Will this Desktop Work for newer games?

I was thinkking of buying this but i wasnt sure if it would be able to run the Newer games like Bf3. And in October Bf4. Here's the website link.
http://www.bestbuy.com/site/HP+-+Refurbished+-+Refurbished+ENVY+Desktop+-+10GB+Memory+-+1TB+Hard+Dri...
Do you think this pc would be able to run those games?
Please Help.
Thanks in Advance.
Solved!
Go to Solution.

Alright, here's my suggested solution
Graphics card :
http://www.bestbuy.com/site/PNY+-+GeForce+GTX+650+1GB+GDDR5+PCI+Express+3.0+Graphics+Card/6820308.p?...
Upgraded power supply : http://www.bestbuy.com/site/Cooler+Master+-+eXtreme+Power+Plus+500W/1510585.p?id=1218265778423&skuId...
I know this is a bit above the $150 mark, but really anything less than that wouldn't be worth it.
To compare, the 7450 scored 319 points on the Passmark test, where as the 650 scored 1831.
It most likely won't be able to play it maxed out on settings, but should handle the games decently on medium.
Thoughts/criticisms from others welcome, if they can find something better.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Similar Messages

  • Will this Desktop Work For Battlefield 4

    This is the Desktop im looking at >>>>> http://www.bestbuy.com/site/HP+-+Refurbished+-+Refurbished+ENVY+Desktop+-+10GB+Memory+-+1TB+Hard+Dri...
    Will this Desktop be able to play Battlefield 4 atleast on high settings. Because for the system specs for BF4 it says i need the Radeon 7000 series graphics card, and it looks like this desktop has it. '
    So would all i need to buy is a 500 Watt power supply? Or would i need to buy a 660Ti graphics card with it?
    Please help. Thanks
    Solved!
    Go to Solution.

    Hello Thunderbolt1096,
    I'd say the processor will be fine, but you'll definitely want to get the 660 ti you mentioned. The site just mentions the 7000 series as a minimum requirement. Even on a  low to medium resolution at medium settings the 7450 will only produce around 25 FPS with plenty of dropping during high action moments.
    Tory|Community Specialist | Best Buy® Corporate

  • Will this battery work for my laptop?

    I have a laptop from like 2009. It's going to crap and I recently got a new one, but it still runs, albeit slowly on startup and everything, and I think it's because of the battery, as it says "Consider Replacing Battery" and when I unplug the charger it just shuts off, and it only charges to 51%. So what I want to know is will this battery work for my laptop? http://www.amazon.com/gp/product/B007W1QBO4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AF7ENLFPN87DK
    The battery right now says "Replace with HP Spare 593550-001 and says 2010/10. This battery says 593553-01, but it looks almost identical to my current battery. So will this get the job done?

    Hi,
    What is the model of your computer ? (HP 2000 is a series, not a model). Please check the compatible list:
       http://partsurfer.hp.com/Search.aspx?SearchText=593553-001
    By the way, slow booting up may not due to weak/faulty battery. Can it boot faster using AC ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I brought a iPhone (A1429) unlocked, sent it as a gift to my mate in Arizona, she is on the Verizon Network which in CDMA Will this phone work for her or have I just wasted $900 :/

    I brought a iPhone (A1429) unlocked, sent it as a gift to my mate in Arizona, she is on the Verizon Network which in CDMA Will this phone work for her or have I just wasted $900 :/ I have done all the research and to me it looks like it should work.
    Can anyone give me a difintive answer please.

    Yes but I have brought the A1429 where as the information you provided states that it's the A1428.
    The unlocked iPhone 5 is model A1428. For details on LTE support see www.apple.com/iphone/LTE. The unlocked iPhone will not work with CDMA carriers such as Verizon Wireless or Sprint. Learn more about the unlocked iPhone
    And Apple websight also states that the A1429 is both CDMA and GSM here: http://support.apple.com/kb/HT3939#iPhone5

  • Will this ram work for the original MBP?

    Got a MBP and want to upgrade to 4g ram, will this one work?
    http://www.bestbuy.ca/catalog/proddetail.asp?sku_id=0926INGFS10101436&catid=2036 1&logon=&langid=EN
    thanks

    Yes, that RAM module will work, but the original 2006 Core Duo model has a maximum of 2 GBs of RAM. You would need a Core 2 Duo model in order to install 4 GBs. If you have the 2006 C2D model you can install 4 GBs, but only 3 GBs will be available for use.

  • Will this configuration work for CS5.5?

