Will the System Migration Assistant Migrate all of my Passwords?

Hello,
I need to Migrate all of my password from my Lenovo X301 to my new Lenovo X1. Will the System Migration Assistant do this?
Thanks.

are you using thinkvantage password manager, if you are open TVPWM use the import/export to backup your passwords, copy to USB
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Similar Messages

Do I need to deactivate my Creative Suite 6 before I pickup my new mac pro? or will the migration assistant do all of that?

I am picking up my new mac pro tomorrow and wasn't sure if I needed to "deactivate" my Adobe products before I change over to my new Mac, or does the "migration assistant" do all the work? thanks for any help.

Nope. Migration does not work with any Adobe software. Don't even try it, it will cause a lot of huge problems.
Deactivate your software on the old computer. Install it from the original installer on the new one, don't forget to install all upgrades which are available in the meantime.

HT4796 I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac.

I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac

You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718

Migration Assistant: migrate only selected applications

I have a new Macbook Air and an old Macbook Air. Both on Yosemite. I want to migrate only selected (few) applications from the old to the new. Can I do that with Migration Assistant?
If not, how should I do it?
I don't want to migrate everything. Thank you!

It appears Migration Assistant is all applications or none.
Set up screen sharing between the 2 computers and copy what you want that way.

How will the system handle delta in the below scenario

How will the system handle delta in the below scenario
Day 1
DS--->DSO
PSA
Document Number| Customer | sales value
1001| RAMLAL | 10000
Your change log for DSO will read
Req1| 1001|RAMLAL|10000|N
DSO(overwrite)
1001|RAMLAL|10000|
Day 1
DSO--->Cube
Req1| 1001|RAMLAL|10000|
Day2
DS--->DSO
PSA
Document Number| Customer | sales value
1001| RAMLAL | 30000
Your change log for DSO will read
Req2 | 1001 | RAMLAL | -10000 | X
Req2 | 1001 | RAMLAL | 30000
DSO(Overwrite)
1001 | RAMLAL | 30000
Day 2
DSO--->Cube
Req1|1001|RAMLAL|10000|
Req2|1001|RAMLAL|20000|
Please explain with example
Scenario 1: Req1 & Req2 are deleted ONLY from change log on Day 3
On Day 4:
DS--->DSO
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000|C
What will happen to the Sales Value in the cube?
What will happen to the Req1&Req2 in the cube?
Thanks
Tanya

Tanya,
Please explain with example
Scenario 1: Req1 & Req2 are deleted ONLY from change log on Day 3
On Day 4:
DS--->DSO
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000|C
What will happen to the Sales Value in the cube?
What will happen to the Req1&Req2 in the cube?
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000 |C
--> Here 1000 is not correct value, as 1000 is change to 3000. It should be 3000. record should be as below.
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 30000 |C
--> As this data related to sales, and i hope you are using standard ABR extractors(Business Content).
ABR datasources delivers before and after images.
Before image:
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | -3000 |C
Before image:
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 0 |C --> value changed from 3000 to Zero.
If you are loading in additive or Overwrite into an ODS total sales for 1001 at end of day 4 will be Zero.
Hope it helps
Srini

We bought a new prepaid phone on 10/5/14 at a Verizon store had an existing phone number transfered and the phone can not be activate. When will the system be updated? We have lost 2 days of service.

We bought a new prepaid phone on 10/5/14 at a Verizon store. Had an existing phone number transfered and the phone can not be activatde. When will the system be updated? We have lost 2 days of service and now cannot use the original phone due to moving service to Verizon.

The exact same thing has happened to me! The customer service reps keep saying there is nothing they can do until their system upgrades are complete and they can't tell me when that will be! I need my phone number back!!! Somebody please help with this issue!

HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

Your admin account password.

Does Migration Assistant copies all iTunes/iPhoto data to the new Mac?

