Will Slow Rendering Time be Worth it?

My iMovie project is 2:06:20 in duration. iDVD is very strict about only burning DVDs under 2 hours. I am rendering my iMovie project using "Share > Media Browser > Large". It is going to take some estimated 570 minutes. Is the time spent rendering the movie worth it? (And how come iMovie '08 seems so much slower and importing and exporting video? Is the quality much better?)
If iDVD refuses to burn I've been told to create an image and burn it with toast or Final Cut Studio.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Windows Server 2008 should already have CTCP enabled; but Windows 7 hosts might not.
Using a module has the all the normal pros and cons.  So, cannot say a stand alone unit would be better, although the latter does provide you more selection options, including 3rd party.
Normally, yes, you need WAAS hardware at each site.
PS:
Just increasing a host's RWIN will often allow it to push a LFN to capacity.  However, slow start really does become slow start when latency is high.  This can also be a problem if sending lots of little files, i.e. each one starts slow.  Small files might not even allow the transfer rate to reach full speed.
Also a problem is standard TCP's adaptive flow rate, which increases very slowly when latency is high after a packet is lost.
I believe there are file transfer utilities, that transfer a file using multiple TCP sessions.  This can greatly increase the transfer rate on a LFN.

Similar Messages

  • SLOW rendering times

    Hi!
    One of my biggest gripes is the slow rendering times with FCP. I know that it's some setting that I have wrong, but I can't figure it out for the life of me. I started with HD video captures using the ProRes 422 codec, but it would take a REALLY LONG time for it to render.
    For simplistic sake, I started again with just a simple video I took of a screencast. The video is saved using Quicktime in 636x480, HD.264, and a SD (6-1-6) color profile. There is also no sound to the movie...just video. I figured that this would be a really simple way to try some things out, but I was wrong.
    I setup FCP as a number of different codecs and resolutions. I imported the file by just dragging and dropping the .mov video into the Browser in FCP. I then dragged and dropped it to the timeline, and did a render/all.
    Even by doing this, it is taking 8 minutes to render a 2 minute video. There must be something I'm doing wrong, and I can't figure it out. I was watching a youtube FCP demo and this guy rendered a video in about a minute on a g5. Being I have a dual-core intel, I can't imagine it taking as long as it is. I appreciate any help and I know there's a million threads out there...but I just can't seem to grasp this.
    Thanks!

    Hi! I suppose the information below would be helpful. I'd like to get started with a screen capture from Snapz Pro X. Here are some answers to the questions...
    Program: Snapz Pro X Screen Capture v2.2.2
    Record Settings Used:
    - Compression Type: H.264
    - 30 Frames Per Second
    - Key frame every 500 frames
    - Encoding Mode: Single-pass
    - Compressor Quality: Best
    FCP Version: 7.0.2
    Within FCP, this is where I get confused because of all the options.
    In the "Easy Video Setup" portion, I have...
    Format: Apple ProRes 422
    Use: Custom
    - Sequence Preset: DV NTSC 48khz
    - Capture Preset: DV NTSC 48kHz
    - Device Control Preset: Non-Controllable Device
    - Playback Output Video: Digital Cinema Desktop Preview - Main
    - Playback Output Audio: Default
    - Edit to Tape/PTV Output Video: Same as playback
    - Edit to Tape/PTV Output Audio: Same as Playback
    In the "Audio/Video" Settings, I have the following...
    Sequence Preset: DV NTSC 48khz
    Capture Preset: DV NTSC 48khz
    Device Control PReset: Non-controllable device
    Video Playback: Digital cinema desktop preview - main
    Audio Playback: Default
    Sequence Presets: Default settings for DV NTSC 48kHz
    Capture PReset: Default settings for DV NTSC 48kHz
    Device Control: Non-controllable device
    a/v devices: digital cinema desktop preview - main
    - mirror on desktop checked
    - audio: default
    - 'do not show external av device warning' is checked.
    Now, if I right click on the project in the "Browser" window and choose "Sequence Settings", I have the following...
    Frame Size: 640x480 NTSC 4:3
    Pixel Aspect Ratio: NTSC - CCIR 601/DV 720x480
    Field Dominance: None
    Editing Timebase: 29.97
    Quick Time Compressor: H.264
    Quality: 100%
    Audio Rate: 48khz
    Audio Depth: 16 bit
    Audio Config: Channel Grouped
    Video Processing: All grayed out except 'normal' is selected for motion filtering quality.
    ================
    Now, this is where I get really confused with FCP. Everybody says to set it up with the same settings you use to record. Does the "Easy Video Setup" work hand-in-hand with the "Audio/Video Settings"? Should you skip the easy setup and just jump into the A/V Settings?
    WHile typing this message, I also noticed that the "Sequence Presets" in the Audio/Video Settings are set to 720x480 using millions of colors. In the settings for the file in the "Browser" Window, I have it set to 640x480, which is different than what's in the av settings. Should these be the same?
    I'm just getting started with FCP, and these are just the questions I have. What is the 'workflow' one takes to do this? Start FCP, setup the 'audio/video settings' area, choose the preset, edit the sequence preset to something basic, and then drag and drop your mov files in? I suppose it's just confusing because you can set the video settings in FCP, in the 'easy setup', if you right click on the project and choose settings, etc... Which one has precedence over the entire project?
    Sorry for so many questions.
    Thanks in advance...

  • Slow Rendering Time After Installing Final Cut Studio 2 Upgrade

    I have a Mac Pro with two dual core processors, 8 GB of Ram, and 1 Terabyte of storage. I'm running the latest version of OSX. Ever since I upgraded to Final Cut Studio 2 my rendering time in Final Cut Pro 6 has become painfully slow. For example, it now takes at least an hour to render a short 5 minute video project. A project that size used to take just a few minutes. I uninstalled Final Cut Studio using AppZapper because I couldn't figure out how to remove the program any other way. Then, I reinstalled Final Cut Pro 6, but it didn't fix the problem. I called Apple's Final Cut Studio tech support, but they just had me upgrade Final Cut Pro 6 to 6.0.1. Unfortunately, this didn't fix the problem. Everything worked fine with Final Cut Pro 5, but ever since we upgraded everything has fell apart. Can anyone give us any insight into fixing this problem? So far, Apple's Final Cut tech support has been unable to find a solution.

    Just a couple things to double check.
    1. Repair Disk permissions, RESTART.
    2. Try setting your RENDER DRIVE to something Different than the Media drive, RESTART.
    3. Try Hosting your Media on a new Drive, RESTART.
    Also, at this point since you are having system problems, I would backup all of your Media, Projects, etc. I just read a post of someone else that didn't have backup of their project and it became corrupted. I use Lacies SilverKeeper to automatically backup about 20 times a day, so we have dupes of at least all our Projects. And the first thing I do every morning is start the system up, repair disk permissions, and RESTART.
    The reason why I suggest restarting after each attempt at changing preferences and such is so that the next time you load FCP it loads the settings that you have saved/changed as native settings as opposed to changed settings, this does make a difference. You will know what I am talking about if you have experienced the Log & Capture Input problem for FCP 5.
    Let me know, I have some other suggestions if these don't work.

  • Very slow Slow rendering time in cs3

    My rendering time is extremely slow, for example it is taking over an hour to render a clip about 10 seconds long. the video settings are 50 fps, 1280x720, square pixels. I am running on a 32 bit vista OS with a 3gb ram memory and around 150gb free hard disk space . please help!

    Type: MPEG Movie
    File Size: 142.7 MB
    Image Size: 1280 x 720
    Pixel Depth: 1280
    Frame Rate: 50.00
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:01:26:13
    Average Data Rate: 1.7 MB / second
    Pixel Aspect Ratio: 1.0

  • Insanely slow rendering times, almost 60x longer | After Effects CS6

    I'm using Adobe After Effects CS6 and have been messing around with some intro making. This being said, the clips that I have in AE are 5-10 seconds long.
    My composition includes 2 lights, a camera, 3d text, a shockwave, a background (w/Magic Bullet Looks effect) and a song. All together, it is 5 seconds long. I render it out using AVI w/sound and it says it will take nearly 3 1/2 hours. I talked to a friend who is much better at intro making then me and includes many more layers and his renders take 3-15 minutes. It's an insane difference! I must be doing something wrong but I don't understand what it is.
    System Specs:
    Intel i5-3570
    EVGA GTX 770 4gb
    8gb Ram
    Western Digital 1TB (582 GB Free, this is where the file is being saved to.)
    Samsung Evo PRO 128gb SSD (This is where AE is located.)
    Windows 7
    Thanks for any help, it's very much appreciated.

