Will the dock keyboard for first generation iPad work with iPad third generation?

Will the dock keyboard for first generation work with the new iPad third generation?

It should, which is based only on the fact that the connections are remaining the same (the 30 pin usb connection)
that said, the 3 is thinner and smaller than the first one, so if it's dependant on a tight fit it may not work exactly like it does on the 1.

Similar Messages

Will my first gen macbook work with ipad 2's face time?

will my first gen macbook work with ipad 2's face time?

As an update, I bought the WNDR3400v2 router and am supremely disappointed with its lack of power - but - the Lenovo W510 DOES work perfectly fine connecting to both the 2.4Ghz and 5Ghz radios.
The problem is the signal strength only twenty feet away up one floor is dismal (as compared to what it was with the ancient Linksys WRT54G for example).
What bothers me is that Netgear goes to great lengths to hide the power output of the radio so I 'suspect' that it is anemic and I don't (yet anyway) suspect the radio on the W510 laptop. Netgear support would only tell me the EIRP at 2.4GHz is 20dBm, and at 5GHz it's double that. So I can only assume the power output from that. If I assume a 5dBi antenna gain for both frequencies, that results in a power output guesstimate of 15dBm (32mW) at 2.4GHz and double that at, i.e., 18dBm or 64mW, at 5GHz.
The other side of the equation, of course, is the power & gain of the W510 radio & antenna.
Do we have specs for the W510 power output & antenna gain (e.g., a typical laptop is about 50mW (roughly 15 to 18 dBm) pushed into an antenna with a gain of about 1/2 dBi to about 1 dBi at best, regardless of what the specification sheet intimates)?

Will the HP LaserJet P2035 Monochrome Laser Printer work with the I mac

will the HP LaserJet P2035 Monochrome Laser Printer work with the I mac

If you need any specifications on the printer I would suggest visiting this link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodType Id=18972&prodSeriesId=3662025&lang=en&cc=us
You can find drivers, user guides, and all kinds of data at that site to determine if it will work right for you.
Hope this helps!
I work with HP

Will the at&t version of iphone 5 work with t-mobile?

Will the at&t version of iphone 5 work with t-mobile? As I have a t-mobile prepaid plan and I really wanna buy it!!!
And will t-mobile provide me with a nano-sim?

Yes, but the officially unlocked iPhone is not available for sale in the US, at present. T-Mobile will have nano sim cards & they are advertising that iPhone 5 owners switch to their service.

HT3310 what wireless headphones will work with a third generation ipod?

What wireless headphones will work with a third generation ipod classic?

The third generation iPod classic does not support BT.
If you meant the 3G iPod touch thenyou need a pair that supports:
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
iOS: Supported Bluetooth profiles

Will the mini display port to vga adapter work with a 2007 mac book?

will the mini display port to vga adapter work with a 2007 mac book?

I think your Macbook came with a Mini DVI port instead of a Mini Display port.

Will the Logitech Tablet Keyboard for Android 3.0+ work with the Playbook 2.0 OS?

Thinking of buying the Logitech Tablet Keyboard for Android 3.0+ for my Playbook but before I do I want to make sure it'll work with my Playbook with the new 2.0. Can anyone help?

Hi Patrick,
short storry: you can not setup Sun VDI 3 that way.
Long story: Sun VDI 3 takes advantage of the VBox webservice to register, startup, poweroff, etc. VMs. The configuration and startup of the webservice is handled via a VBox installation script/installer that is bundled with Sun VDI 3 (and this installer is available for Solaris 10 only). Furthermore, we require a specific VBox version, because the VBox API has changed incompatible between 2.0.x, 2.1.x, 2.2.x, etc. - Sun VDI 3 currently supports 2.0.8. Thus any VBox VMs created with 2.1 or 2.2 will not run in a Sun VDI 3 environment.
The typical Sun VDI 3 setup requires that the core and VBox parts are installed on a Solaris 10 machine (either both on the same machine or separate ones). For both the core and the vbox parts we provide a corresponding installer available via the Sun VDI 3 download page. Furthermore, you also need another machine for the ZFS/iSCSI storage part (e.g. running OpenSolaris). Please refer to the Sun VDI 3 documentation for all the details and background.
You can still install VBox also on a laptop with your preferred OS and use this setup for example for preparing your VMs that should later be imported and executed in a Sun VDI 3 environment. However, as stated this requires the VBox 2.0.8 version (there is a link on the Sun VDI 3 download page pointing to the compatible VBox versions for other OS).
- Klaus

Will the Apple mini DVI to video adapter work with a macbook? What to Buy?

