Will signal strength or internet speed suffer when using a Generation 1 Time Capsule and wireless extending a network with a Generation 5 Airport Extreme

I have a wireless network in my home and I have a Time Capsule 1st generation and a Airport Extreme 5th Generation, will this cause my internet to be slow or have glitches with signal strength?

We've gone over this in the other thread.
If the Time Capsule will be connecting using wireless only, everything depends on the quality of the connection between the AirPort Extreme and Time Capsule.
The quality of the connection will be affected by the distance that the Time Capsule is located from the AirPort Extreme and any obstructions in the signal path.
If you have a ceiling between the AirPort Extreme and Time Capsule, then you should expect the signal arriving at the Time Capsule to have lost 30-40% of its bandwidth (speed). So, the Time Capsule can only repeat the weaker signal that it receives.
Other walls or other obstructions like heavy furniture, large mirrors, etc will also affect the wireless signal as well as cordless phones and other wireless networks around you.
If you are lucky enough to have line-of-sight between the AirPort Extreme and Time Capsule, then the wireless connection between those devices can work quite well. Few of us have this luxury, and must settle for significant compromises in performance.
If the wireless connection between the AirPort Extreme and Time Capsule does the job for you reliably, then you can leave things as is. If you are not getting the reliable performance that you need, then you will need to establish a wired Ethernet connection between the AirPort Extreme and Time Capsule.
As you might imagine, there is virtually no signal loss in a wire, even up to 300+ feet or 100 meters.

Similar Messages

Airport Express + Time Capsule and wireless access to internet

I have a wireless internet provider. It's an open access without encryption.
I would like to have the airport express connect wirelessly to the internet then connect the airport express by ethernet wire to the WAN port in the time capsule and then have a local encrypted network from the time capsule in order to access with my mac book wirelessly to the time capsule.
I tried all ways of configuring it but none worked.
Do you know if it is possible and what should I configure ?
If somebody can help me... I am getting crazy with that...

This will not work. The Ethernet port on the AirPort Express (AX) is active only when the AX uses WDS to wirelessly join a network. Unfortunately this requires you to be using a compatible base station to create the wireless network AND you must configure the base station and AX to connect using WDS.

I accidentally set my airport express to base station when it should be my time capsule and can't set it back

I'm an idiot!
I have my Time Capsule as my base station. I have two Aiport Exrpres' that connect to them.
One of the AE's was not working right, so I went it, did a soft reset, and using the Airport Utility, I accidentally identified the AE as the base station.
I've now gotten the Time Capsule set as the base station, and of of the AE's working off of it...however, when I plug the other AE in, it trumps the Time Capsule and shows it as the base station, and then the TC doesn't work.
I've tried doing a soft reset, and then hitting forget, but I can't figure out how to how it show as the child to the parent (the TC), as the other AE does.
Help!!
Thank you,
Dennis

Thank you, that seems to have done the trick...I knew Apple would be much easier than Windows!
I appreciate your help!
Dennis

Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

The iPad has a micro-SIM card slot - nothing special or unique about it.
The iPad is not sold as carrier locked.

Internet speed significantly slower using Time Capsule

I have a 50MB internet connection and a Time Capsule. I use the Time Capsule to wirelessly connect my iMac to the internet. I also have a desktop PC with an ethernet connection to the Time Capsule. Lately the internet speeds have been very slow when I connect via my Time Capsule. I experience slow speeds from the wireless and wired connection. On speedtest.net, I can't even get the test page to load. On my PC, when I unplug my ethernet cable from my Time Capsule, and plug it directly into my modem, I get fast 50MB speeds on speedtest.net. When I plug the cable back into my Time Capsule, the speed is slow again.
Does anyone know why the Time Capsule is causing my internet speed to be significantly slower than connecting directly to the modem? And more importantly, how can I fix the issue?
Thanks, Brian

