Will the MapViewer OC4J instance conflict with the existing one?

Hello,
I want to install the MapViewer Quick Start kit, connecting it to my already-installed Oracle Database 11g Standard Edition. I also have installed Application Express 3.2. This is on a Windows XP workstation, for development use.
My question is, am I supposed to unzip the contents of the kit (or the contents of the mv10133_qs directory inside the zip archive) into the existing oc4j instance that installed with the database, i.e., ORACLE_HOME\oc4j? Or do I install the entire kit into a separate directory, for example ORACLE_HOME\oc4j_mapviewer? If the latter, will this mean that I will have two unique OC4J instances running? And will this produce a conflict? (I'm not sure what the Database-installed oc4j instance does, if anything. Perhaps run the Enterprise Manager Database Control?).
Thanks for any response.
-Dan

You should install (i.e., unzip) the MapViewer quick start into a separate directory and start its OC4J from that directory. Do not unzip it into your DB's (or any other product's) OC4J directory, as that will most certainly mess up both OC4J instances.
It's perfectly fine to run two OC4J instances on the same host. There should be no conflicts, except maybe network listener ports which you can easily fix from MapViewer's OC4J (as I assume you don't want to change the DB's OC4J settings). Just try it and let us know.
LJ

Similar Messages

Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
Photoshop CC

Hi,
Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
Another option is remove extension manager database file, then launch Extension Manager to install it.
C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
/Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file.

How can I install an extension when it conflicts with an existing one that doesn't appear in the list of extensions?

I'm trying to install Guide Guide for Photoshop CS 2014 using the Adobe Extension Manager CC but when clicking on the 3.1.2-guideguide.zxp I recieve the following error, "This extension cannot be installed, since it conflicts with a existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in ", then install again." Note that there is some code breaking in there where ", is. When I open Adobe Extension Manager CC there are no extensions listed. None under any of the products to the left. I can't uninstall it if it's not listed.
After reviewing the forums I have gone into my %appdata%\Roaming\Adobe\ folder and removed all folders for previous versions of Adobe Extension Manager.
Any help with this issue would be appreciated. Thank you for your time.

Please delete "C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db" then retry. Note that "C:\ProgramData" is hidden by default. You can input C:\ProgramData in the address bar of Windows Explorer then press "Enter" key to go into this folder.

When trying to install an extension in Photoshop CC 2014, I get this error: "This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in ", th

After installing Photoshop CC 2014 I went in and removed all other versions of Photoshop and it seems like extension manager is still seeing my old extensions and not allowing me to update them for 2014. Any help would be appreciated!

Remove the EM database file as described here:
https://forums.adobe.com/thread/1517855?q=guideguide
It worked for me!

HT1175 Time Machine wants to start with a new, full backup instead of using the existing one

Hi, my Time Machine wants to start a new, full backup, instead of continuing with the existing one on the time Capsule.
Looking a the Troubleshooting guide, I've found the following piece of info, which is, as 99% of the times with the troubleshooting guides, totally useless to resolve my problem...
Message: Time Machine starts a new, full backup instead of a smaller incremental backup
There are three reasons why this may occur:
You performed a full restore.
Your Computer Name (in Sharing preferences) was changed--when this happens, Time Machine will perform a full backup on its next scheduled backup time.
If you have had a hardware repair recently, contact the Apple Authorized Service Provider or Apple Retail Store that performed your repair. In the meantime, you can still browse and recover previous backups by right-clicking or Control-clicking the Time Machine Dock icon, and choosing "Browse Other Time Machine disks" from the contextual menu.
It should be noted (hence the uselessness of the guide) that:
-I haven't performed ANY full restore
- I havent changed my computer name
- My computer has not had ANY repair, much less a hardware repair. Neither recently, nor in the 9 months I've owned it.
Which puts me back to square one, with the marginal improvement that now I have a way of browsing my old backups.
In the event I decide to start all over again, will there be a way for me to "sew" the two backup files?
Or will I always have to go the silly way around?
Anybody has any idea?
Thank you for your time (machine/capsule, your choice;-)

Hi John,
no, that doesn't have anything to do with my problem.
Just look at the image below.
Time Machine thinks that the disk I've always used to do my backups has none of them.
If I open the disk with Finder, obviously they are where they should be.
It is even possible to navigate them as per the instruction reported above, but even following Pondini's advice #s B5 and B6 (which are more applicable to my problem) didn't solve the problem.
Actually, not being a coder, I'm always scared of doing more damage than good when I have a Terminal window open.
My question is: how is it possible that Apple hasn't thought of some kind of user command to tell the idiotic Time Machine software that a hard disk backup is a hard disk backup, no matter what?
Estremely frustrating and annoying: I'm wasting HOURS in trying to find a solution to a problem that should not have arisen in the first place...
Have a nice weekend
Antonio

HT4236 synching photos to my iPad3GS , will the original ones be lost?

