Will the Color Stay the Same?

I exported a video I finished and when I played it on QuickTime the color was messed up, but I realized I had to enable Final Cut Studio Color compatibility and then it was fine. I'm entering the video to a film festival and I want to make sure if I submit the video on a mini-Dv the color will stay the same as FCP and not as QuickTime without Final Cut Studio Color compatibility enabled. Thanks!
I also need help with printing video to mini-DV
http://discussions.apple.com/thread.jspa?threadID=1910140&stqc=true

"If I go to buy one, would a plasma TV be suitable? "
Short answer, No.
Not in regards to true accuracy. The only way to get a true accurate representation is to view the footage on a broadcast monitor. Plasmas are designed to make the footage look as nice a possible, by adding a lot of contrast, brightness and usually warmth to the image. It will look nice - but that is not necessarily accurate. Unless you feel like tinkering in the custom setup menu with various tools to try to adjust the picture or forking over the dough for a studio plasma = $$$$$
Cheers.

Similar Messages

  • My friend is getting me an ipad 2 from us (atnt model). Will the same work in India. Do i need to get it activated by ATNT first to make it usable here?

    my friend is getting me an ipad 2 from us (atnt model). Will the same work in India. Do i need to get it activated by ATNT first to make it usable here?

    iPads are not pre-activated by the store unless you ask them to do so - but I think that they will only activate the iPad itself, I don't think that they will activate 3G on it for you. It will come with an AT&T micro-sim (which I think is already installed in the iPad but I'm not sure), but it is left to the customer to activate any 3G service that they want.
    A number of people buy the 3G iPad without ever activating 3G on it - they just want the built-in GPS functionality which the wifi-only model doesn't have (only the 3G version has a built-in GPS chip).

  • IPhoto '09 version 8.1.2:  If I permanently delete the photos in IPhoto trash, will the same duplicate photos be deleted from the Events library?

    For IPhoto '09, version 8.1.2:  If I permanently delete the photos from the IPhoto trash, will any of the duplicate photos in the IPhoto library also be deleted?

    1. There are no duplicates in iPhoto unless you imported two or more copies of the same photo
    2. If you are useing the defaults in iPhoto and delete a photo from an event and empty the iPhoto trash and the system trash all versions of the photo will be gone
    LN

  • I am totally new to app development. I have to make a simple app( sort of a to-do list). I need this app to work on mac desktops and also on ipads and iphones. I need to know how to make a GUI on a mac.will the same prog. be compatible on all 3  devices?

    what will you recommend me to learn first? i am getting acquanited with objective C language(done C++ before). but no experience of gui.

    It's possible. Just create a second target of the appropriate type and then change the "Base SDK" build setting. Then make sure to add all the necessary files. If you want to build both at the same time, create an aggregate target. So my mean you have to maintain two targets one for iPhone / iPad and Mac also....... May be it helpful to you......

  • Will the same 4S support AT&T and Verizon?

    If I buy the 4s and activate it on AT&T, can I use the same phone and switch to Verizon at a future date, or will I need to buy a phone then?

    Yes you can switch to Verizon. It's a CDMA/GSM Phone. Taking into account that you buy an unlocked phone or Verizon agrees to unlock it for you. Otherwise no use.

  • Transfer pricing between the same plant

    Our multimational client has desired, transfer pricing between the profit centres. The profit centres have been designed as a combination of product lines and plant. My first query is that whether it is possible to have Transfer pricing in the same plant, i.e. when the finished goods one material is moved & fed as raw material from one product line to another product line. How will the same be mapped in MM and PCA/ COPA??

    Suraj ,
       Could you please elaborate on that .Iam not very clear on that
    Regards
    Deepesh S

  • More than one domain in the same library?

    I use two Macs. In one I use iWeb to maintain two blogs and in the other I use iWeb to maintain two sites. I am giving one of the Macs to one of my sons and would like to use one Mac to work with both domains. Can I copy both domains to the same iWeb application support folder or will one copy over the other and destroy it? Will the same folder hold two Domain files or do I need to rename one of them? Thanks!

    To add to Roddy's post I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
    This lets me edit several sites and only republish the one I want.
    OT

  • TS1702 I am updating my IPAD to version 5.1 and the update has stopped before completion. What is the procedure. If I stop the update or restart the IPAD will the update be corrupted and also the IPAD operating system.

