Will sun cluster 3.2 support apache version 2.2.10 ?

Hi,
will sun cluster 3.2 support apache version 2.2.10 ?
Thanks
Ushas Symon

Hi,
the question is, what the original poster meant with "is supported". If this was about getting support from Sun if something does not work, then this is really not supported.
If the question is whether 2.2.10 would work with the currently shipping agent, then this is a different story. It could work; I would just give it a try.
Regards
Hartmut

Similar Messages

  • VMware ESX + Sun Cluster - is it supported?

    Do you know if Sun Cluster installed on top of VMware ESX can be supported by Sun/Oracle?
    Do you know what requirements newly installed cluster has to meet in order to satisfy Sun's support contract?
    Regards,
    Marek Barczyk
    Edited by: Marek_Barczyk on Jun 29, 2010 7:13 AM

    The binaries (executables) in an Oracle home are "linked" (link edited?) to the OS libraries on each server where the software is installed.
    Unless the OS is IDENTICAL on each of the IDENTICAL(HW) servers -- that would share the Oracle home--, you could be in trouble.
    The only supported configuration (I know of) where the Oracle binaries are shared between servers is 9i RAC. On 10g RAC the binaries are installed on each server.
    Other wise I'd say it's NOT recommended, besides you don't save anything (execpt a cooupl of Gigs disk space).
    :p

  • Will sun still be giving support to java reflexions in the future?

    I have listen that in some versions of java they remove the reflexions support (i don't know wich.. 1.3, 1.4...?). And in the next they give it back.
    If its true, do you think it's secure to use reflexions (e.g. for tests), knowing they could remove it again...?

    wellington7 wrote:
    I have listen that in some versions of java they remove the reflexions support (i don't know wich.. 1.3, 1.4...?). And in the next they give it back.
    If its true, do you think it's secure to use reflexions (e.g. for tests), knowing they could remove it again...?It has never been removed.
    Kaj

  • Sun Cluster 3.2 + Apache Web Server (Apache HA)

    Hi All,
    I am trying to setup an HA Apache Cluster with Sun Cluster 3.2 and Apache Version 2.2.15.
    i have faced a problem saying unable to create resource group
    clresource: (C273000) apache-web.nntele.net-rs: Invalid resource name
    clresource: (C891200) Failed to create resource "apache-web.nntele.net-rs".
    i run the follwing commands:
    /usr/cluster/bin/clresourcegroup create -p nodelist=node2.nntele.net,node1.nntele.net apache-server-rg
    /usr/cluster/bin/clresource create -t SUNW.HAStoragePlus:8 -g apache-server-rg -p FilesystemMountPoints=/global/apache global_apache-rs
    /usr/cluster/bin/clresourcegroup online -emM apache-server-rg
    /usr/cluster/lib/ds/apache/configureApache.ksh copyConfiguration node2.nntele.net /global/apache /usr/local/apache2/conf/httpd.conf /usr/local/apache2/htdocs /global/apache/apache-web.nntele.net-rs apache-web.nntele.net-rs
    /usr/cluster/bin/clreslogicalhostname create -g apache-server-rg -h web.nntele.net -N [email protected],[email protected] web-nntele-net-rs
    /usr/cluster/bin/clresource create -t SUNW.apache:4.1 -g apache-server-rg -p Resource_dependencies=global_apache-rs,web-nntele-net-rs -p Port_list=80/tcp -p Bin_dir=/global/apache/apache-web.nntele.net-rs/bin apache-web.nntele.net-rs
    Please Help Me .... Thanks In Advance.

    You can't do it with the agent directly as it stands, as far as I can tell. However, you could do it indirectly by creating a pool and binding that pool to the FX scheduler. You then create a zone and bind the zone to the pool and put the HA Oracle instance in the zone If you do that on both nodes you achieve what you want (I think). I've never tried this, but it would appear to be feasible.
    i.e. your RG list would be:
    node1:zone1,node2:zone2
    Regards,
    Tim
    ---

  • When will Sun begin to Support Games Dev?

    As the title states, when will Sun start to seriously support games development. With 1.5, 1.6, 2.0???
    Must improve the VM, for speed.
    Will they ever add LWJGL to the API, with improvements of course?
    I personally think Java is a great language and hope to develop many games and maybe one day stick it to M$ and their developers.