I am unsure if I synch photos to my iPad3GS, which already has photos stored on it, will the original ones be lost from the iPad? ie how does one just add more?

Synced photos are deleted by not including them in the next photo sync, so you will need to include all the photos from your computer that you want on the iPad on each sync.
So it will depend upon how those photos got onto the iPad originally - if they were synced from a computer then you will need to include them in the next photo sync to keep them on the iPad. Photos that were taken with the iPad or copied to it via the camera connection kit or saved from emails/websites won't be affected.

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

I currently have wireless, but i am looking into this to maybe have faster wireless. if this is hooked up, will the existing wireless/ethernet to pcs still function without changing them to use the airport express?

i currently have wireless, but i am looking into this to maybe have faster wireless. if this is hooked up, will the existing wireless/ethernet to pcs still function without changing them to use the airport express?

let me fix this a bit. i currently have dsl and a 2wire wireless router, and i currently do not have one or a mac. im getting one for when i start college and this is a must if it will improve my internet. but i now connect wirelessly to the 2wire router. if this is set up, will the current 2wire wireless still be useable?

HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

Please Rephrase your query.

Patch installer not overwriting the existing one

Patch installer not overwriting the existing one
Hi, for one my LabVIEW application, I have created two installers
Including all the required additional installers (Installer)
With no additional installer (patch installer)
So that, for further versions they can use only patch installer.
When I try to installer both the installer of same version which created two icons in “Control Panel\Programs\Programs and Features” as shown below.
When I am installing the second installer (patch), I expected that it will either overwrite the existing or it will not allow me to install. But both didn’t happen.
Please share your thoughts on the above.
Thanks in advance
Phani
Solved!
Go to Solution.

Thank you..
I got another doubt on the same.
"Upgrade Code" should be same
1.)For both installers (normal and patch)?
2.)For all the versions?
which one is correct in the above two?

I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

Hi!
I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
Thank you in advance!
Best Regards,
Carlos.

Hi,
Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
* I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
* Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
I can download with the same user in the PC, in the iPhone... but not in the iPad .
I'm getting mad...

What is the existing ones

I have a problem with using custom login module
every thing is ok
the aplication loged in
but when i try to exeqtue a query to the database from the
emmanager it give me
Internal Exception: java.sql.SQLException:
User credentials doesn't match the existing ones
Error Code: 17079
so what is the existing ones

ok i get it
the the container cant read the Encrypted password
from the data-sources.xml ....
i fix the problem by rewrite the password by hand
and every thing is going well but why
this error Appear just when i use the coustom login module ?????

FM to create equipment task group counter by copying the existing one.

Hi Experts,
I need FM to create equipment task group counter by copying the existing one.
Manully we do this through the Tcode : IA01 but i want to do this through the Prog... for that i wrote one bdc it is creating some problem.
Please let me know any FM avaliable IN 4.0B
its very urgent please help me..
Regards,
Kali Pramod

try this /ISDFPS/TASKLIST_CREATE

LIS11 - will fill setup table again conflict with delta?

Hi experts,
we are using LIS11 delta mechanism. LIS11 data is used for two different dataflows in BW.
Because of a delta problem with the R3 enhancements the delta doesn't work properly for one of these.
For this one we want to do a full load until the problem in R3 is solved.
Therefore we have to fill the setup tables again each time we want to do a full load.
My question:
Does filling the setup tables again conflict with the delta mechanism for the other flow?
Or will delta continue to work properly?
Marco

hi,
The delta type for all 2LIS_11* DS is ABR--Complete Delta with Deletion Flag Via Delta Queue.
This means that there will be no conflict of data duplication in case of full repair, the delta is independent of set up tables.
Delete and reload the setup tables and the delta will not be effected and also the data will also not be duplicated in cube.
regards,
Arvind.
Edited by: Arvind Tekra on May 4, 2011 9:35 AM

How do you create a new trial AWS developer instance if the existing one is corrupt.

I've got an instance I can no longer connect to. I haven't done much with it so I'd like to delete it and start over. I don't see that as an option. Is there a way to do it?

Never mind. I was able to create a new one once I "terminated" the old one and waited for it to finish. I didn't want to terminate the old one because I was hoping I could pull some of my work off but since you can't create a new one without first deleting the old one, and I could no longer even connect to the old one, I went ahead and terminated it.

Will the MapViewer OC4J instance conflict with the existing one?

Similar Messages

Maybe you are looking for