Will the bumper interfere with signal strength

This might be a stupid question but hear goes.
With the iphone 4 the antenna is built into the band around the phone. If I put the rubber bumper around the phone will that interfere with the signal strength..

Except the Apple one is hard plastic coated in rubber. The marware one is pure rubber with rubber pads for the buttons.
I would rather spend the $30.00 on Apple's version with the meta buttons, hard plastic coated in rubber and made to work perfectly with the iPhone 4 than to buy a molded piece of rubber that will stretch out and may make button pressing horrible.

Similar Messages

Will the 20" work with a Mac Mini?

I've heard that the apple cinema monitors only work on PowerMac G4's and G5's. Is a Mac Mini a powermac g4. or will the monitor work with a mac mini?
mike

Yes, all the latest Cinema displays work with the mini except for the 30".

I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

Bad idea. There are no supported iPhone carriers in Iceland, thus some features may or may not work. Further, there will be no warranty or support for a US purchased iPhone in Iceland...your friend will be on their own. If you still want to go down this road, make sure you purchase an officially unlocked iPhone(GSM model) directly from Apple.

Will the current iMac with two Thunderbolt ports support up to 12 devices (6 per port) or just 6 total?

Will the current iMac with two Thunderbolt ports support up to 12 devices (6 per port) or just 6 total?

If will handle 7 devices total, you will use one thunderbolt port as an upstream and the other as a downstream.
Take a look at this link, http://en.wikipedia.org/wiki/Thunderbolt_(interface)

Wary about upgrading my wife's 3gs from ios4 to ios6. will the data associated with an app be lost or will it be restored from the backup after the upgrade completes. There is no way to export, email or even print the data contained in the app

wary about upgrading my wife's 3gs from ios4 to ios6. will the data associated with an app be lost or will it be restored from the backup after the upgrade completes. There is no way to export, email or even print the data contained in the app so I am concerned

If the backup and restore takes place properly, you shouldn't have any issue as millions of people have done an update from iOS 4.

IPad2, having problems with signal strength on WiFi?

On my iMac I have four bars signal strength. On my iPad2 I have one bar and it will not connect to the WiFi.

I have a similar problem.
(But not on Crystal Palace Tx).
Switch to a poor channel. (Dave for example. This is one I have problems with).
Go to Settings, TV Settings, Freeview Signal Strength.
Now press the Info button to get extra information.
Note the UHF channel number, the channel is being received on.
Get the same channel information, on the other Freeview receiver you have.
In my case, the UHF channels are different.
I believe, the Youview box is pre-set to receive from a transmitter (and hence a UHF channel number), determined by a post-code and/or your address details.
Because my aerial is not pointing at the main transmitter for my post code, I get poor reception because the transmitter the aerial is pointing at, transmits Dave (MUX) on another UHF channel.
As confirmed by the other freeview receivers I have.
There doesn't seem to be a way to force the box to use any other UHF channel.
Any scan always comes up with the same one.
There is no manual setting.
I might be totally wrong, but I think this is another software bug.

Problems with signal strength with channels on Mux...

I've had a YouView box (Humax first gen model) for almost a week and i'm having pixelation/signal strength problems with all channels on Mux. Com5, Pick, Dave, Movie Mix and Really etc. My Vision+ box and TV are showing these channels without any problems. Any ideas?

I have a similar problem.
(But not on Crystal Palace Tx).
Switch to a poor channel. (Dave for example. This is one I have problems with).
Go to Settings, TV Settings, Freeview Signal Strength.
Now press the Info button to get extra information.
Note the UHF channel number, the channel is being received on.
Get the same channel information, on the other Freeview receiver you have.
In my case, the UHF channels are different.
I believe, the Youview box is pre-set to receive from a transmitter (and hence a UHF channel number), determined by a post-code and/or your address details.
Because my aerial is not pointing at the main transmitter for my post code, I get poor reception because the transmitter the aerial is pointing at, transmits Dave (MUX) on another UHF channel.
As confirmed by the other freeview receivers I have.
There doesn't seem to be a way to force the box to use any other UHF channel.
Any scan always comes up with the same one.
There is no manual setting.
I might be totally wrong, but I think this is another software bug.

My quandary is how to transfer EVERYTHING from a Macbook pro that won't boot up to a new one, will the usual linking with a firewire lead still work?

