Will the MSI FX5900Ultra NBOX fit in these motherboards?

I am wondering if this video card (NBOX 5900 ultra) will fit in the following motherboards.
ABIT AI7
EPOX 4PCA3+
I appreciate any feedback you guys can offer.

How about an IC7-G? The reason I ask is my supplier has only a few mobos to choose from and they dont carry MSI....I would get the MSI board but I can get an awesome deal from my supplier because I did some work for him (about 3/4 of the lowest prices of pricewatch). The mobos that I can get are the Abit IS7, IC7-G, AI7. Epox 4pda and 4pca. Asus P4p800.
The revision 2 epox board has a different heatsink and seems to allow a bit more space than the picture you posted.
Thanks for the help

Similar Messages

Will the MSI KM4M-V fit in a normal ATX case?

Hello all. Just wondering if I could get away with buying a normal size ATX case, and therefore add my own, decent, PSU. All the Micro ATX cases on Ebuyer come with a crappy 300W PSU or similar.
This is the spec I'm thinking of getting together:
Crucial 512MB ram PC3200 400FSB
Maxtor 80GB
AMD Athlon XP2800+
500W ATX Ebuyer PSU
All my customer wants it for is to browse the internet and use MS Office. I know the spec is higher than her requirements but I'm hoping to build her something to last for at least 3 years. Will the MSI KM4M-V board bottleneck those components, and so will I be wasting my money?
Thanks all , Mark.

Quote
All my customer wants it for is to browse the internet and use MS Office
that board will be more than adequate for what your customer needs why not buy a cheap second-hand PC?

Will the new iPad cases fit on an IPad 2

Will the new iPad cases fit on an IPad 2?

It appears that it only fits the new iPad. Here is the description page. Go down to the lower left corner where it talks about compatibility.
http://www.targus.com/US/productdetail.aspx?regionId=7&sku=THZ15601US&PageName=T argus%20Versavu%20%7C%20Targus%20USA&productCategoryId=5&bucketTypeId=0&searched Terms=Targus%20Versavu&navlevel1=&cp=&bannertxt=Search%20Results%20Targus%20Vers avu
This one fits the iPad2 and it is a VersaVu
http://www.targus.com/US/productdetail.aspx?regionId=7&sku=THZ045US&PageName=Tar gus%20Versavu%20%7C%20Targus%20USA&productCategoryId=5&bucketTypeId=0&searchedTe rms=Targus%20Versavu&navlevel1=&cp=&bannertxt=Search%20Results%20Targus%20Versav u

Will the standard iPad case fit the the iPad Air or is there a specific type case for the iPad Air?

Will the standard iPad case fit the the iPad Air or is there a specific type case for the iPad Air?

The air is different dimensions from other iPads, so look for cases made specifically for it. I know that Targus has some, so does Zagg and i'm sure other manufacturers do as well.

MOVED: Will the MSI 6800GT 256mb AGP 8x work on...

This topic has been moved to AMD SocketA based board.
Will the MSI 6800GT 256mb AGP 8x work on...

ask if you can return the card if it doesnt work cause for me the card wasnt working
https://forum-en.msi.com/index.php?threadid=37778&sid=
from the discussion with other members having the same bug as me it seems that they can be some incompatibiliy with 4x agp motherboard
Poubelle

Will the iPad Smart Case fit the 4th generation iPad

Will the iPad Smart Case fit the 4th generation iPad

The iPad Smart Case works with the iPad 2 and newer, so it works with a 4th generation iPad properly

When will the MSI K8N Neo2 Platinum BIOS 1.C be released?

Hello
When will the MSI K8N Neo2 Platinum BIOS 1.C be released?
Thanks
FearTec

Don´t know the reason for you guys, for updating bios, but basically I would recommend Syars modded EasyBios, based on the 1C3 (1C0) version.
Check out the link in Syars sig or read it here;
https://forum-en.msi.com/index.php?topic=59711.0
and read about the differant version and you´ll get a pretty good idea whats changed and added.

