Will the ex emulator work in windows 7(32bit) on a bootcamp iMac?

I have an intel iMac (Snow Leapard) running Windows 7 (32bit) using the bootcamp partition.
Microsoft has an XP emulator that will run on Windows 7.
My concern are the drivers for the emulator.
Bootcamp has translation drivers that allow a Windows OS to run using Mac drivers.
Has anyone done this?
Run the xp emulator on a Windows 7 (32bit) iMac using bootcamp?

of you by emulator mean virtual machine then virtual machines are virtual so they don't have direct hardware access and therefore does not require drivers provided by the user

Similar Messages

  • Will the Linksys WRT160N work with windows vista at all?

    Will the Linksys WRT160N work with windows vista at all? 
    Some one please clear this up for me, it could be answered in the simplestterms from the English Language of course.
    I've recently purchased the Linksys WRT160N however after purchase "of course"I manage to find reviews stating that the router will not work with the WindowsVista Premium, or windows Vista for that matter.
    E.g.(Comments like These 'which are not my own')----------
    "When I tried it with a new computer running Vista 64, it would install but the Linksys System Advisor would not. After 1 chat and 4 phone calls with support the system will still not run." 
     "It is a good product with XP, but if you use Vista 64 good luck. After several hours of working to get it running my patience and options have run out."
     "It has taken almost a week for us to figure out that the Linksys Router, WRT160N from Best Buy does not workwith Vista Premium. I looked on-line to Linksys Website and discovered that the router, WRT160N is notsupported for Vista users. .." 
    E.g. (CommentContradicting to what has been said above)------
    "Bought this to replace my outdated Linksys (new Vista laptop) and was blown away. Thisthing practically set itself up. It replaced the wired router and wireless routers I was using, asthe signal strength is awesome. I'm still pulling over 5meg ... "
    So I guess one could see why I am confused, based on the 2 sidedcontradictions pertaining to this router actually working with windows vista ornot.
    So can someone respond (preferable a Vista User) and tell me the truth as of towhat this router can an cannot do in terms of Vista? Thanks 

    It should work with vista without any issues if you are running any software on the computers (64 bit) from linksys it may not work but if you will connect that computer with an ethernet to the router it should work fine.

  • Will the deskjet 1010 work with windows 10?

    I'm going to upgrade to Windows 10, just checking to see if my Deskjet 1010 is going to go there with me. Currently running this on Windows 7. The Deskjet 1010 is perfect for the little bit of printing I do, I don't want to change printers if I don't have to.

    Hi, Thank you for posting in the HP Support Forum. As mentioned here :  Most applications and hardware drivers designed for Windows 7 or later should work with Windows 10 Windows 10 is not officially released yet. Unless officially released drivers, no official support is present. At the moment, no official guarantee can be provided. However, I am sure it will work properly. Windows 10 should recognise it automatically.

  • Will the purchased CS6 work on Windows Vista if the trial does?

    Hi,
    I have downloaded the Adobe CS6 Design and Web Premium trial and I'm running Windows Vista. The product infomation does not include Vista in the system requirements for this program but the trial still seams to work perfectly anyway. I just want to check if I purchase the program, will it still run on Vista just as well as the trial does?
    Thanks!

    The only difference between the trial version and the purchased version is that it will be activated with your serial number.  You will not even have to reinstall it.
    So we could say that if the trial works well, then the activated version will also.

  • Will the New iTunes 11 for Windows work on Windows 98???

    Will the New iTunes 11 for Windows work on Windows 98???
    A. True.
    B. False.

    My opinion is no. Apple has no plans updating version 11 to meet the needs of Windows 98 being that #1 - Windows is pushing forward with their Windows 8 operating system launching in a week and iTunes 11 would have needed to be re-written from scratch to accomodate the Windows 7 and Windows 8 systems. It is a known issue that iTunes is bloated and most Windows users will use other media players to manage their music rather than iTunes. #2, Windows 98 is so old that even Windows does not recommend anyone using anything past XP as you are exposing your PC to viruses or anything that no longer can be patched. I highly recommend upgrading to atleast to Windows 7 and this is of course if your PC matches the bare minimum of hardware to use iTunes 10.7 and 11. You are actually doing more harm than good by using an outdated OS.

  • Can the wireless printer work with window 7?

    can the wireless printer work with window 7?

    Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

  • Will photoshop elements 9 work on windows 8?

    will PS elements 9 work on windows 8?

    Usually programs that run on windows XP will run on Windows 7. The best way to find out is to install and see.

  • Will LabVIEW 8.0 work with Windows 7?

    Will LabVIEW 8.0 work with Windows 7?
    Thanks in advance.

    According to this kb, LV2009 is the first version to be supported in Windows 7.  We have had problems getting LabVIEW 8.6 to just install in Windows 7 machines.  You might be able to get it to work, but I would recommend upgrading your version of LabVIEW if you really need to use Windows 7.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Will Photoshop 7.0 work under Windows 7?

    Will Photoshop 7.0 work under Windows 7?

