Will support be provided to explicitly added libraries while migrating?

Hi,
I have migrated my project from Jdeveloper 11.1.2.1.0 to 11.1.2.2.0.
After the migration was done , some of the imports were not found by default in Jdeveloper , so they were manually added into the Libraries & Classpath of Project Properties .
These were the jar files:
Com.bea.core.weblogic.security.auth_1.1.0.0.jar
Wls-api.jar
Com.bea.core.weblogic.security.identity_1.1.2.1.jar
Will Jdeveloper provide these jar files for the new releases keep coming in the future ?
Thanks,
Nigel.

Hi,
JDeveloper doesn't keep track of your custom library references but its own libraries defined. If library names change then this may require manual correction, which cannot be avoided. If the JAR is part of the WLS platform then the library JARs will be provided
Frank

Similar Messages

Arch installation image::when will support for F2FS be added

I'm just curious about when the installation medium will support F2FS. I know from an installation that functionality can be installed, but my situation makes that problematic.

Just to help even more than the above post which is really helpful.
Quick HOW-TO install arch on f2fs filesystem with latest April.1 official live media.
Install f2fs-tools from aur, format root partition, format boot partition, modprobe f2fs before mounting and chrooting, add f2fs in modules list in mkinitcpio.conf on installed system.
This is one of the many ways:
(follow arch official installation guide)
create you partitions - you need to create boot partition!
(Before chrooting)
Add repo which contains yaourt to /etc/pacman.conf
[heftig]
SigLevel = PackageOptional
Server = http://pkgbuild.com/~heftig/repo/$arch
Install required dependencies (maybe I've missed some) and yaourt
sudo pacman -Syy
sudo pacman -S autoconf automake make gcc binutils yaourt
Install f2fs-tools finally
yaourt -S f2fs-tools
Load kernel module
modprobe f2fs
(in case your root partition is /dev/sda1 and boot partition is /dev/sda2)
create root partition as f2fs filesystem
mkfs.f2fs /dev/sda1
and boot partition as ext4 (or whatever you want)
mkfs.ext4 /dev/sda2
mount, install and chroot as per official installation guide
add f2fs to modules section (should be empty) in /etc/mkinitcpio.conf
remove fsck from hooks section (since f2fs doesn't have fsck yet)
re-generate the initramfs image
mkinitcpio -p linux
after you're done with everything, reboot and voila, there you have it.
Here are some benchmarks for those interested
http://www.phoronix.com/scan.php?page=a … 9_fs&num=1
Everything is very fast but I can't compare my view of performance to other filesystems since this is my first SSD.
Last edited by pkoretic (2013-04-17 19:38:03)

Will you explain the meaning of, adding a astrisc (*) before a variable

Hi All,
Will you explain the meaning of, adding a astrisc (*) before a variable.
ex: *var1, *var2.

Hi ravi,
1. This is actually a facility provided in abap syntax.
2. It is usually checked while saving a record.
3. For eg.
   If we have one variable
   EKKO
and another *EKKO
(They both are same only, with same structure)
(but two different variables)
4. The functional meaning, for usage purpose,
of *EKKO is OLDEKKO.
5. While saving the transaction,
the data is saved only if there is any change
in the values.
IF EKKO <> *EKKO.
*--- SAVE
ELSE.
MESSAGE 'NO DATA CHANGED'
ENDIF.
6. We can aswell use any other variale
eg. oldekko
     oekko
     myekko
etc,
7. But for business meaning,
R/3 has the facility for *
regards,
amit m.

Support was provided for FI/CO documents

HI,
currently i am in support project for more than a year.i wnt to involved in implementation project.so i hve given some interviews,
In my resume i am keeping a sentence is that"support was provided for fi/co documents"so interviewer is asking me what support you are providing for fi/co documents.somebody please help me to answer this sentence and what i need to say on this sentence when somebody will ask me?
Thanks
D.Dalai
Moderator: Please, do not use this forum for posing questions from interviews

Hello,
Please note that the number ranges in accounting is defined for a company code and fiscal year.
There is no number range of accounting documents at branch level.
When you go to create document number ranges, the first thing it would ask is "Company Code".
Regards,
Ravi

Will Apple still provide security updates\patches to iOS 5.1.1?

