Will the Volcano 7+ fit?

Will the Volcano 7+ fit in the mobo in my sig??
I dont want to come home and find out that it wont fit in the socket
Thats how the volcano 6CU fits atm...
and it is: 80x60x65 mm
Im not sure of the dimensions of the 7+..
But since the fan is parralel with the heatsink and its ( the fans ) dimensions are 70*70
It *should* fit...
Does anyone know for sure?
Thanks for the help

Me too,
It is a little sketchy during installation, I would recommend a shim for sure. The fan housing is just a little too big and getting the clip to catch the front hooks can be a bit of a challenge...you'll see. Just be careful.
Oh that pic in your post is way too big....really 8)

Similar Messages

Will the 27" IMac fit in my Hondas back seat?

Strange question I know, but I'm wondering if anyone has an answer. I'm picking up a 27" Imac on tuesday from a friends school. Got a super deal from Apple but it had to be sent to her school. Question is I have a Honda Accord and I'm wondering if I'm going to be able to get the box in the back seat and through its door. Does it come in an outer box and an inner box and if so will taking it out of the outer box fit and will it be dangerous trying to take it home that way.

eastvillager wrote:
Strange question I know, but I'm wondering if anyone has an answer. I'm picking up a 27" Imac on tuesday from a friends school. Got a super deal from Apple but it had to be sent to her school. Question is I have a Honda Accord and I'm wondering if I'm going to be able to get the box in the back seat and through its door. Does it come in an outer box and an inner box and if so will taking it out of the outer box fit and will it be dangerous trying to take it home that way.
No way to know for sure without trying, but I too would imagine you'd have no trouble. And if you did, you could always insert it into a deer carcass and transport it over the roof of your car.

Will the old cases fit the ipod touch 5 generation?

if someone could tell me if the old cases fit the new ipod touch i would be very grateful!!

No. The 5G is taller than previous iPods.
iPod touch 5g cases: Apple Support Communities
5th Generation iPod touch cases / accessories | Jeffs iWeb Blog

Will the ipad 2 fit in a ipad 3 case?

I have a ipad 3 case and I was wondering if the ipad 2 will fit in it. Or if anyother iPads will.

I should add this: 0.03 inches of depth was added after the iPad 2. But Apple's cases fit all three. I think other cases will also.

Will the Graphic card fit?

I am planning to buy a 200 pound graphics card. Nvidia GTX 670 and I was wondering before I splash out on cash that it will fit in my dektop. I also want to know will I definetley have to buy another psu. If so what is the best one that will fit?
Here is my PC: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5330783&spf...

The only sure method is to measure. Here is a guide. Without measuring, it's anyone's guess.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Will the geforce 6800 fit in msi k8n neo ms- 7030 ??

please see this picture
http://www.hardwarezone.com/img/data/articles/2004/1247/msi_capacitor_bloc.jpg
http://www.hardwarezone.com/articles/view.php?id=1247&cid=6&pg=12

Might help a tad:
https://forum-en.msi.com/index.php?topic=86098.0

Will the optical drive from a 14" iBook G3 fit and work in a 12" iBook G3?(

The logic board in my 14" G3 finally died (after two replacements). I've got a 13" G3 that works great, but has the CD-ROM optical drive.
Will the combo drive from the dead 14" fit in the 13" (and, more importantly, will it work)? I'm not afraid of the disassembly - I've replaced iBook hard drives before, so I know the drill - but I don't want to start on the job, only to find that the drive won't fit or won't work.
I've read some posts online about master vs slave settings, HD jumpers, and so forth, but I don't think they're talking about a swap job like this.
Any help and advice is greatly appreciated.
Dick

Dick,
Here's the Apple part numbers for the 14" and 12" from the manuals:
14"
Optical Drive
CD-ROM 661-2667
CD-RW/DVD-ROM 661-2683
CD-ROM 661-1775
COMBO 661-1776
12"
Optical Drive Assembly w/Bezel
CD-ROM 661-1775 (Good)
Combo 661-1776 (Better)
So the numbers seem identical hard to tell from the info I have if the cables are the same but even if they aren't there are usually just adapters that screw into the back to adapt to different cables. Since you have both iBooks you'll have those adapters.
There also seem to be differences in the bracketing but you'll also have those so I'd give it a try.
Oh and also the bezels might be different.
Richard

Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display: will the cable fit?

Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display: will the cable fit?

Sorry it won't work. It will fit but the laptop can't communicate with it. Please see many of the other threads here, specifically this one just above your post, that is discussing this exact question.
Apple's specs for the ThunderBolt display state that it needs a ThunderBolt-enabled computer. Your laptop has a mini-display port connection so it is not compatible with the new displays.

At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none lightening fitting that I want.

At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none lightening fitting that I want.

I wonder if this comment on the Amazon site is the answer to my problems?
PLEASE NOTE: In order to provide the same power output as an original 3 ft Apple USB cable, the housing of our 6.5 ft cables need to be a bit larger. Due to the larger head size, it will not be compatible with some cases that have a smaller charger opening
If that is the case then I am stuck with the Griffin one or just use the original.
Thanks for your observations guys

Will the new iPad cases fit on an IPad 2

Will the new iPad cases fit on an IPad 2?

It appears that it only fits the new iPad. Here is the description page. Go down to the lower left corner where it talks about compatibility.
http://www.targus.com/US/productdetail.aspx?regionId=7&sku=THZ15601US&PageName=T argus%20Versavu%20%7C%20Targus%20USA&productCategoryId=5&bucketTypeId=0&searched Terms=Targus%20Versavu&navlevel1=&cp=&bannertxt=Search%20Results%20Targus%20Vers avu
This one fits the iPad2 and it is a VersaVu
http://www.targus.com/US/productdetail.aspx?regionId=7&sku=THZ045US&PageName=Tar gus%20Versavu%20%7C%20Targus%20USA&productCategoryId=5&bucketTypeId=0&searchedTe rms=Targus%20Versavu&navlevel1=&cp=&bannertxt=Search%20Results%20Targus%20Versav u

Will the case mate tough extreme case for the iPhone 5 fit the 5c phone

I am having trouble finding a case tht will fit the 5c. Will the Case Mate Tough Extreme fir the 5c

No it won't. The dimensions are different.

Will an iPad case fit the new iPad Air 2

Will an iPad case fit the new iPad Air 2? I found a charging case for an iPad but it doesn't specifically say for iPad Air 2.

No, it will be too large.

Will the mini iPad Logitech keyboard fit the new retinal display mini iPad?

Will the new mini iPad fit the original mini iPad keyboard cover by Logitech.

There's a fraction of a millimeter between them. So if the case is hard molded plastic, probably not. But if it's a more forgiving case, like a leather slip in case or the such, you should be ok.

Will the standard iPad case fit the the iPad Air or is there a specific type case for the iPad Air?

Will the standard iPad case fit the the iPad Air or is there a specific type case for the iPad Air?

The air is different dimensions from other iPads, so look for cases made specifically for it. I know that Targus has some, so does Zagg and i'm sure other manufacturers do as well.

Will the new ipod touch have the same fitness, no shoe insert, ability that the new nano will have

Will the new ipod touch have the same "fitness", no shoe insert needed, ability that the new nano will have?

Yes, it acualy does, witch I found suprising.

Will the Volcano 7+ fit?

Similar Messages

Maybe you are looking for