Will this Power Supply work?

I'm getting my K8N soon, and I've spotted a new power supply that I want.  It's an Aspire 500W.  I won't BS with you guys - I like the LED's and the adjustable fan knob.  It has the specs (max, not peak, of course) below -
3.3 - 28a
5 -    30a
12-   34a
Will this be adequate?  Thanks in advance.

Thanks.  I'm not really planning on putting tons of peripherals in here - 2 hard drives, a dvd drive, and a 6800 GT.  If you're running it fine, it ought to handle what i'm putting in there.

Similar Messages

  • Will this power supply work with my PC?

    Will this power supply work with my PC?  I have a Compaq Presario SR5816F
    http://www.newegg.com/Product/Product.aspx?Item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...   
    http://www.amazon.com/Solid-Gear-Series-ATX12V-SDGR-500BX/dp/B00FF7VEJE
    This question was solved.
    View Solution.

    JCGood1984, welcome to the forum.
    The computer should take a standard ATX power supply unit (PSU).  I suggest measuring the existing PSU and compare the measurements to the one in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Will this power supply work for this tower?

    I plan on getting this computer
    LINK
    I feel like everything on the computer is adequate but the power supply is only 300W. I need more than this so I plan on using this power supply to upgrade it.
    POWERSUPPLY
    Can anyone tell me if this powersupply will fit and perform with the desktop I listed. Also if it does not, is there any suggestions as to what similar Watt power supply will work?
    Thanks

    Unless, for some reason, Asus didn't use the ATX form factor for that case, that power supply should work fine. 
    Unless you are upgrading other parts, hockey's concerns aren't warranted. A power supply that is "too big" is never a problem, it's actually better for the power supply because it runs at a lower load. And, the rails on that ThermalTake can manage higher amps than the stock one can, guaranteed. 
    It's tough to max out a 850watt PSU in a mid-size tower like that.

  • Will this power supply work with a k9n6pgm2-v2

    KINGWIN Lazer LZ-750 750W Modular 80 PLUS Certified

    Quote from: Henry on 06-May-10, 12:36:25
    You would be better off getting the Corsair TX650W single rail +12V~52A at newegg. Fresh price today, buy it now as it's the lowest cost it will ever be and where you live you'll get it in 2 or 3 days. It will take about 9-10 weeks to get the rebate, at least that's how long it took for mine.
     $70, compare that to the price (almost 1/2) of the Kingwin and you'll be getting a much better PSU with the same 52A +12V total output.
        $89.99
        ($69.99 after $20.00 Mail-In Rebate Card)
        Free Shipping*
    Edit:
    Just ordered the "Corsair" through eghead, thanx!
        $119.99
        $10.18 Shipping*    That Kingwin at newegg

