Will the new lightning to 30-pin adapter support.... ?
Will the new lightning to 30-pin adapter support a cord at which the 30 pin goes and splits into a RCA cable for audio output and USB for charging, this is what is used in my car currently to feed my former iphone 4 into the cars stereo while also charging? My question is there is no video output only audio and charging, will it work?
doubt it as it would be as easy for the old charger to do that as the new ligthing
when a feature is removed then it would not make much sense to remove it and then reinterduce it later on with no benefit to the producer of the product
Similar Messages
-
Lightning to 30 pin adapter support firewire charging?
I've got an old iPod interface in my car -- the kind that charged the first gen iPod touch via firewire. Will the new lighting to 30 pin adapter convert firewire charging to USB?
doubt it as it would be as easy for the old charger to do that as the new ligthing
when a feature is removed then it would not make much sense to remove it and then reinterduce it later on with no benefit to the producer of the product -
Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation
Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation.on my dock
Have you contacted the dock manufacturer?
The adopter supports audio if the dock manufacturer says the dock supports the 5G iPod.
It may be that the dock does not work with iOS 6.x vie the 5G. Sometimes an iOS update will break compatibility. -
Does the lightning to 30 pin adapter support audio?
I have an iPod touch 5th generation and can't listen to it in the car because the wire from the cars FM transmitter has a 30 pin connection. I was just wondering if the lightning to 30 pin adapter would support the audio.
Hey treshz98,
Thanks for the information, I believe the following article addresses your question:
Lightning to 30-pin Adapter: Using video adapters or other 30-pin accessories
http://support.apple.com/kb/HT5498
When you connect an iPod or iPhone with the Lightning to 30-pin Adapter, the iPod or iPhone will be treated like an iPod that does not support iPod Out. You should still be able to navigate through and play your music using the vehicle's built-in user interface.
Additional information:
Lightning to 30-pin Adapter - Apple Store (U.S.)
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
Thanks,
Matt M. -
I have older connectors so I wanted a single new adapter to connect my older adapters rather than buying several new ones. But this one doesn't seem to work on iPhone 5. But does work on mini to upload photos from sd card. Bummer. Any solution tips. Mike
See if anything here helps.
Can't connect to the iTunes Store - Support - Apple
Best Fixes for 'Cannot Connect to iTunes Store' Errors | iPad Insight -
APPLE LIGHTNING TO 30-PIN ADAPTER MD824ZM/A
I have just bought a new iPod Touch 5th Gen.
Will the "APPLE LIGHTNING TO 30-PIN ADAPTER MD824ZM/A" let me connect the iPod to my surround sound, which has a 30 pin dock, and allow the music to play through the system?
Have been doing some searching and have seen varying answers. The APPLE LIGHTNING TO 30-PIN ADAPTER MD824ZM/A cable is not cheap so I don't want to be paying out for something that will not do the job.
ThanksThanks - hadn't considered the surround controls controlling the iPod so handy to know
-
I'd like to use this remote for my iphone 5 in my car to listen to music. The iphone will be plugged into the stereo and be stowed away but I want a way to change the song because my stereo doesnt allow complete ipod control. Can i use the 30 pin adapter with this remote to hook the wireless adapter for the remote to the iphone? So i guess what im asking is does the lightning to 30 pin adapter support whatever kind of data is going between the iphone and wireless remote adapter?If not are there any good alternatives out there? Thanks!
I am pretty sure that will not work. Does your TV have HDMI? You will need this:
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=4 5&fs=m.iphoneCompatibility%3Diphone_5
The adapter your purchased has this note :
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported. -
I just realized the adapter I need to connect the media station on my car (Audi A8) can only be used by taking the phone off from the case (Iphone 5S case blue color) : why the pin cannot be done a little longer, so to avoid taking the case off every time I need to recharge or to listen to my music ?
This make no sense...
The cable supplied by Apple is not suiting at its best when the cable from Belkin is pefectly working, I don't need to take the phone off from the case if I need to recharge!Because that is the way Apple designed it
http://www.apple.com/feedback/
Try using the Apple lightning to 30 pin adapter (.2m )
http://store.apple.com/uk/product/MD824ZM/A/lightning-to-30-pin-adapter-02m?fnod e=45 -
Looking for an extender for lightning to 30-pin adapter
The .2m, or the longer lightning to 30-pin adapter for the Iphone 5/5s/5c, is too small.
I drive a 2008 VW Jetta with a 30-pin iPod adapter dock in the center that was stock with the car. I have the adapter, but, it is just not long enough at all. I don't mind it, but I would prefer, of course, to have something longer, and safer.
I have already tried Cablejive cables, and they are not compatible with VW systems.
I don't care if the solution is bulky at this point, I just want something safer when I drive, so it is easier to pick my music.
I was reading somewhere someone using a firewire cable or something? And just to let you know, I do not have an MDI connector.
Thank you all.If you're using a case on your iPhone 5, the problem may have something to do with the way your case was designed. Many of the most popular cases aren't compatible with the adapter becasue they prevent it from being flush with the bottom of your iPhone.
The workaround solutions are to cut out part of the bottom of your case so the dock connector will fit, or to exchange the adapter for the adapter cable, which is $10 more but plugs in to the bottom of your iPhone like the USB cable that came with it.
Personally, I just cut two small rubber parts of my case out (an Incipio DualPro that otherwise offers great protection, which I got at the local Verizon store). That solved the problem for me. -
Apple Lightning to 30-Pin Adapter and 1st generation connector
Will an Apple Lightning to 30-Pin Adapter allow an iPhone 5 to charge from a 1st generation connector? When I plug my old iPhone 3s directly into my 2006 Lexus LS430 connector, the iPod function will work but not charge. This is apparently because 1st gen connectors didn't have a USB charge capability. I'm hoping the adapter will correct that.