    To get Photoshop 7.0 (or 7.0.1 in my case) to work under Windows 7 64-bit, I ran the CD's Autorun under Windows XP service pack 2 compatibility. I also set the same compatibility prefs in Win 7 for the setup.exe file in the Photoshop directory of the CD-ROM.
    You'll possibly encounter an error about the scratch disk being full - this is because PS 7 fails to understand big hard drives (the huge free space number looks like an empty disk, it's kinda like a Y2K problem, since PS7 programmers or the API writers never imagined so much free space, I guess). In this case, two things are important:
    You need a partition that's less than 1TB (not sure about the size, it's in another thread) for the scratch disk. I used my system's recovery partition (only 2GB free, however). Other advice I found was to create a scratch partition using Windows 7 partitioning. Maybe a USB key would work? Surely not very fast...
    PS 7 will fail on startup with the "scratch disk full" error and exit. To get PS 7 to allow you to specify it, hold down CTRL and ALT when the program is launching. You'll be given a chance to indicate the partitions.

  • Will hp officejetpro 6830 work with windows 10?

    will hp officejetpro 6830 work with windows 10?

    Windows 10 is still in th pre-release stage and it is not published yet what will be supported, I expect this will happen in the next month as the July 29 release nears.  HP's site here will have compatibility information, check back in late July for information. That said, I would expect that current printers will be suported in Windows 10.  The current public Windows 10 Build 10130 does have a Fax driver for the Officejet Pro 6830 and print drivers that would be compatible as well. 

  • Will Acrobat 9 Standard work on Windows 8.1

    Will Acrobat 9 Standard work on Windows 8.1?

    It may, but you might expect potential problems with the print driver and such, even if Acrobat and Distiller work. I do not remember anyone reporting on AA9 with Win8.1, so only trying it will let you know for sure. Also, be sure you let us know of any issues and/or success if you try it.

  • After the most recent firefox update I can no longer copy and paste. the fuinction only works in Windows and I HATE usign it. Any suggestions on how to restore the copy and paste function while using Mozilla?

    I have been unable to use the copy and past command while using mozilla. the fucntion does work in windows IE, but I don't want to use windows. How do I restore or fix this function? I varies, works some days and not others.

    See http://kb.mozillazine.org/Clipboard_not_working
    Try to use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete

  • Will my ipod classic work with windows 8

    I am finally updating my Windows XP desktop to a Windows 8 laptop.  Will my ipod classic work with Windows 8?  I've seen a ton of problems from other users with regard to compatibility.

    Do yourself a big favor. Switch to Windows 7. (Or buy a Mac.)

  • Does the iPod Mini Work with Windows?

    I am thinking of buying an iPod mini but I don't have an Apple computer. Does the iPod mini work with Windows efficiently? Thanks....

    Hello Ian,
    Can you be really specific about the necessary Windows XP updates needed? I run XP Pro on a rather new computer and just got an IPOD mini. I'm ready to tear my hair out because iTunes seems to crash my computer every time I change one CD for another. iTunes runs REALLY, REALLY slow for me. Also read on the board that iTunes 6.0 and the mini don't work well together. True or not true?
    Thanks - Genevieve

  • I have just shifted to India where the voltage is 220V vs 110V used in US. will the apple tv work directly or do i need a step down convertor to use it?- tks sahil

    have just shifted to India where the voltage is 220V vs 110V used in US. will the apple tv work directly or do i need a step down convertor to use it?- tks sahil

    You only need a plug adaptor as long as the voltage is between 100 and 240 volts.
    (123957)

Maybe you are looking for

  • Edge Animate CC crashes on right-click on any Object in Elements window

    Hi, Every time I right click on an Object in Elements window Animate crashes on me. Same thing happens, when i click on the "Open Actions" Button - "{ }" I really would apreciate some kind of help with this problem, since I am able to accomplish noth

  • Can I reschedule Early Watch Report's generation schedule?

    Dear gurus,     There is a backgroud job running in our ECC PRD system. It gathered the performance data and sent it to SAP. SAP will generate Early Watch Report for(EWA) me every week.     Now my question is:  Can I reschedule the EWA generation per

  • Windows XP won't load on MS-6380E

    I built the following system: MS-6380E Rev. 1.0 MB - (Bios Ver. 5.5) AMD XP 2100+ 512Meg Unbuffered, non-ecc PC2700 RAM Maxtor 13Gig IDE hard drive on Primary IDE Hitachi CDR-8335 CDRom on Secondary IDE When I attempt to install WindowsXP, it never r

  • Help finding deleting Photostream photos!!

    A few weeks ago I manually deleted most of my Photostream on my iPhone 5S from the late spring/summer so I could make room on my phone for ios8...I thought a copy of the photos in my Photostream would be saved in the cloud. Big mistake. That's not ho

  • WAP321 Dropping Connection since firmware Upgrade

    MyWAP321 is dropping connections at least once a day since upgradiing to firmware 1.0.1.10. before the upgrade I had no problems and I have another WAP321 with firmware 1.0.0.3 that never drops connection. Is anybody else having this problem since up