  • Will this power supply be enought for a KM2M Combo-L Machine

    Will the following work with a 145 Watt Power supply?
    Basically I've got an Enlight Case I would like to use but it only has a 145 Watt Power supply.
    - MSI Motherboard for AMD processors Model KM2M Combo-L
    Chipset:VIA® ProSavageDDR KM266
    FSB:200/266MHz
    RAM:Supports four memory banks using two 184-pin DDR DIMMs or two 168-pin SDRAM DIMMs Max 2GB
    IDE:Ultra DMA 66/100/133 Up to 4 Devices
    Slots:1x AGP (AGP 2.0 2x/4x ) and 3 PCI 32 Bit
    Ports:1xFDD,1xCOM,1xLPT,2xPS2,VGA,LAN and Audio Ports
    Onboard LAN:6103 PHY 10/100 Mbs
    Onboard VGA: ProSavage8 2D/3D Graphic
    Onboard Audio: Realtek ALC 650
    - AMD Athlon XP 1700+ Thoroughbred /266 FSB Processor CPU 1700+/ 1.47GHz
    AXDA1700
    CPU: 1.47 GHz
    Type: 1700 XP Thoroughbred
    Cache: 256K
    BUS: 266MHz
    Micron: .13
    Socket A
    - CRUCIAL MICRON 256MB 32x64 PC 2100 DDR RAM
    184-Pin, CL=2.5-Unbuffered 2.5V, 6-Layers
    - Maxtor 40GB 7200RPM Hard Drive Model
    Size: 40 Gigabytes
    Interface: IDE ULTRA ATA133
    Seek time: RPM:7200
    Cache 2MB
    - Microsoft Multimedia Keyboard & Wheel Mouse
    - Aceex V.92 Full Duplex FaxModem PCI Voice, Data, Fax Modem 56000bps Modem
    - Cyberdrive 40x16x48 CDRW CD-RW Drive CW078
    Buffer: 2MB
    Read Speed: 48x for closed sessions.16x for open sessions. Maximum 40x for audio extraction
    Write Speed 4x, 8x,12x, 16x, 20x (CLV) and 20x, 24x, 28x, 32x, 36x, 40x (ZCLV) for CD-R media. 4x, 8x, 12x and 16x CLV for CD-RW media
    Access Time: 100 ms typical for random access, 100 ms typical for 1/3 stroke
    Power Supply: DC +5V ?5%, DC +12V ?10%
    Interface:Enhanced IDE (E-IDE)
    MTBF > 100,000 POH (25% duty, seek and read)
    CPU FAN|HAC-V81 BASE COPPER AMD/INTEL)
    Supported Socket type: Socket A, 370, 462 Processors:
    Intel P3 Cumine up to 1.13GHz, Celeron (tualatin up to 1.6Ghz)
    AMD Duron up to 1.7GHz, all Athlons up to 2600+
    Fan Dimension 80 x 80 x 25 mm
    Rated Speed 2500 ~ 4800 RPM
    Air Flow 31.4 ~ 62.8 CFM
    Rated Voltage 12 VDC
    Heat Sink Dimension 80 x 69 x 45 mm

    Depending on what company made the PS, most companies over exagerate what they will do, or give a peak power output instead of a constant rated amprage. If thier PS will maintain a constant 200watt under full load, then it will get the job done in a all-in-1 unit. Check this page for power consumption of all your parts. It`s kinda old and the values for the VC and processors could be a bit higher, but it will give you a good idea.

  • Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

    I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer?
    Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760
    Power Supply: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4668507&sku=C13-2511
    Any help is greatly appreciated, thanks.

    It is unlikely that the power supply will fit/work in your HP Pavilion p6213w Desktop Computer. Please consider the Corsiar CX500, CX500M, CX600, and CX600M for your power supply needs. These power supplies are the same physical size as the factory unit and are known to fit and work in most HP full-sized consumer desktop computers.
    There is a chance that the GTX 760 and other current generation video cards may not work in your computer. These newer cards typically require the computer to support the most current UEFI standards and many motherboards don't meet this criteria. Please know the return policy on any video card you purchase, in case it doesn't work. If the GTX 760 doesn't work, consider the GTX 650/660 Ti or equivalent AMD graphics card for your graphics card needs.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Will a HP-OW120F13 Power supply work with a DV7T-7000? It is from a DV8T-1100

    I just purchased a DV7T-7000 to replace my old DV8T-1100. I had purchased an extra power supply for when I travel. The power supply is a HP-OW120F13 Replacement spare part # 463953-001. The output on it is 18.5V 120W. The power supply that came with the DV7T-7000 has a output of 19.5V 6.15A.
    Can I use this power supply with the DV7T-7000? The plug to the laptop is the same.

    Hi @dfuerstenau ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • Will PFC power supplies work with SIMULATED sine wave inputs

    Will PFC power supplies work with a SIMULATED sine wave input from a UPS unit?

    Not sure whether you really meant "PPC" and have never heard of a PFC power supply, but if your question is whether a Mac PPC computer will run on a UPS, then the answer is definitely "yes" as my machine has shown twice in the past 12 months and several times in the past on the G5 tower and with a G3 B&W.
    I haven't dragged the old analog scope off the shelf to see what the UPS output really looks like, but I suspect it is no dirtier than the mains power in my neighborhood.

  • Is this Power supply suffiecent for my system?

