Will this configuration work for CS5.5?

Will this Dell work? Intel i7-2600? 16 GB dual channel DDRS SDRAM at 1333Mhz, nvidea geforce gt530? Want to buy Production Premium but have limited budget, don't need top of line computer performance, just workable ... All advice greatly appreciated. (I couldn't find in tech specs which video cards are supported.) Am also looking at Canon XF 100, which i think is supported by CS5.5, right?

John,
The GT 530 is very slow. It has only 96 cores, crummy DDR3 video RAM, only 128-bit memory bus. Basically a GT 430 with a new OEM-only name on it.
The Quadro 4000 is a ripoff as far as Premiere Pro CS5.5 performance is concerned: It is basically similar in performance to the GTX 460 SE (not the regular GTX 460): Only 256 cores on the Quadro 4000 versus 288 cores on the GTX 460 SE. Worse, the Quadro 4000 costs five times more money than the GTX 460 SE.

Similar Messages

I brought a iPhone (A1429) unlocked, sent it as a gift to my mate in Arizona, she is on the Verizon Network which in CDMA Will this phone work for her or have I just wasted $900 :/

I brought a iPhone (A1429) unlocked, sent it as a gift to my mate in Arizona, she is on the Verizon Network which in CDMA Will this phone work for her or have I just wasted $900 :/ I have done all the research and to me it looks like it should work.
Can anyone give me a difintive answer please.

Yes but I have brought the A1429 where as the information you provided states that it's the A1428.
The unlocked iPhone 5 is model A1428. For details on LTE support see www.apple.com/iphone/LTE. The unlocked iPhone will not work with CDMA carriers such as Verizon Wireless or Sprint. Learn more about the unlocked iPhone
And Apple websight also states that the A1429 is both CDMA and GSM here: http://support.apple.com/kb/HT3939#iPhone5

Will this battery work for my laptop?

I have a laptop from like 2009. It's going to crap and I recently got a new one, but it still runs, albeit slowly on startup and everything, and I think it's because of the battery, as it says "Consider Replacing Battery" and when I unplug the charger it just shuts off, and it only charges to 51%. So what I want to know is will this battery work for my laptop? http://www.amazon.com/gp/product/B007W1QBO4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AF7ENLFPN87DK
The battery right now says "Replace with HP Spare 593550-001 and says 2010/10. This battery says 593553-01, but it looks almost identical to my current battery. So will this get the job done?

Hi,
What is the model of your computer ? (HP 2000 is a series, not a model). Please check the compatible list:
http://partsurfer.hp.com/Search.aspx?SearchText=593553-001
By the way, slow booting up may not due to weak/faulty battery. Can it boot faster using AC ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Will this ram work for the original MBP?

Got a MBP and want to upgrade to 4g ram, will this one work?
http://www.bestbuy.ca/catalog/proddetail.asp?sku_id=0926INGFS10101436&catid=2036 1&logon=&langid=EN
thanks

Yes, that RAM module will work, but the original 2006 Core Duo model has a maximum of 2 GBs of RAM. You would need a Core 2 Duo model in order to install 4 GBs. If you have the 2006 C2D model you can install 4 GBs, but only 3 GBs will be available for use.

Will this Ram work for S10

Does anyone know if this would work for the S10?
http://bensbargains.net/deal/91668/
It's made by Super Talent, San Jose, CA. Thanks!
Message Edited by eracer on 01-28-2009 02:56 PM
Solved!
Go to Solution.

ok, that's better. while non-ECC memory supposedly works in the S10, i believe it's set up to normally accept ECC memory. also keep in mind that if combining memory, you can't use non-ECC with ECC as the S10 won't boot past POST.
part of the benefits of having a proper workstation is error checking. in my opinion ECC memory is the best way to go, even if non-ECC memory works.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Why will this not work for combo box

I need to know why this will not work a combobox but it works for text fields. Isay ther is an error in the doc.createTextNode.
Please any help would be great.
Thanks
// Repeats for each Element in the User Configuration.
item = doc.createElement("COMPANY_NAME"); // Create element
item.appendChild( doc.createTextNode(SetupCompanyNameJText.getText()) );
UserConfig.appendChild( item ); // atach element to User Config element
item = doc.createElement("INTIALS"); // Create element
item.appendChild( doc.createTextNode(SetupIntialsjComboBox.getSelectedItem()) );
UserConfig.appendChild( item ); // atach element to User Config element
item = doc.createElement("FIRST_NAME"); // Create element
item.appendChild( doc.createTextNode(SetupFirstNamejText.getText()) );
UserConfig.appendChild( item );

when I do that I end up with the following
Error: #:300: class Configuration not found in class
any ideas
thanks