    Before you go through all those resources just to goose the render speed, here's something you can do right away: turn off multiprocessing (render multiple frames simultaneously) and turn off any hardware acceleration.  With just 4 lousy gigs of memory, you can't use multiprocessing, and AE uses very little hardware acceleration.
    Then get yourself some more RAM: think about at least 16 gigs.
    And THEN look at those resources, or you'll really get lost in AE.

  • Painfully slow Rendering times

    I'm running into the frustrations of rendering titles made in LiveType that take forever and a day to complete - especially long credit scrolls. As I'm fairly new to this game I figure that some of you more experienced hands out there have come up with some tricks to shorten the ordeal.
    I'm using a dual 2.5 G5 but sitting right next to it is a dual 1.25 G4. I think that I once read something about it being possible to get the two of them to share the job. Who knows though, might have been just a bad dream.
    Any tips or info would be greatly appreciated!

    What graphic card do you have? Remember Motion is GPU based !
      Alberto

  • Will More RAM Slow Startup Times and Will it Speed Up Gaming?

    Hi,
    I was thinking of upgrading my Mid 2010 Macbook Pro's 4GB of Memory to 8GB (2X4GB).
    I have heard roumors that it will slow down startup times. Also, it sounds obvious, but will it help with gaming performance and reducing lag during games?
    Thanks. 

    "I use my Mac a lot in sleep mode so that is something to consider I suppose"
    Don't let that concern you---it's not that big a pause. RAM is your friend. Thomas Reed's advice to use Activity Monitor is your best helper.
    My older MBP has 2G RAM and can hold 6G, but AM has never told me I need more. Here what AM's RAM report looks like this morning:
    44KB for "outs" is nothing, and the computer has not been restarted in days. (A restart clears the "in/out" numbers, so you should only run this test after using the computer for a while since the last restart.) On my MBP and for my usage patterns, 2G is completely appropriate. However, I've seen similar posts here where someone had 4G like you but the "outs were 25-30 percent of the "ins." Those people need RAM.

