Will Solaris 8 support Promise ATA100?

Does Sun have any plans to support the Promise ATA100 controller on Solaris 8?

Well, if you have a Spectrum contract you should check out infodoc 10012. Basicly Suns Support division supports a Solaris release up til five years after its "last ship" date. During the first two years patches are created etc, during the remaining three years Sun offers telephone support and access to existing patches.
The Last-Shipment date for Solaris 8 isn't decided yet, at least not as far as i can see, so it should be supported for another few years.
//M.

Similar Messages

  • I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

    I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

    We'll know when it happens, Lucht - software companies don't make support promises in advance.

  • KT4, XP, Promise ata100 tx2 trouble

    I have major problems with my KT4 Pure Version and a promise ata100 tx2 controller card. Under windowsXP's event viewer I get 2 different types of warnings;
    1: Event 51; An error was detected on device \Device\Harddisk4\D during a paging operation.
    2: Event 26; The driver has detected that device \Device\Scsi\ultra1 has old or out-of-date firmware. Reduced performance may result.
    I've updated the BIOS which helped some other problems but this one still remains.
    Running anything like Emule on any drive connected to the card and it struggles to hash and will not complete a file, sits there with "completing" and my HD led fully on.
    I'm going to keep pluggin away, but im running out of ideas. Any advice would be most welcome here.
    System Spec:
    XP2600 333FSB
    Corsair XMS 3000 running 333MHz
    KT4 Pure
    Audigy
    3com NIC
    CD
    DVD
    HD on onboard ata controller
    4HDD attached to promise card
    Enermax 431W PSU
    XP Pro, Service Pack1
    Cheers
    Jez

    hi man,
    what brand of HD are you using?
    If WD, go to Westerndigital.com for drivers for your extra ata 100 controller.
    if you are using HD of more than 120 giga WD has a patch/driver for your extra ata 100 controller.
    i'm using Promise ultra 100 TX 2 on my k7t266 pro2.
    with a Plextor burner an WD of 60 G attached, very rock stable/easy install.
    What i did after purchase:
    install/connect the pci-ide-card on my mobo,
    start up win xp and windows installed it easily.
    BUT i installed the official driver for the controller too.
    At startup you will see after POST the name/type of your Promise card and the card will detect any devices: HD and/or cd-roms.
    good luck

  • When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

  • I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out.  I need these programs.  How do I proceed?

    I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks.  How do I proceed to get these programs back?

    Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class now and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, heard Apple will drop support. Help?

    I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class in FCPX and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX. Any truth? Advice?. I'm on 10.7.4 with 2.4 GHz Intel Core 2 Duo, 4 GB 1067 MHz. Thanks.    

    dkstj wrote:
    Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX.  
    While it is against the TOU of these boards to speculate on future products/updates what Thomas said is right: FCPX is quite a new product and it doesn't make any sense to drop it now.
    The only thing that MIGHT get dropped at a certain point is support for older hardware/OS as FCP X progresses.

  • Had to buy NEW HP due to Lexmark will not support Leopard

    I purchased a new HP PSC7280 due to the fact that LEXMARK tech support sent me an email stating that they will not support LEOPARD on my printer and X9350 (top of the line consumer product for lexmark) even though they state on their website they should have a supported driver out in March of 2008. First, I can't wait six months to be able to print. Second, they did this with the printer I had before and when the printer driver was released it was just the printer driver no scanning or faxing support. Had to buy a new printer then. Third I think I remember something that the new OSX Leopard was announced and developers had free copies made available back at WWDC so Lexmark evidentially does not want to support Macintosh... By the way the Hewlett Packard PSC 7280 works seamlessly with no problems for printing, scanning, or faxing and it does it wirelessly... (Better than Lexmark ever did for me)

    I have had the same problem...can't even print on my x9350 using bonjour. How hard is it to keep up to date with a driver? I am not impressed with Lexmark - when I first bought the printer, I couldn't even order supplies for it. I think they are a bit disorganized. Next time, I am buying HP - the last HP I had lasted 8 years. And for the cost of the consumables, its not that big a deal to switch. Too bad - nice printer.

  • Will itune support window 8.1 pro

    Dear Sir/Madam
      I recently upgrade my laptop software from window 7 to window 8. I warn to update to the window 8.1, will itune support it ?
    Thank you

    However, currently iTunes does not even open on Windows 8.1 Pro.  Many people are having problems and Apple has yet to acknowledge this issue.  Apple always takes forever to admit that their software is broken.