Will this setup work for Color Calibration / Matrox / Enzio Monitor

Hi, I'm getting conflicting answers from Matrox forum and DVinfo.
I'm wondering if this setup will work for editing wedding films as well as doing color correction...
I'm using FCP 7 / FCS 3. I have a DVI input as well as a DisplayPort input on my Mac Tower which is about year old.
Monitor: http://www.bhphotovideo.com/c/product/687611-REG/Eizo_CG223W_BK_ColorEdge_CG223W _22_Widescreen.html
Converter/Capture Card: (This is where I'm confused.) I'd also like to keep it under $800 if possible and be compatible with FCP X
http://www.sharbor.com/products/MTXN5010167.html
Can I also use a displayport to HDMI to connect my Mac tower to the Matrox as well as a HDMI to DisplayPort to connect the Matrox to the monitor or will this ruin or downgrade the signal?
Or is there another card that I could use that is simple to install?
Thanks for you help!

>Can I also use a displayport to HDMI to connect my Mac tower to the Matrox as well as a HDMI to DisplayPort to connect the Matrox to the monitor or will this ruin or downgrade the signal?
No. The Matrox MXO2 line connects one of three ways: PCIe slot in MacPro, Express34 for MacBook Pro, and Thunderbolt (additional cost for the adapter). If you have a MacPro..you put the MXO2 adapter card into one of the PCIe slots, then connect that to the MXO2 box.

Will this configuration work

Hi all
I´m about upgrading my machine with new graphics so I was thinking of buying MSI Ge-Force GTX 275 896MB PhysX CUDA
Will this work om my mainboard? 975X Platinum PowerUp Edition
I´m wondering since the graphics is PciE 2.0

GTX275 -> 219W (18.25A @12V), let me round that up to 19A
E6700 -> TDP = 65W (5.4A @12V), let me round that up to 6A
Board -> 0.5-1A @12V
all fans -> well, just count in 2A for all of them (probably a lot less in reality, but it is always better to round up a little)
HDDa -> 1.5A-2A each (probably somewhat less, depending on the drive)
Now do the math:
19A+6A+1A+2A+4x2A=36A, your PSU can deliver up to 35A on the +12V rail, so this is going to be somewhat tight, especially when you want more headroom.
As the system will probably draw less than 36A on +12V under real working conditions (as this is only an estimation), the PSU will probably even work. But let's suppose you are pushing it to the limit a lot (all hard drives doing something etc.), even @30-33A you still don't really have much headroom here. The PSU will probably have to run hotter which further minimized its output capabilities and its life time. The problem is, that if these PSUs suddenly die, they sometimes take other components with them.
You can give that PSU a shot and it will probably even work. However, on the long run, there is a chance that you will run into stability problems or other issues. The split rail design is not of much help here either (35A split into two +12V rails with a 20A current limit each). You always have to make sure that all loads are evenly balanced onto both rails. If the load on one rails exceeds 20A, the PSU will shut down, even if the combined power consumption on the +12V circuit is less than 35A.
In my oppinion, you should start looking for a somewhat stronger Single-12V-Rail PSU. The Corsair VX550W for example, can deliver up to 41A on the +12V rail. The already looks better. The next level would be something like the TX650 (51@12V).
Other recommendations can be found here:
https://forum-en.msi.com/index.php?topic=130065.0

Will this setup work for extending my network?

I want to be able to control which piece of hardware I connect to. I have and airport extreme currently being extended by a airport express so we can get a signal in the far part of our backyard. The problem is when going through the airport express the bandwidth drops by 50%, and since I can't specify what to connect to I need another solution, so will the following work?
1) airport extreme connects to Internet
2) airport express connect wirelessly to airport extreme but doesn't allow wireless clients.
3) airport express connects via Ethernet to another router which I setup as a different wireless network (different ip range etc)
4) then in backyard we can use the second wireless network
5) when inside we can connect directly to the airport express
is this possible?
Thanks

Experiment a bit with the placement of the AirPort Express.
It's natural that the signal strength (and speed) will fall off with distance from the wireless router, so the trick is to place the AirPort Express at a position where it will:
1) Receive as strong a signal as possible (because it can only extend what it receives).
2) Extend the signal strength to the area you want to cover
If there were no obstructions between the main router and the area you want to extend to, the ideal position for the Express would be half way between them. That way, the Express gets as strong a signal as possible to extend the signal.
Depending on your layout, the Express may need to be even closer to the main router....or, more than half the distance, maybe up to 2/3.
If you power down the Express and take some measurements with the laptop, you will see how the wireless signal strength and speed fall off with distance. If you locate the Express too far away from the main router, it won't have enough signal to work with for best performance.
It's all a series of compromises. You never gain something without giving up something else in return. It's possible that the 50% loss in bandwidth in the remote areas is the best that can be attained at your location. Extending using wireless only always brings some loss of performance.
Finally, if you really want the "best" bandwidth performance from a wireless network, the only way to do it is connect the Express to the AirPort Extreme using ethernet. This preserves the bandwidth on the network much more effectively than any other method of extending.

