Will siebel 8 application support IPv6

Hi All,
Could anybody confirm whether Siebel 8.0.0.0 SBA installation (Server, client, WebServer Extensions) supports IPv6 model IP addresses.
Please confirm.
Thanks

Hi,
plz see Metalink Note: ID 536266.1]
Internet Protocol Version 6 (IPv6) support for the Siebel CRM application [ID 536266.1]
The Siebel CRM application is transparent to the internet protocol, therefore this would be supported.Please refer to the Siebel System Requirements and Supported Platforms guide for the Siebel CRM version you are implementing for further information about this.
Best Regards,
Nasierkhan Jahangier

Similar Messages

  • How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

    How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

    Cross your fingers and hope.
    Obviously if there is any big or known threat Apple will send out a firmware fix.
    But the TC is designed to be end user simple device. It has no firewall that is visible at any rate. I don't know that it truly doesn't have a firewall but it is not part of the end user controls.
    IMO if you have major security concerns that go beyond end device firewall, which is where Apple do put most of the security, since firewall in the router is plainly not a stop to anybody deliberately downloading an infected file or website, and most end users.. do not want a firewall that prevents them using the web like a business does, where only certain ports are allowed. Everything else tough luck.. you are not allowed to use it. Then TC is unsuitable for you anyway.. buy a proper firewall appliance.

  • No Logic folder at Application support folder

    Hi,
    Related to the following article, I want to move my logic content to an external harddrive.
    http://music.tutsplus.com/articles/how-and-why-to-move-your-logic-pro-x-sound-li braries-to-an-external-drive--audio-19567
    1st question: There is no HD/library folder on my harddrive. The only library folder I got is HD/user/username/library
    Is this normal? Becaus in the youtube video in the article there is.
    2nd question: I don't find the logic folder in HD/user/username/library/application support
    And I need it to move my content? Does mavericks have a different location for logic?
    I'm runing Mavericks OSX version 10.9.2
    I installed all of logic additional content.
    Please help! I'm looking in to this for hours.

    At the root level of your hard drive folder, you should see a folder simply named "Library" - inside that you will find an "Application Support" folder:
    You just double-click the name of your boot folder (usually "Macintosh HD" unless you've named it something else) and you'll find the Library folder.
    Clinton

  • Hyperion System 9 BI supports IPv6?

    Hi I would like to find out if the following hyperion applications supports IPv6?
    - Hyperion Shared Services 9.2
    - Hyperion BI 9.2
    - Hyperion Interactive Studio 9.2

    -Centralized administration using Shared Services.
    -Workspace introduction for user friendly interface.
    -Centralized user management, provisioning.
    -Hyperion Business Rules are moved as a part of EAS now.
    ...and many more from architecture pov.
    Contact us for more details.
    Harbinger Consulting Group
    www.harbinger-group.com
    763 785 1028

  • How can I access my application support folder from my new macbook retina?

    I would like to access my application support folder so that I can modify my minecraft, but I cannot seem to be able to find any way of reaching it. Any help would be greatly appreciated thank you.

    Specific for User
    Open the Finder
    Click on the 'Go' menu in the top menu bar.
    Hold down the 'Option' key on the keyboard
    'Library' should appear in the menu between 'Home' and 'Computer'
    There you will find the 'Application Support' folder.
    For System
    Click 'Go'
    Click 'Computer'
    Open 'Macintosh HD'
    Open 'Library'
    The Application Support folder should be there.

  • My itunes will not open! is giving me error7(windows error 1114) RUNING TIME  ERROR, PROGRAM FILES\ITUNESHELPER.EXE R6034 An application has made an attempt to load the C runtime library incorrectly. I must contact the application support team for imforma

    my itunes will not open! is giving me error7(windows error 1114) RUNING TIME  ERROR, PROGRAM FILES\ITUNESHELPER.EXE R6034 An application has made an attempt to load the C runtime library incorrectly. I must contact the application support team for imformation and  i tried downloading itunes like 10 times and is saying the same thing. Please help! i need to sync my ipads and ipods thank you!

    Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086

  • Itunes 10.1 will not download because I can't get old apple application support off my computer windows xp

    itunes 10.1 will not download because I can't get old apple application support off my windows XP. Help!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • When opening itunes i got the following message:  "Apple Application Support was not found.  Apple Application Support is required to run itunes. please uninstall itunes, then install itunes again." if i do this will i lose my music library?

    when opening itunes i got the following message:  "Apple Application Support was not found.  Apple Application Support is required to run itunes. please uninstall itunes, then install itunes again   Error 2 (Windows Error 2)." if i do this will i lose my music library?

    Hi texasslagle,
    It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
    There is an article that you may want to use to try to complete your install here -
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
    you can download the itunes http://www.apple.com/itunes/ here
    then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
    you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

  • HT201413 updated last night and now ipod says to coonect to itunes which i cant because apple application support was not found.  tells me to uninstall and reinstall itunes.  Will i lose all my music or is it still on my ipod?

    Updated ipod last night and now when turned on tells me to coonect to itunes (picture of usb cable with arrow to itunes).  I can't connect to itunes on computer because apple application support can't be found.  Tells me to uninstall then reinstall itunes.  Will I lose all my music or is it still on my ipod?

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters.)

  • PhotoShop external editor doesn't show up in Preset file application support. It is listed as the top external editor. But will not go there

    PhotoShop external editor doesn't show up in Preset photoShop file application support. It is listed as the top editor in the Light room preference. But it will not go there. You can use export to Photoshop CC but not as a editor. It stays there. I have OS10.8 and Photoshop CC not Photoshop CC2014 at this time. If I go to presets in Lightroom preferences and push restore export presets
    do I also lose my plugin presets and have to reload them ?

    Trakibounce:
    Glad you were able to resolve your issue. Thanks for posting back with how you did it.
    HAPPY HOLIDAYS!
    cornelius

  • How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

    HI All,
    We are using Oc4j version 10g 10.1.3 , and while starting conatiner  getting below warning , let me know if anyone have solution for this,.
    14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
    Please take the appropriate actions to migrate to an alternative strategy! **********
    2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
    of this product!

    I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
    So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
    Anyhoo, while I was in the BIOS I found two things which I had questions about :
    1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
    2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
    I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

  • When starting iTunes get the following message " Apple Application Support is required" uninstall and re-install iTunes. Question will I lose all records currently in iTunes ??  H=

    Get a message on Itunes to uninstall and re-install Itunes since " Apple Application Support is required" Will this cause me to lose all records? Is there some to avoid this have tried to repair No LUCK

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Does oracle application server 10.1.3.3 supports IPV6

    hi
    Anyone let me know does oracle application server 10.1.3.3 supports IPV6.
    thanks in advance
    Arunachalam

    Hi
    I believe this is covered in the online documention:
    http://download.oracle.com/docs/cd/B32110_01/core.1013/b28944/opmnxml.htm#BABIICIJ

  • Itunes will not run, apple application support not found

    error when I install and try to run iTunes.  Apple application support not found, uninstall and download again

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for

  • PHP Form Redirect without Header function

    I need help with a PHP form that needs to redirect to a thankyou page upon sending. I have tried the header function but it doesnt work because i have multiple PHP references throughout the page that prevent the header function from working. Is there

  • Install Domain Controller, Active Directory, RemoteApps on Single Server?

    Have a server that I want to experiment with RemoteApps.   Documentation I have read state you need to have a Domain Controller setup with AD on one server, and have a second server to install all the RemoteApps requirements. Is this true or can this

  • Error connecting to database after upgrade P6 R7.0 to P6 R8.2

    Dear friends, could you help me, i have problem with primavera P6, currently we using P6 R7.0 with server client. i have succesfully to installed it at sever and client and database connected too. but after we purchased the new version R8.2, and i ha

  • When will the next ESR release be available?

    Hi - I am writing some GUI based code and plan to release towards the end of the year. I imagine that a new FF ESR will be available by then. When will the new version of FF ESR be available so I can try and ensure that we test our GUIs using it? Tha

  • How do I read .rtf files on a Mac?

    I have a bunch of rtf files, but my Mac can't read them.  Is there a way to read them?