Will swapping out the internal hard drive in my MBP void the warranty?
Hello, Basically my question is, Can I change the internal Macintosh HD hard drive in my 15 inch Uni-Body MacBook Pro (Express Card slot) without voiding the warranty? If not, could I take my computer to an authorized Apple Service Center and have them change my HD?
Another question, My internal HD is 250 GB, I was wondering what is the size limit for my machine? I would personally like to fit 1TB in here
Yes, you can swap it without voiding the warranty. Instructions are in your user manual.
Western Digital has just released 750GB and 1TB 2.5" drives. They are taller (12.5mm) than the height specification for MBP internal drives (9.5mm), but it has been reported that they will fit anyway.
http://www.9to5mac.com/750GB-MAcBook-Hard-drive-12-5mm
Similar Messages
-
Power Mac G4 will not Recognize any Internal Hard Drives
My G4 was working fine and I wanted to install a driver for a 'Twin Turbo Mac Video Card' I had in a PCI slot but it required OS9 running. At the time, I had two internal drives 230 and 120 G running 10.4.11 but no OS9. However, I did have an external Firewire Drive with OS9 and OSX. I set my "Startup Disk" preference to boot from FW drive and selected OS9 then shut down my G4. When I powered back on I got the standard "gong" but on my display I saw a "Mac Folder and a Question Mark". I believe that means the system can't find a drive. Is that correct? I reverted back to my original configuration with the internal drives and the FW drive disconnected and I still see the "Folder and Question Mark". I inserted the Tiger DVD, held down the "C" key and it still will not boot from the DVD either. I once again tried connecting a FireWire External drive with OS 10.4.11 installed and the internal drives disconnected and still no bootup. I swapped out Memory, replaced the Motherboard and the battery and even tried resetting the PRAM. Still that stupid Question Mark is showing!! This has really got me puzzled. Any ideas or suggestions out there?
bhDepressing/holding the Option key at startup activates the Startup Manager (not open firmware). The resulting window shows all of the available startup volumes (hard drives, CD, DVD, etc).
Look at A flashing question mark appears when you start your Mac
http://docs.info.apple.com/article.html?artnum=58042
Will it boot in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
*Resolve startup issues and perform disk maintenance with Disk Utility and fsck*
http://docs.info.apple.com/article.html?artnum=106214
I'm not sure it would resolve your problem, but try a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Cheers, Tom -
Need help deciding on an internal hard drive for my MBP 15 inch.
Okay I'm tired of dealing hitting the wall with my internal memory. I don't want to use an external drive all the time so help me out. Please? I'm currently torn between the Western Digital Blue 1tb 7200rpm vs the WD Black 750gb 7200 rpm. I want the larger capacity of the blue but have heard some Mac users have had issues with it. Anyone have some advice or perhaps a recommendation for a better drive that meets any need I could possily have? Thanks for looking regardless.
Do not use WD Blue or other so-called "green" drives as they tend not to play well with Macs. The largest 7200 RPM notebook SATA drive is 750 GBS. The 1 TB drives are, I believe, all 5400 RPM. So if speed is a major concern then you don't want the 1 TB drives. Pay attention to the default warranties. Drive manufacturers have moved to unbundling the warranty, so you may get a one year warranty by default, but have to pay more for a longer warranty.
-
Can I boot mac from an external hard drive (internal hard drive hard drive closure)
Model: Macbook Pro 2010 mid
OS: OSX 10.9 Hard Drive: WD5000BPKT 500GB
For some reason I need to change my perfectly working internal bootable drive to external bootable drive.
I took out my internal hard drive, put it into closure, and then connected it to mbp with USB. But my mac cannot even recognize my external hard drive. It displays a folder with a question mark with grey background, which means it cannot find executable boot drive. I tried pressing option key during start up and nothing showed. Also, I tried resetting parameter RAM but still no luck. Any help will be appreciated.The reason is somehow complicated and most likely be related to the question itself, so I did not write it down. But here is the situation.
I bought a new SSD to update my HDD. I found a software called carbon copy cloner, which could do a bootable clone. I tried to clone my original hard drive to SSD and turned out the SSD only worked when it was connected externally. After I seeking a while, I found a solution from CCC website: do the clone again with putting my original drive externally and the SSD internally (I think it is a bug of CCC.)
You may say, "why not use time machine" instead of using a third party software. My answer is time machine is too slow, and I have to reinstall the OS. My focus is why my internal hard drive does not work externally since it should work. -
i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.
Hello
formatted ntfs
NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
how to do that in video
HTH
Pierre -
I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?
Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/ -
I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?
The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety . -
If I move the oldest 2/3 of my iPhoto library to an external hard drive, will I still be able to access those older photos? I assume that I will be able to select the source (internal hard drive or external hard drive)?
Yes, if you have a second library.
Here's one way to do what you want:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager -
Hi,does anyone know how the Iwatch will play music when it is not near a bluetooth device as it is stated in the feature setting..Icloud streaming,internal hard drive?
I did not hear them state the feature requirements directly in the streaming even but there are statements on the Apple website that clearly say that an iPhone is necessary. I'm guessing that other than Bluetooth for pairing with the iPhone, it's just not technically possible to fit any other radios such as WiFi or LTE into that form factor or battery capacity. I don't even remember them mentioning if it had a speaker or could pair directly with bluetooth headphones.