  • Slow boot time after upgrading to Mavericks

    I use MBP mid 2010 it came with Snow Leopard 10.6.8. About 2 months ago I upgraded to 10.9.2 and ever since I'm experiencing slower boot time - in previous OS it started within less than 30sec and right now it starts around ~1min untill I see the desktop, following another minute loading a few applications I have on startup.
    So far I tried many solutions, including repairing permissions, I recently uninstalled Paragon NTFS (which helped with slow shutdown I experienced too, but not any longer), updating my software so it is the newest version, I also uninstalled SMCFanControl after which I did reset SMC and PRAM. But when I view boot logs I still have some errors with SMC..
    If someone could take a look at my logs and tell me what should I do more I will greatly appreciate.
    13.05.2014 19:59:20,000 bootlog[0]: BOOT_TIME 1400003960 0
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    13.05.2014 19:59:34,000 kernel[0]: Longterm timer threshold: 1000 ms
    13.05.2014 19:59:34,000 kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    13.05.2014 19:59:34,000 kernel[0]: vm_page_bootstrap: 1889879 free pages and 190889 wired pages
    13.05.2014 19:59:34,000 kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    13.05.2014 19:59:34,000 kernel[0]: zone leak detection enabled
    13.05.2014 19:59:34,000 kernel[0]: "vm_compressor_mode" is 4
    13.05.2014 19:59:34,000 kernel[0]: standard timeslicing quantum is 10000 us
    13.05.2014 19:59:34,000 kernel[0]: standard background quantum is 2500 us
    13.05.2014 19:59:34,000 kernel[0]: mig_table_max_displ = 74
    13.05.2014 19:59:34,000 kernel[0]: Notice - new kext jp.co.canon.bj.print.BJUSBLoad, v10.69 matches prelinked kext but can't determine if executables are the same (no UUIDs).
    13.05.2014 19:59:34,000 kernel[0]: Refusing new kext jp.co.canon.bj.print.BJUSBLoad, v10.69: already have prelinked v10.75.20.
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=5 Enabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    13.05.2014 19:59:34,000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    13.05.2014 19:59:34,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    13.05.2014 19:59:34,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    13.05.2014 19:59:34,000 kernel[0]: calling mpo_policy_init for Sandbox
    13.05.2014 19:59:34,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    13.05.2014 19:59:34,000 kernel[0]: calling mpo_policy_init for Quarantine
    13.05.2014 19:59:34,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    13.05.2014 19:59:34,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    13.05.2014 19:59:34,000 kernel[0]: The Regents of the University of California. All rights reserved.
    13.05.2014 19:59:34,000 kernel[0]: MAC Framework successfully initialized
    13.05.2014 19:59:34,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    13.05.2014 19:59:34,000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    13.05.2014 19:59:34,000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    13.05.2014 19:59:34,000 kernel[0]: ACPI: sleep states S3 S4 S5
    13.05.2014 19:59:34,000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0024
    13.05.2014 19:59:34,000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    13.05.2014 19:59:34,000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    13.05.2014 19:59:34,000 kernel[0]: [ PCI configuration begin ]
    13.05.2014 19:59:34,000 kernel[0]: console relocated to 0xf80030000
    13.05.2014 19:59:34,000 kernel[0]: [ PCI configuration end, bridges 7, devices 16 ]
    13.05.2014 19:59:34,000 kernel[0]: [ PCI configuration begin ]
    13.05.2014 19:59:34,000 kernel[0]: [ PCI configuration end, bridges 8, devices 22 ]
    13.05.2014 19:59:34,000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    13.05.2014 19:59:34,000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    13.05.2014 19:59:34,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    13.05.2014 19:59:34,000 kernel[0]: rooting via boot-uuid from /chosen: FB479244-794A-3EBC-9E4F-F0FA5BA63EFD
    13.05.2014 19:59:34,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    13.05.2014 19:59:34,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    13.05.2014 19:59:34,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    13.05.2014 19:59:34,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    13.05.2014 19:59:34,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    13.05.2014 19:59:34,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    13.05.2014 19:59:34,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500420AS Media/IOGUIDPartitionScheme/bez nazwy 1@2
    13.05.2014 19:59:34,000 kernel[0]: BSD root: disk0s2, major 1, minor 2
    13.05.2014 19:59:34,000 kernel[0]: BTCOEXIST off
    13.05.2014 19:59:34,000 kernel[0]: BRCM tunables:
    13.05.2014 19:59:34,000 kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    13.05.2014 19:59:34,000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID d83062fffee66136; max speed s800.
    13.05.2014 19:59:34,000 kernel[0]: hfs: mounted Mac OS X Snow Leopard on device root_device
    13.05.2014 19:59:22,180 com.apple.launchd[1]: *** launchd[1] has started up. ***
    13.05.2014 19:59:22,180 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    13.05.2014 19:59:33,505 com.apple.SecurityServer[14]: Session 100000 created
    13.05.2014 19:59:34,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    13.05.2014 19:59:34,000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    13.05.2014 19:59:39,045 hidd[50]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    13.05.2014 19:59:39,046 hidd[50]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    13.05.2014 19:59:39,000 kernel[0]: VM Swap Subsystem is ON
    13.05.2014 19:59:41,000 kernel[0]: Waiting for DSMOS...
    13.05.2014 19:59:43,056 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:43,242 kdc[47]: label: default
    13.05.2014 19:59:43,243 kdc[47]:     dbname: od:/Local/Default
    13.05.2014 19:59:43,243 kdc[47]:     mkey_file: /var/db/krb5kdc/m-key
    13.05.2014 19:59:43,243 kdc[47]:     acl_file: /var/db/krb5kdc/kadmind.acl
    13.05.2014 19:59:44,517 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:44,517 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:44,517 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:44,816 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:44,850 com.apple.usbmuxd[25]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    13.05.2014 19:59:44,876 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:46,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    13.05.2014 19:59:46,052 configd[17]: dhcp_arp_router: en1 SSID unavailable
    13.05.2014 19:59:46,066 configd[17]: setting hostname to "MBP.local"
    13.05.2014 19:59:46,075 configd[17]: network changed.
    13.05.2014 19:59:46,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    13.05.2014 19:59:48,000 kernel[0]: NVDAStartup: Official
    13.05.2014 19:59:48,000 kernel[0]: NVDANV50HAL loaded and registered
    13.05.2014 19:59:48,000 kernel[0]: init
    13.05.2014 19:59:48,000 kernel[0]: probe
    13.05.2014 19:59:48,000 kernel[0]: start
    13.05.2014 19:59:48,000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    13.05.2014 19:59:48,000 kernel[0]: com_protech_nosleepextension: setting state: 0, for mode: 0 (ac-mode)
    13.05.2014 19:59:48,000 kernel[0]: com_protech_nosleepextension: successfully started
    13.05.2014 19:59:48,000 kernel[0]: AGC: 3.4.35, HW version=1.9.22, flags:0, features:20600
    13.05.2014 19:59:48,000 kernel[0]: IOBluetoothUSBDFU::probe
    13.05.2014 19:59:48,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8218 FirmwareVersion - 0x0042
    13.05.2014 19:59:48,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xa000 ****
    13.05.2014 19:59:48,000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xa000 ****
    13.05.2014 19:59:48,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xa000
    13.05.2014 19:59:48,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    13.05.2014 19:59:48,000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    13.05.2014 19:59:48,000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    13.05.2014 19:59:48,000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    13.05.2014 19:59:48,000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    13.05.2014 19:59:48,000 kernel[0]: Previous Shutdown Cause: 0
    13.05.2014 19:59:48,000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    13.05.2014 19:59:48,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    13.05.2014 19:59:48,000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x9ec0 -- 0x2000 -- 0xa000 ****
    13.05.2014 19:59:48,000 kernel[0]: fNumVRAMBlocks is 4
    13.05.2014 19:59:48,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,2301,0de1,0300,c1e1,7800]
    13.05.2014 19:59:48,323 com.apple.SecurityServer[14]: Entering service
    13.05.2014 19:59:48,000 kernel[0]: IOMemoryDescriptor 0x29ccc140f991a899 prepared read only
    13.05.2014 19:59:48,000 kernel[0]: Backtrace 0xffffff80006b9e6e 0xffffff7f823f90e1 0xffffff7f82403fe2 0xffffff8000692fcf 0xffffff8000692b8f 0xffffff800068e769 0xffffff80006936e3
    13.05.2014 19:59:48,000 kernel[0]: Kernel Extensions in backtrace:
    13.05.2014 19:59:48,000 kernel[0]: com.apple.driver.AppleIntelHDGraphics(8.2.4)[84DE8845-D8E6-3C61-B457-1AC155AEF9 04]@0xffffff7f9f7db000->0xffffff7f9f89afff
    13.05.2014 19:59:48,000 kernel[0]: dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9dcba000
    13.05.2014 19:59:48,000 kernel[0]: dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e218000
    13.05.2014 19:59:48,000 kernel[0]: IOMemoryDescriptor 0x29ccc140fc22ce99 prepared read only
    13.05.2014 19:59:48,000 kernel[0]: Backtrace 0xffffff80006b9e6e 0xffffff7f823f92db 0xffffff7f82403fe2 0xffffff8000692fcf 0xffffff8000692b8f 0xffffff800068e769 0xffffff80006936e3
    13.05.2014 19:59:48,000 kernel[0]: Kernel Extensions in backtrace:
    13.05.2014 19:59:48,000 kernel[0]: com.apple.driver.AppleIntelHDGraphics(8.2.4)[84DE8845-D8E6-3C61-B457-1AC155AEF9 04]@0xffffff7f9f7db000->0xffffff7f9f89afff
    13.05.2014 19:59:48,000 kernel[0]: dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9dcba000
    13.05.2014 19:59:48,000 kernel[0]: dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e218000
    13.05.2014 19:59:48,562 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:48,596 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:48,608 mDNSResponder[40]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    13.05.2014 19:59:48,637 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:48,654 awacsd[63]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    13.05.2014 19:59:48,661 digest-service[75]: label: default