    Not so much a question of running the game on any platform of one CD (although I think that might actually increase sales in that funny way that good ideas often do) but you certainly would gain from developers being able to use a single lot of code across many platforms.
    I found this in a PC Zone article about the forthcoming Matrix game a couple of months ago:
    ... with a simultaneous PC, GameCube, Xbox and PS2 release in plan, isn't there a chance that PC owners will be saddled with another massively console-oriented title? Not so, says Dave [ Perry ] who explains that shiny's ground-breaking cross-platform engine was designed from the ground up to use every machine to its full potential.
    �
    "Every minute spent making the game causes the results to appear on all four platforms. No matter what platform you're using, the game engine is squeezing every last bit of performance out of the hardware."
    That's what I'm talking about- it's a bit late now, but if Sun had been clever it could have been Java doing that.

  • Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?

    Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?
    Where can I check compatibility matrix?

    matthew_morris wrote:
    This forum is about Oracle professional certifications (i.e. "Oracle Database 12c Administrator Certified Professional"), not about certifying product compatibility.
    I concur with Matthew.  The release notes for sun cluster and oracle for solaris might tell you.  oracle 9.2.0.8 is out of support on solaris and I recall needing a number of patches to get it to a fit state ... and that is without considering sun cluster.  Extended support for 9.2.0.8 ended about 4 years ago ... this is not a combination I would currently be touching with a bargepole!  You are best to seek on MOS.

  • Sun Cluster Application Development

    Hi,
    I am trying to create a sun cluster application using the GUI version of the Agent
    builder, "rtwiz".
    I successfully execute the create and configuration steps.
    I install the package.
    When I start the cluster application from the /opt/SUNWsample/util directory,
    it fails in the step when it is trying to create a resource, the error message which
    I get is "VALIDATE method failed".
    Can somebody tell me what this problem is. Is the Validate method being run
    from the /opt/SUNWsample/bin directory.
    thanks.

    The validation method checks the options be used to register the resource is correct. Are you using the correct option?

  • Adding a floating VIP to a Sun Cluster

    Hello all,
    I've been looking through the manuals trying to figure out how to add a floating VIP between two nodes in a cluster? There are two nodes in this cluster and the VIP needs to be able to float between the two, being active on the primary node, any help appreciated?
    Sun Cluster 3.1 is the version.
    Thanks
    William

    Hi William,
    nothing easier than that.
    A VIP or logical IP address must be configured as a cluster resource; every resource must be part of a resource group. So
    1. Make sure your logical IP address is part of each nodes' /etc/host - could be in a name service, but then your cluster would rely on the name service, which is not recommended.
    2. Create a resource group: "clrg create my-rg"
    3. Add the logical IP address to this RG "clrslh create -g my-rg my-lh", where I assume that your IP address is called my-lh.
    4. Start the RG "clrg online -M my-rg"
    Hope that works. If if doesn't , please post what you did, including any error messages, here
    Regards
    Hartmut

  • Can I install Sun Cluster on LDOM guest domain. Is Oracle RAC a supported c

    Hello,
    Can I install Sun Cluster on LDOM guest domains. Is Oracle RAC on LDOM guest domains of 2 physical servers a supported configuration from oracle?
    Many thanks in advance
    Ushas Symon

    Hello,
    The motive behind using LDOm Guest domains as RAC node is to have a better control of the resource allocation, since i will be having more than one guest domains which should perform different functions. The customer wants to have ORACLE RAC alone (without sun cluster).
    I will have two T5120's and one 2540 shared storage.
    My plan of configuration is to have
    Control&IO Domain with 8VCPU, 6GB mem
    one LDOM guest domain on each physical machine with 8 VCPU's, 8GB of memory, shared n/w and disks participating as RAC node's. (Don't know yet if i will use solaris cluster or not)
    one guest domain on each physical machine with 12 VCPU's, 14GB of memory, shared n/w and disks participating as BEA weblogic cluster nodes (not on solaris cluster)
    One guest domain on each physical machine with 4 VCPU's, 4GB of memory,shared n/w and disks participating as apache web cluster (on solaris cluster)
    Now, My question is, is it a supported configuration to have guest domains as Oracle RAC participants for 11gR2 (either with or without solaris cluster).
    If I need to configure RAC nodes on solaris cluster, is it possible to have two independent clusters on LDOM , one 2 node cluster for RAC and another 2 node cluster for apache web?
    Kindly advise
    Many thanks in advance
    Ushas Symon

  • Does sun Cluster 3.0/3.1 HA Oracle agent support to use Oracle spfile?

