Will the Sound Blaster Audigy 2 drive bay work with Audigy 2 ZS car

As above,
can the Audigy 2 dri've bay be used with the Audugy 2 ZS and if so, can everything on it be used?.
Are all the connections and functions the same on both dri've bays(Audigy 2, Audigy 2 ZS)?

Yes, they should work with eachother, but it is not officially supported.
Cat

Similar Messages

  • Will the Sound Blaster Digital I/O Module enable me to use my DTT3500's with my audigy

    I have a vanilla audigy 4. Just found out that it only supports 2. digital speakers. My DTT3500's are 5. and in the spaeker test only the front left and right make a sound, as digital 2.. will the Sound Blaster Digital I/O Module enable me to get digital 5. as my old soundblaster li've platinum 5. let me do? ie. all speakers show up in the speaker test?
    yours sincerely,
    john kelly

    No. The digital output module is simply an adaptor to standard 2-channel connections such as optical, coaxial etc. Even if it includes the bigger 9-pin DIN connector which was the first generation of the DIN connectors, the Digital Output on the Audigy 4 is still only giving it 2 channels of sound, so all rest speakers will be silent.
    If you are interested and have the skills you may modify the DTT3500 to support an extra analog connection for the center channel, the instructions were posted on this forum somewhere. Do a search...
    There is really no other way to have the center channel receiving the signal from the card. (Theoretically you could modify the card to get the signals from there, but the chances are you will most propably destroy it in the process).

  • Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please

    Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please

    Hi, sill no joy with my sound on my iPad .the sound only works on one app ( Annie ) and the ring volume and it works for about 5 seconds after I switch it on . Was talking to apple and they said the reset my iPad and this will fix it .done this and it is still not working only with earphone and Annie. What next ?As they said this is unheard of as it was the upgrade to iso6 that caused this problem . Help

  • Will the mini display port to vga adapter work with a 2007 mac book?

    will the mini display port to vga adapter work with a 2007 mac book?

    I think your Macbook came with a Mini DVI port instead of a Mini Display port.

  • Will the HP LaserJet P2035 Monochrome Laser Printer work with the I mac

    will the HP LaserJet P2035 Monochrome Laser Printer work with the I mac

    If you need any specifications on the printer I would suggest visiting this link:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodType Id=18972&prodSeriesId=3662025&lang=en&cc=us
    You can find drivers, user guides, and all kinds of data at that site to determine if it will work right for you.
    Hope this helps!
    I work with HP

  • Will the at&t version of iphone 5 work with t-mobile?

    Will the at&t version of iphone 5 work with t-mobile? As I have a t-mobile prepaid plan and I really wanna buy it!!!
    And will t-mobile provide me with a nano-sim?

    Yes, but the officially unlocked iPhone is not available for sale in the US, at present. T-Mobile will have nano sim cards & they are advertising that iPhone 5 owners switch to their service.

  • Will the Sound Blaster X-Fi Work with Sony Viao Laptop?

    7Will the Sound Blaster X-Fi Work with Sony Viao Laptop?@ I have a Sony Vaio Laptop. When i purchased the laptop i did not know you could only play music through the mic on Sony Vaio. The mic and sound card are intergrated and there is no stereo mix on the Sony Vaio's.( You cannot en-able the stereo mix on Vaio's )I like to play music on a chat program called pal talk, they have music rooms. But my music sounds like crap because i have to play through the mic. I purchased this USB Sound Blaster to hopefully allow me to play through the sound blaster card. There is a lady on pal talk who plays music and talks on the mic using a Sony Vaio. She is the one that told me i needed to get a creavti've sound card to play music in the rooms. The problem is
    I can't find her to ask which sound card she purchased. So i did some research and purchased the X-Fi usb card. Now the problems start. I purchased the X-Fi, turned on the?my laptop as stated?and inserted?the X-Fi?
    Into the USB slot. The program asked for permission to run and i clicked yes. It download almost all the way and became stuck while installing the console, went from zero to 27% and stopped. I tryed it 8 times with the same thing happening. I went to the site and downloaded the software from there and the same thing happened. What am i doing wrong? Also when i inserted the unit in the USB slot and clicked on the speaker icon and pulled up the sound information, i see that the X-Fi mic is installed and working but i don't see the X-fi sound card? I checked every where! Also i tryed playing music in one of the music rooms and they said no sound, no sound! Is it just that this will not work with a Sony Vaio? Or am i doing something wrong? I am running vista 64 bit, 4 gig's of memory and daul core?processor and my Laptop is only months old. The laptop sound card is Reltek High Deff Audio. Any help would be great.

    the usb sound blaster x fi 5.1 pro thx does come with ddl but not dts connect.
    it works for games and movies using optical n get digital surround sound

  • Remote Audio Jacks for the Sound Blaster Audigy 2

    Hello My case has built in remote audio jacks on the front panel. Is it possible to hook up my Sound Blaster Audigy 2 ZS to this system? I have several individual cables that I connect to a sound card to provide remote audio jacks at the front of the PC. Is this possible? Thanks

    Are you are asking for something like this?http://audigy2zshowto.blogspot.com/

  • Will the dock keyboard for first generation iPad work with iPad third generation?

