Will this cooler fit?

Hi folks im loving my MSI p7n platinum great board, have had no probs with it at all. decided to fit a new cooler as my E8500 seems to be running a bit hot, so was going to fit a  Arctic Cooling Freezer 7 then i read about the  Zalman 9700 led, but being bigger than the arctic will it fit my board? also is it a lot better than the Artic as it is over twice the price ? thx for any help

Thx for the reply m8  ill try the Arctic, cheaper and easier to fit dont have to take board out again , what do u use to tell u what temp your cpu is at? on Msi dual core centre mine says 34degs  speed fan says 45deg, a big  gap, what is the best program?  thx again for the reply 

Similar Messages

  • Will this RAM fit ?

    Will this RAM be supported in a 2010 MBP ?
    Only difference I can see is that standard RAM is 1066mhz and this is 1333mhz.
    http://www.ocztechnology.com/products/laptop-memory/ddr3-sodimm/ddr3-sodimm/ocz- ddr3-pc3-10600-ddr3-value-sodimm-8gb-edition.html
    And does anyone know of any other memory providers that make RAM to fit a MBP ?

    204 pin looks like it would fit, however I think what you are looking for is PC8500 DDR3 1066MHz 204 Pin?
    You can read more on bus speed and overclocking. Depends on what you are primary using your computer for. You can decide for yourself, google "1066mhz and this is 1333mhz."
    http://eshop.macsales.com/shop/memory/AppleMacBook_MacBookPro/Upgrade/DDR3
    Message was edited by: leroydouglas

  • Will this card fit in my G5?!?

    My original video card died - I am looking to buy a Radeon 9000 Pro Mac Edition ADC/DVI card w/128MB. Will this fit/work in my original dual 2.0 G5 AGP?
    HELP!
    //dennis

    Hi-
    The 9000 is 2x/4x AGP compatible as far as I know. I don't recall it being 8x AGP compatible.
    Your G5 is 8x AGP.

  • Will This HSF Fit?

    Will The Thermalright SLK-800a Fit On The K7N2-L?(I Don't Wanna Buy It If It Won't.
    Thanks,
    Bryan

    yep seen it in a lot of signatures and its smaller than my ax 7

  • I have AG3-605-UR1G will this card fit in it?

    GTX 750Ti SC 2GB If not what decent card will work?I have 500w PSU

    What it means is that the CPU runs at 3.3GHz, when you put the system under load (gaming, loading applications etc..) it can boost up to 3.7GHz. This creates more heat and the CPU is designed to balance the extra speed and performance with safety of making sure there isn't to much heat and ensuring the longevity of the CPU.
    Someone a little more knowledgeable about CPUs might be able to tell you if it's possible to push the CPU to stay at 3.7, but it probably isn't just as easy as turning on a setting in your PC.
    Cory

  • Does this cooler fit on my KT6 Delta FISR?

    Hi guys...
    I'm goin to buy a Barton mobile so I have of course to change my cpu cooler and here it comes the dilemma...do the latest ones zalman 7000, thermalright sp 97, 948 or still the volcano fits to the socket place?
    Somebody can tell me if they have these configurations?
    Cuse I haven't seen MS compatibilitì on coolers' sites but it can be that they haven't tested at all...
    thx everybody  

    I'm not sure about the Zalman but at the moment I'm running a Slim Volcano 10+ AMD Approved
    Works great CPU temp @ 38c(idle) & 46c load with Barton 2500+

  • Will this Ninja fit P7N Platinum?

    Can someone tell me if this Ninja linked to below would fit socket on the P7N SLI Platinum? Also, any problem with the System 1 fan header and/or ATX 8-pin power connector being blocked by it making them inaccessible after heatsink is installed? I listed two links because not sure if they are the same model since Scythe calls it a revision "B."
    http://www.scythe-usa.com/product/cpu/026/scnj1100p.html
    http://www.newegg.com/Product/Product.aspx?Item=N82E16835185038

    works on mine.  you need offset the fan a bit to keep it from hitting the DIMM in the first slot.  can't use DIMM with large heatsinks like ocz reapers.

  • Will this RAM work in MBP 15inch

    Will this ram fit our 15 MBP bc this is another great deal
    http://www.frys.com/product/5468099

    I tried using the memory finder on the Frys' site and the link to the Apple page errors out. Do you really want RAM from someone who can't keep an Apple RAM link working? I buy a lot of stuff from Fry's retail store but not RAM. Even in-store, they seldom have proper Mac memory charts.
    Like SIG says, post more details about your machine to get better advice on finding the right RAM. The easiest way is to do "About this Mac..." and then click "More Info..." in the resulting window. You'll get the System Profiler screen; copy the info on the first screen and paste everything except your machine's serial number into a response. For example, doing that with my MBP gives this info:
    Hardware Overview:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP31.0070.B05
    SMC Version: 1.16f10
    Serial Number: xxxxxxxxxxxxxx
    Someone can look at this and tell exactly which model you have and what RAM it takes.

  • I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol

  • Will this hard drive fit in my Macbook pro?

    Looking to upgrade the hard drive in my 2010 Macbook Pro. Stats are below.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MBP61.0057.B0C
      SMC Version (system):          1.58f17
      Serial Number (system):          W80163PPAGZ
      Hardware UUID:          803FF0AE-DDCA-5411-92ED-610F8E37D0EC
    Current HD
         APPLE SSD TS128B:
         Capacity:          121.33 GB (121,332,826,112 bytes)
         Model:          APPLE SSD TS128B
    Will this 840 evo 1TB fit in the unibody housing? If not could you direct me to other SSD Options that will. Thank you.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820147251

    No.
    Ciao.