Will the iPhone 5 cases fit the iPod Touch 5?

Will an iPhone 5 case fit the iPod Touch 5?

Yes, Actually it fit really well and the dimension difference is technical not physical so the iPhone case hugs the iPod comfortably and there is not rattle or movement whatsoever.
I " don't think so" like others.. I've done this and own one!

Will the MSI Combo drive work w/ non-Intel boards someday?

I found out, after I'd gotten an MSI SATA combo drive for my MSI nVidia chipset motherboard and been using it for a few weeks, that the MSI drive is not supposed to be used with my board. This would explain the stalling errors I'm getting while trying to burn CD's. I've got the latest firmware on the CD-ROM, by the way - version 1.20. The MSI Live Update software only knows about version 1.10.
The product page says it's only supposed to be used with boards that have certain Intel chipsets. Is this a firmware limitation - in other words, will there be a software fix for this problem someday? Or should I just get rid of the drive now?

But that just doesn't make sense. I have a motherboard that is advertised as having "SATA" connectors and a Combo drive that is advertised as being "SATA", and they are made by the same manufacturer, yet they don't work with each other. Where is the defect? Is it in the motherboard or is it in the drive? Surely it is not the SATA spec itself, otherwise the SATA spec is meaningless.
Going by MSI's page for the Combo drive, I would assume the problem is in the drive because they say "only works with Intel xxx, yyy, zzz chipset motherboards".
I just want to know if one or the other will be fixed (in software) someday so that I can use this Combo drive's burning capabilities. That's all.

Will the MSI G4MX440-T 64Mb work with 250W UPS?

Hi guys, this is my system:
Celeron 1GHz 256kb cache
Motherboard DFI CA64-TC Rev.A+ AGP4X (AGP2.0,checked with PowerStrip)
256 MB RAM Pc100
ACER CD-ROM 54x
SONY CDRW 48x24x48x
Quantum Fireball HD
Sound Blaster PCI 128
3D Prophet 4500 (in a few days it will be MSI G4MX440-T)
UPS 250W (Brand: LP)
I just ordered the MSI G4MX440-T 64MB (I will have it on Tuesday,not enough money for a G4Ti).
I have read a lot in this (and many other) site about G4s and poor performance with not powerful UPS.
My system, with the 3D Prophet 4500 works just fine.I never encountered instability issues or poor performance.
I read in this site that the combined power of the UPS comes from the below formula:
{[(3.3V x Amps) + (5V x Amps)]/3} x 2
My UPS specs are:
+3.3V =>12A
+5V =>25A
So the combined power of my UPS I suppose it should be 114,13W.
I also read that a system with Athlon 1700+ and a G4Ti needs 200W combined power.
My system,which is less demanding from the above, will it have problems with the G4MX440?
I will repeat myself by saying that with the 3D Prophet I don't have a single problem.
I ask for your advice because I am a little nervous for the possibillity that I will encounter problems.
Thanks for your concern :D

Hi guys,
They didn't have the G4MX440-T and I bought the MSI G4MX440 -TD8X.
It works with 4x on my mobo but everything works perfectly fine!
My 250W PSU doesn't suffer at all!Can you imagine that?
I tried playing a few demanding games like Morrowind and Ghost Recon (which come with the MSI box) and the performance is awesome!Even at 1280x1024 the games are running smoothly!
I run 3DMARK2001SE and I have a score of 4198(1024x768 32bit)!
After hours and hours of playing I didn't have the slightest crash or any other instability!
And with the case closed there wasn't any increse in temperature (CPU 30 C, internal inveronment 21 C).
So, in conclusion there wasn't any problem with the card and the 250W PSU of my system.However thanks for your concern! :D

Will the wireless extreme card fit a MDD Mac

I tried to take the wireless extreme card from my FW 800 out and put it in my MDD Mac. It doesn't seem to be interchangeable. The guide in the MDD is about 1 inch longer than the FW 800. With some fooling around you can seem to plug it in and hook up the antenna but it doesn't seem to work. About this Mac doesn't see a wireless card installed. What wireless card should I use? There ate some USB wireless cards that claim to work in any Mac with a USB port and 10.3 or higher??
Bob

will the wireless extreme card fit a MDD Mac
No. Remove it immediately.
What wireless card should I use?
The original AirPort card, a PCI card, or an external adaptor.
(42373)

[VIA] Will the MSI 6800GT 256 AGP8x work on VIA KM266?

