Will there be a 802.11n enabler for my core duo MBP in the future????

I bought this mbp for 2400. and you are telling me i cant even take advantage of the 802.11n when it comes out. Does anyone have NEWS on whether the core duos will have support for the 802.11n.

<hr>i hope we mbp CD owners can swap the non 802.11n cards for the newer 802.11n cards in the mbp C2D... let's see.
actually it would be nice if someone from apple could post here if that's possible, and if not, why....<hr>
Based on Apple's past track record, I don't see it happening. However, as I've pointed out in at least one other thread, all hope is not lost: For $119 you can get an 802.11n ExpressCard from Belkin. With the Airport card in the MBP turned off, you'll probably get about the same battery life.

Similar Messages

  • 802.11n Enabler for MacBook Pro not included

    Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
    Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    Regards
    Peter

    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
    There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

  • AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

    Hello,
    I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
    Thanks

    Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
    Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
    BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
    Message was edited by: luvlabs

  • AirPort Extreme 802.11n* Enabler for Mac

    I just downloaded the enabler for my 20" iMac and when I try to install it, it states "Your computer does not meet the hardware requirements for this update." It's my understanding that only the 17" iMac and the Mac mini aren't supported. Anyone else experience this?

    If you recently got you imac and it's a core 2 duo, check if you already have it installed using this quote form appleinsider.com
    The company recommends that customers check to make sure that their Mac does not already have the 802.11n enabler installed before purchasing the software patch. To do so, Intel Mac owners should open the "Network Utility" application (found in the Applications > Utilities folder), choose "Network Interface (en1)" under the "Info" tab, and then inspect the information provided under "Model: Wireless Network Adapter." If it says "(802.11a/b/g/n)," the Mac already has the 802.11n enabler installed. If it says (802.11a/b/g), the Mac does not have the 802.11n enabler installed.

  • HT1045 WILL THERE BE ANY MORE "ADDITIONAL CONTENT" FOR LOGIC...  BY THE WAY LOGIC IS A WINNER...10/10  NO MORE PRO TOOLS FOR ME

    Ok i downloaded all the jampacks... love them love them love them... I've used ma ny of the sounds...was wondering are there any user created sounds or any more content to be added....i would love to have a few more sounds and guitars....logic is soo good for that roots reggae sound... blew my mind away ....i'm in awe....anyway anyone know where i can get more content such as guitars and live drums...lemme know thanks
    Sufferahsmusic
    <Link Edited By Host>

    I totally agree but for whatever reason they don't at the moment....
    I just read that apple is providing updated printer driver packages sometimes (they just released packages for samsung, canon, gestedner etc.) so it seems they do take care about these issues.

  • 802.11n* Enabler will not install

    hey guys.
    I have purchased my copy of the 802.11n* Enabler for my 20" iMac Core 2 Duo 2GHz, but I keep getting a message saying "Your computer does not meet the hardware requirements for this update.".
    My iMac meets all of the requirments as far as I know (Leopard 15.5)
    I also tried installing it on my Macbook (Tiger 14.9) but I get the same message.
    any thoughts as to why this is and how I can fix it??
    thanks
    GK

    Airport Extreme refers to my wireless card build it right, and not my router (which is not an airport, but is an "n").
    Apple uses the term "AirPort Extreme" for the built-in wireless on the newer Macs so it tends to get confusing when they use the same term for their base stations. In this case, the "n" enabler is a firmware update to the built-in AirPort Extreme in your iMac. Similarly the "AirPort Extreme Update 2007-002" is a software update for this same built-in device. All firmware updates to the base station itself are done through the AirPort Utility.
    I'm not sure why you are having difficulty updating your iMac as it appears, according to your description, to be eligible. To double-check, that it may already be installed take a look at this Apple article: How to tell if 802.11n-enabling software is installed

  • AirPort Extreme 802.11n* Enabler Problems

    I just bought the AirPort Extreme 802.11n* Enabler for my 2 GHz MacBook with and Intel Core 2 Duo processor recently and when I try to install it, it tells me, "Your computer does not meet the hardware requirements for this update." I have installed all of the software updates that are available and it is still not working. Anyone have any ideas?!

    There isn't much you can do... There are ways of taking apart your macbook and replacing the Airport extreme card inside but it probably isn't worth it. I guess thats about it.
    Just next time, make sure you check what hardware you have before buying.

  • Where is the 802.11n Enabler??

    I can't seem to find the 802.11n Enabler for $2 on Apple's store.. how can I find this?

    It's there. Here is the link.

  • 802.11n Enabler-States I do not meet the h/w req. but I do... Pls look

    Good day.
    My mac book 13" is a core duo, I purchased the 802.11n enabler and now getting an alert stating the computer does not meet the hardware requirements for this update.
    Does anyone know what I'm getting this. based on the spec that apple give on the enabler page this should work.
    Thank you for looking.
    Tom

    auriburu, Welcome to the discussion area!
    Please don't post your email address in a public forum. You never know who is going to pick it up.
    First use KB 301724, How to identify your iMac to identify what type of iMac you are having a problem with.
    Then click on the appropriate icon below to visit the area for that iMac and post your question there.
    iMac (CRT) G3 iMac (Flat Panel) G4 iMac G5 Intel-based iMac Aluminum Intel-based iMac

  • 802.11n Enabler does not work!

    I have a MacBookPro with Core Duo. I bought an AirportExtreme Basestation and installed the software... it showed me that it also installed the 802.11n Enabler. BUT: when I go to the network utility program and select "en1" it still only shows a/b/g compatibility. I re-installed a few time, but it wouldn't change.
    This, of course, has also the effect that when selecting the 5GHz 802.11n at the basestation, my computer wouldn't find the basestation at all (have to reset it afterwards).