Hi Brian,
Every couple of months I also experience the very slow wi-fi connection through Time Capsule (currently on firmware 7.6.1 but the problem has occurred also with older firmwares).
I have been able to fix the slow connection this way:
Test your laptop's wi-fi speed to verify the problem. For example, I'm getting only 2 MBit/s download speed at speedtest.net when the Time Capsule slows down, although my operator provides super-fast 100 MBit/s connection.
Detach the (Internet) Ethernet cable from the Time Capsule.
Connect the same (Internet) Ethernet cable directly from ADSL or Ethernet wall plug to your MacBook (or any other computer that experiences the slow wi-fi connection).
Run the Speedtest.net test again. Now you should obviously get "full" Internet speed without Time Capsule (for me it means about 75 Mbit/s, never quite the same the operators promise ;).
Detach the Ethernet cable from your laptop and connect it back to the Time Capsule (wait until the green light on Time Capsule). Test again with Speedtest.net. (Now I get around 60 Mbits/s over Wi-Fi, that is OK). Interestingly the problem now disappears and stays fixed for several weeks or even a few months, after which I simply repeat this process when needed.
I am currently running Time Capsule firmware 7.6.1 but the issue has happened on later versions also. Perhaps you will experience it after running 7.5.2 after a few weeks or months?
For background information I am running on the same Time Capsule's Wi-Fi network:
A white MacBook with OSX 10.7.3
Samsung laptop PC with Windows XP
Two iPhones (3 and old 4)
Playstation 3
Apple TV
Hope this helps!

Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access.

Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access

Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Moved to DPS forum.
You need to set up the pages appropriately for the target device. For iPad that's 1024x768.

Do I have to be connected to internet when using illustrator through creative cloud? And can I change the language on the trial version if I would extend it to pay version? Thank you in advance.

Do I have to be connected to internet when using illustrator through creative cloud? And can I change the language on the trial version if I would extend it to pay version? Thank you in advance.

Lelisa it is only necessary to connect to the internet periodically to receive updates and validate your membership. If you have an annual membership you can be offline for up to 99 days. You can find additional details at Activation & Deactivation Help.
I would also recommend reviewing Creative Cloud Help | Install, update, or uninstall apps which discusses adjusting the installation language.

HT1695 when I tap my home wi-fi,and choose my home network, it goes to a scche internet?

When I tap my home wi-fi, and choose my home network, it goes to a screen concerning an ip address and other info which I do not understand. How can I connect to the internet?

See:
iOS: Connecting to the Internet

I have an apple time capsule and am about to have xfinity cable and internet hooked up in my new apartment. The cable provider said I need a modem that is Docsis3 capable - will my time capsule do the job or do i need another modem? Thanks

I have an apple time capsule and am about to have xfinity cable and internet hooked up in my new apartment. The cable provider said I need a modem that is Docsis3 capable - will my time capsule do the job or do i need another modem? Thanks

will my time capsule do the job or do i need another modem?
The Time Capsule is only a router...with a built in hard drive. It does not have a modem built in, so you will need to use a separate modem with your new calbe service.
If the cable provider offers a modem with their service it would be good idea to use that device, as you know that it will be supported by your provider in the event of any Internet connection difficulties.
If the provider does not offer a modem, I am sure that they have a list of compatible modems on their website, or check with customer support for more information.

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

I have a 2nd gen airport extreme (no time capsule) and 2nd gen airport expresses: is there any new additons I can make to my existing network to improve reach and integrity of signal?

I have the older airport extreme and 2 2nd gen airport expresses in a large house. Lately I have been getting complaints about internet "drop out" and weak signal (orange signal - weak network) in one (oddly enough the nearest one to my extreme). What can I do to insure network and internet integrity going forward. Do I buy a new a. extreme and convert the old one (how is also a question)? Do I buy new expresses? (and why) Do I move the original express out of room and get longer internet cable? Extreme is upstairs in a split level and must remain there because of proximity to modem and its connection to security. The "working" express is all the way on the other side of the house through 2 concrete walls and does ok - though signal is understandable week. The nearer one with the "problems" is at the foot of the stairs less than 50 feet away, behind an always closed door (not tested-belongs to teenager voicing complaints). Incidentally the other bedroom directly across from the closed door one, houses a temporary adult child at home who has no problems with their lap top (2nd gen macbook) and signal.

There is no easy answer to your question, but here are some things to think about.
The newest generation of airport extremes and expresses are dual-band devices. they transmit on both 2.4 GHz and 5 GHz frequencies. the 2.4 GHz frequency penetrates walls better than the 5 GHz frequency which is faster in terms of data throughput. they also have improved antennas which may help your signal problems. unfortunately the only way to be sure would be trial and error you can also walk around with a laptop and monitor the signal strength to see where you have dropouts and consider repositioning your express devices to compensate .

Using Time Capsule to Wirelessly Receive Internet and then Extend Network via Ethernet

Hello,
Our modem/router combo is located downstairs, and my computer that i want to get online is upstairs. I cannot get a ethernet from the modem to my computer to access the internet, so I wanted to try to use my Time Capsule to help me get online upstairs (not sure if this is possible...)
My idea was to have the Time Capsule receive the wireless signal and then connect the computer to the Time Capsule through an ethernet so that I may get the computer online. Essentially wireless connection in, wired connection out.
I've been playing around with the device for a while now, and can't seem to make this work. Has anyone used the Time Capsule in this fashion? Is it even possible? If not, does anyone have any suggestions on how to get my computer online?
Thank you very much for any help/input!!