While I'm hoping that the watch has a reasonable stand-alone feature set, they didn't make it clear what exactly it can and can't do without an iPhone nearby. I also hope that they communicate this better in the coming days. -
Will Apple stores in Germany replace your iPhone if there is internal hard drive problems from a phone from the US. I am studying abroad and won't be home until December
You can try, but the iPhone warranty terms state that Apple "may" restrict warranty/service to country of original purchase...key word here is "may".
Good luck. -
Is it really THAT easy? It looks like it just slides right out after you remove the battery and the L bracket. I just got my MacBook yesterday and want to swap out the 120 GB drive for one of the 250 GB drives. I'm looking at either a Samsung Spinpoint M series or the WD Scorpio. I can get either at NewEgg for less than $200. Any thoughts are appreciated. I'm new on this forum from the G5 forums.
ThanksGlad I could help. Thanks for the . Good luck with the wife:->
-
2009 MBP can't see internal hard drive - for the second time!
Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
Thanks for any feedback!Hi
I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
broadband.vodafone.ie/download/files/storage_mac.pdf
Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
Cheers
Topes -
Can I use my old internal hard drive and copy everything into the new one?
My internal hard drive is running out of space, and I want to buy a new one. But to do that, I'll have to buy a external hard drive to back up everything and then copy it back onto the new internal hard drive , right? I don't have that much budget. So can I use the old internal hard drive that I took out of my Macbook and copy everthing back into the new internal hard drive after the repalecment? so I don't need to buy a external hard drive to back up everything
Tks!You will have to buy a new HDD and an enclosure to make the transfer. You can use Disk Utility to make the transfer.
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them. INSTALLING
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have. -
Swapping circuit boards for an internal hard drive
My story may be a bit long and roundabout, so please try and bear with me as I explain.
My PowerMac G5 is 4.5 years old and over the past few months, the DVD and my secondary internal hard drive, both the originals that came with my computer, have been slowly dying. I finally replaced the DVD drive the other day and was little by little copying the data off my secondary internal drive before it completely failed. One thing that seemed to help the internal drive run more smooth was unplugging the power cable and plugging it back in. A worker at an Apple store's Genius Bar also suggested swapping each internal drive to the bay that the other was originally in, to see if that helped at all.
Anyways, in the end, the drive was giving me so much trouble and I had unplugged/plugged the power cable so many times that eventually the part of the circuit board that holds the pin connectors straight broke off, so now I had no way to get my data off the slowly failing drive. Another visit to the Genius Bar and I was told that the drive was as good as done, but not wanting to believe that the majority of my film projects were gone forever, I contacted a store across the street from my old NYU dorm called Digital Society. They told me that the circuit board on the drive needed to be replaced and that the new board had to be taken from an identical drive. I soon realized that the primary/system drive of my G5 was in fact identical. So, after running Time Machine, purchasing new primary and secondary internal drives, re-installing the OS and doing a Time Machine restore - which was flawless - I took my two drives back to Digital Society where they swapped the circuit boards rather quickly.
Now that I'm back home, I was easily able to recover all my data from my failing drive... only after having its circuit board replaced, the drive is showing no signs whatsoever of the read/write difficulties and failures that it had been showing prior to the circuit board swap, which leads me to a few questions
a) Was it really the drive that had a problem, or the circuit board itself? Is there anywhere I could buy just a circuit board without having to buy a new drive just to get a circuit board? The drives in question are 400 gig Hitachi Deskstar, model #HDS724040KLSA80. While I'm not entirely sure the once failing drive should be trusted again, my old system drive - which now has a busted circuit board on it - still works perfectly fine.
b) If I'm able to get a new circuit board, how easy is it to replace myself? The guy at Digital Society did it very quickly and for a price of $120. Are there any video tutorials?
Thanks!Lot's of good question Will,
Hard drives are not what they used to be, if your work is important I'd replace them every 3 years & have 2 backups in the meantime.
I doubt you can get the circuit boards separate without buying a while questionable drive.
If I'm able to get a new circuit board, how easy is it to replace myself? The guy at Digital Society did it very quickly and for a price of $120.
1 TB 3 year warranty $99...
http://eshop.macsales.com/item/Samsung/HD103SJ/
1 TB 7 year warranty...
http://eshop.macsales.com/item/Samsung/HE103UJ/
More cheaper drives...
http://eshop.macsales.com/shop/hard-drives/3.5-SerialATA/WesternDigitalCaviar
Maybe you are looking for
-
We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
-
I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.
-
Applescript running at a specific time of day
I have a headless server. If it fails to shut down I want to run script that would force it to shut down. The shut down script I have. tell application "System Events" shut down end tell or if needed do shell script "shutdown -h now" password "YourAd
-
New Ipod touch will not sync up with itunes. No error message, it just doesn't sync
I just bought a new 32 gb ipod touch and it will not sync up with my itunes. I don't get an error message or anything like that, it just does not sync up. HELP!
-
Embedding a "Current Date" field in a pdf document
To assure people work to the latest authorized version of a procedure, we let them access a protected pdf version on our Intranet. They can print a copy for use, but the copy is valid ONLY for the date printed, which is shown in the footer of each pa