Will there be conflicts opening applications that are cloned?

I just cloned my Hard Drive to a back up drive and plan on installing a new 500GB Hard Drive into my G5. When I initialize and install the Mac OS X on the new 500 GB Hard Drive, will there be a conflict with opening applications on the cloned/backup Hard Drive? Thanks.

Hi-
It would be best to use applications that are installed on the same drive as thr OS X boot drive.
Some will be ok (as you described) many won't.
After installing the OS on the new drive, I would advise installing applications, as well, or, migrating them from the backup drive.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

Similar Messages

HT4623 I recently upgraded my i-phone 4s phone with the new iOS7. Since that all the applications that I have opened will not close. How do I close applications that are running in the background?

I recently upgraded my i-phone 4s phone with the new iOS7. Since that all the applications that I have opened will not close. How do I close applications that are running in the background?

Double click your Menu button and swipe up the open Apps to close them.......

I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there. Will my iphone sync the dates that are on the phone and add them to the ical? Or will it delete everything

I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there. Will my iphone sync the dates that are on the phone and add them to the ical? Or will it delete everything

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

Authorize the computer in iTunes -- Store>Authorizie this computer. Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
Transfer purchases.
http://support.apple.com/kb/HT1848

HT4623 In my iphone currently there is ios 6.1.2 .. if i update it into 6.1.3 can i have to do repurchase or reinstall all the applications that are currently working on ios..?

In my iphone currently there is ios 6.1.2 .. if i update it into 6.1.3 can i have to do repurchase or reinstall all the applications that are currently working on ios..?

Perform the Update using iTunes on the computer you usually Sync and Backup to...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?

When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?

Make sure your browser is closed and check to see if there are any processes related to Acrobat still running. If you are using Windows, Control-Alt-Delete > Processes tab. Look for AcroRd32.exe or Acrobat.exe or Acrotray.exe and stop these processes from running before you try your update again. A good ol' computer reboot might do the trick for you too.

Can not update the applications that are part of the Technical Communition Suite (TCS) 4.

The updates... menu is grayed out for all applications that are part of this suit. I know that FrameMaker (FM) 11.0 has updates that should be installed. I have downloaded a patch (11_0_1) for FM and it will not install. I get this message:
I have Admin rights on the computer and have selected Run As Admin.. when I attemp to install the patch.
I have TCS 3.5 also loaded and do not have any issues with loading updates.
OS: Windows 7
Any ideas as to why I can not install updates for the applications that are part of TCS 4?

Hi,
Greetings from Adobe.
Please go to C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
There will be a .dat file by the name - AdobeUpdaterAdminPrefs.dat
Capy this file and paste it on your desktop.
Open that file in Notepad from desktop.
Change the value in <Suppressed> tag to ”0” from "1"
<Preferences>
<Suppressed>0</Suppressed>
</Preferences>
After saving the bat file replace it back with the original file at location: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
close the window and then try to install the patch again.
Regards,
Mayank

Query all applications that are connected to database in the current time

Dears,
I need to query all applications that are connected to database in the current time. I tried using v$session but i could not reach through it to the application that are logged now to database.
As example, i connect to DB through Web Application and tried to search in v$session to can see Web Application session but i did not see it :(
From searching in google, found that there is a package named "DBMS_APPLICATION_INFO". I expected that it can help me in my request but i could not use it.
Please, advise me. Is this package help cover my requirements or there is another method ?
Thanks & Best regards,

sybrand_b,
I think that i appreciated you once you replied me and what i wanted exactly from you "Provide me Link help me more for investigation" and you did not provide something.
Where is the documentation that i could not read it !!!!!!
FYI, you are not the only one that have information_
Anyway ,as usual i will reply you in polite way.
Thanks and i will not have more input here with you !!!
Dear All,
Sorry for wasting your time to read this but i had to reply.
Please, if any one have more information regarding my issue, it will be highly appreciated.
Really , thanks all for support.
Thanks & Regards,

What will going to happend with app that are not ready for IOS 5?

What will going to happend with app that are not ready for IOS 5?

Most applications will work just fine. I typically have 150 or so apps installed, and typically only 1 or 2 will "break". The vast majority of apps will continue to operate just as well as before if not better. iOS developers are privy to beta testing the upcoming OS, so the week or so before and after the official release you'll see a larger number of apps needing to be updated than normal. Last night I updated 23 apps, and you'll see alot over the next week or two getting updates. Most are making minor changes to take advantage of new APIs, or add a new feature based on a new function of the OS (like twitter integration into the OS for example). Very few apps, (maybe 3-4 percent??) actually are getting updated because they're broken, but there will be a few. Most of the time, any apps that would break will have already been addressed in an update prior to the release of the new OS, and you've probably already updated that app so that it will work seamlessly and perfectly after the update hits.

