Will the iPhone 6.1.3 update slow down my iPhone 4?

I've been a little reluctant to update my iPhone 4 from ios 5.0.1 to 6.1.3 because I'm worried that it will severely slow down my phone. I had this problem happen to me before with my iPhone 3. Every time I updated the softwear, my phone got slower and slower. I like some of the new features of the recent updates to the iPhone softwear, but I'm just afraid that it will make the phone slower than it already is.
I'd love to get the new iPhone 5, but I recently lost my job and just can't afford it.
Thanks, Paul

vhj wrote:
Don't update it, You will end up with poor battery life and bricked wifi like everyone else.
Sorry, but I disagree with your post. I have 4 iPhones in my household and none of them have poor battery life and the wifi is working on all 4 of the, so that shoots your theory out of the water, unless I don't count as part of "everyone else".

Similar Messages

HT6058 Will this new update slow down my iphone 4 even more than the last update?

Will this new update slow down my iphone 4 even more than the last update?

Thats a hard question to answer. The iPhone 4 has older technology than newer models which can cause the device to lag. Depending on what data and settings you have on the device, it could run slower. I would probably make sure to constantly close apps in multitasking and possible think about restoring the device as a new device. Make sure to backup your data prior to the restore

Will updating my iPhone from iOS 7 to iOS 8 slow down my iPhone?

Will updating my iPhone from iOS 7 to iOS 8 slow down my iPhone? Ive heard and seen in many videos on youtube that updating an iPhone 4s to iOS 8 slows down it...Can anybody help me to figure out the the true?

kerimlawrence wrote:
how to downgrade my iphone 4s from ios 7 to ios 6 ...
Downgrading is not Supported by Apple.
kerimlawrence wrote:
. because my ios 7 does not want to activate
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?
Also, I have the 08 version of iWork. Will this cause problems for the update? Can I update this AFTER I update the processor?

Welcome to Apple Support Communities
There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

Will the new os7 be downloaded to my ipad3 and iphone 4 when I update next fall?

Will the new os7 be downloaded to my ipad3 and iphone 4 when I update next fall?

The download is not automatic. You have to choose to download.
http://www.apple.com/pr/library/2013/06/10Apple-Unveils-iOS-7.html
 Cheers, Tom

HT4623 will the ipad 1st generation take updates past ios 5.1.1? i have not been able to update to ios 6.

Will the 1st generation Ipad take updates past ios 5.1.1? I have not been able to update to ios 6.

5.1.1 is the highest for the first generation iPad.

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

My phone i disabled.when i connected it to the pc to restore and update it..my iphone after 5 mins goes restart? plz help me what should i do

my phone i disabled.when i connected it to the pc to restore and update it..my iphone after 5 mins goes restart? plz help me what should i do

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

HT201210 I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help

I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help

Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

When will the Camera plug-in be updated for the Canon 70D for Elements 9?

When will the Camera plug-in be updated for the Canon 70D for Elements 9

Hi,
There hasn't been an update for PSE 9 since Sept 2011 so it is unlikely to ever be updated for the 70D.
Your options are
1) Upgrade PSE 12 when it comes out (probably soon)
2) Use the Canon software (DPP) that came with your camera - convert to TIF files and import those into PSE
3) Download/Install the free Adobe DNG 8.2RC Converter to convert your CR2 files to DNG files - the DNG files can then be processed by PSE 9
Brian

Will the iPad 3 get ios updates

will the iPad 3 get ios updates as it is discontinued

Diavonex wrote:
Apple did not say that the iPad 3 is discontunued.
It did not say indeed. Do you always loudly announce your bowel-movements to the world? I gather no.
Diavonex wrote:
It's basically offering another option to their customer.
Yes, we all know that.
Bobwild wrote:
You can order the iPad 3 you need in the http://store.apple.com/us refurb section.
Nope, it's the Refurbished iPad you can order there. There's no such thing as iPad 3 currently, unless you already own one. The Refurbished iPad is NOT the same article, as it has an entirely different price. Cuz it's refurbished. Even if it's not.
It beats me how all those brand new factory-sealed objects became refurbished in an instant. Would've thought it would involve some sort of physical refurbishment process applied. Must been done by the Higgs Boson. Or the fairies. Or Jesus. Either case, it's a huge leap in technology - the miraculous mass-refurbishment!
<Edited By Host>

Hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me

hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

Will more function globals or sub vis slow down realtime DAQ or display

I need to do high sampling rate DAQ with varient data process and display.
Shall I intend to put all the code into one vi to accelarate the speed, or can I use more function global or sub vis to make the structure looks more reasonable.
Just worry how the compiler handle the data transfer when call function global or sub vis.
Will it creat new data copy and slow down the speed. Thanks.

The other 2 loops in charge of the data processing and display will keep checking the version of the 2 function global.
For high performance, you want to avoid this sort of thing. Basically, you're polling the functional global to see if it has new data. Polling will eat the CPU unless you include WAIT periods, but doing that slows your responsiveness.
Consider using custom events.
For the sake of discussion, let's say you need to process data in the TIME domain (1) and the FREQUENCY domain (2).
You create two events: NEW TIME DATA and NEW FREQ DATA, each carrying an array of DBL (the time-domain data from the DAQ).
The DAQ routine, when it gets a new data block fires both these events, feeding it the new data.
Your TIME DOMAIN loop (1) has registered for one event. When that event is triggered, the code accepts the data, and does whatever it needs to do (filters the time domain, graphs it, writes to file, averages, whatever).
Another loop (2) has registered for the OTHER event. When THAT event is triggered, the code accepts the data, performs FFT on it, and does whatever it needs to do (filters the frequency domain, graphs it, writes to file, averages, whatever).
Or you could do the same thing with queues.
When the use changes conditions, you change which event you listen to, or which queue you consume from.
The idea is that you want to avoid polling. Let the system tell YOU when data is available. Don't be asking the system if it's available.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Does io7 slow down a iphone 4?

does installing iOS7 slow down a iPhone 4?

Yes and no. Some have reported problems and others say they have no problems.
Here is a help article. http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
Or here too: http://readwrite.com/2013/10/15/ios-7-fixes-iphone-4-4s#awesm=~orrJrjEniSWFc1

Will the iPhone 6.1.3 update slow down my iPhone 4?

Similar Messages

Maybe you are looking for