    When defining the resource, the 'parameter_file' properties is usually sets to the Oracle pfile. Is it possible to use Oracle spfile?
    It is said if leaving 'parameter_file' NULL, it will be default to Oracle default. Suppose leaving it NULL and with Oracle spfile created in default location, will it use the spfile?

    You did not specify which Sun Cluster version and Oracle version you are running.
    Within SC 3.1 my understanding is that beginning with Oracle 9i it is possible to use the spfile.
    If you leave the "parameter_file" property empty (NULL) then the default behaviour for 9i should work:
    search under $ORACLE_HOME/dbs in the order:
    1. spfile$(ORACLE_SID}.ora
    2. spfile.ora
    3. init${ORACLE_SID}.ora
    Greets
    Thorsten

  • Does SUN CLUSTER WARE support ASM?

    Does SUN CLUSTER WARE support ASM?
    Where can I find the answer ? Thanks.

    I am not an expert but here it goes. Sun Cluster is used for clustering machines processes but NOT really used for clustering disks. This has to be done through third party software like Veritas. BUT why Sun Cluster the machines when you can cluster via Oracle CRS? CRS then uses ASM for clustered disks. Bingo you save money on Sun Cluster Software and Veritas software.
    One day Oracle will rule the world!

  • Which versions of Adobe Creative Suite will my MacBook 1,1 support?

    I purchased the Production Premium for a new desktop, but need to install at least Photoshop and Illustrator on my laptop.  It is a MacBook 1,1.  After spending a day trying to install (including an hour with an apparently clueless technician on the telephone), I did what he said and downloaded a trial version (of Creative Suite, as I didn't want all the other programs and have little room left in my memory).  It downloaded successfully, but then when I tried to open it, I got the message that my MacBook didn't support this version.  I can't work without these two programs.  I have already uninstalled CS2, which didn't support documents created at work (on CS5.5).  Is there any way to upgrade my system or downgrade my backup (to 5.5, if it will work), or do I actually have to buy a new laptop?

    or do I actually have to buy a new laptop?
    Yes. The first generation MacBooks do not support any of the required stuff for newer versions of Adobe products. The last one that would work on your system would be CS4, but that is 2 versions out of date and it still wouldn't open e.g. InDesign CS5.5 files. And no, there is no way to "downgrade". Adobe (and authorized resellers) only sell the latest version.
    Mylenium

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • Any idea when GTX 970's will be added to the supported list in the latest version of premiere? id like my cuda.

    Any idea when GTX 970's will be added to the supported list in the latest version of premiere? id like my cuda.

    I Too would like to know. I've finally finished upgrading my rig with a 970, and as far as I know, there's been some good things and not so good things. (I'm on CC 2014.1 with Windows 8.1 Pro) I'll post screenshots when I get back to my computer.
    FIrst things first: Make sure to install the CUDA specific to the 970/980. They have their own toolkit, that I believe people miss. I installed this, and then manually added my card to te supported cards file in the Premiere, AE, and Speedgrade files. When I opened Premiere, it's automatically set to use CUDA acceleration, so I believe it's supported there. I wasn't able to test this, unfortunately. I will confirm this soon.
    Second, when I open After Effects, the Previews preference pane states my card is supported, and all the info below it seems correct, like the shader model. The only thing that seems off is the OpenGL, which is set to 2.1.2 NVIDIA or something of the like instead of 4.x, but I believe its an NVIDIA optimized driver, so I'm not too concerned. The big thing for me is the error message that I recieve when I try to enable Ray-traced 3D. I recieve a compilation error, followed by another message, and I have no clue what to do with them.
    I'm really hoping Adobe releases an updates that bring full native support for these cards, as I'm running an class at my high school where I need to build three machines, all of which will have a 970 inside, and if Adbe doesn't support these cards, I'm kind of screwed as the pipeline is based completely in Adobe with its Dynamic Link and CUDA acceleration. Come on Todd, we believe in you!
    TL;DR     Yes, CUDA acceleration should work within Premiere Pro CC 2014.1, but make sure to install the correct CUDA drivers from NVIDIA (they should be in the yellow boxed text on the downloads page)

  • When will Oracle end support for Version 7

    We have several servers running Oracle 7.3.4 and we are making upgrade plans.
    Could anyone tell us when support for version 7 will end.
    Thanks

    Java 7 has already been dead for quite a while. While you could still use it for Java apps on your system, Apple blocked its use in browsers long ago. You have to install version 8 if you need Java support for the web.

Maybe you are looking for