    Hi, Is this PSU powerful enough to run my computer? SILENT PUREPOWER SERIES TT-420AD, 420WATT POWER SUPPLY, +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A. My computers specs are as follows: AMD athlon 2700XP, 2xVdata 512mb pc3200, ATI Radeon 9700pro, Seagate SATA 80GB hardrive, Hitachi DVD ROM drive, floppy drive, MSI KT6 Delta FISR. I want to know whether this power supply will have enough power to run my setup as I brought an ICUTE 400watt power supply that couldn't manage(no doubt cause its a cheap peice of sh*t) but since Thermaltake is a decent brand I'm thinking it should manage but I just want to be sure. Cheers

    Quote
    Hi, Is this PSU powerful enough to run my computer? SILENT PUREPOWER SERIES TT-420AD, 420WATT POWER SUPPLY, +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A. My computers specs are as follows: AMD athlon 2700XP, 2xVdata 512mb pc3200, ATI Radeon 9700pro, Seagate SATA 80GB hardrive, Hitachi DVD ROM drive, floppy drive, MSI KT6 Delta FISR.
    That PSU will support your configuration and then some.  I have several TT Silent PurePower 420W in service - no complaints.  Dual-fan PSU of good construction.  Whenever Newegg puts that PSU on sale for $36.99 with free shipping (regular $42.00 plus shipping), I jump on it.
    +3.3V and +5V are not a problem, you would be hard pressed to build a system that can place a combined load greater than 170W on +3.3V and +5V, even if you tried.  Your system power needs on +12V rail will be (MAX LOAD):
    MSI KT6 Delta FISR = .5A
    Athlon 2700XP = 7.2A (AMD Datasheet)
    2x V-DATA 512MB PC3200 - N/A
    ATI Radeon 9700PRO = 1A (see: O/C Radeon 9800 Pro)
    Seagate SATA 80GB = 2.8A
    Hitachi DVD ROM = 1.5A
    CPU FAN = .25A
    2x CASE FAN = .5A
    Max Total = 14A (rounded to the next ampere)
    Edit:  I should point out that 14A is the load expected if all these components are simultaneously placing their MAX load on the +12V, a condition that is virtually impossible to reproduce outside of a test lab.  For instance, HDD and CD/DVD drives generate max load during disk spin-up, thereafter demanding much less current for read/write/seek operations (approx. 1A).  Same with cooling fans.
    A real world 'continuous' consumption figure would be in the neighborhood of 10A.

  • Mini power supply works with Video iPod?

    Will the power supply that came with my iPod Mini work with the new 80GB Video iPod, which didn't come with a power supply? The adapters are the same but I don't want to fry the video iPod.
    Thanks,
    Brett

    Yes, it will work just fine.

  • I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol

  • Apple tv   viera cast 2008.  I want to add apple tv via hdmi connection, viera cast which has Amazon prime is already connected thru ethane port on tv.  my network is wifi from APE base and APX.  Will this set up work?

    I want to add apple tv via hdmi connection , and I already have ethernet input of tv for my viera cast connection, which gets Amazon prime.  Wireless connection is APE base and APX,  Want to add
    apple tv to get Netflix so I can cancel my xfinity premium channels.  Will this set up work.  p.s as you can tell I am a Mac novice.

    Providing you have a free HDMI port on the TV and the location you would put the Apple TV will allow it to connect to your network, you should be good to go.

  • Will this hard drive work in my iMac G5?

    Will this hard drive work in my G5? 
    http://www.amazon.com/dp/B005CT56XU/?tag=extension-kb-20
    Below are the stats for my iMac.
    Thanks for any help!
    Processor
    Memory
    Processor speed:
    - 2.0 GHz.
    Processor Type:
    - PowerPC, G5
    Number of Cores:
    - 1
    Bus Speed:
    - 667 Mhz
    Cache:
    64-bit Support:
    - No
    Turbo Boost:
    - No
    Installed RAM:
    - CTO
    Max. Amount:
    - 2.0 GB
    Amount of Slots:
    - 2
    RAM Speed:
    - 400 MHz
    RAM Type:
    - PC-3200, DDR, SDRAM
    Storage and Media
    Graphics
    Hard Drive:
    - CTO, 7200rpm.
    Hard Drive Brand:
    - Unknown.
    Drive Bus:
    - Serial-ATA
    Optical Drive:
    - CTO.
    Optical Bus:
    - Ultra ATA/133
    Other Media:
    Display Size:
    - 17-inch.
    Graphics Card:
    - ATI Radeon 9600
    Card Memory:
    - 128 MB
    Max. Resolution:
    - 1440 x 900
    BLU / Coating:
    - TFT LCD
    Networking
    Ports and Expansion
    AirPort:
    - Built-in AirPort Extreme (802.11 b/g)
    Ethernet:
    - 10/100/1000BASE-T (RJ-45)
    Bluetooth:
    - Built-in Bluetooth 2.0 + EDR
    Infrared:
    - None.
    Modem:
    - 56k v92
    USB:
    - 3 ports (USB 2.0)
    FireWire:
    - 2 ports (FW400).
    Display port:
    - Mini-VGA
    Card Slot:
    Thunderbolt:
    - No Thunderbolt port.
    Operating System and Software
    Temperature and Cooling
    Original OS:
    - Mac OS 10.4 Tiger
    Maximum OS:
    - Mac OS 10.5.8
    Recommended OS:
    - Mac OS 10.4.11
    iLife Supported:
    - Coming Soon