I have an early intel Macbook Pro that wouldn't wake from sleep and won't now boot up, i'm just going to replace it with a new 13" i5 but i need to transfer the last five years of my life off the dead one to the new one, there's nearly 3 grand of music software and mp3's before i even think about the 10 years of photographs and videos, some of it is backed up but i ideally want to just transfer it all over.
what are my options? will linking the two together with a firewire or similar still be possible without the old one booting up (it still has power and turns on but the sleep light is constantly lit but very dim, the hard drive does sound like it's spinning up) or am I best removing the old Hard drive and putting it in an external case, would I be able to access directories and folders or could i boot up off an external drive or would there be hardware compatibility problems?
without sounding off i'd appreciate any complicated processes be explained in beginner to intermediate levels of "GEEK" i'm far from a pro but should be able to muddle through!!!
you've no idea how much any help with this will be appreciated!!!

Since the old MBP is dead the only option is to remove the hard drive and use a SATA/IDE to USB adapter to get all your stuff off the old drive.
One note though make sure you use the same user name and passord on your new MBP as you had on the old one.
As to software hopefully you have all the license information written down other wise you may have a hard time reinstalling some of it. Also be aware that OS X Lion will not run older PPC software. So if you have older programs that used Rosetta to run it will not run on Lion.
Good luck with everything.

Will the 1299 Imac with the cheapest things Run games without lag?

I am wondering if the cheapest Imac with the cheapest things on the setup will run computer games such as minecraft without lag?

Will be using it just to soley play video games. Also any rumors on when the new imac could come out soonest/ latest date
Yes it will play games just fine. Per the Terms of Use we cannot discuss future products on this forum.
You would only need antivirus software if you run MS Windows and only for the Windows partition. Because there are no viruses for OS X it's unnecessary for OS X. The good news is even if your MS Windows partition becomes totally diseased this will in no way affect OS X.
I would recommend looking through:
Mac 101
Switch 101
Find Out How Video tutorials
List of Useful URLs for switchers

Does the airport interfere with time warner modem

My roommate has an airport connected to our Time Warner modem that is for his private use. Does it cause interference to the strength of reception I'm getting from the Time Warner modem?

It's possible, and it's also possible that the Time Warner modem/router is interfering with the signal from the AirPort Express.
Most of the time though, this is not a problem, since each router will look for the best wireless channel to use and try to avoid other channels that are already in use.
What is for certain is that your Internet bandwidth, or speed, is being split between the Time Warner modem/router and the AirPort Express when both devices are operating, so all things being equal, hopefully your roommate is at least paying for his share of the monthly Internet charges.

Will the iphone work with a blackberry email server

I am about to start a new job. I was told they have a blackberry email server. Will I beable to recieve and create email using my work email address?

http://www.tipb.com/2011/05/02/rim-announces-blackberry-enterprise-server-iphone -ipad/
You would need to check with the admin of the BES if their version supports the iphone.
Good Luck on the new job.

I use iphone 4 ios 6.1. i want to buy whatsapp app buy i cant buy it cos it says the email Id is for U.S why am in Nigeria. if i created another apple id using Nigeria country, will the app work with ma iphone that already have another id to purchase app

i use iphone 4 with ios 6.1. i want to buy whatsapp app but my previous apple id is for U.S using to get free app while i live in Nigeria. if i create another id for Nigeria region to buy Whatsapp app, will it work with my iphone that already have id?

Hello Emmanuel,
It sounds like you are trying to purchase an app on your iPhone while in Nigeria. You do not need to create a new Apple ID to do this. You will just need change the iTunes Store country in your iPhone settings and update your billing information to match the country you are in:
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Will the NX3000 work with an add-on eSATA interface for data migration?

My company is migrating to the cloud from our current hosted solution which includes a PowerVault NX3000 NAS server. We need to move several TBs of files and decided to add an external eSATA enclosure and swap in multiple SATA drives for the backups.
Obviously the NX3000 doesn't have an eSATA port so we are looking at adding a PCIe interface to the NX3000 so we can attached our external enclosure. Any known reason why this plan won't work?
I can provide specs for the device parts if it will help.

I found that the match function does work - I can download purchased songs to my phone with no trouble at all. So I'm happy!

Will the nano work with...

I've been thinking of getting the nano and the iHome.
I wanted to know if they will work together.

I had never heard of iHome so I did a Google search on the name. It came up with the website that sells the unit. According to the website, compatability will come soon.
http://www.ihomeaudio.com/flash/default.asp

Will the iPhone work with the Bose SoundDock Digital Music System?

I want to get one of the new Bose SoundDocks but I'm not sure if it will work with the iPhone. I know it works with the iPod Touch but I know it's a little thinner than the iPhone. Has anyone tried using the iPhone with one of these?

There isn't an adaptor that fits the iPhone but it works flawlessly with the iPhone. In fact, it works better with the iPhone than it does with the new Classic. The new Bose SoundDock has a nifty little remote that allows you to scan foward/backward through your playlists - this functionality works on the iPhone but not on a Classic iPod.

Will the bumper interfere with signal strength

Similar Messages

Maybe you are looking for