Will the ipad power adaptor work with ipod

Will the iPad 10 watt USB power adaptor that comes in the box work safely with a an iPod Touch (4th generation)?

angiefromclapham wrote:
Will the iPad 10 watt USB power adaptor that comes in the box work safely with a an iPod Touch (4th generation)?
Yes it will.
Stedman

Similar Messages

  • Will This Creative Power Supply Work With The Apple iPod Ser

    I am going on a trip and i am incharge of mp3 players and charging unfortunately i am the only one who has a Zen and every one else has an iPod so.... will this Creative Power Adaptor Work with all/some iPods Thx wbnghiMessage Edited by wbnghi on 06--200709:36 AM

    I've never used an iPod, but don't they charge through their docks?
    I doubt if it would work- very few Mac products are designed to be compatible with PC devices.

  • Do both of Apple Store's iPod power adaptors work with the new Touch 2G?

    Hi,
    Many thanks in advance for your attention.
    Looking to to get an Apple USB power adaptor for the iPod Touch 2G.
    In the Apple Store, two are listed, one smaller (and newer) than the other. In the newer one, the prongs are not retractable; in the larger (older) one, they are.
    1. Does anyone know if the larger (and older) power adaptor works with the iPod Touch 2G USB-only interface?
    2. I know that many power adaptors and speakers and car adaptor sets, etc. in the past had a combo Firewire/ USB power interface. That is why the new iPod Touch 2G (or iPhone 3G) does not charge up or power up with these speakers and chargers, etc. (Speakers such as the original Bose Sound Dock).
    3. Is it true that the older (larger) power adaptor works better in all kinds of power situations (different outlets, etc. in different countries); that the older (larger) power adaptor is more travel-versatile? The Apple store perhaps notes a difference, noting that the newer power adaptor works only with USA-style outlets. I see no such note with the older adaptor.
    4. Finally, does anyone know of a USB-only interface that would work with the iPod Touch 2G that is not Apple's (and perhaps not as insanely priced)?

    Many thanks for further clarifying.
    I don't know 100% for sure that the Apple USB cable for the iPod Touch is different than the Apple USB cable for the iPod Touch 2G.
    But:
    I have read (somewhere) that the tiny pin connectors are different. That is why an iPod Touch 1G could be charged by (for example) a Logitech mm50 Speaker set and an iPod Touch 2G cannot.
    An iPod Touch 2G can still connect to the Logitech mm50 Speaker set. It will still play and you will hear music. But it is no longer charging. And I have read of iPod Touch 2Gs getting very hot in these cradles. That can't be good for the poor iPod in the long run.
    So for the Apple USB power adaptors to work, (which both came out before the iPod Touch 2G), they must have some override or blocked pin if they can work with both generations of iPod Touches.

  • I have interface M Audio firewire 400 new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system? Thanks so much

    I have interface M Audio  400 with 400 firewire new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system or do I need new software? Thanks so much

    If you have a little Firewire adaptor, everything should work fine. It does on my system.

  • Will the lightning USB adapter work with regular USB jump drives?

    Will the lightning USB adapter work with regular USB jump drives?

    Not really.
    Technically, with some USB drives (I've had a 50% success rate) you can import photos or videos off the drive - thi those photos or video follow a very strict naming convention.
    But you cannot import anything but photos or video and there is zero support to write off the iPad to the flash drive....so while it technically may work, it's so limited to effectively not work.

  • Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapte

    Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapter and the new MacBook Pro?
    Apple Store says it is for the 30" only.
    Thanks ... Ken

    I'm not so sure about that. I'd say the jury's still out until someone gets one and tries to use it single-link.

  • Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

    Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

    Click on this link for the fix http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

  • Will the motorola H620 Bluetooth work with the Iphone 5?

    Will the motorola H620 Bluetooth work with the Iphone 5?

    if it support any of the following bluetooth profiles
    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

  • Is the USB Power Adapter compatible with iPod touch 3rd Generation?

    Is the USB Power Adapter compatible with iPod touch 3rd generation?
    (http://store.apple.com/us/product/MB352LL/B?fnode=MTY1NDA4NA&mco=MTM3NDk1MjI)
    The specs of the Adapter ("This accessory is compatible with the following:" in the "Overview" section) don't mention iPod touch 3rd generation. They do mention 1st and 2nd Generation
    Thanks!

    Thank you, Lyssa.
    You must be right based on that article (http://support.apple.com/kb/HT1353). The latest model of iPod touch is referred to as "iPod touch (Late 2009)" -- and NOT "iPod touch 3rd generation", as I erroneously assumed.
    That completely answers my question about the USB power adapter.

  • Will the new Iphone 3Gs work with Iphone 3G accessories?