    I am updating a new IPAD to the latest version from ITUNES. The update is not complete and has stopped. What  is the procedure to restart? If I close ITUNES i get a message that the IPAD is updating. Will closing the application cause the update to be corrupted and thus the operating system? Will the same occur if I power the IPAD down or disconnect it vis the USB port?
    Help!!!

    routnom wrote:
    AppleWill - when i closed the app and restarted Itunes, I had to go thru a Restore process. The restore goes to certain point and stops. It seems at the same time as the Update stopped. I can Force a stop and reboot the computer and try again. It possible the screensaver interrupted the restore? It doesn't sound right. Any suggestions?
    You may also want to go to:
    ~/Library/iTunes/
    This is done by  going to the "Go" in the Finder and select Go To Folder. Copy and paste:
    ~/Library/iTunes/
    In to Go To Folder selection. Look for a folder called iPad Software Updates. Delete anything in that folder and re download the upadate.

  • MacBook Pro 3,1 - Firewire Bus(ses?), 400 & 800 at the same time

    Hi All,
    I'm using an RME Fireface 800, which is a FW800 audio interface, but I also have a Maxtor FW400 hard drive.
    I know if I daisy-chain the hard drive off the audio interface, then I will drop the bus speed to 400 Mbit/s, but will the same happen if I plug the hard drive into the FW400 port?
    I know if I plug something into the FW400 port on my iMac this happens, so everything there is Firewire 800. Should I aim for the same with my MacBook Pro?
    Cheers,
    Alex

    buy something like this:
    http://www.siig.com/ViewProduct.aspx?pn=NN-EC2012-S1
    they make all different kinds (FW 400, 800, etc.)
    plug your camera in either that adapter or your internal FW port
    plug your FW drive into the other
    capture your video to the EXTERNAL drive.
    edit your footage.
    you don't say what software you are editing in (FCP, iMovie)

  • Loading the same native Libaries in different Applets doesnt work !

    The problem is the following :
    I have applet_1 that does System.loadLibary("mydll")
    and i have applet_2 that does System.loadLibary("mydll")
    both calls are static but it doesnt matter.
    When i call applet_1 first in my browser it can do anything it wants (function calling in dll etc).
    When i call applet_2 after that in my browser, it doesnt load the libary, nothing happends - no exception thrown it just doesnt happend anything. The applet works fine but cant do any method calling to the dll.
    The same happends if i open applet_2 first and after that applet_1 suffer the same problems that it cant call any dll methods, unless i close the browser.
    So, the first applet that loads the libary is the only one who is able to call methods within the dll.
    Further observation is, i made a simple class that only loads the libary, i set an int to 1 when the libary is loaded, however when the other applet calls that class the int is NOT 1 anymore, it has its initally value which leads me to believe that every applet in the java plugin has its own virtual machine.
    I found this thread, it has the very same problem. However i didnt find anything about the bug 4299094.
    http://forum.java.sun.com/thread.jsp?forum=30&thread=33843
    Any ideas what i could do to solve this problem ? When i copy the dll and rename it to mydll2 i can use mydll in applet_1 and mydll2 in applet_2.
    Regards

    Further notice :
    I put both applet classes into one jar after i read about the Class Loader Issues in the documentation of the java plugin.
    "Class Loader Issues
    Prior to version 1.3.1_01a, Java Plug-in would use a single class loader to load multiple applets during a browser session. This practice allowed the multiple applets to share information with each other through static variables.
    In order to maximize compatibility with the Java virtual machines embedded in Microsoft Internet Explorer browsers, beginning with version 1.3.1_01a Java Plug-in uses separate class loaders for applets that differ in their codebase and/or the value of the ARCHIVE parameter in the APPLET tags that invoke the applets. Only if two or more applets share the same codebase and have the same value for their ARCHIVE parameter will the same class loader be used.
    Applets that rely explicitly on the old Java Plug-in behavior with respect to class loaders may be incompatible with the new Java Plug-in. That is, applets that rely on the ability to share information afforded by a single class loader may fail to work properly if the new Java Plug-in uses separate class loaders for each applet. If this compatibility issue applies to your applets, you can force Java Plug-in to use a single class loader for multiple applets by simply ensuring that all applets have the same codebase and that the APPLET tags used to launch the applets each has the same value for the ARCHIVE parameter. "
    Both applets now can load the libary but ONLY if executed in the SAME window, if i open a new window and load applet_1 or applet_2 the libary cant be loaded in the NEW window. It will still work flawless in the old window for applet_1 and applet_2 but in the new window applet_1 and applet_2 dont work.

