Will there be generators for Data Modeler

Are there plans to add any generators to SQL Data Modeler? This would be similar to what we had in Oracle Designer. One of the nicest things with Oracle Designer was that we could interview the End Users, build the ERDs and FHDs based on the interviews, push them down to tables and modules and menus, then generate those with Forms and Reports and then show the End User the prototype. This would provide the feedback if we were in the right track or not very early on in the design process. Since we had the data model transformers, we could modify the logical model and then re-push the changes.
With DM 3.0 and all that it provides on the modeling side, will some form generators for a user interface be provided?
Thanks in advance,
Scott

That last statement, question should read:
With DM 3.0 and all that it provides on the modeling side, will some form of generators for a user interface be provided?
Edited by: ScottK on Feb 23, 2011 10:23 AM

Similar Messages

  • Generators in Data modeler?

    Does anyone know if there will be any generators in SQL Data Modeler other than the DDL generators? Or will has Oracle dropped the concept of generators with the end of life for Oracle Designer?

    Unfortunately, I think Oracle has given up the generators, but Data Modeler does have "Transformations" as well as the "Reporting Schema" which allows you to build your own generators...
    Regards,
    Marc de Oliveira

  • Best approach for Data Modelling.

    Hello Experts
    I am building a Customer Scorecard involving SD and Marketing in BI 7.0.
    There are a couple of existing DSOs, some pushing the data into InfoCubes and some don't. All the reporting is happening from MultiProvider sitting on top of these Data Targets.
    The team has a primitive design which says that I additional DSOs be created to extract data from the above mentioned couple of DSOs based on only the Objects that are needed for Customer Scorecard reporting.
    This means, I am creating a couple of DSOs as per the current design which is in place.
    Upon suggesting to only create a Customer Scorecard MultiProvider on top of the already existing couple of Data Targets (avoiding to recreate addtional DSOs and the hassles of loading and activating them and then loading the data into InfoCubes) and then create the BEx Queries on top of them, the Lead expressed his concerns about the impacts it could have on the existing Data Model and subsequent transports once the Model is complete..!
    What is the best practice to handle a situation like this? I see there are 3 ways to go ahead with this:
    1. Do as the Lead said, which means creating additional DSOs (extracting data from a couple of required existing DSOs, push this data into 1 InfoCube and then create a MultiProvider on top of this (be aware that there is another similar data model that I need to create which will also be embedded into this MultiProvider) and create BEx Reports from there.
    2. Create only the InfoCubes which will extract data from the already existing DSOs (avoid creation of additional DSOs) and then create a MP from where BEx Reports are created.
    3. Only create a MultiProvider on all the required and already existing DSOs and InfoCubes, making sure if reporting needs aggregated data for reporting or not and then create BEx Reports from there (avoid creation of additional DSOs, & ICs).
    Note: We use Rev-Track to do the Transports.
    Which one do you think would be the best way to go and what could be the implications? Eventually, the reporting is done in WAD.
    Thanks for your time in advance.
    Cheers,
    Chandu

    Hi,
    Case 1 and 2 have similarities. But its purely depend user needs.
    I think you may be know the difference between dso and cube.
    DSO - holds detailed level data
    Cube - holds aggregated data.
    As per you needs use any one target only, no need to use DSO---> cube flow for existing flows.
    you can decide which you want use DSO or Cube only.
    Case 3. if your requirement will suffice with existing dso and at reporting level if you can manage to get the required out put then you can with it. But as my guess with existing target your requirement may won't suffice your needs.
    About transports:
    You can create one Rev track and assign multiple transports to it.
    you can add and release transport one by one rather than all at a time.
    if you release all at a time you may get some inconsistency issue and TR won't be released.
    Thanks

  • When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

    When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
    The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
    Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
    MacBook Air (mid 2012), OS 10.10,  HP Officejet 7500a

    This is what appeared on Console:
    11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
    timestamp: 12:42:32.557 Wednesday 12 November 2014
    process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
    code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
    #exceptions
    11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
    11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
    11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
    11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
    11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
    11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    Not sure what any of this means.

  • Using CVS in SQL Developer for Data Modeler changes.