    13.05.2014 19:59:48,661 digest-service[75]:     dbname: od:/Local/Default
    13.05.2014 19:59:48,661 digest-service[75]:     mkey_file: /var/db/krb5kdc/m-key
    13.05.2014 19:59:48,661 digest-service[75]:     acl_file: /var/db/krb5kdc/kadmind.acl
    13.05.2014 19:59:48,662 awacsd[63]: InnerStore CopyAllZones: no info in Dynamic Store
    13.05.2014 19:59:48,663 digest-service[75]: digest-request: uid=0
    13.05.2014 19:59:48,669 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    13.05.2014 19:59:48,692 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    13.05.2014 19:59:48,705 mDNSResponder[40]: mDNS_SetSecretForDomain: ERROR: Could not convert shared secret from base64: domain . key mbp-net.
    13.05.2014 19:59:48,710 configd[17]: network changed: DNS*
    13.05.2014 19:59:48,711 mDNSResponder[40]: D2D_IPC: Loaded
    13.05.2014 19:59:48,711 mDNSResponder[40]: D2DInitialize succeeded
    13.05.2014 19:59:48,712 configd[17]: network changed.
    13.05.2014 19:59:48,716 digest-service[75]: digest-request: netr probe 0
    13.05.2014 19:59:48,718 digest-service[75]: digest-request: init request
    13.05.2014 19:59:48,718 mDNSResponder[40]:   4: Listening for incoming Unix Domain Socket client requests
    13.05.2014 19:59:48,727 mDNSResponder[40]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F94F3809560 MBP.local. (AAAA) that's already in the list
    13.05.2014 19:59:48,727 mDNSResponder[40]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F94F38099F0 7.1.1.B.C.8.E.F.F.F.2.6.D.6.E.7.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    13.05.2014 19:59:48,727 mDNSResponder[40]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F94F4001360 MBP.local. (Addr) that's already in the list
    13.05.2014 19:59:48,727 mDNSResponder[40]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F94F40017F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    13.05.2014 19:59:48,729 digest-service[75]: digest-request: init return domain: BUILTIN server: MBP indomain was: <NULL>
    13.05.2014 19:59:48,782 networkd[110]: networkd.110 built Aug 24 2013 22:08:46
    13.05.2014 19:59:48,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xa000 ****
    13.05.2014 19:59:48,834 kdc[47]: KDC started
    13.05.2014 19:59:48,857 apsd[65]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13.05.2014 19:59:48,867 systemkeychain[93]: done file: /var/run/systemkeychaincheck.done
    13.05.2014 19:59:48,878 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:48,890 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:48,000 kernel[0]: DSMOS has arrived
    13.05.2014 19:59:48,937 loginwindow[43]: Login Window Application Started
    13.05.2014 19:59:49,001 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:49,009 WindowServer[116]: Server is starting up
    13.05.2014 19:59:49,000 kernel[0]: createVirtIf(): ifRole = 1
    13.05.2014 19:59:49,000 kernel[0]: in func createVirtualInterface ifRole = 1
    13.05.2014 19:59:49,000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
    13.05.2014 19:59:49,000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    13.05.2014 19:59:49,000 kernel[0]: Created virtif 0xffffff803340ac00 p2p0
    13.05.2014 19:59:49,082 airportd[67]: airportdProcessDLILEvent: en1 attached (up)
    13.05.2014 19:59:49,086 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:49,318 mds[39]: (Normal) FMW: FMW 0 0
    13.05.2014 19:59:49,000 kernel[0]: en1: setting diversity to: -1
    13.05.2014 19:59:49,000 kernel[0]: en1: Error configuring antenna diversity (index = -1).
    13.05.2014 19:59:49,000 kernel[0]: en1: setting tx antenna: -1
    13.05.2014 19:59:49,322 locationd[45]: NBB-Could not get UDID for stable refill timing, falling back on random
    13.05.2014 19:59:49,000 kernel[0]: IO80211ScanManager::startScanMultiple: Scan request received from 'airportd' (pid 67) (16 SSIDs, 0 BSSIDs).
    13.05.2014 19:59:49,000 kernel[0]: IO80211ScanManager::startScanMultiple: Initiating scan.
    13.05.2014 19:59:49,447 locationd[45]: Location icon should now be in state 'Inactive'
    13.05.2014 19:59:49,599 com.apple.InternetSharing[48]: *** no interface for service
    13.05.2014 19:59:49,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 19:59:49,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 19:59:49,000 kernel[0]: [BluetoothHCIWriteClassOfDevice] fails because POWER IS OFF
    13.05.2014 19:59:49,938 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:50,000 kernel[0]: IO80211ScanManager::scanDone: Scheduling cache purge timer in 30 seconds.
    13.05.2014 19:59:50,000 kernel[0]: IO80211ScanManager::getScanResult: All scan results returned for 'airportd' (pid 67).
    13.05.2014 19:59:50,000 kernel[0]: IO80211ScanManager::startScan: Broadcast scan request received from 'locationd' (pid 45) ().
    13.05.2014 19:59:50,000 kernel[0]: IO80211ScanManager::getScanResult: All scan results returned for 'locationd' (pid 45).
    13.05.2014 19:59:54,558 configd[17]: network changed: v4(en0+:178.235.243.207) DNS+ Proxy+ SMB
    13.05.2014 19:59:54,849 stackshot[28]: Timed out waiting for IOKit to finish matching.
    13.05.2014 19:59:56,117 ntpd[121]: proto: precision = 1.000 usec
    13.05.2014 19:59:59,096 configd[17]: setting hostname to "[removed from log]"
    13.05.2014 19:59:59,139 xpcd[133]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:59,230 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 19:59:59,319 apsd[65]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13.05.2014 19:59:59,406 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,427 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,558 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,566 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,683 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,691 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,808 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,816 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,933 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 19:59:59,941 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,059 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,068 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
    13.05.2014 20:00:00,000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice0a29
    13.05.2014 20:00:00,000 kernel[0]: [AGPM Controller] build GPUDict by Vendor8086Device0046
    13.05.2014 20:00:00,202 WindowServer[116]: Session 256 retained (2 references)
    13.05.2014 20:00:00,203 WindowServer[116]: Session 256 released (1 references)
    13.05.2014 20:00:00,000 kernel[0]: IO80211ScanManager::startScanMultiple: Scan request received from 'airportd' (pid 67) (16 SSIDs, 0 BSSIDs).
    13.05.2014 20:00:00,000 kernel[0]: IO80211ScanManager::startScanMultiple: Initiating scan.
    13.05.2014 20:00:00,228 WindowServer[116]: Session 256 retained (2 references)
    13.05.2014 20:00:00,233 WindowServer[116]: init_page_flip: page flip mode is on
    13.05.2014 20:00:00,363 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,371 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,509 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,518 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,662 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,672 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,812 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,819 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,921 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:00,928 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:01,396 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:01,411 com.apple.kextd[12]: Can't create kext cache under / - owner not root.
    13.05.2014 20:00:01,667 WindowServer[116]: Found 60 modes for display 0x00000000 [51, 9]
    13.05.2014 20:00:01,671 WindowServer[116]: Found 1 modes for display 0x00000000 [1, 0]
    13.05.2014 20:00:01,672 WindowServer[116]: Found 1 modes for display 0x00000000 [1, 0]
    13.05.2014 20:00:01,686 WindowServer[116]: mux_initialize: Mode is dynamic
    13.05.2014 20:00:01,689 WindowServer[116]: Found 60 modes for display 0x00000000 [51, 9]
    13.05.2014 20:00:01,697 WindowServer[116]: Found 1 modes for display 0x00000000 [1, 0]
    13.05.2014 20:00:01,745 WindowServer[116]: WSMachineUsesNewStyleMirroring: false
    13.05.2014 20:00:01,747 WindowServer[116]: Display 0x042733c1: GL mask 0x3; bounds (0, 0)[1920 x 1200], 60 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ccf, S/N 0, Unit 1, Rotation 0
    UUID 0x7dfbf755a87b7c3df679051e724d6c91
    13.05.2014 20:00:01,747 WindowServer[116]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    13.05.2014 20:00:01,748 WindowServer[116]: WSSetWindowTransform: Singular matrix
    13.05.2014 20:00:01,751 WindowServer[116]: Display 0x042733c1: GL mask 0x3; bounds (0, 0)[1920 x 1200], 60 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ccf, S/N 0, Unit 1, Rotation 0
    UUID 0x7dfbf755a87b7c3df679051e724d6c91
    13.05.2014 20:00:01,751 WindowServer[116]: Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    13.05.2014 20:00:01,751 WindowServer[116]: CGXPerformInitialDisplayConfiguration
    13.05.2014 20:00:01,752 WindowServer[116]:   Display 0x042733c1: Unit 1; Alias(1, 0x3); Vendor 0x610 Model 0x9ccf S/N 0 Dimensions 14.45 x 9.06; online enabled built-in, Bounds (0,0)[1920 x 1200], Rotation 0, Resolution 1
    13.05.2014 20:00:01,752 WindowServer[116]:   Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
    13.05.2014 20:00:01,752 WindowServer[116]: CGXMuxBoot: Boot normal
    13.05.2014 20:00:01,834 WindowServer[116]: GLCompositor: GL renderer id 0x01024300, GL mask 0x00000001, accelerator 0x00004a2b, unit 0, caps QEX|MIPMAP, vram 288 MB
    13.05.2014 20:00:01,834 WindowServer[116]: GLCompositor: GL renderer id 0x01024300, GL mask 0x00000001, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    13.05.2014 20:00:01,834 WindowServer[116]: GLCompositor: GL renderer id 0x01022612, GL mask 0x00000006, accelerator 0x00004693, unit 1, caps QEX|MIPMAP, vram 512 MB
    13.05.2014 20:00:01,846 WindowServer[116]: GLCompositor: GL renderer id 0x01022612, GL mask 0x00000006, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    13.05.2014 20:00:01,846 WindowServer[116]: GLCompositor enabled for tile size [256 x 256]
    13.05.2014 20:00:01,846 WindowServer[116]: CGXGLInitMipMap: mip map mode is on
    13.05.2014 20:00:01,867 loginwindow[43]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    13.05.2014 20:00:02,000 kernel[0]: IO80211ScanManager::getScanResult: All scan results returned for 'airportd' (pid 67).
