Will this RAM work for my early 2011?

I found this on apple's web site:
- 67.6mm x 30mm (1.18 inch)
- 2 GB or 4 GB
- 204-pin
- PC3-10600 DDR3 1333 MHz type RAM
Can I use this one:
Corsair DDR3 SO-DIMM 1333MHz 8GB KIT MAC
Kit w/2x 4GB, CL9, 204pin, Apple iMac, MacBook and MacBook Pro
with the following spec:
Type
DRAM
Teknologi
DDR3 SDRAM
Produktformfaktor
SO DIMM 204-pins
Hastighet
1333 MHz ( PC3-10666 )
Ventetidstiming
CL9 ( 9-9-9-24 )
Dataintegritetskontroll
Non-ECC
Egenskaper
Non-buffer
Voltage
1.5 V
(sorry for the norwegian)
Only difference I can see is that the one specified by apple has "PC3-10600" and the one this shop is selling is "PC3-16666"...
I don't know if that will cause problems...
Thanx,
K.

That macbookpro needs:
204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
so that Corsair set is correct.
But in this forum it is said always that a mac is very sensitive of the quality of new ram. And then most of the time Crucial or OWC are recommended.
In older Macs like yours (haha) I have used Corsair also once and did not have any problems.
Lex

Similar Messages

Will this RAM work with my early 2011 MBP?

http://www.amazon.fr/Transcend-JM1333KSN-4G-Mémoire-DDR3-SO-DIMM/dp/B00432SYU4/r ef=sr_1_1?s=aps&ie=UTF8&qid=1344152904&sr=8-1
I'll buy 2 of them, to double my MBP's memory - just checking whether they'd work. Also, has anyone got any experience in upgrading RAM?

Yes, that would work with your MB PRO.....you can upgrade up to 16GB...
It takes 10 minutes max to upgrade your memory...
just make sure you have a #00 Phillips screw driver....
10 screws in the back - 3 of them are long and 7 of them are short....remember where the long screws belong when you install them back in...
good luck..

Will this ram work for the original MBP?

Got a MBP and want to upgrade to 4g ram, will this one work?
http://www.bestbuy.ca/catalog/proddetail.asp?sku_id=0926INGFS10101436&catid=2036 1&logon=&langid=EN
thanks

Yes, that RAM module will work, but the original 2006 Core Duo model has a maximum of 2 GBs of RAM. You would need a Core 2 Duo model in order to install 4 GBs. If you have the 2006 C2D model you can install 4 GBs, but only 3 GBs will be available for use.

Will this Ram work for S10

Does anyone know if this would work for the S10?
http://bensbargains.net/deal/91668/
It's made by Super Talent, San Jose, CA. Thanks!
Message Edited by eracer on 01-28-2009 02:56 PM
Solved!
Go to Solution.

ok, that's better. while non-ECC memory supposedly works in the S10, i believe it's set up to normally accept ECC memory. also keep in mind that if combining memory, you can't use non-ECC with ECC as the S10 won't boot past POST.
part of the benefits of having a proper workstation is error checking. in my opinion ECC memory is the best way to go, even if non-ECC memory works.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

I brought a iPhone (A1429) unlocked, sent it as a gift to my mate in Arizona, she is on the Verizon Network which in CDMA Will this phone work for her or have I just wasted $900 :/

I brought a iPhone (A1429) unlocked, sent it as a gift to my mate in Arizona, she is on the Verizon Network which in CDMA Will this phone work for her or have I just wasted $900 :/ I have done all the research and to me it looks like it should work.
Can anyone give me a difintive answer please.

Yes but I have brought the A1429 where as the information you provided states that it's the A1428.
The unlocked iPhone 5 is model A1428. For details on LTE support see www.apple.com/iphone/LTE. The unlocked iPhone will not work with CDMA carriers such as Verizon Wireless or Sprint. Learn more about the unlocked iPhone
And Apple websight also states that the A1429 is both CDMA and GSM here: http://support.apple.com/kb/HT3939#iPhone5

Will this battery work for my laptop?

I have a laptop from like 2009. It's going to crap and I recently got a new one, but it still runs, albeit slowly on startup and everything, and I think it's because of the battery, as it says "Consider Replacing Battery" and when I unplug the charger it just shuts off, and it only charges to 51%. So what I want to know is will this battery work for my laptop? http://www.amazon.com/gp/product/B007W1QBO4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AF7ENLFPN87DK
The battery right now says "Replace with HP Spare 593550-001 and says 2010/10. This battery says 593553-01, but it looks almost identical to my current battery. So will this get the job done?

