Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

Well, I'm not sure how anything can fit into a 5 mm depth, so I can see why they've removed the CD drive -  there probably wouldn't be enough room for the laser, LOL. Can't imagine speakers, hard drive (of any flavor), logic board and so on and so forth. Fortunately, my iMac has Applecare through early 2015 so I'm set for a while; I may check out a Mini at that point - saw that it is configurable with a fusion drive, which would make it interesting for me.

Similar Messages

  • I buy the new imac,late 2012 with a hard-drive 3TB and i want to change with another hard-drive 1TB....where i can buy?

    i buy the new imac,late 2012 with a hard-drive 3TB and i want to change with another hard-drive 1TB....where i can buy?

    It's also much more difficult to install third-party hard drives in current or recent Macs than it was. See:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
    The 2012 iMacs are also in essence glued together and very difficult to disassemble and reassemble. The bottom line is: don't try it.
    Why, if I may ask, would you want to remove the 3TB drive and replace it with a 1TB drive? What is it you hope to achieve even if it were possible?
    Regards.

  • I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

    I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • If I got a new hard drive on my computer and plugged in the time capsule afterwards, would I be able to recover the information from my old hard drive that was stored on the time capsule prior to the replacement?

    If I got a new hard drive on my computer and plugged in the time capsule afterwards, would I be able to recover the information from my old hard drive that was stored on the time capsule prior to the replacement?

    This may be of some help to you...
    http://pondini.org/TM/14.html
    From the FAQs Here...
    http://pondini.org

  • My computer hard-drive died and I lost the programs I purchased and installed via download.

    My computer hard-drive died and I lost the programs I purchased and installed via download.. Can I somehow re-download what I have already paid for? I am an unemployed student and can in no way afford to buy these programs for A THIRD TIME.
    I absolutely, positively NEED the Adobe Creative Suite in order to do my homework (I'm a web and graphic design student). I can not be without these programs!

    Yes, there are downloads available.  You should check you Adobe account online as there might be links provided there.  Your serial numbers will be needed for activation, and they might also be found there.
    Since you did not identify a particular version here are general links to all available...
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.  Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    http://prodesigntools.com/tag/ddl
    Since you lost the installation(s) without deactivating them first you probably should contact Adobe Support thru chat and ask them to reset your activations so that you have the two available to you in case you want to have a backup installation on another machine.  For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

    I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

    I do not know what you are waiting for.
    I'd make a backup of your important stuff before cloning the entire disk.
    Carbon Copy Cloner will copy your startup drive to an external  firewire drive.  You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
    http://www.bombich.com/software/ccc.html
    SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

  • HT1349 I had to get a new computer as my hard drive went and lost everything. How do I get my itunes library back?

    I had to get a needed to get a new computer as my hard drive died. How do I geatr my ituens library of songs back?

    The easy way is from the backup you make of your computer so in case something happens you don't lose anything.
    You can download some media files purchased from Apple:
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this).  Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.
    This will not reconstruct your library as it was.  It just puts the media back.  You will have to do playlists, ratings, etc.  If you have music from another source you will have to get it from there again.

  • Can anyone help me to transfer everything I have on my Ipad on to a new computer.  my hard drive crashed and a new one was installed and I do not want to loose all my apps or music.  Please help

    Hi everyone,
    I am looking for help and maybe someone can help me please.  My hard drive crashed and dell installed a new one.  I have two iphones and an ipad with all my apps, music, amd photos.  Can anyone indicate me what to do so I do not lose everything when I plug in my phone.  Thanks

    Naturally you should have a recent backup of your "crashed" hard drive. If you don't, well, hopefully you've learned a lesson but that doesn't solve your current problem.
    If all your apps and media were purchased from the iTunes App Store, don't worry about them. Redownload all your apps and media, then allow iTunes to sync with and wipe your iOS devices - which will also put all the apps and media on them. You'll lose your settings, and any data which resided only on the iOS devices, and of course you'll need to organize your iOS folders and home screens and whatnot. But you won't really lose much, and without a backup this is your best choice.
    If you have media from sources other than the iTunes App Store, look at Senuti or similar applications designed to copy media from iOS devices to computers. Use that first, then sync as I described in my second paragraph above. (I mention Senuti because it's popular. There are other options which work just as well, and some are even free.)