Will this enclosure work for the hard drive on my G4 laptop.

I am looking for an enclosure that will all me to connect my G4 Laptop Hard drive...will this work?
http://www.sourcingmap.com/brown-usb-sata-hdd-aluminum-external-hard-drive-enclo sure-case-p-18880.html

Pre-September 2003 Powerbook G4s without a PCMCIA slot will be limited to USB 1.1 speeds with this enclosure.
PCMCIA and Post September 2003 Powerbooks can use the hard drive with reasonable speed as USB 2 if there are no other USB 1.1 devices connected to the USB port. PCMCIA powered USB adapters exist that can be used for those Powerbooks with PCMCIA.
Neither series Powerbook will be able to boot Mac OS X from that enclosure. A Firewire enclosure would be needed to boot the the drive as an external drive, and know you have a reliable clone, if your purpose is to make a clone backup.
Note, you posted this question in the iBook G4 forum, yet your profile indicates you have a Powerbook G4. We can ask a moderator move your thread if your question is regarding Powerbooks. No iBook has PCMCIA slots. Look beneath your screen on the screen's frame, but above the keyboard to determine which machine you have. Powerbooks can be identified here:
http://docs.info.apple.com/article.html?artnum=88248
iBooks here:
http://docs.info.apple.com/article.html?artnum=88039

Will this configuration work: multiple soa nodes, but unclustered ??

We are currently on 11.1.1.4 version and 2 nodes cluster. We are running into cluster related racing issues within the BPEL product and the patches Oracle gave us do not work. One idea we are thinking is to take out the cluster but leave the two soa nodes there as two stand-alone weblogic managed servers.
What is your thoughts on this? Will this work?

Hi
1. Having 2 Nodes (soa_servers) without any CLUSTER is of no use and infact this may corrupt your entire ENV itself. So don't try this approach. It may work, but if you made any changes to any node, they are not replicated across and there will be a big chaos within server files.
2. To begin with, what issues/problems are you facing having 2 nodes in a soa cluster. Most of us in Prod and even in testing env will have soa_cluster with atleast 2 soa_servers spread across totally 2 different machines. It all works fine from Load Balancing, Fail over, Replication point of view.
3. Ideally, a soa cluster will have like 2 nodes (2 managed servers - soa_server1, soa_server2 spread across 2 diff remote machines). They are fronted by a Load Balancer. Means in front of them there will be a hardware or software Load Balancer. All user requests go to this Load Balancer which inturn connects the request to one of the 2 backend soa servers. If any of servers is down, user is not even aware of this. This is the ideal behavior. Load Balancer can be software balancer like apache http webserver or hardware load balancer like F5. Session, Data replication is all taken care of.
4. If you do NOT put, 2 soa nodes in cluster, what URL will you expose to end user? They had to directly access your managed server url. This is not something we want in a cluster Env.
I would recommend to address and fix Cluster issues. If you are not able to, then expose only one Single node and let users access that node only
Putting 2 nodes outside of cluster, you had to expose 2 urls to end users. This may work, but not recommended.
Thanks
Ravi Jegga

I am looking to purchase an Apple G4/500 to submit graphics etc. across the internet for an independent newspaper. Will this tower work for this purpose ?

I am looking to purchase an Apple G4/500 to submit graphics etc. across the internet for an independent newspaper. Will this tower suit my needs to start ?

Thank you for helping me consider all of this. I am a novice at this newspaper project so I am unsure of what all I need to consider. I will find out and go from there. I do not have a lot of revenue to start with so when I found a deal, I thought it may be a consideration to start with.

I have a 2009 Macbook Pro and the charger stopped working. Will this charger work for it, or do i have to find an old 1 online?

I've looked into the replacement program and i don't qualify.
http://store.apple.com/nz/product/MC461X/A/apple-60w-magsafe-power-adaptor-for-m acbook-and-13-inch-macbook-pro
Wil this work for an older macbook pro?

Welcome to the Apple Support Communities
That charger is perfect for your MacBook Pro, so you can buy it and use it with your computer. If you want, you can buy the 85W one, that provides more power and makes the battery charge faster, at least for the 15 and 17-inch MacBook Pro

Will this Desktop Work For Battlefield 4

This is the Desktop im looking at >>>>> http://www.bestbuy.com/site/HP+-+Refurbished+-+Refurbished+ENVY+Desktop+-+10GB+Memory+-+1TB+Hard+Dri...
Will this Desktop be able to play Battlefield 4 atleast on high settings. Because for the system specs for BF4 it says i need the Radeon 7000 series graphics card, and it looks like this desktop has it. '
So would all i need to buy is a 500 Watt power supply? Or would i need to buy a 660Ti graphics card with it?
Please help. Thanks
Solved!
Go to Solution.