    Will this Dell work? Intel i7-2600? 16 GB dual channel DDRS SDRAM at 1333Mhz, nvidea geforce gt530? Want to buy Production Premium but have limited budget, don't need top of line computer performance, just workable ... All advice greatly appreciated. (I couldn't find in tech specs which video cards are supported.) Am also looking at Canon XF 100, which i think is supported by CS5.5, right?

    John,
    The GT 530 is very slow. It has only 96 cores, crummy DDR3 video RAM, only 128-bit memory bus. Basically a GT 430 with a new OEM-only name on it.
    The Quadro 4000 is a ripoff as far as Premiere Pro CS5.5 performance is concerned: It is basically similar in performance to the GTX 460 SE (not the regular GTX 460): Only 256 cores on the Quadro 4000 versus 288 cores on the GTX 460 SE. Worse, the Quadro 4000 costs five times more money than the GTX 460 SE.

  • Will this Ram work for S10

    Does anyone know if this would work for the S10?
    http://bensbargains.net/deal/91668/ 
    It's made by Super Talent, San Jose, CA.  Thanks!
    Message Edited by eracer on 01-28-2009 02:56 PM
    Solved!
    Go to Solution.

    ok, that's better.   while non-ECC memory supposedly works in the S10, i believe it's set up to normally accept ECC memory.   also keep in mind that if combining memory, you can't use non-ECC with ECC as the S10 won't boot past POST.
    part of the benefits of having a proper workstation is error checking.   in my opinion ECC memory is the best way to go, even if non-ECC memory works.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Will this setup work for Color Calibration / Matrox / Enzio Monitor

    Hi, I'm getting conflicting answers from Matrox forum and DVinfo.
    I'm wondering if this setup will work for editing wedding films as well as doing color correction...
    I'm using FCP 7 / FCS 3. I have a DVI input as well as a DisplayPort input on my Mac Tower which is about year old.
    Monitor: http://www.bhphotovideo.com/c/product/687611-REG/Eizo_CG223W_BK_ColorEdge_CG223W _22_Widescreen.html
    Converter/Capture Card: (This is where I'm confused.) I'd also like to keep it under $800 if possible and be compatible with FCP X
    http://www.sharbor.com/products/MTXN5010167.html
    Can I also use a displayport to HDMI to connect my Mac tower to the Matrox as well as a HDMI to DisplayPort to connect the Matrox to the monitor or will this ruin or downgrade the signal?
    Or is there another card that I could use that is simple to install?
    Thanks for you help!

    >Can I also use a displayport to HDMI to connect my Mac tower to the Matrox as well as a HDMI to DisplayPort to connect the Matrox to the monitor or will this ruin or downgrade the signal?
    No.  The Matrox MXO2 line connects one of three ways: PCIe slot in MacPro, Express34 for MacBook Pro, and Thunderbolt (additional cost for the adapter).  If you have a MacPro..you put the MXO2 adapter card into one of the PCIe slots, then connect that to the MXO2 box.

  • Why will this not work for combo box

    I need to know why this will not work a combobox but it works for text fields. Isay ther is an error in the doc.createTextNode.
    Please any help would be great.
    Thanks
    // Repeats for each Element in the User Configuration.
    item = doc.createElement("COMPANY_NAME"); // Create element
    item.appendChild( doc.createTextNode(SetupCompanyNameJText.getText()) );
    UserConfig.appendChild( item ); // atach element to User Config element
    item = doc.createElement("INTIALS"); // Create element
    item.appendChild( doc.createTextNode(SetupIntialsjComboBox.getSelectedItem()) );
    UserConfig.appendChild( item ); // atach element to User Config element
    item = doc.createElement("FIRST_NAME"); // Create element
    item.appendChild( doc.createTextNode(SetupFirstNamejText.getText()) );
    UserConfig.appendChild( item );

    when I do that I end up with the following
    Error: #:300: class Configuration not found in class
    any ideas
    thanks

  • Will this setup work for extending my network?

    I want to be able to control which piece of hardware I connect to. I have and airport extreme currently being extended by a airport express so we can get a signal in the far part of our backyard. The problem is when going through the airport express the bandwidth drops by 50%, and since I can't specify what to connect to I need another solution, so will the following work?
    1) airport extreme connects to Internet
    2) airport express connect wirelessly to airport extreme but doesn't allow wireless clients.
    3) airport express connects via Ethernet to another router which I setup as a different wireless network (different ip range etc)
    4) then in backyard we can use the second wireless network
    5) when inside we can connect directly to the airport express
    is this possible?
    Thanks