I currently placed all my iphoto and itunes data on an external harddrive in my current setup. I have a MacMini 2010. Im planning to upgrade its HARDDRIVE with a smaller capacity but faster SSD.
So here goes my question... (the fact is, i haven't tried Migration Assistant ever, hence these troubling questions..)
I would keep my old harddrive intact as it used to be. I would install the SSD on the MacMini and do a clean install of OSX Lion which is also the current version of my OS in the old HARDDRIVE. I'm planning to attach the OLD HARDDRIVE using an HD enclosure and connect it using USB/Firewire externally. If i use, Migration Assistant to copy my settings and files in the OLD HARDDRIVE, will it also copy all my itunes/iphoto data into the new SSD? (music and photo data that are stored in an EXTERNAL HARDDRIVE right now) - meaning itunes and iphoto data folders are in an external hard drive.
I'm pretty sure it wouldn't fit. Im hoping itunes and iphoto would just LINK all those files as it used to be on my EXTERNAL HARDDRIVE and NOT COPY it to my small capacity SSD.
Do you get it? Please ask me if you don't. I just want to make sure a smooth transition to the new SSD if i push thru.

You can restore your iPod to "New" which will erase every thing and install fresh iOS software or you can restore to a particular backup that you have previously created. In this case, your iPod Apps & data will appear as per the backup. Note that some content is not in a backup and will need to be synced back to the iPad from the iTunes music library or from, for example, the iPhoto photo library.

System Migration Assistent - Migrating Vista-- Windows 7

T61 + Vista
When I receive Windows 7, can the ThinkVantage System Migration Assistant move current Vista settings to Windows 7 or does the utility only work within the same OS?
Thanks,
Mark
Moderator Note; edited subject for relevancy
Message Edited by andyP on 07-15-2009 09:45 PM

Yes Mark, It should be able to. I see why no reason why it shouldn't work.
Moderator Note; edited subject for relevancy
Message Edited by andyP on 07-15-2009 09:46 PM
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Will migration assistant migrate a boot camp partition?

I am considering replacing my wife's IMac core2duo with a new IMac. Will the current Migration Assistant transfer the full operable boot camp partition to the hard drive of the new computer? If not, what is the easiest way to do this? I do use Carbon Copy Cloner as a back up, in addition to Time Machine. Thank you.

No it don't migrate the BootCamp partition! You can save the partition with WinClone to save and restore the windows partition.

Mavericks Migration Assistant - Migrate user data to a separate user drive?

I have a question about upgrading to Mavericks with a separate user drive that I haven't been able to find an answer to, so I thought I'd ask for some guidance before actually trying to attempt it.
I have a late-model Macbook Pro (A1260) running 10.8.5 happily with 2 hard drives inside - a smaller SSD boot drive let's call BOOT 1 DRIVE, and a larger drive I use for my user folder which I'll call USER DRIVE. Now it's time to upgrade to a little larger SSD let's call BOOT 2 DRIVE. I have Mavericks already freshly installed on it (10.9.1) with a temporary blank user account. The MBP boots fine into the drive connected externally so I know it's all ready to go - all I have to do is swap out the drives and I'm good on the OS.
Now the tricky part: I want to transfer my user data from my old system 10.8.5 to the new 10.9.1 and ultimately have it reside in the same fashion - on the larger USER DRIVE. How do I do this? A few scenarios I ponder:
A) I'm assuming because this is migrating from an older system to newer system, you can't just create a new user in 10.9.1 with the same user name and point it to the existing home folder in USER DRIVE, but instead have to use Migration Assistant to transfer and update 10.8 user data to 10.9 user data?
B) Locially, you would boot into BOOT 2 DRIVE (10.9.1), and use Migration Assistant to transfer user data from the old 10.8 system (the system knows that the user data resides on USER DRIVE) to the new one but there's not enough space on the new BOOT 2 DRIVE to house all the data and even if it could, then what ? - transfer the user folder directly to a clean USER DRIVE and then point to it?
C) I have both BOOT 1 DRIVE and USER DRIVE cloned on separate volumes, so I could boot into BOOT 2 DRIVE, wipe clean USER DRIVE, and then migrate from the cloned drives - except in Migration Assistant, it says to transfer from "another Mac or Time Machine, or a startup disk". Would I be able to pull from the USER DRIVE CLONE and then have Migration Assistant write to the freshly wiped USER DRIVE?
Perhaps I'm overthinking this? Google pointed me to this post which seems to have some of this information covered even though it feels dated. Reading through it makes me believe that Senario A is actually my closest bet with some user account name swapping or something? Is it that User data doesn't need to be "updated" for the newer OS and you can just create a new user account with the same name and point it to the older USER DRIVE?
Any advice from the mac smarts out there would be appreciated.
Thanks!