Hi,
What is the model of your computer ? (HP 2000 is a series, not a model). Please check the compatible list:
http://partsurfer.hp.com/Search.aspx?SearchText=593553-001
By the way, slow booting up may not due to weak/faulty battery. Can it boot faster using AC ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Will this RAM work in MBP 15inch

Will this ram fit our 15 MBP bc this is another great deal
http://www.frys.com/product/5468099

I tried using the memory finder on the Frys' site and the link to the Apple page errors out. Do you really want RAM from someone who can't keep an Apple RAM link working? I buy a lot of stuff from Fry's retail store but not RAM. Even in-store, they seldom have proper Mac memory charts.
Like SIG says, post more details about your machine to get better advice on finding the right RAM. The easiest way is to do "About this Mac..." and then click "More Info..." in the resulting window. You'll get the System Profiler screen; copy the info on the first screen and paste everything except your machine's serial number into a response. For example, doing that with my MBP gives this info:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B05
SMC Version: 1.16f10
Serial Number: xxxxxxxxxxxxxx
Someone can look at this and tell exactly which model you have and what RAM it takes.

Will this configuration work for CS5.5?

Will this Dell work? Intel i7-2600? 16 GB dual channel DDRS SDRAM at 1333Mhz, nvidea geforce gt530? Want to buy Production Premium but have limited budget, don't need top of line computer performance, just workable ... All advice greatly appreciated. (I couldn't find in tech specs which video cards are supported.) Am also looking at Canon XF 100, which i think is supported by CS5.5, right?

John,
The GT 530 is very slow. It has only 96 cores, crummy DDR3 video RAM, only 128-bit memory bus. Basically a GT 430 with a new OEM-only name on it.
The Quadro 4000 is a ripoff as far as Premiere Pro CS5.5 performance is concerned: It is basically similar in performance to the GTX 460 SE (not the regular GTX 460): Only 256 cores on the Quadro 4000 versus 288 cores on the GTX 460 SE. Worse, the Quadro 4000 costs five times more money than the GTX 460 SE.

Will this ram work in macBook Pro

Will this work for my macbook pro? Will macbook pro support 4 Gig or ram?
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16820220229&SortField= 0&SummaryType=ALL&Pagesize=50&Page=
MacBook Pro Mac OS X (10.4.9)

It will work fine, but as the other poster stated the price is high. You can purchase the same memory at DataMem for $126.00.
If you have a Core 2 Duo Mac you can install 4 GBs of RAM (two 2 GB DIMMS) but only 3 GBs will be usable. The remaining 1 GB resides in an address space currently used by the operating system and thus not available to the user.

Will this RAM work wit my G5

Im about to buy some ram on sale... i noticed the only difference there is: my mac 2.5V - and the ram im buying is 2.6v ! Will this work, or am i gonna have some problems!
1024MB DDR SDRAM PC3200 Kingston
KVR400D8R3A/1G KINGSTON 1024MB DDR PC3200 ECC REG -
1 x 1 GB (1 GB) / DDR SDRAM / PC3200CL3 / 400 MHz / ? Bit? ns
Im buying 2 of those!

Use un-buffered. That is the spec. Other posters here in the forums have had problems trying to run other than un-buffered. Also, only the latest models of G5 support buffered RAM. Older models do not.
Using RAM outside of the specs that Apple gives, is risky business with G5's.
As far as the voltage goes, companies like Crucial back their products, and, if they say it will work, it's probably so.
OWC fully tests, and backs, what they say will work in your/a given machine.
These two companies are trusted suppliers of Mac compatible RAM. There are others, but these are the two I recommend. Others in these forums feel the same.
If you search these forums, you will find that RAM problems in G5's are VERY common, especially with people who buy RAM non-Mac specific (generic, or value RAM), or those who buy RAM outside of the Apple spec, without compatibility testing.
Another factor, with the RAM modules (and NOT in the spec), is that Mac's run better with low density chips, and will often times not even recognize medium to high density chips. Medium to high density chips are very common in "value" RAM, and in RAM that is generally sold for PC machines.
So, again, I think it's best to buy from vendors who actually test the RAM in the machines they say it works in, or from those with a proven track record of supplying Mac compatible RAM.
Along with this, staying as close to the Apple spec as possible, will help avoid potential issues.

Does anyone know if this HD works with a early 2011 MBP?