    13.05.2014 20:00:02,000 kernel[0]: IO80211ScanManager::startScan: Broadcast scan request received from 'airportd' (pid 67) ().
    13.05.2014 20:00:02,000 kernel[0]: IO80211ScanManager::startScan: Initiating scan.
    13.05.2014 20:00:02,912 WindowServer[116]: Display 0x042733c1: Unit 1; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    13.05.2014 20:00:02,933 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:02,947 launchctl[178]: com.apple.findmymacmessenger: Already loaded
    13.05.2014 20:00:02,987 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:03,019 com.apple.SecurityServer[14]: Session 100005 created
    13.05.2014 20:00:03,126 loginwindow[43]: Setting the initial value of the magsave brightness level 1
    13.05.2014 20:00:03,145 UserEventAgent[181]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    13.05.2014 20:00:03,166 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:03,233 loginwindow[43]: Login Window Started Security Agent
    13.05.2014 20:00:03,380 SecurityAgent[189]: This is the first run
    13.05.2014 20:00:03,380 SecurityAgent[189]: MacBuddy was run = 0
    13.05.2014 20:00:03,000 kernel[0]: NTFS driver 3.11 [Flags: R/W].
    13.05.2014 20:00:03,451 WindowServer[116]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fb1c2d02340) - enabling OpenGL
    13.05.2014 20:00:03,454 SecurityAgent[189]: User info context values set for seba
    13.05.2014 20:00:03,749 WindowServer[116]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    13.05.2014 20:00:03,801 WindowServer[116]: Display 0x042733c1: Unit 1; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    13.05.2014 20:00:03,819 WindowServer[116]: Display 0x042733c1: Unit 1; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    13.05.2014 20:00:03,823 com.apple.launchd[1]: System: Could not find requested session: Aqua
    13.05.2014 20:00:03,824 TabletDriver[186]: com.wacom.WacomTouchDriver.105984: Invalid argument
    13.05.2014 20:00:03,829 WindowServer[116]: Received display connect changed for display 0x42733c1
    13.05.2014 20:00:03,851 WindowServer[116]: Found 20 modes for display 0x042733c1 [17, 3]
    13.05.2014 20:00:03,880 WindowServer[116]: CGXMuxAcknowledge: Posting glitchless acknowledge
    13.05.2014 20:00:03,934 WindowServer[116]: Received display connect changed for display 0x42733c1
    13.05.2014 20:00:03,934 WindowServer[116]: Found 1 modes for display 0x042733c1 [1, 0]
    13.05.2014 20:00:03,935 WindowServer[116]: Received display connect changed for display 0x3f003e
    13.05.2014 20:00:03,936 WindowServer[116]: Found 1 modes for display 0x003f003e [1, 0]
    13.05.2014 20:00:04,027 loginwindow[43]: Login Window - Returned from Security Agent
    13.05.2014 20:00:04,103 loginwindow[43]: USER_PROCESS: 43 console
    13.05.2014 20:00:04,108 awacsd[63]: Exiting
    13.05.2014 20:00:04,111 TabletDriver[186]: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/WacomTouchDriver.app
    13.05.2014 20:00:04,251 com.apple.launchd[1]: System: Could not find requested session: Aqua
    13.05.2014 20:00:04,251 TabletDriver[186]: com.wacom.TabletDriver.49312: Invalid argument
    13.05.2014 20:00:04,000 kernel[0]: IO80211ScanManager::getScanResult: All scan results returned for 'airportd' (pid 67).
    13.05.2014 20:00:04,000 kernel[0]: IO80211ScanManager::startScan: Broadcast scan request received from 'locationd' (pid 45) ().
    13.05.2014 20:00:04,000 kernel[0]: IO80211ScanManager::getScanResult: All scan results returned for 'locationd' (pid 45).
    13.05.2014 20:00:05,000 kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
    13.05.2014 20:00:05,000 kernel[0]: wlc_iovar_setint(auth) returned 0
    13.05.2014 20:00:05,000 kernel[0]: wlc_iovar_setint(wpa_cap=0x0) returned 0
    13.05.2014 20:00:05,000 kernel[0]: wlc_iovar_setint(wsec=0x4) returned 0
    13.05.2014 20:00:05,000 kernel[0]: wlc_iovar_setint(wpa_auth=0x80) returned 0
    13.05.2014 20:00:05,000 kernel[0]: AppleKeyStore:Sending lock change 0
    13.05.2014 20:00:05,153 com.apple.launchd.peruser.501[197]: Background: Aqua: Registering new GUI session.
    13.05.2014 20:00:05,157 com.apple.launchd[1]: (com.wacom.WacomTouchDriver.105984[196]) Exited with code: 255
    13.05.2014 20:00:05,166 com.apple.launchd[1]: (com.wacom.wacomtablet[186]) Exited with code: 255
    13.05.2014 20:00:05,185 com.apple.launchd.peruser.501[197]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
    13.05.2014 20:00:05,189 com.apple.launchd.peruser.501[197]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    13.05.2014 20:00:05,201 launchctl[202]: com.apple.pluginkit.pkd: Already loaded
    13.05.2014 20:00:05,201 launchctl[202]: com.apple.sbd: Already loaded
    13.05.2014 20:00:05,228 distnoted[204]: # distnote server agent  absolute time: 45.267061779   civil time: Tue May 13 20:00:05 2014   pid: 204 uid: 501  root: no
    13.05.2014 20:00:05,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    13.05.2014 20:00:05,000 kernel[0]: AirPort: Link Up on en1
    13.05.2014 20:00:05,000 kernel[0]: en1: BSSID changed to 58:b0:35:65:a4:3e
    13.05.2014 20:00:05,000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    13.05.2014 20:00:05,000 kernel[0]: AirPort: Link Down on en1. Reason 3 (Deauthenticated because station leaving).
    13.05.2014 20:00:05,000 kernel[0]: en1: BSSID changed to 58:b0:35:65:a4:3e
    13.05.2014 20:00:05,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    13.05.2014 20:00:05,000 kernel[0]: AirPort: Link Up on en1
    13.05.2014 20:00:05,000 kernel[0]: en1: BSSID changed to 58:b0:35:65:a4:3e
    13.05.2014 20:00:05,000 kernel[0]: AirPort_Brcm43xx::getKEY_RSC: Requesting RSC for index 1.
    13.05.2014 20:00:05,000 kernel[0]: wlc_ioctl(WLC_GET_KEY_SEQ) returned 0
    13.05.2014 20:00:05,279 com.apple.InternetSharing[48]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
    13.05.2014 20:00:05,280 com.apple.InternetSharing[48]: BCAST is ready [en0, mtu=1500, 0 DNSv6 server(s)]
    13.05.2014 20:00:05,000 kernel[0]: en1: promiscuous mode enable succeeded
    13.05.2014 20:00:05,280 com.apple.InternetSharing[48]: removed addr=fe80::5ab0:35ff:fe65:a43e on en1
    13.05.2014 20:00:05,281 com.apple.InternetSharing[48]: added addr=192.168.2.1 mask=255.255.255.0 on bridge100
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIWriteClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,300 com.apple.InternetSharing[48]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.2/24 on bridge100 mtu=1500 <---> en0 mtu=1500] max-mss=1460
    13.05.2014 20:00:05,300 com.apple.InternetSharing[48]:   dns: 192.168.2.1
    13.05.2014 20:00:05,301 com.apple.InternetSharing[48]: started dns proxy
    13.05.2014 20:00:05,303 com.apple.InternetSharing[48]: dns proxy successfully enabled
    13.05.2014 20:00:05,303 mDNSResponder[40]: SetupDNSProxySkts: 25, 26, 27, 28
    13.05.2014 20:00:05,311 com.apple.InternetSharing[48]: started "natpmpd"
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIWriteClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIReadClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,000 kernel[0]: [BluetoothHCIWriteClassOfDevice] fails because POWER IS OFF
    13.05.2014 20:00:05,338 airportd[67]: _doAutoJoin: Already associated to “MBPs”. Bailing on auto-join.
    13.05.2014 20:00:06,026 xpcd[218]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:06,077 xpcd[218]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:06,248 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
    13.05.2014 20:00:06,249 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
    13.05.2014 20:00:06,250 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
    13.05.2014 20:00:06,250 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    13.05.2014 20:00:06,250 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
    13.05.2014 20:00:06,250 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
    13.05.2014 20:00:06,250 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
    13.05.2014 20:00:06,250 com.apple.audio.DriverHelper[219]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
    13.05.2014 20:00:06,287 com.apple.audio.DriverHelper[219]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    13.05.2014 20:00:06,287 com.apple.audio.DriverHelper[219]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
    13.05.2014 20:00:06,287 com.apple.audio.DriverHelper[219]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    13.05.2014 20:00:06,588 WindowServer[116]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    13.05.2014 20:00:06,672 sharingd[227]: Starting Up...
    13.05.2014 20:00:06,780 WindowServer[116]: Display 0x042733c1: Unit 1; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    13.05.2014 20:00:06,791 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:06,796 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:06,808 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:06,899 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,109 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:07,109 configd[17]: DHCP en1: INIT-REBOOT transmit failed
    13.05.2014 20:00:07,654 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,671 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,819 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,823 com.apple.SecurityServer[14]: Session 100006 created
    13.05.2014 20:00:07,849 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,898 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,924 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:07,964 accountsd[265]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    13.05.2014 20:00:07,986 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,005 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,012 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,018 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,123 UserEventAgent[203]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    13.05.2014 20:00:08,141 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,178 xpcproxy[267]: assertion failed: 13C1021: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    13.05.2014 20:00:08,276 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,289 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=272[USBOverdriveHelp] final status 0x0, allowing (remove VALID) page
    13.05.2014 20:00:08,388 SocialPushAgent[239]: ApplePushService: APSConnection being used without a delegate queue
    13.05.2014 20:00:08,550 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,565 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,577 com.apple.SecurityServer[14]: Session 100009 created
