Will the Officejet 7000 handle 10 mil glossy photo paper, can it pull that thickness through it?

I had an older DesignJet 1220c that would not feed the 10 mil photopaper through it, I had to manually feed it from a paper slot in the back.
What about the Officejet 7000? Is 10 mil photo paper approved for it?
Thanks,
MG

Try the troublshoooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

I have photos with the same numer but they are different photos how can I fix that?

I have photos with same names but they are different photos. Can I rename these photos ? How can I do this?

you can save a file with the same name by dragging and dropping from iphoto to a Finder folder
but (and there are always buts) you can only do up to 4 photos at a time
any more and you are not given the option
This is the error message you get:
An item named “IMG_8770.JPG” already exists in this location. Do you want to replace it with the one you’re moving?
4 or lesss your options are:
Keep Both Stop Replace
5 or more your options change
Skip Stop Replace
it will add a space and a 2 to the name
IMG_8816.JPG turns to IMG_8816 2.JPG
this is the solution I was looking for; let the computer do the name change
Cheers!

HP x64 printer--won't take glossy photo paper

This printer will not take glossy photo paper--it simply grinds and message reads "Out of paper". It will print matte photo paper and regular paper, but not glossy photo. I bought HP glossy photo paper and that won't even work.

Hi,
What is the exact paper type?
The printer specifications does not list Glossy Paper as a supported media, any supported media is listed under Paper-handling specifications > Supported photo paper:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04085902&cc=us&dlc=en&lc=en&product=5367608&tas...
What is the exact media type and weight, that may also help identifyig the issue, the exact paper type should be listed on its packaging...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Glossy Photo paper q1427a vs q1427b

I've been using HP Glossy Photo paper q1427A with fantastic results. Results look just like a glossy photograph. As that is a discontinued product I was sent q1427b HP Glossy Photo paper . Although the paper looks glossy when printing the exact same file, with same ink on same printer on the q1427b paper, the images print with a satin finish instead of shiny glossy.
What happened to REAL glossy photo paper? What is the best substitute for the q1427a paper??
Thanks,
Scott

Thers more trouble with the new paper:
while you can touch the ink on 1427A after the normal drying time (6 min on a 510ps) without damaging the print
the same ink will be still wet and "untouchable" on the new paper

Photosmart 7515 jams using Kirkland (Costco) glossy photo paper

I have used other photo papers in the past including HP. But this time I purchased a package of Kirkland Professional Glossy Inkjet Photo Paper. After starting a print job, the paper starts to feed and then jams. Once it actually printed, but the print was about half off the paper. The other attempts all jammed. I ruined 5 sheets so far with no success. This Kirkland paper does not seem any different from the others used. Is there something wrong with the printer? I don't have a different paper to try at the moment.

Hi , Welcome to the HP Forums! I see that your HP Photosmart 7515 is jamming when using Kirkland (Costco) glossy photo paper. I am happy to help! It is possible, that this type of paper may not be supported with this printer. In order for me to find out, I will need to know the size and weight of the paper you are using. In the meantime, please try the steps in this paper jam guide. A 'Paper Jam' Error Displays on the HP Photosmart 7510 e-All-in-One Printer Series. Hope this guide helps, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

HT1343 On my 4 1/2 year old Macbook I could select multiple files by highlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

ghlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

Holding down the control key will invoke "right-click."
Depending on the View, holding down Shift will with either toggle the selection (Icon View), or it will make a continuous selection from the previous selection (List View or Column View).
The only way to make a continuous selection in Icon View is to drag out a selection marquee around or through the icons.
I can't remember the behavior of previous OS's.

When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?

When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?

When I'm at my home, and on my Wifi, my 4G icon on my LG G2 is still present. No big deal. If the bits can flow via WiFi, that's what they'll do.
You might try (if you really MUST shut off the cellular radio):
Settings, Network Connections and More networks. Select Mobile Networks and uncheck Mobile data and data roaming.
Not sure if that will work - but give it a try.