  • HT1420 I have a number of devices linked to a single iTunes account. Of these devices, two of the originals were computers whose hard drives failed and I was unable to die authorise them before the failure occurred. Is there a way of deauthorising them on

    I have a number of devices linked to a single iTunes account. Of these devices, one was a laptop whose hard drive failed, and one was an iPad which died. My question is if it is possible to remotely deauthorise these devices or is it necessary to deauthorise all devices on the account and then reauthorise those devices which are still current.
    Thanks
    Tan Anu

    iPads don't count in the number of authorisations, only computers count. Individual computers can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can 'deauthorise all' (which you can only do once every 12 months) and you can then reauthorise the computers that you still have and need (deauthorising a computer doesn't remove any content from it).

  • I have an early apple tv. Will it support netflix streaming? Also what is the size of the newest apple tv's hard drive? And, will my current apple tv be able to use the icloud services?

    I have an early apple tv. Will it support netflix streaming? Netflix does not show on the internet tab on the AppleTV display.
    Will my current appletv connect to icloud services, synch, etc.?
    Also, what is the size of the current appleTV's hard drive?

    1. No to NetFlix and ATV1
    2. If you mean your ATV1, no.
    3. If you mean your ATV1, there are more than one hard drive size.  If you mean the new ATV2, it doesn't have a hard drive.

  • Replaced iMac G5 hard drive - now nothing works except the fan :(

    I have an iMac G5 ALS with the original 160 gb internal drive. I researched and printed the apple instructions for replacing the hard drive, copied all of my important files onto an external and then sat down to replace the drive. I followed the instructions step by step, doing well except that the temperature cable connector broke. So I did more research and many posts said that it didn't need to be connected to operate. I closed everything back up and hit the power button. All I got was the power light and fan noises, followed by increased fan speed after a minute or less. I could hear the hard drive spin briefly soon after I hit the power button.
    Startup from the install disc you all will tell me. Well, I would if the disc drive would inject the disc.
    So, now I've spent my whole afternoon trying different scenarios to troubleshoot. I've gotten nowhere. I tried reattaching the temperature cable wire by wire, no luck (of course there are four of them and they are loose, so which goes where I don't really know. I tried keeping them in the same order in which they leave the other connector). Nothing.
    Okay, so if I put the original hard drive back in it must work until I get this figured out...nope. Now that I have the original hard drive replaced into the iMac I get the power light and fan noises, no sound, no screen. Same as with the unformatted new drive.
    I was careful to connect everything back and I am really surprised in myself that I cannot make it work. The only thing that is truly different is the temperature cable, and I've read enough that says it should still start up.
    Please help me if you have any ideas.
    Jonathan

    Hi Bicyclerjs-
    Greetings and welcome to the Apple Discussion boards
    Did you try resetting the SMU? Have you tried resetting the NVRAM?
    Luck-
    -DP

  • I have an external hard drive set up as a Time Machine backup on my IMac. I want to add a second external hard drive and put my Aperture Photo Library on it. Is there a way to have the photos on this second hard drive automatically back up to the Time Mac

    I have an IMac with an external hard drive set up as  a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?

    Open System Preference > Time Machine
    Click Options....
    Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
    Allan

  • IMac Leopard Hard Drive--who knows what's the problem

    Alright, this all started last night. I downloaded some P2P programs and was downloading a few large files. I should have thought something was wrong when I got a message saying my start-up disk was too full and I needed to delete files. I figured I let it go overnight and see what happens. So I deleted some media files I've been meaning to.
    This morning it had obviously restarted and was at the log in menu (though it shouldn't have). So I tried to log in. Then it kept going to white screen with grey apple and rolling thought thing underneath. It'd sit like that for awhile then reboot and get back to the white screen.
    So I've been looking up other discussions and have tried the following.
    --Hardware troubleshoot--restarted with power button, as it was coming on held down the D key--didn't do anything
    --Disk Utility--inserted Leopard DVD, restarted held down the option button, Disk Utility. At first I couldn't unmount it. So I plugged in my old external HD and installed Leopard on it. Then through that external Leopard account accessed my IMac's HD. I couldn't get to the applications for some reason but was able to delete some if not most of the newly downloaded files I could find. Some I couldn't because of an error (-36) saying I couldn't read/write.
    When I did Disk Utility on IMac from there I got error saying invalid ...count. Verify or Repair failed. I tried just Verify and it failed so apparently it didn't make it to repair.
    So then I tried AppleJack program--downloaded and installed, then tried restarting. I'm not really positive I did the AppleJack program right. I restarted holding down the S button--got a lot of words and then it just stopped. When I tried to type applejack auto nothing happened so I restarted again. And then I couldn't start up on the external (the internal HD still does the white screen). It would give me a screen saying I needed to restart-so I did a few times and decided it was hopeless.
    So now I'm re-installing Leopard on the external to hopefully at least have that access to the internal drive.
    I feel like I've tried a lot but also wasn't able to do a lot of it. And I'm just hoping I haven't killed it past repair.