Will it work on my my VIA KM266 motherboard with AGP 2.0 4x?

If G. Card is downwords compat. with 4x, it should. As you can see in my sig. I'm running an 8x AGP in my 4x AGP Mobo.

Will the iPad 3 cases fit the new iPad 4?

Is the width, height, depth, size same????????? or is the size a little different?

LawrenceMKim wrote:
Is the width, height, depth, size same????????? or is the size a little different?
The physical dimensions are the same and all cases that work with the iPad '3' will also work with the iPad '4'. The center of the Lightning port is in the same location as the 30-pin dock connector center so while the opening may be larger than necessary when a '4' is placed in a '3' case it will work fine.
mende1 wrote:
iPad 2 cases don't work with 4th generation or 3rd generation iPad
The reason that some iPad 2 cases won't work with iPad '3/iPad '4' and some do is two-fold. First, the iPad '3'/'4' is a bit thicker which may cause a tighter than optimum fit--depending upon the case style. Stretchable cases won't be much of a problem, hard shell cases could be.
The second reason is because the iPad 2 only has a position requirement for the magnets to engage the on/off function, it does not also have a polarity requirement for the magnets as does the iPad '3'/'4'. If the polarity randomly happens to be a match it will work. If not it won't.
So to sum it up, if it is advertised to work with the iPad '3' or '4' it will work with the iPad 2 though the fit might be a little bit loose with some case styles. If it was built expressly for the iPad 2 it may or may not function fully with the iPad '3'/'4'.

Will the new 8Gb nano work with these speakers?

I bought a set of intempo speakers last year for my first generation 1Gb nano. I bought the new 8Gb nano last week and want to know if it will work with them. The manufacturers website with technical specs is below,
http://www.intempodigital.com/ids01.htm

The new nano comes packaged with it's own 'dock adaptor'. It's a #13 dock adaptor in case you're interested.
I don't have the speakers you mentioned, but I have an iPod hi-fi and I removed the dock for my 30GB 5G iPod and inserted the #13 dock for the new nano and it is a very nice fit- the click wheel sort of disappears in the hollow of the dock a little- but other than that it fits well and the nano doesn't wobble around at all.
The new nano fits fine on my iPod hi-fi- it sits in almost perfectly upright on the connector. It looks like it should tilt back a little when you look at the angle of the connector on the speaker. Maybe try holding the nano very upright- it doesn't need to be forced on. Took me a few turns to get the angle correct.
Good luck.

Will the new iPod Nano fit in my speakers?

I recently bought an Intempo RDI Speaker for my iPod Classic. It's last years iPod Classic (80GB). I was wondering whether the new iPod Nano (4th Gen) would work in my new speaker. Because i don't want to spend more money updating my speaker which i have just bought. I'm hoping the iPod Nano has the normal dock thing so it will fit.

It has a dock connector so it should play music fine. But the new iPods only charge on 5 volts (the older ones could charge on 5 or 12). If your speakers charge with 12 volts they will not charge the new iPods.
A lot of devices charge at 12 volts (even Apples own Hi-Fi) but most companies seem to be keeping this secret, if you are lucky there will be an FAQ on the company website that will tell you if it's compatible with the iPhone G3 (the first 5v only device).

Will the MSI FX5900Ultra NBOX fit in these motherboards?

Similar Messages

Maybe you are looking for