I went to my local Apple Reseller and asked for a mini dvi to video adapter to use to connect my macbook to a tv using either s-video or the yellow RCA cable. I was told that they only had the one that was for an ibook and Power book and that this would not work with a Macbook. I would need a different one. Is this correct. If so, what do I need? I have looked on the online Apple Store and cannot find anything that fits this description. They only list one type of Mini DVI to tv adapter? I just want to be able to connect my Macbook to a TV.

As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
ted.h.
Mac Mini (Pro Duo) and MacBook (C2D) Mac OS X (10.4.8)

Will the m-audio project mix i/o work with Logic X?

Hi,
I have a m-audio project mix i/o interface/control surface.
Will this work with Logic X?
Thanks,
Mike

If it works now on 10.8.4, then yes. This depends on OS X and drivers (if needed), not on Logic. Logic can only 'see' hardware that the OS can see.

Will the mid-04 AGP 2.5 DP work with PCI-X graphics (ati radeon 7000?)

Got a G5 with a burnt out AGP slot, will it work with this? ---->http://www.ebay.com/itm/Apple-Mac-G4-G5-ATI-Radeon-7000-PCI-64MB-Video-Card-DVI- VGA-S-Video-TV-Out-OS9-/200710223413#vi-content

Okay now is there any possible fix? I just turned it on and it the display came up just fine. But then I tried to boot it off of my powerbook from firewire and no show.I don't have it screwed down because I have been swapping cards but should I try that or are there any other suggestions?

Will the Sound Blaster Audigy 2 drive bay work with Audigy 2 ZS car

As above,
can the Audigy 2 dri've bay be used with the Audugy 2 ZS and if so, can everything on it be used?.
Are all the connections and functions the same on both dri've bays(Audigy 2, Audigy 2 ZS)?

Yes, they should work with eachother, but it is not officially supported.
Cat

Why does the default theme for firefox 4 only work with add-ons such as personas? It will allow me to preview an alternative theme with a persona but won't let me apply it without switching to the default. No option for disabled and visually impaired.

Firefox 4 will no longer allow me to use a theme (other than the default) with a Persona. When I "try on" a skin, FF4 allows me to ''preview'' the theme with the persona but will not allow me to ''apply'' the persona without '''automatically''' switching my chosen theme (disorganizing my menu's, bookmarks, and tool-bars) back to the default. Firefox 4 also begins to load an all-default setting browser when it is first opened slowing my browsing start up. All issues were not experienced before the Mozilla Firefox 4.0 upgrade.
*Windows Vista Home Basic
*Google Toolbar
*Shown Menu Bar

Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]]

When will the photogene issue be resolved? Doesnt work with photostream.

Photo gene edited pbotos willnot transfer to pboto stream. Photogene says its Apple's problem in IOS 8.1.2. When will this be fixed?????

Thanks Gail. Unfortunately Phtotgene will not respond. All they have is a bulletin on their website that the problem was caused by Apples latest release 8.1.2 and a workaround solution to use in the meantime. Its a real pain. I use photogene daily in my family history research. I had the impression that Apple caused the poblem and therefore would fix it. From my perspective since Apple hand picks their Apps they have a respsibility to make sure it gets fixed for the sake of their users. So as they point the fingers at each other we the users suffer. Thankyou for wieghing in on this. Your truly
Roy

Will the 3300 I Trigue 2.1 3300 Work with An mp3 Player

I am ordering the 3300 ITrigue and I don'tk now if I can set it up with an mp3 player or not. I know in back of it the subwofer only has an output not and input....if there is a way could someone let me know thatnks Denny

Denny,
There's only input jack for connection to audio source from the subwoofer. If you're purchasing this speaker mainly for connection to your MP3 player then it should be fine but if you're planning to input additional audio source to the speaker such as to a computer then you may need to get a stereo splitter adaptor so that you can connect both the computer and MP3 player together to the speaker.
There's a copy of the startup manual guide for the speaker at the Product Documentation page which you can download for reference.
Jason
Message Edited by Jason-CL on 03-23-2006 10:13 AM

Will an armband designed for an iPod touch work with my iPhone 4S?

The subject line says it all, really. For example, I am looking at one that says it is for the iPod touch 2G, and another one that says it is for the iPod touch 4G.

Unless you already own the armband, it may or may not. My experience has been it won't work, so get one that's designed for the iPhone.

Will the dock keyboard for first generation iPad work with iPad third generation?

Similar Messages

Maybe you are looking for