Which printer is recommended by real users to print on glossy photo paper?

My MG8100 can't seem to grab the glossy photo paper when I am printing pictures. Very frustrating to spend so much on a machine that is for printing photos and the rollers are plastic and won't grab the glossy paper. Thanks for any suggestions.

Thanks for the updated information!
This type of paper is supported with the printer. There are a few things we can check as to why it is not pulling it. First, make sure the glossy paper is being loaded into the rear tray of the printer. It cannot be pulled from the bottom tray. Also, if you load too many sheets, it may not be pulled. To help test the issue, try loading just one sheet and try again.
If all else fails, please run through a few roller cleanings. Check out the link below for step-by-step directions:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
If the issue persists, we'll need to do a little more troubleshooting to determine what may be occurring. Please reach us at http://bit.ly/Phone_Support for further assistance.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Colors on glossy photo paper is splotchy. any help would be appreciated. Jan

mx892 -- colors on glossy photo paper is splotchy. any help would be appreciated. Jan

I' my ust grasping at ideas to try and help. Is it possible that the paper is being loaded upside down? I know you said you've used this paper and printer before, (and I am not familiar with that paper) but Canon papers I have used display that behavior if they are loaded upside down. Do you have other paper you can try to see if it works OK on that paper?
I saw above you were looking for updates. If you didn't change your computer operating system you shouldn't need an update, but just in case where were you getting confused?

The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that?

The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that? Or just wait till Mac release a new version update, also some game and apps doesn't open or when open they close, please help!!!

Start by closing all apps and resetting your iPad and see if that helps with any of your issues.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close all of the apps on the iPad this way.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips?

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips? Also when I use my blade it only leaves a dotted line in the clip. How can I make that a solid line? I do a lot of flickering in my videos and don't need that some what of a snapping effect while I edit. Please help me someone. I believe i upgraded from FCP 10.0.1 to 10.0.3 and before it never did this.

Mark an In point and an Out point (which creates a Range) and hit the forward delete key (Replace with Gap.) On a MacBook, you'll probably need to hold down the Fn key and type the Delete key (or, I think you might be able to use Shift-Delete as the same command). On an iMac/Mac Pro keyboard, it's the key just to the left of 'end' or the next key above the left arrow key.
You can use the Range tool (hold down the R key and click drag over your clip) or the Blade tool to cut at the in and out (then select the cut and replace with gap).
You can also go into Commands > Customize (command-option-K) and assign a different key to Replace with Gap.
If you need to ripple edit the ends (cut), create a small section that is Gap, and hold down the T key while you use the mouse to click drag both ends (double sided trim cursor) of the cut.
Don't worry about the dotted line blade... That just lets you know that the frames on either side of the cut are continuous, or sequential — nothing has been moved yet. Once frames from either side of the mark have been cut, it becomes a full fledged cut resembling a separate clip.

Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

Can I repair that?
Repair what? Your description seems a bit unclear, maybe posting a few screenshots can help clarify the issue.
Are you talking about Quick Mask Mode?

I pain for coins on the app and it charged me twice. How can you return that extra charge back ?

I pain for coins on the app and it charged me twice. How can you return that extra charge back ?

Hi there Waliedk,
If you are experiencing issues with your purchases, you may find the information in the article below helpful.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
-Griff W.

I'd like to limit the Firefox window to the same size as my website...how can I do that?

I'd like to limit the Firefox window to the same size as my website...how can I do that?

Sorry, that isn't possible any more in Firefox, except for pop-up windows that a web site opens itself, and that can be overridden by the user with a simple preference setting in Options.
Users can't change or set the window size in their own browser from the URL bar any longer, they have to do it via the Scratch Pad in Web Developer menu under the Firefox button.

Will the Officejet 7000 handle 10 mil glossy photo paper, can it pull that thickness through it?

Similar Messages

Maybe you are looking for