    Experiment a bit with the placement of the AirPort Express.
    It's natural that the signal strength (and speed) will fall off with distance from the wireless router, so the trick is to place the AirPort Express at a position where it will:
    1) Receive as strong a signal as possible (because it can only extend what it receives).
    2) Extend the signal strength to the area you want to cover
    If there were no obstructions between the main router and the area you want to extend to, the ideal position for the Express would be half way between them. That way, the Express gets as strong a signal as possible to extend the signal.
    Depending on your layout, the Express may need to be even closer to the main router....or, more than half the distance, maybe up to 2/3.
    If you power down the Express and take some measurements with the laptop, you will see how the wireless signal strength and speed fall off with distance. If you locate the Express too far away from the main router, it won't have enough signal to work with for best performance.
    It's all a series of compromises. You never gain something without giving up something else in return. It's possible that the 50% loss in bandwidth in the remote areas is the best that can be attained at your location. Extending using wireless only always brings some loss of performance.
    Finally, if you really want the "best" bandwidth performance from a wireless network, the only way to do it is connect the Express to the AirPort Extreme using ethernet. This preserves the bandwidth on the network much more effectively than any other method of extending.

  • Will this enclosure work for the hard drive on my G4 laptop.

    I am looking for an enclosure that will all me to connect my G4 Laptop Hard drive...will this work?
    http://www.sourcingmap.com/brown-usb-sata-hdd-aluminum-external-hard-drive-enclo sure-case-p-18880.html

    Pre-September 2003 Powerbook G4s without a PCMCIA slot will be limited to USB 1.1 speeds with this enclosure.
    PCMCIA and Post September 2003 Powerbooks can use the hard drive with reasonable speed as USB 2 if there are no other USB 1.1 devices connected to the USB port. PCMCIA powered USB adapters exist that can be used for those Powerbooks with PCMCIA.
    Neither series Powerbook will be able to boot Mac OS X from that enclosure. A Firewire enclosure would be needed to boot the the drive as an external drive, and know you have a reliable clone, if your purpose is to make a clone backup.
    Note, you posted this question in the iBook G4 forum, yet your profile indicates you have a Powerbook G4. We can ask a moderator move your thread if your question is regarding Powerbooks. No iBook has PCMCIA slots. Look beneath your screen on the screen's frame, but above the keyboard to determine which machine you have. Powerbooks can be identified here:
    http://docs.info.apple.com/article.html?artnum=88248
    iBooks here:
    http://docs.info.apple.com/article.html?artnum=88039

  • I am looking to purchase an Apple G4/500 to submit graphics etc. across the internet for an independent newspaper. Will this tower work for this purpose ?

    I am looking to purchase an Apple G4/500 to submit graphics etc. across the internet for an independent newspaper. Will this tower suit my needs to start ?

    Thank you for helping me consider all of this. I am a novice at this newspaper project so I am unsure of what all I need to consider. I will find out and go from there. I do not have a lot of revenue to start with so when I found a deal, I thought it may be a consideration to start with.

  • I have a 2009 Macbook Pro and the charger stopped working. Will this charger work for it, or do i have to find an old 1 online?

    I've looked into the replacement program and i don't qualify.
    http://store.apple.com/nz/product/MC461X/A/apple-60w-magsafe-power-adaptor-for-m acbook-and-13-inch-macbook-pro
    Wil this work for an older macbook pro?

    Welcome to the Apple Support Communities
    That charger is perfect for your MacBook Pro, so you can buy it and use it with your computer. If you want, you can buy the 85W one, that provides more power and makes the battery charge faster, at least for the 15 and 17-inch MacBook Pro

  • I have a Macbook Air with 384 mb of VRAM, will this application work for me?

    I'm starting a Residential Planning course TODAY and just now see that it requires 512MB of VRAM to run Photoshop. My Macbook Air only has 384. Will it work? Or do I need to drop out of this class or buy a new computer??

    I believe some features will be available even if the video card has less than the minimum 512 MB.  Are you planning to use the 3D modeling features?  If so, those definitely DO need at least 512 MB of VRAM.
    If you're not sure what features you'll be using, nothing is stopping you from downloading it and trying it yourself (Photoshop can be tried for 30 days free).  That's what I suggest you do, to be sure.
    -Noel

  • Will this technique work for DataSource merging?

    I am going to receive 10 incoming datasources and I want to send them out as one datasource. Since different user send at different time I was thinking of doing this:
    get new DS-> stop SendStream to all-> merge DS-> resume SendStream.
    Does anyone think this will work or not? Is there a better way to do it? thanks!

    I�m not sure, but don�t think it�ll work.
    For sending a mixture of all the incoming streams you have to access the raw bytes of those incoming streams, then mix, and then send the mixture as a single stream. Of course, you have to code it yourself.
    bgl

Maybe you are looking for