    Will the dock keyboard for first generation work with the new iPad third generation?

    It should, which is based only on the fact that the connections are remaining the same (the 30 pin usb connection)
    that said, the 3 is thinner and smaller than the first one, so if it's dependant on a tight fit it may not work exactly like it does on the 1.

  • Will the m-audio project mix i/o work with Logic X?

    Hi,
    I have a m-audio project mix i/o interface/control surface.
    Will this work with Logic X?
    Thanks,
    Mike

    If it works now on 10.8.4, then yes. This depends on OS X and drivers (if needed), not on Logic. Logic can only 'see' hardware that the OS can see.

  • How do you fix the sound on your phone if it works with headset only no ringing

    Everything works on my phone but the sound....I can plug headphones in and hear music but if no headphones are pluged in I hear nothing and when someone calls me I hear no ringing or anything?  Can someone please help me figure this out?
    Thanks

    Hi two864,
    If you are having issues with the audio on your iPhone, you may find the following article helpful:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Regards,
    - Brenden

  • Will the mid-04 AGP 2.5 DP work with PCI-X graphics (ati radeon 7000?)

    Got a G5 with a burnt out AGP slot, will it work with this? ---->http://www.ebay.com/itm/Apple-Mac-G4-G5-ATI-Radeon-7000-PCI-64MB-Video-Card-DVI- VGA-S-Video-TV-Out-OS9-/200710223413#vi-content

    Okay now is there any possible fix? I just turned it on and it the display came up just fine. But then I tried to boot it off of my powerbook from firewire and no show.I don't have it screwed down because I have been swapping cards but should I try that or are there any other suggestions?

  • Will the Apple mini DVI to video adapter work with a macbook? What to Buy?

    I went to my local Apple Reseller and asked for a mini dvi to video adapter to use to connect my macbook to a tv using either s-video or the yellow RCA cable. I was told that they only had the one that was for an ibook and Power book and that this would not work with a Macbook. I would need a different one. Is this correct. If so, what do I need? I have looked on the online Apple Store and cannot find anything that fits this description. They only list one type of Mini DVI to tv adapter? I just want to be able to connect my Macbook to a TV.

    As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
    Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
    To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
    The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
    ted.h.
    Mac Mini (Pro Duo) and MacBook (C2D)   Mac OS X (10.4.8)  

  • How can i purchase the Sound blaster audigy 2 ZS Notebook in New Zeala

    Hi,
    I am trying to buy this sound card for my laptop to improve the quality of music that comes out as it is very importent for my job.
    I am trying to buy it from www.soundblaster.com and they say they cannot sell it to me. Whats up with that? can anyone help me buy it's
    Thanks Sam

    Stokes,
    If you are in New Zealand, it's best to check with the support there for the nearest vendor that has the product available for your purchase. There is no online store available for this country.
    http://asia.creative.com/support/warranty/list.asp?ctry=6
    Jason

  • The sound has disappeared on Firefox but works with other browsers. Can anyone tell me how to fix this?

    I was watching a video of a musician on YouTube and all of a sudden, there was no sound. I tried it using Chrome and had no problem. I refreshed Firefox, but still no sound. Can anyone help?

    If you have problems with current Shockwave Flash plugin versions then check this:
    * see if there are updates for your graphics drive drivers
    '''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
    * disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    '''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
    * disable hardware acceleration in the Flash plugin
    '''https://forums.adobe.com/thread/891337'''
    See also:
    * '''http://kb.mozillazine.org/Flash#Troubleshooting'''

Maybe you are looking for

  • How do i connect my ipod to my windows 7?

    I connect my 5th gen to my windows 7 with the cable, but itunes doesn't see it, and it doesn't show up in my computer either. What do I do?

  • Video won't play in timeline or source monitor

    I recently purchased a Canon HG10 camcorder and have been attempting to edit the AVCHD .mts files using Premiere Pro CS4 (4.2.1). However, I have been unable to play the video in either the timeline or source monitor. Both the video and audio will pl

  • Prime Infrastructure issues with collection, dscp, mos, etc

    We have a virtual Prime Infrastructure appliance installed.  It currently shows collection status managed with warnings for several devices, i.e. Nexus 7k's, cat 3750x. cat 3850x.  It is not all stacks though, most are collected accurately only a few

  • My iphone 4s went dead, recovered and dies twice or more times a day after that

    My Iphone 4s was found dead during the day. I did a hard reset and manage to open it, asked me to restore it again and succesfully worked for less than a day. This is happening for the last 5 days. Today it went dead 5 times. I bought this device in

  • Reordering the presentation layer in BI Server repository

    Is there a way to re-order the presentation layer in the BI server repository? Currently if I add something new to a table in a subject area - it is always placed at the bottom. Also, if I add a whole new table - it is also placed at the bottom. I th