have a mac and 3.) I am running out of disk space on that mac (I shoot and cut a lot of video and have years of high quality pictures on my mac hard drive)
Can I now delete them from my mac computer to free space? I have used standard external disk drives in the past, but the whole "Back Up" piece of things has me confused. I love the idea of backing up my computer so I want to keep that functionality, but will the drive still function as a static external hard drive? Or do I need to move that material in seperately as a folder outside of the backup folder?
I am nervous that if the backup overwrites information as the disk space becomes limited that in 10 years when I fill this drive up, that I will lose all of my photos that are part of the backups that I am running now.....
Or worse, I am nervous that if I remove things from my mac right now, that the next time that a back up is performed that it will lose this data as it is not currently on the device I am backing up? How does this work?
I apologize, the back up is a very new concept to me and I want to make sure I do not goof anything up.applefool wrote:
Taking a step back, the reason I bought the time capsule was . . . 3.) I am running out of disk space on that mac
That's an entirely different thing from backups. A backup is an extra copy, in case the original is lost or damaged. Additional space is just that -- more space for originals.
While it's possible to use the same disk (such as the TC's internal HD) for both things, it's dangerous -- when (not if) something happens to the TC, you risk losing the originals that are on it. To be safe, you need (at least) two copies of everything important, in (at least) two different places.
Many (including me) recommend at least three copies (originals plus 2 backups). While it's not common for the Mac's hard drive to fail about the same time as the backup drive, it does happen. There are several threads here where it did, and very expensive data recovery was needed, but in some cases everything was lost.
So as the others recommend, getting an external HD for the stuff there isn't room for on your Mac is one solution for not having enough space. But you might explore getting a larger internal HD. If possible, that might be bettter.
Then, also get another external, for "secondary" backups, so you're doubly protected. If you get a portable model, you can take it offsite for even better protection. See #27 in Time Machine - Frequently Asked Questions for details and some suggestions.
Can I now delete them from my mac computer to free space? I have used standard external disk drives in the past, but the whole "Back Up" piece of things has me confused.
You're not the first or only one.
There are different types of backup apps, so there are different answers for the different types.
As the others have posted, Time Machine will, sooner or later, delete it's backup copies of things that are no longer on your system. Depending on how long the original was there and when backups were run, that can be in as little as 24 hours, or as long as there's room. So no, don't take the chance with data that's important!
Is there helpful information on how to add an external drive to your backup set up?
See the green box in #2 of the FAQ article. All you have to do is format it for a Mac and remove it from the exclusion list.
Once I set it up, will I need to leave the hard drive plugged into my mac in order for the data to be backed up?
It can only be backed-up while it's connected.
If I do, and a back up is performed without the hard drive attached to my computer, will it remove the backup of what was on the hard drive
No (unless you leave it disconnected until Time Machine starts deleting old backups).
It will back up the external when it's connected, and not complain if it isn't. -
how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.
Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool. -
How to set up the Time Capsule as an access point
Hi there,
I have home office and am having wifi-connectivity issues due to the layout of my home.
I'm getting the electrician to set up ethernet outlets in various rooms in my house so that I can get wired connections in several rooms. What I want to do is connect my Time Capsule to one of those ethernet ports (see the diagram below) so that I can still broadcast a wi-fi signal in my house while having wired connections elsewhere.
|->
Lan Port 1
Home Office (Laptop)
|
|->
Lan Port 2
Living Room (TV)
Modem
->
Wired Router
|
|->
Lan Port 3
2nd Bedroom (Xbox)
|
|->
Lan Port 4
Dining Room (Time Capsule)
In my research in how to set this up, I've come across documentation that shows how to convert an old Netgear/Linksys wifi router to an access point. Here's an example of the documentation I've run across: http://www.smallnetbuilder.com/wireless/wireless-basics/30338-how-to-convert-a-w ireless-router-into-an-access-point. What I haven't encountered is how to do this with a Time Capsule.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Thanks a ton for any help or advice. It's much appreciated.Excellent.. great to see people doing the job properly and wiring ethernet.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
Apple system is slightly different.. although the AP method would work the TC has a programmed state for placing it in AP mode.
And Apple even documented it.
http://support.apple.com/kb/HT4260
The difference in your system, is you are not using an Apple primary router (I presume) but otherwise the same.
Any router setup as WAP, you bridge the router part.. and you use Same wireless name.. same security setting (WPA2 Personal is WPA2 AES and the only one suitable). Same passkey..
I would add one difference to the apple insstructions.. they depend on auto wireless channels working. IMHO, auto anything in wireless is akin to voodoo black arts and has more to do with beads and rattles than science. It works fine in some case.. terrible in others.. lock it down. Set the wireless yourself.. at 2.4ghz there are only 3 non overlapping channels.. 1, 6, 11 .. if you use 300mbit N on the main router, it will use 2 of those channels.. choose the third for the TC.
Of course the TC can also use 5ghz.. and I lock it down as well but that is more my control freak nature.. and strong skeptism of anything auto in the wireless world.
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Your number auto changed.. fun isn't it when i edit it shows correctly but when I post it changes the format.
On the new setup the printer will still be available to all clients .. whether wireless or wired.
And to second part, yes, all file access is not going to change.. well I don't predict any.. IP of the system might change around but overall you are creating a single flat network. And that will work fine. -
How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!
I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two. -
I recently added a new printer to a 2005 vintage PC that is running windows 7. It used to go through a router in my wifes upstairs office to the time capsule by wired ethernet (cat5) but when I added her new local printer thought I would network it, big mistaked, lost all my ethernet connection and she cannot get to the internet. Wireless not an option. How do i set up again the ethernet connection and i will only USB the printer locally this time for the windows pc?
Tried windows diagnostics, and besides telling me to reset everything and turn router off and on etc. I am in an endless loop.
Other Mac products are not impacted by this issue.I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour. -
Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?
A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.
Maybe you are looking for
-
New memory modules possible on MS 6119?
Can someone help me out with this small problem? I have a MS 6119 motherboard with 64 mb ram. I want to upgrade to 256MB with 2 modules 128MB SDRAM PC133. Is this possible because in the manual it only says PC100 is possible...
-
After updating to ios 8 i keep losing my internet connection, and have to restart every time?
After updating my ipad mini to ios 8, i keep losing my internet connection and have to restart.
-
In fact there is no response to clicking the icon.
-
Putaway Strategy Configuration: Near Picking bin
Hi, I have to prototype a basic scenario for the putaway strategy: Near picking bin(K) in WM. I am unable to find any material,links that would help me with the step by step config to implement the same with an example to understand the process..
-
Implementation of Linked List class
I am trying to implement the Linked List class for one week, but I couldn't figure it out. If you know, please let me know.