As I suggested above ,the first iPod had a firewire connection ,as did the next ( I have one)
I also had the first Bose sounddock which was designed for the first iPod and required the afore mentioned adapter to work with my iPhone 3G
As I said to charge the iPhone 3G you need the adapter to change the 30 pin wiring from having firewire to just USB as everything is today
Look at
as an example ,this is the type of adapter you require to change the car live connection to support the iPhone 3G
If you then also want to use an iPhone 5 you will IN ADDITION require the lightning to 30 pin adapter
<Link Edited by Host> -
I currently have a 5th generation 30GB ipod that I use in my car with a cables to go 3.5mm to dock connector audio cable.
I want to upgrade to a 32GB ipod touch and I was wondering if I use the Apple lightning to 30 pin adapter and connect it to my cables to go cable in my car will the touch give me a line out signal the way my current ipod and cable does so that I can listen through my cars audio system?
Hope this makes sense.
Thanks
FrankI ended up cancelling my order for an iPod touch 4 and instead ordered an iPod touch 5 32GB.
I received my iPod touch 5 yesterday and tried using the Lightning to 30 pin adapter in my car with the Cables to Go 30 pin connector to 3.5mm cable connected to the AUX port in my car and heard nothing through my cars stereo system.
Fortunately when I ordered the iPod I also ordered another 30 pin connector to 3.5mm cable by Comprehensive and when I hooked up that cable in my car it seemed to work perfectly. Not sure what the difference in the cables could be, but I think I will pick up an extra one. -
Case for iphone 6 plus with lightning to 30 pin adapter?
I recently upgraded to a iPhone 6 plus from an iPhone 5. I have been using the square lightning to 30 pin adapter to adapt the 30 pin plugs on both my bedside clock radio/dock for overnight charging and in the glovebox connector in my 2013 VW Jetta. I had no issues connecting the plug with an Otterbox Defender on my iPhone 5. However, there are very few cases on the market right now for the iPhone 6 plus, and the Otterbox was not readily available when I purchased the phone 2 weeks ago, and I'm also not so sure I want to fork over the $60 since Apple isn't recommending the Otterboxes anyways. I'm not sure I buy into the Lifeproof concept, although I know some people love them. The Tech21 cases also have to be ordered, and don't have integrated screen protection like the Otterbox Defender. Admittedly, as careful as I try to be with my phone, I am a dropper and need a protective case. I ordered a cheaper Caseology case, but it does not allow the lightning to 30 pin adapter plug to attach, so I cannot charge my phone on my bedside dock or in my car with the adapter. I looked at the Spigen cases online as well as several others, but none of them seem, from visual inspection of the online photos, to have the large opening that the Otterbox for my iPhone 5 did that allowed the adapter to be connected.
Yes, I could buy extra lightning cables and reinvent my whole charging system, but I have found the cables to be not nearly as durable as the adapters (I've gone through many cables in the last two plus years, but still have the same two adapters.) I would rather find a case that accommodates the adapter. Any suggestions for cases that will allow the adapter to be attached with the case still on?Have a look at cableJive they make the dockStubz which might do what you are looking for
-
Lightning to 30 Pin adapter MD824MZ/A and IOS 7
Hello,
i have problems to connect the original lightning to 30 pin adapter (MD824) under IOS 7.0.6. on my Ipad Mini.
Tried 2 different cables und 4 different IOS devices (1 Iphone, 2 Pad mini, 1 Ipad Air).
Error Message says, that the cable is not supported.
The cable seems to be disabled, even charging does not work.
Anyone having the same trouble?
Greetings
Walter (Vienna, Austria)Sorry the correct product number is: MD824ZM/A
i don't know how to change the headline -
Will the lightning to 30 pin adapter play music through my dock
My husband has a 7th gen iPod nano, and I have a docking station for my iPhone 3GS, we have been looking at the lightning to 30 pin adapter today music through my dock, will this work?
I would check Sony's site and see what they say.
-
Will the lightning to 30 pin adapter work with the irig midi interface?
will the lightning to 30 pin adapter work with the irig midi interface? Want to record guitar with garage band on ipad mini. need quick/easy way to connect USB to ipad mini
From both? Interesting. I like that though. I am looking for the controls to be on the iPhone rather than the stereo as it ***** finding songs this way. And yeah, $39.00 is a lot for this, and it is only roughly 8" long. Oh well, I will need it, so I will have to buy it. Thanks for the message back!
Maybe you are looking for
-
How to fetch the data & display the data if fields got the same name in alv
hi frnds, i need ur help. how to fetch the data & display the data if fields got the same name in alv grid format. thanks in advance, Regards, mahesh 9321043028
-
Error in Java based iView when trying to use J2EE bean
I am trying to create a iView based on Java Portal app. [Java portal app has dynPage based Portal App Object] I created a PAR and uploaded to Portal. I created iView and worked it fine in (preview). [iView created using "Content Administration -> Por
-
ResultSet "hangs" after every 10 records
Hi Please could you somebody help me. I have extracted a ResultSet from a database which contains between 100 and 200 records (5 field each). If I call rset.next(), printing a count after each call my program hangs for about 2 minutes after every 10
-
I just attempted to calibrate my year-old 23" ACD using a Spyder2Pro. The resulting profile looked much brighter and redder than any of the other profiles such as Apple RGB, Adobe RGB (1998), Generic Monitor, NTSC (1953), etc. In fact, clicking throu
-
I have purchased a apps but it doesnt work at all, could i have a refund for that?
The apps keep crashing while loading which i cant use at all Could i have a refund for that