Will Solaris 2.7 device drivers work in Solaris 2.6

I have three systems running Solaris 2.6 for a customer application. My customer has requested a fourth system. The new system has the newer SCSI host adapter AIC-7890. Solaris 2.6 does not recognize the adapter and will not allow me to boot from the installation CD. I downloaded to Solaris 2.7 boot disk and it recognized the hardware. I tried using the Solaris 2.6 CD only to find out that it does not have the driver for the CD.The message I receive is:
" can't load drivers for pci@0,0/pci9005,f@6/sd@3,0:a.
can't load filesystem"
How much trouble would it be to get the 2.7 device drivers and use them in Solaris 2.6? Or would I better off upgrading to Solaris 2.7? I am trying to avoid maintaining multiple versions of the operating system and not have to recertify my applications on the other existing systems.
Any suggestions would be greatly appreciated.
Eddie Morris - Lockheed Martin Mission Systems

* Hi Eddie,
You may use Solaris 2.7 for the new system and retain Solaris 2.6 on the 3 old systems. There shouldnot be any operational problems if you have a mix of Solaris 2.6 and 2.7 systems. However, if you really do not want to maintain multiple versions of the OS, you may upgrade the Solaris 2.6 systems to Solaris 2.7.
Thanks

Similar Messages

HT5188 Will "removing apps from devices" also work with other mobile device management systems like i.e. Mobile Iron?

As we are a very big company and working with a high end mobile device management system (Mobile Iron), we cannot use the configurator for iOS devices delivered with Mac OS.
So my question is, whether it is or will be possible to reuse redemption codes also for devices being managed by other MDM systems than Apple configurator.

As we are a very big company and working with a high end mobile device management system (Mobile Iron), we cannot use the configurator for iOS devices delivered with Mac OS.
So my question is, whether it is or will be possible to reuse redemption codes also for devices being managed by other MDM systems than Apple configurator.

I need help is takeing a solaris 9 soc drive to work in solaris 10

I need to get a Sparc Storage Array to run under solaris 10. The soc driver that is needed is not supportted under solairs 10. I took the packages needed off of solaris 9 cds and installed them but no luck. I tried to to do a modload and modinfo but it was not there.
The package loaded a file into /kernel/drv/sparcv9/soc. I have solaris 9 onanother disk on the same system and looked at the system trying to copy and edit the files on 10 but not device paths show up in the system. I copyied a file called soc that was in /kernel/drv/ I edited the /etc/device_aliases and path_to_inst but no good.
There are no entries in the /devices/ dir that reference the soc path. I do not if than can work but really would like to get this working.

http://forum.java.sun.com/thread.jspa?threadID=5276131
(never mind that this OpenSPARC forum is utterly wrong for your question)

I did every step including reinstall intunes to get my IPod touch to sych with intunes and not show up as a camera and nothing works. I even updated the device drivers. Genius bar at apple store told me the ipod was fine, the problem was my intunes. Help

I did every step including reinstall intunes to get my IPod touch to sych with Itunes but it fail to recognize it as anything other than a camera. It still recognize my Ishuffle as a device. The Genius bar as an Apple store told me the Ipod worked on their Apple PC, my pc is not an apple, I attemped every step to rectify the situation including updating the device drivers. I wonder if I need to eliminate every old residue with the word Apple in it on my computer to get it up and going again. Please help !

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

I'd start by looking in system profiler.
the blue Apple icon > About this Mac > More info...
goto the hardware section. Scroll down and click on USB
See what happens when you have the device plugged in & not plugged in.
Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse. Keyboard usb ports are rather low power.
Perhaps device is taking too much power. Are devices power or unpowered? Try connecting devices to a usb hub.
Which mac do you have?
What iMac do you have?
Report system info
Blue apple > about this Mac
click on more info
click on hardware
do not copy your serial number

Iphone 4S will not charge, error that USB device not working, found any suggestions?

iphone 4S will not charge, error that USB device not working, found any suggestions?

Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen

Will 10.6 drivers work the same with the Lion Operating System (10.7) Mouse

Hi everyone i was hoping to know if 10.5 - 10.6 drivers work on 10.7 to use a mouse because i would really like the Razer Mamba and the 2012 edition has 10.5 - 10.6 drivers for it soo i was hoping that they would work with 10.7? Please respond quickly

The reports on this seem to be mixed. You might have more luck getting good information on the Razer forums, or contacting their customer support directly.

Will hardware drivers work with the run-time engine or only a full version of Labview?

Hello.
I'm trying to get a quatech I/O card to work. The instructions with the drivers we were given state "you must have labview installed before installing these drivers".
A program I wrote on my machine works fine with those drivers and does toggle outputs on the card, but when I build it into an executable on our test unit (doesn't have a full version of Labview, just the Run-Time engine) the card doesn't work.
We installed the run-time engine on the unit, then the drivers.
I guess my question is: Do most drivers work with both the full version of Labview and the run-time engine? Or do I need to somehow 'convert' these drivers to work with the run-time engine?
Th
anks for your help!
Dave Neumann
[email protected]

Dave:
I can't determine which dll is required but if there are more than one that
shipped with the quatech I/O card try to placing one dll at a time in the
same directory as the exe so that you can determine which one is the
required one. If that doesn't do it then it may need more than jsut one of
the dlls so placing all that came with the quatech I/O card s/w driver
package in the same directory as the exe should do the trick.
Best of luck.
-Tom
"Neumannium" wrote in message
news:[email protected]..
> Tom,
>
> Thanks for your reply. One of the problems I'm having is figuring out
> which .dll I would need to include (I'm not a software guy).
>
> Would the .dll your speaking of be different th
an the one which is
> installed with the drivers? I'm looking at a .dll that is installed
> when you install the labview drivers for this card, but the run-time
> engine still doesn't want to get the card to work. (The file installed
> when I install the drivers is called 'daqlv32.dll' and I don't know
> how to find any other .dll's I might need)
>
> Actually, it appears the card 'is' being seen by the run-time engine,
> but I'm getting impulses rather than distinct changes of state.
>
> Anyway, thanks for the help.
>
> Dave Neumann
> [email protected]

Re: Satellite C855 - How do I install device drivers without WLan connection?