Why not try a pair of these over domestic power loop.
http://www.netgear.com/home/products/powerline-and-coax/high-performance/XAVB510 1.aspx#two
Not cheap though Best buy link
http://www.bestbuy.com/site/NETGEAR+-+Powerline+Ethernet+Adapter+Kit/5042106.p?i d=1218603011817&skuId=5042106
The Apple solution might well need Two devices to extend range.
You would retain your ISP router/modem however would go into settings and TURN OFF wireless on that device - you can do this in the Java Web based control panels on most routers.
Now you sling the Ethernet cable between that router and a purchased Time Capsule device locally and set this up to create a new local Wifi network (Replacing that of the ISP supplied router) . Being a dual band device and being able to broadcast both over 2.4 Ghz and 5 Ghz frequency base bands simultaneously you could well see improved performance and range straight away.
However if not then you are going to need a further device an Airport Express set up in bridged mode somewhere between the Time Capsule and your upstairs rooms. Your may have to try various power points and locations to get coverage required.
Further Airport Express devices can be added in bridged mode as required to cover blind spots, however remember each additional device degrades the overall network performance somewhat.
Again this will get quite costly.

Is there any downside to using a reference type library if I use Time Capsule and will do file management only from within Aperture?

Have done a lot of reading to get prepared to convert to Aperture 3 and have this question regarding setting up my library type.
I'm not a professional -just a heavy user hobbyist.
It appears that the major factors in using reference style is to backup the images with Time Capsule and always do moves or deletes from within the Aperture application.
If my architecture matters here's what I have that may be involved in photo management and editing:
iMac (latest 27" high power version with lots of memory)
Internal 2TB HD where the library is stored
External (FireWire) 2TB HD where the images are stored
External (FireWire) 6TB HD backup drive
In the future an iPad for remote work on images (when/if available) and a Mac laptop (for same remote use)
I see major downside issues to letting the library manage my files - such as inaccessibility (or awkward accessibility) to the images for other programs, and performance issues when the library gets large (thousands of images or 100+ gb in size)
The chief complaints I've seen regarding using a reference mode is the broken link issues created if file management is done outside of Aperture (adds, deletes, moves of files) and the inability to use the Vault function for backup.
One feature that I imagine I'd like to have is maximum integration with Final Cut Pro X and that's one area I haven't seen much on and would be interested to hear about if that integration is affected with the choice of managed vs referenced library types. (I like to produce film clips that are combinations of pics and video and want to be set up so that is done in the easiest fashion when working in FCP X)
I'm sure I've not seen all sides of this issue and would like to see some discussion around this question.
Thanks to everyone contributing!
Craig