    Hi,
    I am fairly new to SQL Developer Data Modeler and associated version control mechanisms.
    I am prototyping the storage of database designs and version control for the same, using the Data Modeler within SQL Developer. I have SQL Developer version 3.1.07.42 and I have also installed the CVS extension.
    I can connect to our CVS server through sspi protocol and external CVS executable and am able to check out modules.
    Below is the scenario where I am facing some issue:
    I open the design from the checked out module and make changes and save it. In the File navigator, I look for the files that have been modified or added newly.
    This behaves rather inconsistently in the sense that even after clicking on refresh button, sometimes it does not get refreshed. Next I try to look for the changes in Pending Changes(CVS) window. According to the other posts, I am supposed to look at the View - Data Modeler - Pending Changes window for data modeler changes but that shows up empty always( I am not sure if it is only tied to Subversion). But I do see the modified files/ files to be added to CVS under Versioning - CVS - Pending Changes window. The issue is that when I click on the refresh button in the window, all the files just vanish and all the counts show 0. Strangely if I go to Tools - Preferences - Versioning - CVS and just click OK, the pending changes window gets populated again( the counts are inconsistent at times).
    I believe this issue is fixed and should work correctly in 3.1.07.42 but it does not seem to be case.
    Also, I m not sure if I can use this CVS functionality available in SQL Dev for data modeler or should I be using an external client such as Wincvs for check in/ check out.
    Please help.
    Thanks

    Hi Joop,
    I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
    David

  • Will there be support for Adobe Ideas with the Adobe Ink and Slide?

    Will there be support for Adobe Ideas with the Adobe Ink and Slide?

    We're working on an update to Ideas to add support for Ink & Slide.  Stay tuned for further information as to timing.
    Kim
    Adobe Ideas Team

  • Sharepoint 2013 Reporting Services & OLAP Cubes for Data Modeling.

    I've been using PowerPivot & PowerView in Excel 2013 Pro for some time now so am now eager to get set up with Sharepoint 2013 Reporting Services.
    Before set up Reporting Services  I have just one question to resolve.
    What are the benefits/differences of using a normal flat table set up, compared to an OLAP cube?
    Should I base my Data Model on an OLAP Cube or just Connect to tables in my SQL 2012 database?
    I realize that OLAP Cubes aggregate data making it faster to return results, but am unclear if this is needed with Data Modeling for Sharepoint 2013.
    Many thanks,
    Mike

    So yes, PV is an in-memory cube. When data is loaded from the data source, it's cached in memory, and stored (compressed) in the Excel file. (also, same concept for SSAS Tabular mode... loads from source, cached in mem, but also stored (compressed) in data
    files, in the event that the server reboots, or something similar).
    As far as performance, tabular uses memory, but has a shorter load process (no ETL, no cube processing)... OLAP/MDX uses less memory, by requiring ETL and cube processing... technically tabular uses column compression, so the memory consumption will be based
    on the type of data (numeric data is GREAT, text not as much)... but the decision to use OLAP (MDX)/TAB (DAX) is just dependent on the type of load and your needs... both platforms CAN do realtime queries (ROLAP in multidimensional, or DirectQuery for tabular),
    or can use their processed/in-memory cache (MOLAP in multidimensional, xVelocity for tabular) to process queries.
    if you have a cube, there's no need to reinvent the wheel (especially since there's no way to convert/import the BIDS/SSDT project from MDX to DAX). If you have SSAS 2012 SP1 CU4 or later, you can connect PV (from Excel OR from within SP) directly to the
    MDX cube.
    Generally, the benefit of PP is for the power users who can build models quickly and easily (without needing to talk to the BI dept)... SharePoint lets those people share the reports with a team... if it's worthy of including in an enterprise warehouse,
    it gets handed off to the BI folks who vet the process and calculations... but by that time, the business has received value from the self-service (Excel) and team (SharePoint) analytics... and the BI team has less effort since the PP model includes data sources
    and calculations - aside from verifying the sources and calculations, BI can just port the effort into the existing enterprise ETL / warehouse / cubes / reports... shorter dev cycle.
    I'll be speaking on this very topic (done so several times already) this weekend in Chicago at SharePoint Saturday!
    http://www.spschicagosuburbs.com/Pages/Sessions.aspx
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • ISO:  person or forum for data modeling guidance

    hello -
    Is there anyone here who is willing/able to advise me on the data model that my husband and I have been working on? Alternatively, can anyone suggest an alternative forum, or where I need to go to have this done professionally?
    Our background is that we're both self-taught; he has a functioning database (in Approach) that we want to re-build and expand upon. I have a set of related tables in Filemaker that are semi-functional.
    We're not sure if his original model is the most stable way to have built it, nor are we sure that we're expanding in the right way to encompass my tables....
    I really do NOT want to pay someone to write this whole application for us - beyond the expense, we like/want to be in control.
    Thank you -
    Marion in Rochester

    Marion
    My e-mail address is in my profile, drop me a line and I'll be happy to have a look.
    A few things first though. Download and install Oracle XE if you have not done so already. Let me know what SQL knowledge you have specifically Oracle DDL (Data Definition Language - Using for creating and altering database objects) and DML (Data Manipulation Language - Used for inserting, updating and deleting rows from a table).
    Next send me the data model by way of what tables (and their columns), primary keys, foreign keys, constraints, indexes (if any yet) that you currently have. I will also need to know roughly how many rows you currently have in each table. Send this in any format you want (even just a text file) but not as a database.
    Cheers
    Ben

  • SDO_PC, multiple SRIDs - best practise for data model?