Hello Thunderbolt1096,
I'd say the processor will be fine, but you'll definitely want to get the 660 ti you mentioned. The site just mentions the 7000 series as a minimum requirement. Even on a low to medium resolution at medium settings the 7450 will only produce around 25 FPS with plenty of dropping during high action moments.
Tory|Community Specialist | Best Buy® Corporate

Will this configuration work? 10.5.3, OD, SMB

I've been playing with this for 5 days, and have come up with nothing but frustration, I will be greatly appreciative of everyone that can help me pin down a solid way to make this work.
Environment:
New xserv 3x1TB drives-RAID5. DNS and DHCP is handled by another box, working properly. 30 Windows XP Pro sp2/sp3 machines. 10 MacBooks running 10.4.11/10.5.3
1. Install OS X 10.5.0 fresh
Two HDD volumes. xserv HDD(30gb), and Data(1.8TB)
Admin Account During Setup: tech
Hostname: server.sub.example.com
Advanced Mode.
2. Install 10.5.3 Combo Update.
Install any other Software updates.
3. Check service box to Enable OpenDirectory and SMB in ServerAdmin (I'll worry about AFP later, let's just get the XP clients working)
4. Change OD from standalone to OD Master in ServerAdmin
Leave all the default values.
Directory Administrator - diradmin
5. Promote SMB from standalone to PDC in ServerAdmin
Use the diradmin account when prompted.
Set domain name to sub.example.com
Leave all the default values.
6. Using Workgroup Manager, create groups in the LDAP/127.0.0.1 domain.
Also, assign groups as member of groups, as indicated by tabs.
Domain Users---- -default group-
--Administration
----Vice President
----Director of Operations
----Director of Admissions
----Director of Finance
----Registrar
----Director of Press
----Public Relations
----Director of Off-campus Studies
----Seminar Registrations
----Receptionist
----Office Assistant
----Assistant to Admissions
----Assistant to Finance
----Assistant to Registrar
----Director of Events
----T.R.E.
----C.E.O.
--Faculty
----President
----Provost
----Assistant Provost
----Mentor
--Development
----Development Officer
----Director of Development
7. Create Users in Workgroup manager.
Primary group is 20, OD Users.
Add to respective groups.
8. Setup Home directories on the Data volume.
Delete default shares, public, groups, users.
9. Copy files to Data volume
4 Directories, with complex subtrees, that need to become sharepoints.
These are copied from a linux file server via smb.
10. Disable roaming profiles
Add "logon path =" to the end of /etc/smb.conf
11. Join each XP Pro client to the sub.example.com domain
Authenticate with the diradmin user/pass.
This creates a computer account ending with $ in OD.
12. Login to XP clients with OD U/P.
I want the following at this point:
Only members of the Domain Users group to be able to login to a workstation.
Home directories mounted as H: for each user.
Ok, this is what I have so far, and a list of questions:
-How do I properly create a sharepoint for Home Directories on the Data Volume? ( these should of course be secure to each user.
-(How can I change the default template/skel? as I'm not using these for mac users at this point and don't need that structure...))
-How do I set that up in workgroup manager?
-I want to start out with the 4 sharepoints I'm copying over being R/W/Full Control by all users in the Domain Users Group, I'll restrict access later. What POSIX permissions, umask's, or ACL's do I need to set how for it to work properly with SMB continually?
-How do I allow my XP clients to be able to see the groups that I setup in WGM? (ie, to add to local groups on the machine, or permissions to print etc.)
-If I add a user to the Domain Admin group in WGM, will he have local administrator rights on the XP workstation? How do I get that to work?

-How do I properly create a sharepoint for Home Directories on the Data Volume? ( these should of course be secure to each user.
Just on that one point heres what I did, I have almost the same setup as you and wanted to get homes off the system drive. It works perfectly.:-
1) configure network automounts
Log in to Server Admin using local admin account.
Click 'File Sharing', then 'Share Points'
Select the destination folder (something like /Volumes/Data/Users )
Click enable automount
confirm AFP as the protocol
Select 'User home folders'
Click OK
Click Save
Authenticate as diradmin if asked during these steps
2) Configure users to use network homes
Run WGM
Click accounts and make sure you are using OD
Click Users and select all the required users
Click the home tab and select the users share point you just created
Click save.
Angus

Will this configuration work for CS5.5?

Similar Messages

Maybe you are looking for