  • I have an early apple tv. Will it support netflix streaming? Also what is the size of the newest apple tv's hard drive? And, will my current apple tv be able to use the icloud services?

    I have an early apple tv. Will it support netflix streaming? Netflix does not show on the internet tab on the AppleTV display.
    Will my current appletv connect to icloud services, synch, etc.?
    Also, what is the size of the current appleTV's hard drive?

    1. No to NetFlix and ATV1
    2. If you mean your ATV1, no.
    3. If you mean your ATV1, there are more than one hard drive size.  If you mean the new ATV2, it doesn't have a hard drive.

  • HT3986 I wanna install window 7 in MacBook pro...!! In that, such software like CADD,Pro-E etc will b support to this MacBook pro...???

    I wanna install window 7 in MacBook pro. In that, such software like CADD,Pro-E etc will b support to MacBook pro..??

    http://www.apple.com/support/bootcamp/
    It is not clear what you are asking. You can install Windows 7 on Macbook Pro using Boot Camp Assistant. Follow the linked to instructions. All Windows programs will work just as they would on  a Windows PC with similar specs as your Macbook Pro.

  • Will OSX support Adaptec PCI Express scsi cards in an early 2008 Mac Pro?

    I need to move my scsi interface scanner from a G4 machine and the old PCI Adaptec AHA 2930 CU card won't fit.  I was using Snow Leopard on the G4 unit - it still supported the Adaptec card and all was good.  My 23" Cinema display then bit the dust and I replaced it with with a 24" Cinema display with the mini display port connector.  I purchased an adapter from Kanex to make it compatible, but the adapter was defective - so I returned it.  Their reviews aren't very good - seem to have a lot of D.O.A. adapters - not sure I want to deal with the frustration, but it would be the least expensive option.
    I do have, however, an early 2008 Mac Pro that I can use, provided that it supports the newer PCI Express scsi cards that Adaptec makes.  I'm not sure which one to get yet, either.  I'd rather not buy one and find out it won't work.  I can make a partition on the boot drive for Snow Leopard in case scsi isn't supported in later versions of OSX.  In case you're wondering, I did use a scsi to firewire adapter to run the scanner on my laptop for a while - but it stopped working and I can't locate any replacements (or the company - 2nd Wave Technologies - for that matter).  I haven't tried locating a scsi to usb adapter, but from what I can see, they are getting pretty scarce.  I'd replace the scanner, but it is fairly pricey and the newest model retails at the price of a small car - so that really isn't an option at this point.
    Thanks in advance for any info.
    Message was edited by: Jakob Richardt
    Changed name of display adapter manufacturer.

    Thanks for the response - I guess the question I should have asked is "Will OSX support scsi cards in an early 2008 Mac Pro and if so, which ones?"  I didn't realize Apple and Adaptec weren't working together - my G4 tower arrived with an Adaptec card in it when I bought it in 2000 (from a third party vendor, not directly from Apple).  It came with either OS 8.* or OS 9.  When I updated to OSX, everything continued working, so I didn't think much about it until I pondered using the Mac Pro for the scanner - at some point the G4 is going to stop working - need to have a solution before that happens.  The manuals I've been reading refer to the slots in the G4 machines as PCI.  The manual for the Mac Pro refers to the slots as PCI e.  These slots have fewer connectors, so I thought that the "Express" part of the name referred to this particular card configuration when compared to the longer card connectors in the G4 type of machines.
    Can you tell me what scsi card brands will work in the Mac Pro?  I'd still like to pursue this option.  As I mentioned in my original post, buying a new scanner isn't in the cards right now - it costs more than the computer, so, although pricey, the card option is still less expensive.
    Thanks!

  • When Flash Builder 4.6 for PHP is released will it support AIR 3.2 ???