    The 802.11n enabler works in Macs with the Core 2 Duo processors, not the Core Duo. I understand that you can upgrade the wireless card by buying a replacement from Apple.
    There are other threads here that describe doing this.

  • Airport Extreme 802.11n Enabler wont install

    hi,
    i just bought the Airport Extreme 802.11n Enabler for my MacBook Intel Core Duo. when i opened the disk image and tried to install, i got an alert saying my computer does not meet the hardware requirements - even though it is a MacBook Intel Core Duo.
    i followed all instructions on the Apple Store page before purchasing, including checking my Network Utility to verify whether i needed the software. currently i only have the 802.11 a/b/g adapter. see:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/canadastore.woa/wa/RSLID?mco=B4 8E8262&nplm=D4141ZM%2FA
    any suggestions? my MacBook is a week 25 model.
    thanks,
    gimiwan

    Your computer needs to be a Core 2 Duo-based Mac for the enabler to install, as the necessary hardware isn't present on an older processor or a 1.83GHz 17-inch iMac. If your computer supports the enabler, install this software and try installing the enabler again.
    (19825)

  • How to get 802.11n speed for Apple TV?

    I installed my first Apple TV yesterday. Great stuff!
    My iTunes movie library is on a Core 2 Duo MacBook Pro. I have not yet used the AirPort Extreme 802.11n Enabler on this MacBook, since I just found out it exists. If I use it, can I utilize 802.11n sync speeds with the Apple TV? How?
    My AirPort network uses only an "old" 802.11g AirPort Extreme base station, not the "new" AirPort Extreme base station with 802.11n.
    I have three 802.11g AirPort Express base stations on my network, mainly for using AirTunes.
    My iMac connects to my wireless network using 802.11g, and I don't think the 802.11n Enabler works with it.
    My cable modem current connects to my Airport Extreme (802.11g) base station via Ethernet.
    I understand I can get a new AirPort Extreme 802.11n base station to replace the 802.11g one, and that would let me use the higher 802.11n speed from the MacBook to the Apple TV. It would also allow (unless I misunderstand) all my 802.11g devices to access the network at the lower speeds they are capable of. Correct?
    I also understand there is something called a "dual band network" that involves using both base station types in one large network, but I don't know what the advantage of doing that would be, compared with just replacing the old base station. Can someone fill me in on that?
    And, is there any way to get 802.11n speeds from the MacBook Pro to the Apple TV without getting an 802.11n base station?
    Thanks in advance.

    If I use it, can I utilize 802.11n sync speeds with the Apple TV? How?
    And, is there any way to get 802.11n speeds from the MacBook Pro to the Apple TV without getting an 802.11n base station?
    No. Unless you set up an adhoc network between your Mac and the Apple TV.
    I understand I can get a new AirPort Extreme 802.11n base > station to replace the 802.11g one, and that would let me > use the higher 802.11n speed from the MacBook to the Apple > TV.
    Yes, it would.
    It would also allow (unless I misunderstand) all my 802.11g devices to access the network at the lower speeds they are capable of. Correct?
    If you set things up this way, then I believe you wont be able to use wideband mode on the AEBSn. Your AEBSn will be opperating in mixed mode and its 802.11n performance will be degraded. The best set up would be to keep your old router to service the G only devices, and have your new AEBSn service the N capable devices. This would allow you to take full advantage of the performance increase provided by 802.11n capable devices.
    Message was edited by: ctomer

  • 802.11n update for the iMac

    I have a 20" 2 GHz Intel Core Duo iMac w/2 GB RAM 667 MHz.
    I bought and am trying to install the 802.11n upgrade to run and it tells me "your computer doesn't meet the hardware requirements".
    I have the latest firmware.
    Apple's website states "If you have a Mac with an Intel Core 2 Duo processor (except the 17-inch, 1.83GHz iMac) or a Mac Pro with AirPort Extreme, you can enable it to access an 802.11n wireless network using the AirPort Extreme 802.11n Enabler software."
    So it should work.
    Is there anyone that can give me a clue?

    Contact Apple by phone, using the number on the online Apple Store web page. If you explain nicely, they will probably credit the $2 back. I believe the only reason they are charging that $2 is because there is some accounting rule that says if a significant new feature is added to a product that was previously not advertised, the business must charge a fee for it (or something to that effect - I'm not an accountant). Apple is not trying make a profit from this updater.

  • 802.11n Enabler Doesn't Want To Install

    I have a new MacBook 2.0 GHz Intel Core 2 Duo and when I downloaded the new Airport Extreme 802.11n Enabler it tells me that my computer doesn't have the correct hardware. I am missing something here? Everything I have read tells me that this should work and this hardware should be built in. Let me know if you have any insights...thanks

    Grahamstine, Welcome to the discussion area!
    Are you certain that your MacBook has the 'Core 2 Duo'? There are 2 different 2 GHz MacBooks. One has a 'Core Duo' processor and the other has a 'Core 2 Duo' processor.
    Go to the Apple menu and select "About this Mac". It will tell you what type of processor your MacBook has.
    If your MacBook does have a 'Core 2 Duo' processor, ensure that you have installed the AirPort Extreme Update 2007-001.

  • Aiport extrem 802.11n enabler doesn't work

    Hi everybody
    I purchased a belkin N1 Wireless router. This allows the n connection and therefore I also purchased the 802.11n enabler.
    The problem is, that this enabler says that I doesn't have the required hardware.
    I have a MacBook Pro (Intel CoreDuo). What did I wrong?
    Can anybody help me there?
    Thanks in advance
    PS: I also installed AirPort Extreme Update 2007-002

    MacBooks with Core 2 Duo processors are eligible for the 802.11n update, but not the earlier MacBooks with the Core Duo processors.

Maybe you are looking for