    Hi,
    im using UTM and I am getting data covering two zones.
    all my existing data is from zone A.
    tables:
    pointcloud
    pointcloud_blk
    now im getting data with very few points from zone A and most points from zone B. It was agreed that the data delivery will be in SRID for zone B.
    so I tested whether this would work. I had two pointclouds. One with SRID A, another with SRID B. As soon as I put SRID B pointcloud inside, I could NO LONGER QUERY pointcloud with SRID A.
    So it seems to be necessary to use at least another pointcloud_blk, f.e. pointcloud_blk_[srid].
    Question: does another pointcloud_blk for each SRID suffice or do i also need a pointcloud table per SRID. the pointcloud table seems only interesting due to its EXTENT column. But on the other hand this could be queried by "function", since there are only 10 or so records (pointclouds) inside.
    PLZ share your best practises. What does work, what not.

    It is necessary to have one pointcloud_blk table for each SRID since there is a spatial index on that table.
    As for the PointCloud table itself, it is up to you. You can have pointclouds with different SRIDs in that table.
    But if you want to create spatial index on it, you have to use some function based index so that the index
    sees one SRID for the table.
    Since this table usually does not have many rows, this should work fine with one table for different SRIDs.
    siva

  • Tools for data modeling

    Hi,
             Can any one tell me if there are any specific tools used for logical data modeling in SAP BW data modeling . I have used Erwin as a data modeling tool for implentation of data ware house, I would like to know if there are any specific tools for SAP BW implementations.
    Response appreciated
    tanu

    Another related discussion: Looking for EDW modelling tool recommendations for BW

  • Will there be Mer for the N900? any chance of Seei...

    I have been following Mer wiki for some time but i cannot see anything about the N900
    http://wiki.maemo.org/Mer
    http://wiki.maemo.org/Mer/Status
    and i was wondering, will there be anything like the Ubuntu Mobile Internet Device OS on the N900? seems like a decent OS
    http://www.ubuntu.com/products/mobile
    any opinions guys? 
    Az. At.
    IT Support Engineer
    DED

    Mer is a Maemo 5 (freemantle) port for the N800 N810.  it is allowing the older Nokia tablets to catch up to the N900.

  • Searching for Data Modell

    Hello,
    I need some further information about the data modell of SBO. An ERD would be great, but as far as I know there is no such diagram available.
    Searching in this forum gave me the information that that there are two useful files:
    - SBOObjectsTables 6.5.chm
    - DB_Help.chm
    I don´t have access to the marketplace, that´s why it would be great if someone could mail one of these files to me to [email protected]
    Thanks!

    Done

  • Just wondering, what kinda tools do you prefer for data modeling

    Reading alot about datamodeling, from E-R diagrams to UML. In your database designs. From the conceptual, logical and physical model. What tool you prefer the most and why. What is a good tool for such things. And does Oracle supply such tools. Just curious as to what the professionals use.
    Pete

    ER-WIN is your tool for Database physical / Logical data modeling.

  • How many iPhones will there be available for pre-order online Feb. 3?

    I was wanting to see if i'll have any chance at all of pre-ordering an iPhone, even if I try and get one online the minute you can order one?
    Thanks

    I don't remember the website crashing when the Druid X was launched so I don't think there will be a problem with the iPhone unless a bunch of **bleep** from AT&T are on there trying to order on the 3rd when they can't until the 10th. From my research it looks like the Druid X was more hyped up and in more of a demand than the iPhone, Most say I will wait for the iPhone 5 or that there happy with Android and not a Apple fan boy I hope this is true so there will be more iPhones for the rest of us!

  • Is there any support for data transfer compression in oracle XE?

    Hi
    Thank you for reading my post.
    I am wondering whether it is possible to ask database and JDBC driver to use some sort of compression for data transfer?
    I want to reduce the network workload as much as possible.
    Thanks

    AFAIK, Not directly from Oracle.

Maybe you are looking for