    We've all been waiting a long time since last November's Private Beta of Flash Builder 4.6 which was released shortly thereafter, for the Flash Builder 4.6 for PHP version.
    However, Flash Builder 4.6 for PHP (The one with Zend Studio included in it) is scheduled for 2012 - Q1 release, meaning?
    I guess, at the latest March 31st.
    This is significant, because AIR 3.2 is Great, but it will Live or Die based on what happens, I believe, in the next year, the new demo with the 2 geniuses at Adobe, Lee Brimelow and Thibault Imbert, which essentially ARE the driving intellectual force behind AIR, make me feel more comfortable than the management at Adobe,
    http://tv.adobe.com/watch/adc-presents/hardware-accelerated-graphics-for-mobile-games-with -adobe-air-32/
    So, when FB 4.6 for PHP is released, will it support AIR 3.2?
    There's another thing, there are a ton of job offerings for iOS 5 or Android Java, but no AIR (very few and the damage control fromthe eff'ed up press release is still meandering).
    Adobe needs to compliment its consumer base and developer base, with a Developer Network for Corporate integration so there are contracts out there for us who live between our dream ideas and meals, by doing contracting work, and it'd be nice to do it in Flash Builder 4.6 instead of taking on an iOS 5 or Android Java or PhoneGap project.  At least for Gamers.
    REPORTS: Social Gaming will be a $5B industry by 2015. The total mobile market will be a $15B industry by 2015.
    I'm shooting for the Social Gaming, and I like what I see in the above video.
    But again, people have to pay bills, why doesn't Adobe reach our to Corporations for certified developers like Mickysoft and Apple?

    I worked it out in the end - I had to uninstall FB4.5 and reboot. Why couldn't the installation say so instead of just crashing? I found this out, by the way, by trying to run the installer created under c:\program files(x86)\adobe\adobe flash builder 4.6. That one told me at least that I had to uninstall a previous version, though even then it was coy about which one

  • How long AEM will be supported on Jboss 5?

    I have looked into support note AEM 5.6 is supported both on Jboos 5.1 and Jboss 7.1. Jboss 5.1 supports end of this year ( 2013) so we are wondering if AEM will stop supporting jboss 5.1 end of this year ?

    You are asking a question, which affects both product strategy and product support, so I don't think, that you get a valid answer here. For me this isn't the right channel to ask such fundamental support questions like this
    Jörg

  • Any idea when we will get support for Java 7.5 in Safari?

    I'm in school for a degree in software engineering and Java is a big part of it.  As a regular Mac user who uses Safari as his main browser, it's disappointing that adoption of the latest Java versions in Safari seem to be lacking.  Is there any way to get Safari to look at the latest versions of Java instead of being stuck on Java 1.6?
    Thanks in advance for any help! :-)

    Apple has kept up to date (more recently) with the latest releases of Java 6 (1.6.0_33), which is the current public release of Java. You can install the development Java 7 runtime from Oracle (currently on build 5), but this will not support many features and functions of the final release. All future updates to Java will be issued and maintained by Oracle as it's done on other platforms. Apple will not be offering an in-house Java runtime after Java SE 6. You can get the latest Java updates here: http://www.oracle.com/technetwork/java/javase/downloads/index.html

  • Which Software Train will be supported

    We have several 3640 Routers in Our network.
    The Life Cycle have the following results:
    End of Sale = 15.12.2002
    End of Engineering = 30.11.2005
    End of Life =30.11.2007
    Cisco Policy
    =========
    Where available, we will provide bug fixes, maintenance releases, work arounds, or patches for critical bugs reported via the TAC or Cisco.com Web site for a period of 5 years from the end-of-sale date for operating system software and for a period of 3 years from the end-of-sale date for application software. Bear in mind that it may be necessary to use a software upgrade release to correct a reported problem.
    Questions
    ========
    Which Software Train will be supported and maintaint (also vulnerability) until 5 Years after the EOS Date for the 3640 plattform as
    described in the Cisco policy ?
    which Train is supported for the 2600 Router plattform ?

    The last supported release for the Cisco 3640 and 3640A routers is Cisco IOS Software Release 12.4 Mainline
    The Cisco 3640 Router will continue to support new IOS features through 12.2T and 12.3T, and software support will be provided through 12.4M or November 2005, whichever comes first.This support will be until 2007, November.
    The 3640A is identical to the 3640 in terms of physical characteristics, interface support, performance, memory and IOS feature support. All currently open mainline release trains and the 12.2T release train will be supported, starting with the latest maintenance releases: IOS Releases 12.0(24), 12.1(17), 12.2(12) and 12.2(11)T1. The Cisco 3640 and 3640A will continue to support new IOS features through 12.2T and 12.3T, and software support will be provided through 12.4M or November 2005, whichever comes first.
    The following 2 documents will clearly answer ur question:
    http://www.cisco.com/en/US/products/hw/routers/ps274/prod_eol_notice09186a008032d840.html
    http://www.cisco.com/en/US/products/hw/routers/ps274/prod_bulletin0900aecd802a94b0.html

Maybe you are looking for