    Well, there are different versions of Sata.  See:
    http://en.wikipedia.org/wiki/Serial_ATA#Revisions
    I think this is the info someone would need:
    You may want to post machine info.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the word hardware.
    Leave out the serial number.
    Example:
    Machine Name: iMac
    Machine Model: PowerMac4,1
    CPU Type: PowerPC 750 (33.11)
    Number Of CPUs: 1
    CPU Speed: 600 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 768 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.1.9f1
    Look around & see if you can find the bus speed for the SATA.
    Robert

  • Will this Hard Drive work on my mid 2007 macbook?

    Will this hard drive work on my mid 2007 hard drive? The size is fine, but what about pins? Here is the link.
    Hard Drive:
    http://www.bhphotovideo.com/c/product/758498-REG/Hitachi_0S02858_500GB_Travelsta r_2_5_SATA.html
    My macbook specs:
    http://support.apple.com/kb/sp18 (Black)
    Thanks,
    Squirtly

    You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
    These are good online stores for Mac compatible RAM
    OWC 667Mhz RAM
    http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
    Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
    Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
    Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
    If you don’t have the tools to open up the MacBook OWC has a set for $5.
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • Will this hard-drive work in a MacBook?

    Will this hard-drive work in a MacBook?
    http://www.lambda-tek.com/componentshop/index.pl?prodID=1075517
    Thanks,
    Steve.

    Thanks for the quick replies...
    How about this one:
    http://www.misco.co.uk/productinformation/~Q966946~/SEAGATE%20MOMENTUS%202.5%201 00GB%207200RPM%20SATA%2F150%208MB.htm
    Is that the right one? How do I tell?
    Cheers,
    Steve.

Maybe you are looking for

  • Service remains in "offline*" state - how to reset it?

    Hello. Since two days ago, I've got a problem with one of the sevices on a S10 Sparc system. --($:~)-- svcs -a | grep \* offline*       Jan_08   svc:/application/oracle/database:RACE002 --($:~)-- svcs -xv svc:/application/oracle/database:RACE002 svc:

  • Pages not Syncing with iPhone 5

    Pages on my iPhone 5 running iOS 8 won't sync with iCloud Drive. In settings, I have "Sync with iCloud" and "iCloud Drive" turned on. When I open Pages and see no saved documents, I go back to settings and see that "Sync with iCloud" has automaticall

  • How do I delete an old g mail account

    Had a previous BB and got a new Curve9320. Used Desktop software to back up and restore from old to new phone. The old phone has been wiped and returned to my former employer BUT my new has 2 personal email accounts but also a icon for my former work

  • How do I fix error: cannot sync ipod due to missing file

    I have 4th generation ipod shuffle, but after having to do some work on computer, ipod no longer will sync and load purchased songs to my ipod. I have updated everything and reinstalled itunes. It starts to sync but then stops. I finally got an error

  • Why Inner join or Outer join is not used for Pool or Cluster tables  ?

    Hi SAP-ABAP Experts . With Due Regards . May u explain me why Inner join or Outer join is not useful for Pool or Cluster tables  ? because peoples advised not use Joins for Pool and Cluster tables , What harm will take place , If we do this ? Best Re