I had to reset my son's Toshiba C855-1GP yesterday.
Bought it about a month ago and windows 7 was pre-installed.
I upgraded to Windows 8 Pro via online download.
I was able to reinstall Windows 8 via USB, but when I turn it on now, it's completely empty of programmes and applications.
I realise I need to download Windows 8 device drivers for the model in question (writing this from another laptop), but not sure how to do this as the wireless device is not being recognised and I am being told to connect via ethernet. Is this just a matter of buying a cable and connecting it from laptop to router?
Will establishing an ethernet connection enable me to download the relevant drivers?
I can't figure out which Wireless driver to download either, as 4 different options are coming up (is that because I'm searching from a different computer?)
Could someone list the hardware spec for the C855-1GP here so that I know which drivers to download?
Thanks in advance, and sorry for all the basic questions!

Thanks so much for your reply - I actually found an old ethernet cable that was lying around the house and downloaded WLAN driver from Toshiba website - 1st driver didn't work but 2nd one did! Now that I have internet on the computer I will be able to download drivers individually as I need them. Good to know I could have downloaded the driver onto a USB and installed that way - will keep it in mind for the next disaster!! Appreciate the helpful advice.

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers

I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem. I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all. Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood.
Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer. This also affected attempts to repair MAX.
All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem. I have now lost 2 whole days and I am getting desperate for a fix. Surely this cannot be the only case of this in the whole world.
Mike
CLD & Alliance Member, UK
Solved!
Go to Solution.
Attachments:
MAX problems.jpg ‏218 KB
NI mDNS errors.jpg ‏102 KB
MAX Devices.jpg ‏83 KB

Hi Dr.M
In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
I know you have been through a couple of these steps , but there may be some related links that could help as well.
http://digital.ni.com/public.nsf/allkb/B9107A7F281F9B408625720B0078E5A8?OpenDocument
As for your installation errors:
This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it. This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
-To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes. In the window that opens, find the service that the error message references. It will usually have a status of "Stopping."
-Double-click on the service to open the service's properties window as seen below.
-Try clicking Stop to stop the service. If this does not stop the service, set the service's type to Manualand restart the computer. It is safe to set the service to Manual because it will be started manually if it needs to run. After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland

Device drivers

Hi I have an issue with my touchsmart PC following a update a few weeks ago. The PC no longer connects to my wireless network automatically and has been trying do do an update and failing when powering up. The PC also no longer recognizes devices plugged into the usb port and now it wont recognize the wiresless printer. When trying to reinstall the device drivers It tells me it is unable to access the registration key and wont proceed. Any help gratefully recieved. Thanks

Hello perksm,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer is not able to connect to the Internet and cannot register new devices or configure them. I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
What model of router are you using?
Do you have other wireless devices that can connect successfully?
Is this an on-going, or recent issue?
Is the BIOS on your computer up to date? If not, you can follow this document on how to Updating the BIOS.
In the meantime, I recommend following this document on Using Microsoft System Restore (Windows 7). This should help restore your Operating System back to an earlier restore point.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Availability of Windows 7 Beta Device Drivers for some Lenovo Thinkpads

Good Day
   Lenovo will be posting 10 Windows 7 Beta device drivers* to it's public
Windows 7 beta webpage before the end of May. The drivers posted will be:
1) Lenovo System Interface Driver
2) ThinkVantage Active Protection System
3) UltraNav Driver with support for single and multi touchpad systems
4) UltraNav Utility
5) ThinkVantage Power Manager
6) ThinkVantage Power Management Driver
7) FingerPrint Driver
8) Hotkey Features
9) ThinkVantage Access Connections ver 5.40
10) WWAN
   The drivers will be available at   www.lenovo.com/windows7beta
   These drivers are STRICTLY beta and have NO public support. Please do not
call the Lenovo HelpCenter seeking support as they will not assist you.
Feedback on driver issues via this thread is encouraged and those concerns will
be send back to the individual device driver development teams.
There will be 32 bit and 64 bit versions of some device drivers are available.
*Drivers are supported on RC Build 7100 and later. The drivers may work on earlier builds
Terry Lenovo Win 7 TestLenovo Enterprise System Experts

<chuckle> we are all excited to try them
Message Edited by Darksaber on 05-16-2009 10:28 AM
x200 7454-CTO; 320GB HD; 4GB; Win 7 64bit - Now on RTM.
- 2nd SSD with Win 7 Enterprise RTM
T61p - RTM - Win 7 Enterprise
S10 4231 for my wife - now on Win 7 Ultimate RTM

Mass Storage Device Drivers have been corrupted itunes 7.0.2 cant fix it

My ipods mass storage device drivers have been corrupted (Device cannot be started Code 10). Itunes 7.0.2 cant fix it. Im not willing to uninstall itunes and reinstall it to fix problem. I have 2 librarys on my hard drive with the guts of 120g of tunes/vids i know i wont lose the data but just dont want to mess with it. Is there any other way to fix the corrupted driver? Itunes 7 is great but they really should have the ipods driver seperate

I have uninstalled itunes 7.0.2 and installed the default itunes 6 software and ipod software then i updated to 7.0.2 and still same problem. Obviously the corruption is Windows related, but still cant work out the problem

Will Solaris 2.7 device drivers work in Solaris 2.6

Similar Messages

Maybe you are looking for