Looking to upgrade my internal HD on my early 2011 MBP. Before placing the order, would like to get some professional advice.
The HD being considered is:
SAMSUNG Spinpoint M9T ST2000LM003 2TB 5400 RPM 32MB Cache SATA 6.0Gb/s 2.5" Internal Notebook Hard Drive
Thanks in advance for all advice/inputs

Oh, sorry, I didn't note that I am planning on using logic 8 to attempt this. I don't have access to a machine with logic and pro tools installed to try it myself, else I would.

Will this ram work?

hi there, am soon hoping to purchase a new intel-imac i jsut want to be certain whether this ram will work in it:
http://www.dabs.com/productview.aspx?Quicklinx=3VTJ&SearchType=1&SearchTerms=PC2 5300&PageMode=3&SearchKey=All&SearchMode=All&NavigationKey=0&v=2#infoarea

That RAM won't fit into an Intel iMac.
You need laptop sized RAM also called SO-DIMM, 200 pin.

Will this setup work for Color Calibration / Matrox / Enzio Monitor

Hi, I'm getting conflicting answers from Matrox forum and DVinfo.
I'm wondering if this setup will work for editing wedding films as well as doing color correction...
I'm using FCP 7 / FCS 3. I have a DVI input as well as a DisplayPort input on my Mac Tower which is about year old.
Monitor: http://www.bhphotovideo.com/c/product/687611-REG/Eizo_CG223W_BK_ColorEdge_CG223W _22_Widescreen.html
Converter/Capture Card: (This is where I'm confused.) I'd also like to keep it under $800 if possible and be compatible with FCP X
http://www.sharbor.com/products/MTXN5010167.html
Can I also use a displayport to HDMI to connect my Mac tower to the Matrox as well as a HDMI to DisplayPort to connect the Matrox to the monitor or will this ruin or downgrade the signal?
Or is there another card that I could use that is simple to install?
Thanks for you help!

>Can I also use a displayport to HDMI to connect my Mac tower to the Matrox as well as a HDMI to DisplayPort to connect the Matrox to the monitor or will this ruin or downgrade the signal?
No. The Matrox MXO2 line connects one of three ways: PCIe slot in MacPro, Express34 for MacBook Pro, and Thunderbolt (additional cost for the adapter). If you have a MacPro..you put the MXO2 adapter card into one of the PCIe slots, then connect that to the MXO2 box.

Will this RAM work with my mac?

Hello,
I have had my iMac for a year now and recently I have decided to upgrade the memory.
I bought the mac with one stick of 1 GB PC3200 ram already in, and now I want an additional 1 GB. I did my research and think I have found the right ram at a reasonable price.
the following link is to a stick of Kingston 1 GB PC3200 RAM non-ecc with a CAS latency of 3.
http://www.pricegrabber.com/searchtechspecsfull.php/masterid=1515555
everything seems fine except two things.
1.) How can I figure out what the CAS latency of my current RAM is? ( I am guessing 3 is standard, so that I should be fine, but if there is a way to check I would appreciate that)
2.) Does valueRAM actually lead to system problems for macs? ( I read an earlier post that said that they might lead to kernel panics)
If anyone has any information to help me I would be extremely grateful.
iMac G5 2.0 GHz (pre-iSight) Mac OS X (10.4.8)

Thankfully I figured out the best way to deal with this RAM compatibility problem.
Instead of paying 150 for the Samsung ram from OWC I took a little bit of time to check ebay and found the exact RAM that is in my computer (down to the part#) for 120$.
I pay 20 bux more, but in return I don't have to worry about any technical problems arising from incompatible RAM and pay much less than what OWC offers.
iMac G5 2.0 GHz Mac OS X (10.4.8)

Why will this not work for combo box

I need to know why this will not work a combobox but it works for text fields. Isay ther is an error in the doc.createTextNode.
Please any help would be great.
Thanks
// Repeats for each Element in the User Configuration.
item = doc.createElement("COMPANY_NAME"); // Create element
item.appendChild( doc.createTextNode(SetupCompanyNameJText.getText()) );
UserConfig.appendChild( item ); // atach element to User Config element
item = doc.createElement("INTIALS"); // Create element
item.appendChild( doc.createTextNode(SetupIntialsjComboBox.getSelectedItem()) );
UserConfig.appendChild( item ); // atach element to User Config element
item = doc.createElement("FIRST_NAME"); // Create element
item.appendChild( doc.createTextNode(SetupFirstNamejText.getText()) );
UserConfig.appendChild( item );

when I do that I end up with the following
Error: #:300: class Configuration not found in class
any ideas
thanks

Will this RAM work for my early 2011?

Similar Messages

Maybe you are looking for