    So I have an Iphone 3G and of course I'm ready to upgrade to the 3Gs.
    However, I have a car charger and the Video component cables for my 3G. Will these work with the 3Gs?

    Your car charger and the video component cables for your 3G should continue to work. The reason some of the car chargers that worked with the first generation iPhone didn't work with the iPhone 3G is Apple removed the firewire pins from the dock connector with the iPhone 3G. A number of car chargers charged via firewire, not USB. The first generation iPhone supports charging via firewire, which is not supported with the iPhone 3G, and will no longer be supported with any future iPhone or iPod models.

  • Is the iPad power adapter interchangable with iPhone adapter?

    Is the iPhone power adapter(5s) interchangeable with the iPad power adapter, both use the lightening connector.

    The short answer is yes.
    You can use the iPad adapter with the iPhone.
    iPad requires more power.
    If you use the iPhone adapter for the iPad, it will charge but just very very slowly.

  • Will the 10W Apple Charger work with my iPad Mini

    Hello Everyone
    I got a ipad mini for christmas and because the lightening cable and 5W charger don't reach because i have only got one socket accesible in my living room i was thinking about buying the 10W Charger from Western Computers in Cheltnam, Gloucestershire And I Have a few questions about it because it does not tell me on the website which devices it is compatible with my following questions are
    Will It work with my ipad mini?
    Will it charge my iPad Mini Quicker?
    Will it be compatible with the lightening cable my ipad comes with or will i have to get a adapter of some sort?
    Please can someone answer my questions and reply because i do not want to wast my £25.00

    The 10W charger will work on all of Apple's iDevices. It will charge your Mini faster.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Will the 10 watt charger work with the iPad mini

    I hate how long it takes to charge my iPad mini with the 5 watt charger, so I bought a 10 watt iPad charger online.  It charges my iPhone 5 but not the iPad mini.  The mini recognized it, but it says "not charging"  Did I just get a bum charger (only paid $3.50 on Amazon), or should I try the new 12 watt iPad charger? 

    Yes I would but only a  genuine Apple product ,you have no idea of the
    quality of a $3.50 charger although you could have guessed
    A genuine Apple 10 w will be fine but 12w better and is approved for all
    iOS products

  • Will the new 8Gb nano work with these speakers?

    I bought a set of intempo speakers last year for my first generation 1Gb nano. I bought the new 8Gb nano last week and want to know if it will work with them. The manufacturers website with technical specs is below,
    http://www.intempodigital.com/ids01.htm

    The new nano comes packaged with it's own 'dock adaptor'. It's a #13 dock adaptor in case you're interested.
    I don't have the speakers you mentioned, but I have an iPod hi-fi and I removed the dock for my 30GB 5G iPod and inserted the #13 dock for the new nano and it is a very nice fit- the click wheel sort of disappears in the hollow of the dock a little- but other than that it fits well and the nano doesn't wobble around at all.
    The new nano fits fine on my iPod hi-fi- it sits in almost perfectly upright on the connector. It looks like it should tilt back a little when you look at the angle of the connector on the speaker. Maybe try holding the nano very upright- it doesn't need to be forced on. Took me a few turns to get the angle correct.
    Good luck.

  • Will the Bedford PowerSynch case work with iTunes on a Windows machine?

    Will the Bedford PowerSynch work with iTunes on a Windows machine vs using a Mac?

    Do you mean the Bretford PowerSync cart or tray for iPads and iPods? If so, Bretford's web site lists only Mac OS X. You'll have to contact Bretford and ask if there's a workaround for Windows, or any plans to add Windows compatibility.
    Regards.

Maybe you are looking for

  • Need help to resolve the Date time issue(Urgent)

    Hello All, I am running simple code as follows, to get the date and time. getting difference in 2 environment. Our both environment of AIX. import java.io.PrintStream; import java.util.Calendar; public class DateTest public DateTest() public static v

  • Key figure routine in update rules

    I have a Cube (X) that gets data from a ODS (A) but one of the key figures gets the data from another ODS (B) with a routine in update rules and I want to change it to ODS (C) A (All objects except one) - X (All objects except one) B (0DEB_CRE_LC) -

  • How to map import process for items

    Dear All, can anyone guide me how to map import process for items for our customer what i understand is this process in B one Raise PO GRPO Landed Cost AP Invoice I want to know whether this is correct. Also in this process their are clearing agents

  • Download into excel file

    Dear experts, While iam downloading the data into .xls file iam getting one extra emptly column. How can i avoid it? Thanks in advance kaki

  • Program freeze during while loop operation

    Dear all. I have a program that controls mass flow controller and LabJack data acquistion unit and I have a difficulty in fixing a program bug that cause while loop freeze after certain period time(about 1-10 hours after run start). Basically, the pr