    13.05.2014 20:00:08,661 mDNSResponder[40]: mDNS_Execute: SendResponses didn't send all its responses; will try again in one second
    13.05.2014 20:00:08,718 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,780 mDNSResponder[40]: mDNS_Execute: SendResponses didn't send all its responses; will try again in one second
    13.05.2014 20:00:08,790 com.apple.launchd.peruser.501[197]: (com.apple.mrt.uiagent[244]) Exited with code: 255
    13.05.2014 20:00:08,829 TotalFinder[273]: agent v1.5.35 started (TotalFinder)
    13.05.2014 20:00:08,835 TotalFinder[273]: requesting injection into com.apple.finder[216]
    13.05.2014 20:00:08,915 xpcproxy[276]: assertion failed: 13C1021: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    13.05.2014 20:00:08,942 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,952 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:08,985 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:09,048 WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
    13.05.2014 20:00:09,049 WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    13.05.2014 20:00:09,476 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:09,476 configd[17]: DHCP en1: INIT-REBOOT transmit failed
    13.05.2014 20:00:09,670 apsd[65]: Unrecognized leaf certificate
    13.05.2014 20:00:09,844 mDNSResponder[40]: mDNS_Execute: SendResponses didn't send all its responses; will try again in one second
    13.05.2014 20:00:10,061 WindowServer[116]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    13.05.2014 20:00:10,543 WindowServer[116]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.48 seconds (server forcibly re-enabled them after 1.00 seconds)
    13.05.2014 20:00:10,647 BetterTouchTool[271]: init
    13.05.2014 20:00:12,737 SystemUIServer[215]: Cannot find executable for CFBundle 0x7fde21c1c490 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
    13.05.2014 20:00:12,761 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:12,770 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:12,770 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:12,778 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:13,344 SystemUIServer[215]: Cannot find executable for CFBundle 0x7fde21c34520 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
    13.05.2014 20:00:13,348 SystemUIServer[215]: Cannot find executable for CFBundle 0x7fde21eaab80 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
    13.05.2014 20:00:13,700 configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
    13.05.2014 20:00:13,700 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:13,700 configd[17]: DHCP en1: INIT transmit failed
    13.05.2014 20:00:13,874 com.apple.IconServicesAgent[282]: IconServicesAgent launched.
    13.05.2014 20:00:14,230 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:14,345 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:14,726 WindowServer[116]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    13.05.2014 20:00:15,210 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:15,210 configd[17]: DHCP en1: INIT transmit failed
    13.05.2014 20:00:15,981 WindowServer[116]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 2.26 seconds (server forcibly re-enabled them after 1.00 seconds)
    13.05.2014 20:00:16,585 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:17,049 secd[268]:  securityd_xpc_dictionary_handler Gmail Notifr[274] copy_matching The operation couldn’t be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements)
    13.05.2014 20:00:17,304 TabletDriver[255]: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/WacomTouchDriver.app
    13.05.2014 20:00:17,349 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:17,349 configd[17]: DHCP en1: INIT transmit failed
    13.05.2014 20:00:17,967 Gmail Notifr[274]:  SecOSStatusWith error:[-34018] The operation couldn’t be completed. (OSStatus error -34018 - Remote error : The operation couldn‚Äôt be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements))
    13.05.2014 20:00:17,988 secd[268]:  securityd_xpc_dictionary_handler Gmail Notifr[274] copy_matching The operation couldn’t be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements)
    13.05.2014 20:00:17,988 Gmail Notifr[274]:  SecOSStatusWith error:[-34018] The operation couldn’t be completed. (OSStatus error -34018 - Remote error : The operation couldn‚Äôt be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements))
    13.05.2014 20:00:18,458 bootpd[209]: server name [removed from log]
    13.05.2014 20:00:18,459 bootpd[209]: interface en0: ip 178.235.243.207 mask 255.255.248.0
    13.05.2014 20:00:18,459 bootpd[209]: interface bridge100: ip 192.168.2.1 mask 255.255.255.0
    13.05.2014 20:00:18,460 mds[39]: (Normal) Volume: volume:0x7ff291855200 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/BOOTCAMP
    13.05.2014 20:00:18,468 SystemUIServer[215]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    13.05.2014 20:00:18,468 SystemUIServer[215]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    13.05.2014 20:00:18,611 bootpd[209]: DHCP REQUEST [bridge100]: 1,a4:99:47:25:53:d4 <android-de3492c8d08a2ab5>
    13.05.2014 20:00:19,126 bootpd[209]: ACK sent android-de3492c8d08a2ab5 192.168.2.17 pktsize 300
    13.05.2014 20:00:19,127 Gmail Notifr[274]: Warning: NSBundle NSBundle </System/Library/PrivateFrameworks/XQuery.framework> (loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    13.05.2014 20:00:19,399 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:20,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
    13.05.2014 20:00:20,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BC3V (kSMCKeyNotFound)
    13.05.2014 20:00:20,000 kernel[0]: IO80211ScanManager::cachePurge: clearEntries[0] Firing!
    13.05.2014 20:00:20,000 kernel[0]: IO80211ScanManager::cachePurge: Rescheduling in 14 seconds.
    13.05.2014 20:00:21,481 TabletDriver[255]: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app
    13.05.2014 20:00:21,531 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:21,641 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:21,641 configd[17]: DHCP en1: INIT transmit failed
    13.05.2014 20:00:21,886 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:23,935 AirPlayUIAgent[293]: 2014-05-13 08:00:23.934385 PM [AirPlayUIAgent] Changed PIN pairing: no
    13.05.2014 20:00:24,397 xpcd[297]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:24,430 AirPlayUIAgent[293]: 2014-05-13 08:00:24.429731 PM [AirPlayUIAgent] Changed PIN pairing: no
    13.05.2014 20:00:24,542 locationd[45]: wifi scan failed with error: @
    13.05.2014 20:00:24,618 locationd[45]: wifi scan failed with error: @
    13.05.2014 20:00:25,112 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:25,378 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:27,131 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:27,143 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:27,712 GrowlLauncher[236]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
    13.05.2014 20:00:29,044 syncdefaultsd[235]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
    13.05.2014 20:00:29,686 configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
    13.05.2014 20:00:29,686 configd[17]: DHCP en1: INIT transmit failed
    13.05.2014 20:00:30,260 storeagent[296]: multibyte ASN1 identifiers are  not supported.
    13.05.2014 20:00:30,771 xpcd[69]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:30,771 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:00:31,371 parentalcontrolsd[299]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    13.05.2014 20:00:31,549 configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
    13.05.2014 20:00:31,557 configd[17]: network changed: v4(en0:178.235.243.207) DNS Proxy SMB
    13.05.2014 20:00:34,000 kernel[0]: IO80211ScanManager::cachePurge: clearEntries[0] Firing!
    13.05.2014 20:00:34,000 kernel[0]: IO80211ScanManager::cachePurge: NOT Rescheduling.
    13.05.2014 20:00:44,530 storeagent[296]: multibyte ASN1 identifiers are  not supported.
    13.05.2014 20:00:44,534 UserEventAgent[203]: multibyte ASN1 identifiers are  not supported.
    13.05.2014 20:00:45,818 xpcd[226]: Warning: NSBundle NSBundle </System/Library/PrivateFrameworks/Mangrove.framework> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    13.05.2014 20:00:46,629 Growl[298]: Using your own bundle identifier as an NSUserDefaults suite name does not make sense and will not work. Break on _NSUserDefaults_Log_Nonsensical_Suites to find this
    13.05.2014 20:00:46,636 Growl[298]: publishing
    13.05.2014 20:00:48,328 WindowServer[116]: disable_update_timeout: UI updates were forcibly disabled by application "Canon IJ Network Scanner Select" for over 1.00 seconds. Server has re-enabled them.
    13.05.2014 20:00:48,678 Growl[298]: Setup timer, this should only happen once
    13.05.2014 20:00:48,680 Growl[298]: Next image check no earlier than 24 hours from 2014-05-12 21:59:00 +0000
    13.05.2014 20:01:01,751 com.apple.time[203]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    13.05.2014 20:01:01,764 com.apple.time[203]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    13.05.2014 20:01:02,329 WindowServer[116]: disable_update_likely_unbalanced: UI updates still disabled by application "Canon IJ Network Scanner Select" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    13.05.2014 20:01:02,333 com.apple.dock.extra[284]: <NSXPCConnection: 0x7fa648624d80>: received an undecodable message (no exported object to receive message). Dropping message.
    13.05.2014 20:01:02,397 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:01:02,946 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:01:03,032 com.apple.SecurityServer[14]: Session 100012 created
    13.05.2014 20:01:03,232 WindowServer[116]: common_reenable_update: UI updates were finally reenabled by application "Canon IJ Network Scanner Select" after 15.90 seconds (server forcibly re-enabled them after 1.00 seconds)
    13.05.2014 20:01:03,280 Canon IJ Network Scanner Selector2[270]: void CGSUpdateManager::log() const: conn 0x137a3: spurious update.
    13.05.2014 20:01:03,295 com.apple.time[203]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    13.05.2014 20:01:03,333 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:01:03,504 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:01:03,533 xpcd[226]: Info.plist does not contain an XPCService dictionary: /System/Library/Frameworks/Security.framework/XPCServices/SecurityAgent.xpc
    13.05.2014 20:01:03,579 com.apple.NotesMigratorService[322]: Joined Aqua audit session
    13.05.2014 20:01:03,703 com.apple.internetaccounts[276]: An instance 0x7fa07b80e0b0 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on