  • Images Change Colors between monitors while the UI stays the same

    Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
    - BD

    Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
    1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
         Things I'm not sure about:
              a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
              b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
              c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
    2. Set Firefox to color manage (easy enough)
    3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
    3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
    4. Make paintings, have fun.
    Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
    - Brendavid

  • I am trying to create a button in flash that will display 4 separate images at the same time when clicked.  I can't get the images to stay on when I take the mouse of the button.  I need the actions script code to make this happen.

    I am trying to create a button in flash that will allow the user to click on the button and 4 separate images show up at the same time.  I can get the images to appear when I click the button but they will not stay on the screen.  I need to know what code I use to make the images stay once the button is clicked, then I need to know exactly where I place that code.  It does not appear to be possible to add the action code to the buttons layer since each time I add a new layer I just get another "up" "over" "down" and "hit" line.
    Thank you in advance
    AP

    It is not clear how you are trying to realize this from your description.  If you are trying to create this within a button symbol it will not work.  Explain your approach and if there is code involved, show what you have so far.

  • Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

    Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot.  I have to shut the computer down the hard way!  when it comes back up, it is still either frozen or slow.  I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix.  It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything.  My iPhone and iPad are not effected as much so I end up doing what I can with them.  I've seen the blogs out there and understand that many have the same problem.  I have been waiting to read about a fix but I have found nothing!  Any ideas?

    Not enough free space on the startup disk can slow the system down.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    For startup issues...  open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
    And disable the Lion "resume" feature.
    Open System Preferences > General
    Deselect:   Restore windows when quitting and re-opening apps
    And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

  • Color and style settings won't stay the same.....

    I'm trying to get my type to stay the same color and style each time I start a new email to send to someone. I can set it each time I start a new message, but I want it to stay the same automatically when I open it up. Is that possible to do in mail?
    1.6 GHz PowerPC G5   Mac OS X (10.3.9)  

    Hi,
    I have had this problem.
    It seems that iChat is more sensitive to small breaks in the network link. Web Browsers and Mail just don't show them as they make new connections each time they download mail or change pages.
    If wireless try it wired for elimination purposes.
    Check the time any DHCP server renews the leases.
    8:49 PM Monday; February 26, 2007

  • My iPod 5 screen is black the camera will make the clicking sound when pushing the home button and sleep button at the same time but the s teen stays black !! I hope someone can help

    I have an iPod 5.  The screen is black, I tried charging it.  It makes a bing when I plug it in so power is going to it.  When I hold the sleep button and home button to use the camera it takes a pic although the screen stays black the sound is there.  I hope someone can help me !!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

Maybe you are looking for

  • SpryValidation and DependentDropdown in the same page

    hi, With "SpryValidation" and "DependentDropdown" in the same page SpryValidation, on "Submit" event, doesn't work Any solution?? Thanks Gabriele

  • Making & Burning Slideshow using 'slideshow' at bottom of iPhoto Library?

    Hello. I would appreciate if someone can help me from beginning to finished product of making a slideshow using for example the Snapshot effect and music from iTunes. I will go over in point form to the point where I am unable to proceed any further:

  • Switch CSS while editing page to print media

    My site uses media:print CSS which gives a totally different layout to a page (including revealing some hidden DIVS). My users are editing with Macromedia Contribute 3. Is it possible to switch the view to show the print css (media:print) while editi

  • Finder moving files not copying

    I have been using a mac for over 15 years but this one has me stumped. When coping files I have always held down 'option' to copy the file. A small green plus symbol appears and the files then copy into the target folder, or hard drive. I have a Mac

  • About Final Object

    Its possible to change the state of a final object . What is the idea behind this .. ? I am disturbed by this fact ..can any one tell me why? public class FinalTest      public static void main(String args[])           final MyFinal a = new MyFinal()