Goody, Goody, you hit a few of my favorite subjects! Herewith some comments, with the usual caveats - true to the best of my knowledge and experience, others may have different results, YMMV, and I could be wrong.
I run Aperture on two machines:
-- 2007 Mac Pro with 2x2.66 GHz Xeon, 21 GB of RAM, a 5770 GPU, and multiple HD. I have about 11,000 images, taking up 150 GB. (Many are 100 MB TIFF, scanned slides)
-- 2006 Mac Book Pro with 1 2.0 GHz Core Duo, 2 GB of RAM and a 240 GB SSD.
Two very different machines.
-- Aperture Libraries are all the same - Managed or Referenced. If Managed, then the Master image files are inside the Package, if Referenced, they are outside, and you can have any combination you want. Managed is easier, but Referenced is not hard if you are the least bit careful.
-- While the sheer size of an Aperture Library is not a big issue, the location on disk of the different components can have a tremendous impact on performance.
-- Solid State Drives (SSD) read and write faster than regular Hard Disks (HD) and, what is more important, empty HD read and write much faster than full HD.
-- Aperture speed requires a combination of RAM, CPU, graphics processing unit (GPU) speed, and disk speed. The more RAM you have, the less paging you will see. With enough RAM, the next bottle neck is CPU (speed and cores) and GPU speed. But even then you will still have to fetch an image (longer if you pull the full resolution Master, read and rewrite the Version file, and update the Preview and Thumbs.
So what works?
-- RAM, RAM, and more RAM. 4 GB will work, but you will page a bit. 8 GB is much faster. On my old MacPro the sweet spot was about 16 GB of RAM.
-- Keep your Library on your fastest (usually internal) drive. Keep that disk as unloaded as possible. How do you keep it unloaded? Either buy BIG, 1 TB+ or move your Masters off onto another disk. The good news here is that as Master files are written only once and never rewritten, speed of this disk, as opposed to the disk that holds the Library, is not important. There is a one second pause as the Master is read into memory and, if you have enough RAM, that is it - the Master will never be paged out. If, on the other hand, you do not have enough RAM, and you do a lot of adjusting at full resolution, then the speed of the disk that holds your Masters will become very important due to paging.
-- I found that I picked up a tiny bit of speed by keeping the Masters on a dedicated disk. Thus, in your configuration, if you can dedicate that 2 TB FW HD to your Masters, you should see very nice performance.
Final notes on backups and archives:
-- One conventional wisdom is that you should make an archive copy of every image file before or as you load them into your system. (Aperture in this case.) This archive is then never touched or deleted.
-- An alternative approach is that you do not keep such an archive, but only the images that you have in your Aperture Library. And when you delete from the Library, you no longer keep a copy anywhere.
I do the following:
-- Card to Aperture. Card is then kept at least 24 hours until all of my backups have run. (I use three - Time Machine, Clone, and off site.)
-- I do not keep archive copies. If I decide to delete a file, my only recourse is to recover it from Time Machine during the six month cycle of my Time Machine backups. Thereafter, it is lost.
There are merits to both approaches.
Hope this is clear, correct, and responsive to your needs.
DiploStrat

Time Capsule Slow WLAN to internal disk with internet data transfers

All,
I've been experiencing slow responses from my Time Capsule since I got it. It is one of the newer models with dual band and I have a Macbook Pro and a Macbook connecting to the 802.11n network.
I use the internal disk of the Time Capsule as a NAS and I don't use it for Time Machine backups. It houses software, pictures and music files.
When I'm downloading files from the internet via Safari, or via Transmission (torrents) the wifi throughput of the WLAN slows down from about 5 megabytes per second to just a couple of hundred kilobytes per second.
For my tests I used a 2.2Gb DMG file (a Garageband Jampack) which was housed on the Time Capsule disk.
With Transmission running and downloading two torrents and seeding two torrents (capped upload of 2 kilobytes per second), the transfer of the file from the Time Capsule was 4 hours. I let it run a few hours just to determine that the ETA in Finder was fairly accurate.
With Transmission stopped, the transfer of the same file took 9 minutes.
With Transmission stopped but with Safari downloading a large file (400mb), the local Time Capsule file download to my Mac was again looking at around 4 hours.
It also impacts file uploads to the Time Capsule disk but no where near as badly as with downloads. According to activity monitor, throughput from the Time Capsule disk to my Mac over Wifi is around 200 kilobytes per seconds, writing to the Time Capsule was around 900 kilobytes per second.
Both upload and download speed increases dramatically when no internet based file transfers are taking place.
Now the odd thing. I have a TVIX 6500a media player attached to the Time Capsule via gigabit ethernet. In all the tests I've performed (using the same DMG file) the data transfer rate, both reading and writing to the TVIX has always been solid at nearly 5 megabytes per second.
It is almost like the Time Capsule prefers internet originated traffic over WLAN traffic to its own internal disk, and really throttles this traffic. And it lets traffic originating from other devices on the network through on all cylinders.
I know technically a Time Capsule is designed for Time Machine however I can't see how it would be a viable solution given the bad data rates when downloads are taking place.
Is there any way to get under the hood of a Time Capsule to make some adjustments? I wonder if anyone else has had any experience with this, and what might happen if I plug in a USB disk and use that instead. It is starting to look like I might have to get a decent NAS to connect to the Time Capsule but then it is just a larger heavier Airport Extreme.
Thanks in advance.

Mikecad1 -
I dont have any assistance to offer, but have experienced similar problems.
When trying to offload all my music from an external drive to a Time Capsule, it was estimating WEEKS to do it. Even with the HD connected right to the Time Capsule. It's like the WLAN wanted all traffic to go out then come back in before being written.
My solution in that case was to disconnect my laptop from the WLAN, with the drive hooked up to it via USB and then Cat5 to the Time Capsule and do a direct transfer like that. 2 hours instead of weeks.

Will signal strength or internet speed suffer when using a Generation 1 Time Capsule and wireless extending a network with a Generation 5 Airport Extreme

Similar Messages

Maybe you are looking for