    A slow boot time can be caused by login items.
    User Login Items:
        Flux
        NoSleep
        ClipMenu
        Canon IJ Network Scanner Selector2
        BetterTouchTool
        USBOverdriveHelper
        TotalFinder
        Gmail Notifr
    Open System Preferences > Users & Groups > Login Items
    Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot.

  • Which is better 7200 RPM HDD or SSD for laptop upgrade to boost rendering times?

    This is my current setup
    RAM: 8GB
    Processor: Intel Core i7-3630QM
    GPU: Nvidia Geforce GT 635M - 2GB
    OS: Windows 8.1
    Storage: 1TB 5400 RPM HDD
    I am going to start editing raw footage in premiere pro. I would like to update my laptop to help with rendering times. Tommorow I will be installing 16GB of RAM. Which will be better for storage a 7200rpm HDD or and SDD drive? I am seeing conflicting views on the web. I figured that this will be the best place to ask, since I am upgrading primarily for this program. I appreciate the help.

    No clue what would be conflicting between the two. Both the internal operating speed of data handling and the i/o to the system over any sustained period of time are so vastly higher for a modern and large-ish SSD compared to any HDD that it is a total no-brainer. In fact, on the tweaker's page, they point out that for a really monster system, set up RAID's of multiple SSD's. Lacking that, RAID's of four or five linked fast LARGE HDD's which will be noticeably slower than the SSD option but typically better than single HDD's, even using one for each part of the process.
    For both the processing of data to present a view on the monitor during editing and during rendering, it's not the "burst" speed numbers that count ... it's the sustained long-term data transfer counts that matter. Which are different from what many think they are ...
    neil

  • T400s and T500 experiencing slow response time accessing certain websites from within our network

    Hello there.... we have some Lenovo T400s running Windows 7 and T500 running WinXP Pro that are experiencing slow response time when trying to access certain website from within our company network (particularly this global crossing Web meeting, google maps): https://core1.callinfo.com/interface/guest.jsp?host=globalcrossing ... it takes 10-15 minutes before it loads the meeting login screen and same response time for google maps to respond as well... the thing is, other Lenovo T400s, T61, and other HP desktop machines that are connected to the same network in our company does not experience this slow response time... HOWEVER, when these problematic T400s / T500 laptops are connected to external network (e.g. home DSL, hotel DSL/Cable modem) the problem goes away.   Our NETWORK ran tests to monitor traffic to the websites from our company's network but seem to connect just fine... just wondering if anybody out there experienced the same problem and know of a solution.  By the way, the two newer T400s that are experiencing the slow response time have the following BIOS version 1.11 (6HET26WW) and BIOS version 1.09 (6HET24WW).  Then a T400s that is also connected to the same network but not experiencing the problem has a BIOS version of 1.02 (6HET17WW - running WinXP Pro).   NOTE: We also connected a Linksys USB wireless adapter to connect to our wireless network in the company but same problem - and problem occurs even when connected via network cable.  Your feedback will be greatly appreciated.

    Network World posted an article about a free response time monitoring tool that would be worth checking out

  • Slow boot time (Video included)

    It takes 44 seconds from first hitting the power button to my desktop appearing, it's not until around 22 seconds that anything even appears on my screen and the POST process starts so I don't think this is Windows related etc? I have tried with and without RAPID mode on my SSD and strangely it's actually 2secs quicker with RAPID OFF, either way 44 seconds is extremely slow for Windows 8 on an SSD?!
    Worth noting that I had the exact same slow boot times while on my previous non EVO SSD and Windows 7 on this exact PC, have now just updated to Windows 8.1 on a brand new SSD but still have slow boot so guessing its something BIOS or MOBO related?
    I've posted a video in the hope that maybe the LED indicator on the mobo might help someone point me in the right direction?
    Video:
    PLEASE VIEW IN 1080P AND FULLSCREEN SO YOU HAVE A CHANCE OF SEEING THE LED INDICATOR.
    Spec:
    OS: Windows 8.1
    Mobo: MSI FXA990-GD80 (BIOS is up to date)
    CPU: AMD FX8350 (8-Core) 4.3GHz
    GPU: EVGA 780 Classified 3GB (Latest Drivers)
    RAM: 16GB Corsair 1600MHz DDR3
    PSU: Corsair TX750
    SSD: Samsung 840 EVO 250GB (OS is here)
    SSD: Samsung 840 120GB
    BIOS Boot settings:
    BIOS Windows 8 Settings:
    Windows Start-up List:
    External devices connected to PC:
    1x WD Passport External HDD
    1x USB 3.0 Seasonic 2TB External HDD
    1x Razor Nostromo Gaming Number Pad
    1x Microsoft 360 Controller
    1x Logitech G500 Gaming Mouse
    1x USB Keyboard
    MSI Fast Boot is Disabled as it caused problems when I had dual boot and I've yet to reinstall it yet as it made very little difference to boot times but did cause me problems as I had an issue before where Windows wouldn't load and Fast Boot was stopping me getting to my BIOS as it disables the 'hit del to enter BIOS', so for now I feel safer with it off.
    I will of course unplug all but the mouse and keyboard and time it again, but I do think I've already tried that in the past.

