Will there be problems on my iMac on Mountain Lion if I upgrade to Maverick?
Except for two times that my iMac on Mountain Lion froze completely recently, my iMac has been working just great. I am concerned that upgrading to Maverick might cause problems. Any suggestions?
We have not way of knowing that. If you have no particular need to upgrade, then I suggest you don't bother. You can always get an external hard drive and install Mavericks on it so you can see if you really want to upgrade. Or you can clone your existing internal HDD to a backup drive. Then you can upgrade one. If you aren't happy you still have your old system.
Similar Messages
-
Will i have big problems if i go back to Mountain Lion after having upgraded to Mavericks?
Will i have big problems if i go back to Mountain Lion after having upgraded to Mavericks? I also updated iphoto, pages ,numbers etc
According to the App Store, Pages compatibility is v10.9 or later.
Same for iPhoto and Numbers.
Those apps will not run on v10.8 Mountain Lion. -
I upgraded my iMac to Mountain Lion and now my Canon Pixima MP500 will not open because PowerPC apps are no longer supported! Has anyone experience this problem?
Correct. Applications designed to run on the old PPC Macs (which Apple stopped making in 2005) cannot run on Mountain Lion.
You need to update your printer driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore it from the backup it shows the previous OS X (Leopard) beside the date of the backup that I want to select. Will it go back to Leopard if I restore it from the backup?
No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software -
Problems syncing iPod Touch (2nd generation) with iMac under Mountain Lion
When syncing my iPod Touch (2nd generation) with my iMac (under Mountain Lion) the entries in my diaries/agendas do not sync. Apps and music sync without a problem. What must I do?
I have this problem.. and after spending time at the Genius Bar yesterday, I discovered that my old ipod touch is obsolete..( the Ipod touch is a 32.bit system, while the newer operating system is 64... so they're simply not compatible.)
I expressed great dismay that my perfectly good ipod touch was now obsolete... then the genius suggested I export my contacts and calendars to Google..
That was easy to do, and then, on the Google community forum i learned about nuevasync.com, which lets you synch all of this back to your ipod touch via Exchange.
WOrked like a charm.
Nuevasync. com is free for an initial trial (10 days?) and then costs only 15$ per YEAR.. so I'll use this as a good work-around -
On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.
Yes, purchase Paragon Camp Tune for the job.
-
will microsoft office for mac 2004 transfer from my emac running 10.4.11 to the new iMac running mountain lion using migration assistant?
Microsoft Office 2004 will not work on any Mac running Lion or Mountain Lion. You will need to upgrade to Office 2011, buy the less expensive iWork apps from the App Store or use a free office clone like OpenOffice or NeoOffice.
-
if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???
Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.
-
21in. imac running Mountain Lion will not start just get grey no entry sign
21in. imac running Mountain Lion will not start just get grey no entry sign
David,
Please carefuly read what Apple says in how to troubleshoot this issue. Also PLEASE complete your profile,we don't even know what iMac you have or the version of OS X it is running.
Gray screen appears during startup -
I cloud on my Imac with Mountain Lion - signing out means losing contacts, etc.
Help. I have tried to sign out of I cloud on my Imac with Mountain Lion but it says if I do so it will either delete my contacts, documents, etc. from the computer. Something is not right here. How can I prevent this from happening? Thank you.
You have to remember that your email, calendars and contacts live on the iCloud server, not on your Mac, and your Mac reads them from there (like webmail)*. So if you sign out, you don't affect the actual data in any way because it's still on the server, but your Mac loses access to it. When you sign back in it's all still there.
However, as Julian says, there is no reason to sign out unless you are actually having a technical problem that may be solved by signing out and in again. The whole idea is to stay signed in at all times.
*Just to clarify, your Mac maintains a cached copy of the data to speed things up, and so that you can still see it when you are signed in but have no internet connection; but this cache is deleted when you sign out. For practical purposes you can ignore it. As with all caches (and your Mac has a lot) it's hidden (hence the name) and can't be regarded as an actual copy. -
After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try againHi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem
-
mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
HT1338 Is there any way to get OS X Mountain Lion on my version 10.5.8 MacBook?
I have an older MacBook, and a brand new iPhone 5c. I am having problems syncing them because I cannot download the new iTunes because my software is too old. Somebody help!
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML
Thank you for this, and to Caleb.
I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
Thanks again. Any further thoughts welcome. -
Why does my iMac with Mountain Lion fail to print.
My iMac with Mountain Lion fails to find my 2 networked printers on 50% of the occasions I try to print. Even though I have earlier switched the iMac on, the only way I can get the iMac to see the printers is to restart the iMac? After that I have no more probs. Leaving the iMac on standby overnight doesn't seem to help as the problem frequently re-occurs the next day
The Brother Laserjet printer and iMac are cabled to my router, while the HP Photoprint uses wi-fi connection. There is a PC/Windows 7 also on the network which shares the printers.
I seem to get no help from the Printer utilities in system preferences.
Any suggestions what I need to do to eliminate this apparent breakdown in communication between the printers and my iMac.Hello Mike17swr,
Thanks for the post. I'm not sure which model of Photosmart printer that you have connected, but I have included a link below with some great t-shooting steps to help identify the issue. Good Luck!
http://goo.gl/HeZm3
I work for HP but my posts and replies are my own....Thank you!
Maybe you are looking for
-
Hi, We have the GL account hierarchy based report in Report designer. When I execute the report, all the hierarchy nodes (triangle hierarchy icon) are appearing properly. After clicking on 'Print Version', report is displayed in PDF format on web-pag
-
Structure to view monthly and quaterly report urgent
Hi All, Jan-07 Feb-07 Mar 07 Q1-07 Avg Apr 07 May 07 June 07 Q2-07 Avg Jul-07 Aug-07 Sep-07 Q3-07 Avg Oct 07 Nov-07 Dec 07 Q4-07 Avg Closing 07 Dec 06
-
Hi Friends, Apologies in advance if my question belongs to other forum or group. Did SAP gives training on Crystal repors with some fee? I searched SAP and found NIIT is one of the partners, but when I enquired they said they won't give training. I w
-
Hi all, I need to put WLP users in different roles. On WebLogic Portal Admin console, I was able to add created users to on PortalSystemDelegator role. I was not able to add users to roles like Admin, Authenticated Visitor, AppTester etc. Can you pro
-
I updated the BB Bridge today and after the reboot there is no Bridge icon on my verizon tour 9630. I was working just fine before the update and now nothing. I have rebooted, deleted, reinstalled, look in all the folders, etc. Now what?