SOLVED!
In case anyone stumbles upon this and is wondering what I did:
My hypothesis was correct - waaayyyy over thinking it.
I installed BOOT 2 DRIVE, swapping out the old BOOT 1 DRIVE. Then I renamed the new account to the same name as my previous account, users -> advanced options -> and pointed to the same home folder on USER DRIVE.
DONE
Initially, I made a new account and screwed things up a bit - after reading the post of the above, understood that the new user account should have the same UID as the previous one....
Anyway, all good now - happy camper.

Exactly what settings does migration assistant migrate?

I am using migration assistant to transfer information to a new mac. My question is this: At the "Select Items to Migrate" screen you have the options of selecting Users, Applications, Settings, etc... Under the Settings Section, you can select/deselect "Time Zone" "Machine" and "Network." Exactly what settings in the Mac OS is transfered when you select Machine and Network? I know Directory Binding settings and computer name is transfered when you check "Machine." What else does "Machine" transfer? What network related settings are imported when you select "Network?"

Hold everything. I found my answer here: https://discussions.apple.com/message/11721764?messageID=11721764#11721764?messa geID=11721764
I used Google to search my terms and this one came up. It seems the search function on here is not as good as Google......as usual.

HT1296 i have an ipad with many application, will the first time sync erase all the data?

i have an ipad with many application installed on it, will the first time sync with itunes erase all the installed applications on the device?

The iCloud settings for the computer and other devices are in the iCloud preferences in System Preferences. If you open iTunes with your iPhone connected to the computer, select the iPhone under Devices in iTunes' sidebar, then click on the Info tab in iTunes' main window. Look at the various items you see listed. Be sure to check the Mail component for your GMail account because it is not an iCloud mail account. Your Calendar and Contacts components should state that they are being synced by iCloud.

Migration Assistant to Transfer User Acct - Password Changed?!?

I successfully used the Migration Assistant to transfer my files to a new MacBook Pro from my old one. When I did it, I wanted to replace my admin account with another from my old machine so I created a new one to complete the transfer. The files and account were brought over fine. Now, I wanted to log in as my admin account and it is not accepting the same password. I've retyped it a million times even trying to factor in the possible typos that could have occurred. Unfortunately, I did not set-up my admin account to be reset using my Apple ID (lesson learned) so that is not an option. Any other ideas?

Also, be aware that migrating a user account over pulls over that account name, so you don't have to create another account just for that.
Also, if the account you're pulling over is Admin equivalent on the old machine, it'll be admin equivalent on the new machine. If that's the case, you don't have a problem... just log in under that migrated account and modify whatever user account you wish.

Will the iStat menu meters show all 8 CPU's

My dual core 2007 Mac Pro was taken by a burglar. The 2.93 8 core Mac is ordered and am wondering if the iStat menu meters will show each 8 core processor in the menu? Any help will be appreciated.
Rachael

Hi Rachael,
I received an email from Marcel Bresink, the maker of HM and all those products on his pages, elaborating more fully on what the speed racer Mr. Smit said
"When you are using Mac OS X 10.5.6 or later on an Intel processor
with "Core i7" technology, the operating system will automatically
enable a processor feature named Simultaneous Multithreading (also
called "Hyper-Threading Technology" by Intel).
With this feature, each CPU core will support a second hardware
thread, simulating twice the number of virtual processors. Mac OS X
Leoapard does not and cannot distinguish between real and virtual
cores, so your machine is basically running as a 16-core system.
The virtual cores only reach 15-30% of the performance of "full"
processors, however.
Hardware Monitor correctly reflects this. The true and the logical
numbers of cores will be shown in the System Information window (cmd+4)
of Hardware Monitor."
Why not Activity Monitor? You've seen these oft forgot CPU gauges in AM, haven't you? I admit I was surprised. This is with 17 apps open, including PS4 and AfterEffects:
http://i528.photobucket.com/albums/dd325/senecat/ama.png

Will the System Migration Assistant Migrate all of my Passwords?

Similar Messages

Maybe you are looking for