    Quote from: RipGroove on 30-December-13, 20:46:21
    It takes 44 seconds from first hitting the power button to my desktop appearing, it's not until around 22 seconds that anything even appears on my screen and the POST process starts so I don't think this is Windows related etc? I have tried with and without RAPID mode on my SSD and strangely it's actually 2secs quicker with RAPID OFF, either way 44 seconds is extremely slow for Windows 8 on an SSD?!
    Worth noting that I had the exact same slow boot times while on my previous non EVO SSD and Windows 7 on this exact PC, have now just updated to Windows 8.1 on a brand new SSD but still have slow boot so guessing its something BIOS or MOBO related?
    I've posted a video in the hope that maybe the LED indicator on the mobo might help someone point me in the right direction?
    Video:
    PLEASE VIEW IN 1080P AND FULLSCREEN SO YOU HAVE A CHANCE OF SEEING THE LED INDICATOR.
    Spec:
    OS: Windows 8.1
    Mobo: MSI FXA990-GD80 (BIOS is up to date)
    CPU: AMD FX8350 (8-Core) 4.3GHz
    GPU: EVGA 780 Classified 3GB (Latest Drivers)
    RAM: 16GB Corsair 1600MHz DDR3
    PSU: Corsair TX750
    SSD: Samsung 840 EVO 250GB (OS is here)
    SSD: Samsung 840 120GB
    BIOS Boot settings:
    BIOS Windows 8 Settings:
    Windows Start-up List:
    External devices connected to PC:
    1x WD Passport External HDD
    1x USB 3.0 Seasonic 2TB External HDD
    1x Razor Nostromo Gaming Number Pad
    1x Microsoft 360 Controller
    1x Logitech G500 Gaming Mouse
    1x USB Keyboard
    MSI Fast Boot is Disabled as it caused problems when I had dual boot and I've yet to reinstall it yet as it made very little difference to boot times but did cause me problems as I had an issue before where Windows wouldn't load and Fast Boot was stopping me getting to my BIOS as it disables the 'hit del to enter BIOS', so for now I feel safer with it off.
    I will of course unplug all but the mouse and keyboard and time it again, but I do think I've already tried that in the past.
    My system takes ~15 secs from Power button to desktop display (I'm booting from a somewhat slow Seagate Sata 2 320GB drive)--of course stuff is still loading at this point in the background.  My Windows 8.1 Start up-sequence boot timer says ~12 secs--but I don't think that is right and think it's cheating a wee bit...  Anyway, just looking at this stuff here's what stands out to me:
    *You don't need the CD/DVD device ahead of your Windows boot drive in the boot order.  I only do that when I specifically have to boot from DVD for some reason,  which isn't that often.  By knocking back the DVD drive in the boot order it shaves maybe a couple of secs since there's no check for bootable DVD disk done before the boot is handed off to your really fast boot drive--and hey, if you *do* have a DVD disk just sitting in there that you don't want to boot from (this is my situation far more than I need to boot from the DVD drive)--that can take a couple more seconds, I think.  Where it really costs you boot time is when you have a bootable disk in the DVD drive that you don't want to boot from...  The "....hit any key to boot from DVD" will maybe 8-10 seconds to your boot.  Best policy: Don't put the DVD drive first in the boot order.  This one is minor, though,  compared to the next one:
    *Your list of start-up programs is roughly 3x longer than mine...  I can see there are several programs running in your boot sequence that are entirely unnecessary in getting your machine up and properly booted--and every one of those unnecessary proggy's takes time to load through--during the boot process.  Most of those programs will easily run after boot when you need them to run--they just don't need to be run at boot-up.  Try disabling a bunch of them selectively until you get the reduction in boot time you're looking for.  I just checked my boot sequence in the 8.1 task manager...I have 11 programs in the sequence BUT...8 (eight) of them are disabled...!  They have nothing material to do with my boot so why should I let them clog up the boot process? I think you can make big time gains there. Another waste of boot time is stuff like QT task--you can update manually whenever you want after you boot--doesn't need to clog up the boot process, imo. You'll be surprised by how much you can excise from that program list without noticing it except in faster boots. (I don't run MSI fast boot, either.)
    You are certainly right, though--your boot shouldn't be taking nearly so long.  Fortunately, it appears there's a lot your can do about it..!  Oh, yea--take AVG and shove it through the nearest window...  Be kind to yourself.  In 8.1, Defender is more powerful than MSE in 7 and Vista and XP, and MSE is not only great at protection, it also has a very light footprint and is the very antithesis of AVG in terms of being the sort of invasive, layered, resource hog that AVG is (at least, in my experience.)  He who travels light travels best, etc...

  • Slow response time, applications won't load, etc.

    I'm writing this on behalf of my sister, who is on a MacBook Pro, operating Mac OS 10.4.8.
    Just yesterday, she began to notice extremely slow response time on her laptop, with applications taking up to 5 minutes to load sometimes, and the Internet subsequently taking ages to switch from page to page. The laptop is also constantly freezing up, with the spinning circle showing up frequently, as well as complete system freezes on and off.
    I went on the computer and repaired disk permissions, as well as verified the disk. All went fine. Tried to do a software update in order to update to 10.4.9, but the computer freezes before it can even really begin to download the information.
    Numerous reboots were also tried, with nothing working. I don't want to have to do something extreme like reinstalling the operating system without knowing that there might be a simpler solution, so that's why I'm here! I'd also like to know whether we can save her files (documents, etc.), if a reinstallation is needed.
    Edit: She reports that she did install or download any software or file attachments, and keeps insisting that the problem virtually came out of nowhere, in case this helps!
    Thanks!
    MacBook Pro   Mac OS X (10.4.9)  

    Alright-her computer has gotten progressively worse, and has not even managed to reach the log in screen for the past 10 minutes. Just a grey screen, an apple, and the little twirling loading thing.
    Am at a loss as to what to do...last night, I could log in, but it was still hanging and taking just about forever for it to do anything.
    Is a reformat the only thing left to do? She does subscribe to AppleCare-is it worth calling them, or will they just tell her to reformat as well?
    Edit: I'm beginning to think this might date back to a lightning storm we had a couple days ago-does this sort of behaviour seem to follow the behaviour or something that experienced an electrical surge? Her phone in the room was acting funny as well for a few days.

  • Slow Rendering...Any tips on speeding it up?

    After dealing with a bag full of issues with my G5, I have replaced my system drive, replaced 2 1gig sticks of RAM that was defective and have upgraded to the latest version of FCP studio crossgrade. Now I am back to editing a documentary I started before I had all those issues. I am noticing the rendering seems real slow compared to how it was before the issues. At first I only noticed this with the RED bars but today I learned that the ORANGE bars are slow to render too! It always took about a minute or under for most things to render on my machine. Now its taking up to 10 minutes! The GREEN bars render out in no time...super quick.
    I have my timeline set to UNLIMITED RT. I have 2.5 gigs of ram in my machine. Is there a setting that I may have overlooked that I need to set to speed up the rendering time? I had to put a fresh copy of FCP studio on my new hard drive so I had to do the settings all over again and may have overlooked something.
    Thanks!

    *Sorry, I just looked at your OP again, where you mentioned you have Unlimited RT set. So everything I wrote below probably won't apply. But I would still double check your RT render settings. Maybe something is getting rendered that wasn't before. Also, if you're bringing in clips that were not captured in FCP, transcoding from anoter codec would slow things down. (such as Avid or iMovie's dv stream format)**
    Disregard this if you're already aware, but here's how the color bars work. They're actually an indicator of your system's ability to play realtime effects (without rendering). A dark green bar means a clip is rendered. A light green bar means your system will have no problem playing that effect back at full speed. An orange bar indicates probable dropped frames or slowdown through playback. A red bar obviously means that the effect cannot be played in real time and needs to be rendered. Whether or not your system is able to play something back depends entirely on the power of your hardware. More ram, a better video card, or video effects card all effect real time playback.
    Final Cut has the option to switch between Unlimited Real-Time (RT) and Safe RT. Safe RT will only limit realtime playback to those effect it knows it can play safely, and ask you to render everything else. Full RT will attempt to play any realtime capable effect back in realtime.
    When an effect is played back in realtime, it may gracefully degrade the quality of the clip as needed in order achieve full speed, and can result in a somewhat poorer looking image. If you want to make sure to see your video at absolute best quality, always render before playback, even if the bar is light green (you may need to tell FCP to specficially render light green bars under the render menu).
    So what does this all have to do with your problem? I suspect in the past your machine was trying to handle as much playback in real time as possible and did not require you to render as often, or as much. This is why you may never have seen the dark green bars. You may have switched to Safe RT or no RT which is asking you to render more. There is menu for RT playback in the upper right corner of the Timelie window.
    Just a hunch, hope it helps. (Also hope I got all the RT mumbo jumbo right, its been a few months since I've gotten to sit down at an FCP machine).

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • Is ther a way to speed up a Mac? Mine has gotten slower and slower over time.  When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

    Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time. 
    When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Maybe you are looking for

  • Special characters in URL parameters retrieved as question marks

    Hello, I am posting a simple HTML form to a WebDynpro application, and then I retrieve the 2 parameters with the following code : IWDWebContextAdapter adapter = WDWebContextAdapter.getWebContextAdapter(); String comment= adapter.getRequestParameter("

  • Problems with camera and photos

    Hi so I just got the new iphone 5s and every time I try opening up my pictures or just using the camera, it quickly returns to the home screen. How do I fix this?

  • Interface or Third Party Software for viewing SAP Org. Structure in SAP

    Hi All: Has any one used a third party software for viewing the SAP Organizational Structure in portal (for MSS). Or has developed a custom java iview that would display the org. structure in Portal. (EP 6.0)? Thanks

  • Dreamweaver sc6 fluid grid layouts and nivo slider

    I have the nivo slider pretty much set up on my home page, with one exception. I have a sidebar to the right of the slider and the slider bullets end up above the sidebar as opposed to below and centered below the slider. If I remove the sidebar and

  • What do view of damaged lotus notes nsf file?

    A disc that was formatted lotus base. After the restoration of utilities through almost all the bases when opening throw an error "File is not database", "File does not exist" or "Database is corrupt - Can not allocate space". What tools can be used