Can someone please confirm if will Apple still provide security updates and patches to iOS 5 (5.1.1)?
I really really hope the answer is YES because iOS 5 was released less then a year ago (October 12, 2011)... So I truly hope Apple is not throwing us under the bus here? I mean even Microsoft provides OS security patch support for 10 years so please NO fanboys or Apple defenders... just be real.

iOS 6 works perfectly fine for me.
Regarding your maps issue,
Apple is constantly working on improving their new Maps service, but until it reaches the level of finesse necessary to be usable, take a look at some alternatives.
If you would like to send a suggestion to Apple, please go to http://www.apple.com/feedback or you can Report a Problem via the Maps app by tapping the bottom right.
Bing Maps offers a very good maps service with Bird's Eye, a feature similar to Flyover. It's arguably better than Google Maps.
http://itunes.apple.com/us/app/bing/id345323231?mt=8
You can use Google Maps by creating a shortcut to the Home Screen with help from the article below.
http://www.ign.com/articles/2012/09/20/how-to-get-google-maps-on-ios-6
MapQuest also has a very nice app available.
http://itunes.apple.com/us/app/mapquest/id316126557?mt=8
Nokia Maps is another great service that you can add to your Home Screen via a web shortcut.
http://m.maps.nokia.com
Waze is another very well reviewed app.
https://itunes.apple.com/us/app/waze-social-gps-traffic-gas/id323229106?mt=8
Here's an article detailing how to receive Public Transport directions.
http://www.wired.com/gadgetlab/2012/09/transit-apps-ios6-woes/?pid=3798
If you want a YouTube app, Google has made a very improved version available on the App Store.
http://itunes.apple.com/us/app/youtube/id544007664?mt=8

Any chance that Aperture 3 soon will support the RAW format files from Leica V-lux 3?

Any chance that Aperture 3 soon will support the RAW format files from Leica V-lux 3?

Were all just users here no Apple employees so no one can say (and if Apple was here they wouldn't say either)'
It's just not the type of information Apple gives out. You can go to Aperture->Provide Aperture Feedback to let them know you want his camera included. But when that will happen is anyone's guess.
One strategy you can use for the time being is to shoot RAW + JPG (assuming the camera has this mode) and import both as a RAW+JPG pair making the JPG the master. Then when the RAW support comes out you can switch and make the RAW the master and process the file.
There are other ways to deal with this until the camera is supported. Post back for more info.
regards

Transaction that will support BDT (Business Data Toolset)

Hi All,
Can anyone provide me the list of transaction that will support Business datatollset technologie(BDT).
Thanks.

Hi,
BDT starts probably from R/3 4.6C...
I believe you could have searched before posting this.
Refer to this Thread for all your Answers:
BDT - Business data tool set
http://www.sapdevelopment.co.uk/enhance/bdt/bdthome.htm

5.3.1 is the final version that will support...

Hello -
I am very upset to discover that Cisco will no longer be supporting new software releases beyond 5.3.1 on the hardware that is widely deployed in my environment, including the core which is a pair of 7371 at 2 datacenter locations. Can anyone confirm if this is correct? Why would the WAVE-574/674 that just came out maybe 4-5 years ago not support anything beyond 5.3.1? What about version 6 coming out next year? What does this say about the future for WAAS?
Cisco WAAS, Release 5.3.1 is the final version that will support the WAE-674, WAE-7341, WAE-7371, WAVE-274, WAVE-474, and WAVE-574 platforms.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/release/notes/ws531xrn.html#wp63349
The last day of hardware support is not until August 31, 2017. So am I supposed to be stuck on 5.3.1 for the next 4 years and not take advantage of any new feature sets in the upcoming major releases? It's not like the WAVE series doesn't have enough CPU/memory to handle thew newer versions. I know the 7371 comes with plenty of juice to be able to support any new features you throw at it.
http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6474/eol_c51-700260.html

The WAE 274/474/574/674/7341/7371 all reached End of Sale in August 2012. WAAS release 5.3.x is the final release which will support these now end of sale platforms. The announcement for WAAS release 5.3.x in the release notes as being the final release supporting these now end of sale platforms is to assist customers in proper migration and software upgrade planning.
Cisco has provided major feature functionality well after the end of sale for the WAE 274/474/574/674/7341/7371 in August 2012, for example WAAS release 5.1 in December 2012 and release 5.2 in June 2013 were released well after the end of sale and provided new major features and functionality for the now end of sale WAE 274/474/574/674/7341/ 7371.
These end of sale platforms will continue to be supported in the WAAS release 5.3.x maintenance release-train cycle which will continue with software maintenance releases in accordance with standard Cisco policy for software end of sale. Software maintenance releases will continue in the WAAS release 5.3.x until the end of sale for WAAS release 5.3.x is announced and the end of sale milestone is reached at a later date and the now end of sale platforms will continue to be supported with release 5.3.x as needed.
This is NOT an announcement of stopping support for these now end of sale platforms and these platforms will continue to be supported in release 5.3.x. At a later date the end of sale/support for release 5.3.x will be considered/announced and after the first year after the end of sale for release 5.3.x we will provide bug fixes, maintenance releases, workarounds or patches for a period of 4 years in accordance with standard Cisco end of sale policy.

When you will support Arabic language in Pages??

when you will support Arabic language in Pages??