  • Will this Solid State Hard Drive Fit in a Desktop Computer?

    Will this Solid State Hard Drive Fit in a Desktop Computer?
    http://www.newegg.com/Product/Product.a … 6820208315
    Any info is greatly appreciated; thanks!

    I think you'll need two adapters as well. One to mount a 2.5" drive in a 3.5" bay, and one to convert the smaller 2.5" IDE connector to the bigger type found in desktop PCs and a separate power plug.
    Here's two examples. I'm not recommending either of these products, they're just the first ones I found!
    http://www.newegg.com/Product/Product.a … 6812116211
    http://www.newegg.com/Product/Product.a … 6817984006

  • Will this hard drive fit my MacBook?

    Hi!
    I've decided to upgradre my MacBook's hard drive when I install Leopard. I have a couple of questions. Hope some nice person will help me with some answers
    First. Will this fit my MacBook:
    Hitachi TravelStar 5K160 - Harddisk - 160 GB - internal hard driwe - 2.5" - SATA-150 - 5400 rpm - buffer: 8 MB
    Second. Will my old hard drive fit in some sort of box so I can use it as an external hard drive?
    Thanks alot!

    Yes. If you want a little more speed and capacity consider the Hitachi 7K200 model - 200 GBs, 7200 RPM.
    You can find enclosures for your old drive here:
    CoolDrives.com
    MacSales.com
    WiebeTech.com
    CalDrives.com
    FireWireDirect.com

  • CPU cooler fitting .

    I am very confused between these 2 CPU Coolers .
    http://www.zalman.co.kr/ENG/product/Product_Read.asp?Idx=277
    http://www.zalman.co.kr/ENG/product/Product_Read.asp?Idx=333
    I currently am owning P7N Diamnond and  just wondering will CNPS9900 LED will actually fit it or not . Cause the width of this cooler is more  . Generally looking for people who are owning the same board and used this cooler . THX .

    Quote from: Jack t.N. on 22-June-09, 19:42:28
    Hi,
    in this thread:
    https://forum-en.msi.com/index.php?topic=125057.msg942471#msg942471
    ... a CNPS9900 is used on a P7N2 Diamond.  I know that you are asking about a P7N Diamond, but if you compare the Layouts of the two boards, you will find that they are very similar. 
    Thx . Dude u have the same processor as i have . Can u tell me the setting u have done in order to achieve max OC . Can u give me all the configs that has to be done in the cell menu .

  • Thinkpad A20P Tuning - Does a T23 cooling fit in an A20P ?

    Hi,
    i would like to tune my A20P up to max. possible sl5sh 1,0 ghz coppermine  processor.
    Now ive read about possible temperature problems caused by the higher voltage the 900 mhz and 1,00 ghz coppermines are using (which george mentioned too in another thread).
    Ive read also that people owning a thinkpad T20 could solve this by using the cooling of a T23 model.
    Can i do this aswell ? ..i mean does a T23 cooling fit in an A20P ?
    Greetings.

    No, cooling fan from T23 will not fit an A2x series machine.
    Good luck. 
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I have an icloud email account that my spouse used and he is gone now, can I delete this one and use another or will this delete information?

    I have an icloud email account that was set up by my spouse and I am trying to get rid of everything with him on it due to the nature of the split and want to make sure he can never access the childrens and my photots, music, etc. 
    In this I wanted to change the email address in icloud so that I no longer get his emails from his contacts, friends, etc.  I made an alias but is there anyway to delete this icloud email address and use another or will this delete all of our data?
    New at this icloud and its real cool but afraid to lose all my information. 
    Help!

    Welcome to the Apple Community.
    Deleting the account from the phone will do only that! it won't affect any other information on any other device.

Maybe you are looking for

  • Error in Configure JMSAdmin utililty

    Hi, I have installed IBM MQ Series 5.3 on windows XP. I am attempting to use JMSAdmin to configure my qcf and queues that my applications will talk to. When I run JMSAdmin and try to create my qcf I get unable to bind object. InitCtx> define QCF(samp

  • How about some color, clyde style ?

    Notice the difference ? I know Arch is all about KISS, but some color would really "KIETR" (keep it easy to read). The boot process has it. So why not pacman ?

  • I made a new apple ID

    I couldnt access my email to the other apple ID I had, so I made a new one. I deleted my iCloud with the old email I had and now I'm trying to log in with my new apple ID and everytime I try it says "Cannot sign in. The operation couldnt be completed

  • OTNRogueModeratorsFAQ

    This is restatement of this Forum's unofficial FAQ ( Re: How to attach a java bean in forms6i ). Feel free to visit, use and enhance. http://cleveridea.tzo.com/pls/pigiwiki/pkg$pigiwiki.get_page?p_pattern=OTNRogueModeratorsFAQ Michael O'Neill Publish

  • HT3559 iMac power consumption

    Where can i find the power consumption level of my Imac (21.5 inch late 2009) when it is in sleep mode. It doesn't seem to include sleep mode here: http://support.apple.com/kb/HT3559 I have seen it in the past in the enviromental report but that does