    Hello,
    *"--Disk Utility--inserted Leopard DVD, restarted held down the option button, Disk Utility."*
    When booting from your restore disk, you have to hold down the C key until you see the Apple logo.
    Then you can access Disk Utility from the Utilities Menu to verify and hopefully repair the disk.
    "The log does have the same problem as my internal did with disk utility "invalid record count, Volume check failed" It also has 331 other lines I don't understand."
    Reinstalling Leopard on a the disk with errors won't work.
    If you have another Mac, you could try Transferring files between two computers using FireWire
    If you have two Macs that are FireWire-equipped, you can connect them so that one of them appears as an external hard disk on the other. This is sometimes called Target Disk Mode.
    To transfer files using FireWire:
    Shut down the computer to be used as a disk. Leave the other computer on.
    Connect the two computers with a FireWire cable.
    Start up the computer to be used as a disk, then open System Preferences, click Startup Disk, and click Target Disk Mode. (Or, start it up while holding down the T key.)
    A disk icon appears on the desktop of the other computer.
    Transfer files by dragging them to and from the disk.
    Eject the disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
    On the computer you used as a disk, push the power button to shut it down, and then disconnect the FireWire cable.
    If you can't repair the hard disk with Disk Utility, go here and check out DiskWarrior
    Carolyn

  • Itunes is not picking up the library on my external hard drive although I have mapped the drive in preferences? Can anyone help please? Thank you.

    Hi,
    I have been rebuilding our iTunes library on a external hard drive, no problems to start with.  The pc crashed the other day and I lost some of the files.
    I can see the music files on the external hard drive, but I haven't been able to get iTunes to pick them up as being the library despite following the instructions to map the drive under 'preferences' in iTunes.  I have added new songs, these are being saved in the folder on the external hard drive and are showing in the library pane on iTunes, any suggestions how I can get the other files to show in the library? Would be very grateful for any help! Thank you.

    The fix for the exclamation marks is: Adobe Lightroom - Find moved or missing files and folders
    The proper way to use backups is to restore the photos to their original location, but you probably don't want to do that as you said your old hard disk was almost full. Thus, the solution given above will solve the problem.

  • My iPhone 4S was recently replaced as it had a faulty wifi antenna. The new phone no longer syncs iMessage with my ipad like the old one used to.

    My iMessages were always automatically synced with my  6 monthold iPhone 4S. However the phone recently had to be replaced by apple because of a faulty wifi antenna. The new phone was restored from backup. It works fine but iMessage no longer syncs with my ipad. I've looked into the settings and can't see anything wrong? I can iMessage from my phone and iMessage from my ipad but they don't synch. Very frustrating. Would appreciate some help. My nearest spple store is 30 miles away. Thank you so much.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

Maybe you are looking for

  • Change the Default Page Size for WebI

    Hello Experts, We have requriement where we need to change the default page size and margins for WebI, I have change the page size in defaultconfig.xml but don't see any options for Margins, How do I change the default margins? Any help or suggestion

  • Mini calendar in mail missing after Lion installation

    mini calendar in mail missing after Lion installation

  • SAP MII Navigation

    Hi all, I'm trying to change user's menu Navigation in real time. Do you have any idea how Navigation is managed ? How could we change it on the fly ? I couldn't find a SAP MII internal table corresponding to Navigationfor example... However in workb

  • SCOM 2012 SP1 Test environment - "New View" is greyed out?

    I'm new to SCOM.... I just created a SCOM 2012 SP1 test environment, but for some reason the "New View" button is greyed out. (I attached a screenshot)  I can't figure out why and it pretty frustrating. I'm assuming it is a permissions issue, but I c

  • Certification Nugget: CLAD - Certified LabVIEW Associate Developer

    About the CLAD Exam: The clad_exam_prep_guide_english.pdf states that "A CLAD demonstrates a broad and complete understanding of the core features and functionality available in the LabVIEW Full Development System and possesses the ability to apply t