I have an old (first generation) iMac that I still use sometimes for the applications that are on it. I was using it yesterday and unfortunately had a power cut. I went to turn it on today, and nothing at all happens. It's as though no power is getting to

I have an old (first generation) iMac that I still use sometimes for the applications that are on it. I was using it yesterday and unfortunately had a power cut. I went to turn it on today, and nothing at all happens. It's as though no power is getting to it. I've checked the obvious things, changed the fuse, tried different cables, poked paperclips in reset holes, but nothing doing. I wonder if there is anyone who knows what might be wrong. I was hoping to get some of its content transferred soon, but I'm guessing that can't be done if it can't be started up. Many thanks, if you can help

Hello,
>It's as though no power is getting to it.
Would it be correct to assume that no sounds at all can be heard? Also, no lights, not even green or amber at the power button?
>unfortunately had a power cut.
Was it possibly a power cut in connection with a thunderstorm? Any other evidence of higher than normal voltages (light bulbs, et cetera)? Has the line voltage been checked (measured with an appropriate voltmeter/multimeter)?
If necessary, it would be possible to remove the hard drive, and then connect it to an external IDE/ATA to USB adapter (example below). That way you could gain access to files on the hard disk from another computer.
http://www.newertech.com/products/usb3_universaldriveadap.php
Jan

How to detect which applications that are currently running

Hi there. Is there a way to detect which applications that are currently running on my machine? Is there a class that can get all of the running applications, you know, like the taskmanager.
//peter

What you are asking for is indeed not possible through "100% Pure Java," because each operating system that runs Java Virtual Machines can handle the running processes differently (think about the differences between a process scheduler for, say, Windows NT and your Palm Pilot, both of which could have a JVM running).
That means there are essentially 2 avenues to persue for this:
1. Use an external "user-level" command (like ps on a UNIX-like OS) and parse the results (this is what people are referring to when they say "Runtime.exec()". There have been some nice exec() frameworks posted around here before, so I'd recommend searching around a bit for more info.
I also found this link (from Google) which apparently shows the javadocs where someone has attempted something similarly on the Linux platform before...that's all I know about it:
http://www.cougaar.org/software/9.2/javadoc/api/org/cougaar/tools/server/system/linux/LinuxProcessStatusReader.html
2. Use a JNI (Java Native Interface) call to an externally provided C function to get the info you need. Here's a link to the Java 1.4 JNI information:
http://java.sun.com/j2se/1.4/docs/guide/jni/
Hope this helps! (But it's not going to be a quick and easy problem to work with)...
-J

When will there be an itunes update that resolves the compatibility issues with windows 8

When will there be an itunes update that resolves the compatibility issues with windows 8

I hadn't heard there are issues. Can you tell me what the issues you have run into are? I just downloaded it yesterday on my new laptop and I am having issues syncing today...

How to finds applications that are still running?

How do I find applications that are running on my computer? I can't install a new version of Google Drive because I get the message that this application is open. When I bring up the panel to do a force quit I do not see that application listed. Once I find the app running how do I quit it?
Thanks for any tips.
Bryan

Use Activity Monitor (in /Applications/Utilities). After opening it, go to View menu (on the menu bar) > All Processes, and quit the processes related to the apps that the installer needs.
Another way is to start up in safe mode by holding the Shift key while your Mac is starting. This allows you to install any application without any problem, as no third-party apps are running

"this computer is no longer authorized for applications that are installed

"this computer is no longer authorized for applications that are installed on the ipad "name of ipad" Would you like to autoriize for items purchased from the itunes store?
if you do not autorize ....
Why am I getting this message I only have 1 computer the ipad connects to, it hasnt changed so why do I suddenly have to autorize it again????

I've gotten the same issue now on my ipad.
My mac mini is authorized. I only have ONE itunes account. I sync my original ipad today and I get this message. So i say sure authorize, even tho it is. Enter login and password, comes back with this computer is already authorized. I knew that but ok. hit ok. Up pops message that this computer is no longer authorized, blah blah blah. Ok ill try again. Authorize credentials entered. Get message that computer is already authorized. Itunes is most recent 10.2.1. Ipad is updated to 4.3.1.
I deauthorized computer and reauthorized it. Still get loop.
google for solutions, find lots of problems, no answers outside of reinstall itunes and it "might" work, but not for everyone. Not gonna do that yet.
Figure Ill call, I mean its not that an old a device and its surely a bug in the software, I havent changed a single thing since I last synced and only tried got the sync message when i plugged it in to update the OS.
/rant on Go through a gazillion voice prompts and question, finally get operator and he'll help me if i spend 80 or 30 bucks depending on the service program I want. Yah know thats just total #$%@.
How about some customer service eh? How about posting a solution to the forums. If you dont have one, at least tell people that.
I get the same bit of attitude when I walk in the apple store. Love the products, have been an apple user since the IIe, but I just want the products I bought from you, the software that I get from you, the music that I buy from you, the apps that I buy from you, etc etc to WORK with each other.
/rant off
has anyone seen a solution for this.

API call that will list the meetings of employees that are assigned to a manager

Hi,
What is the API call that will list the meetings of employees that are assigned to a manager? The manager will be logged in and when I use the API call:
http://[serverid]/api/xml?&action=report-my-meetings&principal-id=[##]
I always get the same results which is a list of the meetings for the manager. If put the id of the employee, I still get the managers meetings.
I have looked through all of the API documentation and cannot find which call I could make to get the results that I want. The documentation specifically says that report-my-meetings provides information about meetings that the logged in user is scheduled to attend. So how do I get the information for the managers employees?
What is needed is the Name, Duration, and Start Time of all meetings that the employee is enrolled in who is assigned to the manager that is logged in.
Thanks for any help with this!

I posted this in the wrong forum and have moved it to the XML forum.

Will there be conflicts opening applications that are cloned?

Similar Messages

Maybe you are looking for