Menu > Pages > Provide Pages Feedback
They know, they do not talk to users generally, and the question is are they going to do something about Right to Left text. We await their pleasure.
Meanwhile use Mellel.
Peter

Is 32bit Hyperion planning will support on 64bit

Hi,
Is 32bit Hyperion planning will support on 64bit.
Thanks & Regards,
PC

Jbooth wrote:
Hi Satya,
The DCOM permissions are for the FDM/HFM products and not applicable to the other parts of the suite -- it is required regardless of the vendor you use for the SQL server.
Regarding your CSS exception error, can you login to Shared Services fine? http://gca:28080/interop -- this presumes you have it on the same machine. Have you reviewed the log files in \Hyperion\Logs\Services for Workspace and those in \Hyperion\Logs\biplus
Smartview is a client install and uses a few methods to connect to the system. There is an HFM Provider for SmartView, an interface from Planning, and also Application Provider Services -- review the smartview user's guide which is accessiable via http://download.oracle.com/docs/cd/E12825_01/nav/portal_2.htm You access smartview from Excel and use the Data Source Manager to connect to the appropriate provider.
Regards,
John A. Booth
http://www.metavero.com
Hi John,
thanks for the patient answers but, I didnt understand ur below statement(Bolded below) as Do you mean that I don't need DCOM permissions as I have SQL Server 2005 as DBengine for my Essbase 11.1.1.2 installation??(To remind you, (I'm not going for FDM/HFM products)
The DCOM permissions are for the FDM/HFM products and not applicable to the other parts of the suite -- it is required regardless of the vendor you use for the SQL server.
I have these queries too.
1) Can I have HFR as Client-install(like smart view) and connected to Essbase Server(which is installed in different machine)? and how to configure it to the existing Essbase Server??
2)I installed IIS6.0 and EPM 11.1.1.2(As Apache comes with it) on the Same machine.Where Do I use IIS 6.0 in my architecture? Becoz, Already Apache is there for the same purpose. I'm kind of bounced with this question?
3)I already installed Essbase, HFR, Workspace, Smartview, Esbase Studio, Provider Services in the Win2003 server box.
If I want to access the workspace(& HFR, if possible), from another machine with URL, how do I access it?
Please I need your expert guidance and your help is very very helpful for me as I'm new to EPM 11.1.1.2
Regards,
:Satya
Smartview is a client install and uses a few methods to connect to the system. There is an HFM Provider for SmartView, an interface from Planning, and also Application Provider Services -- review the smartview user's guide which is accessiable via http://download.oracle.com/docs/cd/E12825_01/nav/portal_2.htm You access smartview from Excel and use the Data Source Manager to connect to the appropriate provider.
Regards,
John A. Booth
http://www.metavero.com

My grandson loaded music to my Ipod nano with his Mac computer. Now I'm trying to add music and I have a windows based computer. Itunes is asking me to reformat my Ipod for windows. Will that erase my music already added?

My grandson loaded music to my Ipod nano with his Mac computer. Now I'm trying to add music and I have a windows based computer. Itunes is asking me to reformat my Ipod for windows. Will that erase my music already added?

Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081

Is Biztalk server 2013 will support Oracle database 12c?

Hi,
Can anyone suggest me whether Biztalk 2013 will support Oracle 12c?

1) Someone had suggested that the recent webcast with Larry Ellison would be about Database 12c, but that didn't make sense because the other presenter in the webcast was the head of SPARC.
2) Amazon is taking orders for a book called Pro Oracle Database 12c Administration that is supposed to be published on April 17th.
3) Apress Books has two titles announced for mid-May.
I would assume that those books cannot be published before the product is released, so those dates might provide some indication.
Edited by: Stew Ashton on Mar 30, 2013 9:21 AM

My Mac OS, 10.5.8, won't support the most recent Firefox and I need the most recent version it WILL support and how to get it, as it's not on this site.

I need a way to get a more recent but not current version of Firefox that my computer, a PowerPC processor Mac, will support. I am running OS X version 10.5.8. This processor/computer will not run Lion and the most recent version of Firefox will not run on it either.
On my second computer, same type, a newer version of Firefox crashes constantly while in Yahoo!

Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

When I try to add songs, iTunes wants to take off everything that is already there and will only add what I've added from my computer

the problem is that when i try to add songs, it wants to take off everything that is already there and will only add what I've added from my computer

shellhornj wrote:
the problem is that when i try to add songs, it wants to take off everything that is already there and will only add what I've added from my computer
An iPhone can only sync with one computer at a time. All of the music you want on your phone must be on the same computer.

Is there a update for Photoshop Elements 8 that will support raw files from a Canon T3i 600d?

Is there a update for Photoshop Elements 8 that will support raw files from a Canon T3i 600d?

You have two alternatives:
(1) Upgrade to PSE 9,10 or 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Will support be provided to explicitly added libraries while migrating?

Similar Messages

Maybe you are looking for