Will this Solid State Hard Drive Fit in a Desktop Computer?

Will this Solid State Hard Drive Fit in a Desktop Computer?
http://www.newegg.com/Product/Product.a … 6820208315
Any info is greatly appreciated; thanks!

I think you'll need two adapters as well. One to mount a 2.5" drive in a 3.5" bay, and one to convert the smaller 2.5" IDE connector to the bigger type found in desktop PCs and a separate power plug.
Here's two examples. I'm not recommending either of these products, they're just the first ones I found!
http://www.newegg.com/Product/Product.a … 6812116211
http://www.newegg.com/Product/Product.a … 6817984006

Similar Messages

Will this solid state hard drive be compatible with HP Pavilion dm4-1265dx

My stock hard-drive is done for so I thought I would take a bad situation and turn it into an opportunity to upgrade. I want to replace my hard-drive with a 750GB or 1TB SSD or Hybrid, but having a lot of trouble figuring out which one will be compatible.
Will this hard-drive be compatible with my laptop, is it even good?
http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ/ref=dp_ob_title_ce
and/or can anyone recommend one to me that will do the trick, of course I am trying to keep cost's down,
Thanks you all so much for the help,
This question was solved.
View Solution.

Hi,
I believe I did reply this message elsewhere few days ago. Anyway. 750Gb or 1Tb is fine for your machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

yes you can do it and not void the warranty. Those are the only hardware changes that Apple permits. Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.

I am replacing my existing SATA hard drive to a Solid State hard drive and want to image the drive, is this possible?

I am replacing my existing 320 GB SATA hard drive that clicks and makes weird noises to a Solid State hard drive and want to image the drive, is this possible? I then want to replace the DVD with a secondary large drive for storage.
So I am looking for any "gotchas" that I may be unaware of.
Thanks!

Put the Old drive in an external notebook drive enclosure. Install the SSD in your computer. Boot from your Old drive's Recovery HD:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Clone Lion/Mountain Lion using Restore Option of Disk Utility
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the New SSD. Source means the external Old hard drive.
Set the new Startup Disk to the SSD and restart the computer.
This process clones both your old OS X volume and the Recovery HD volume to the SSD. You can use a similar process to clone the SSD to the new hard drive you will install.

Will my Pavilion dv5224nr notebook support a solid state hard drive?

I am currently running Microsoft Windows XP Media Center Edition Version 2005 (Reporting Version 2002); I have 1 GB RAM installed on my Pavilion dv5000; Model dv5224nr.
I am considering the followin upgrades to my system:
I would like to install a 120 GB Solid State Hard Drive,
Upgrade my Memory to 4 GB
Upgrade my Operating System to Vista Ultimate, 64-bit
Will my system support these upgrades?
Dave

Your laptop will only support a SSD drive through a 1.8" or 2.5" USB external hard drive enclosure. You cannot put one inside the laptop itself so your setup would be intresting if planning on putting a OS on a SSD. They are great for extra storage and you could still run windows off of a external but I do not suggest it as it's not worth the problems windows will most likely give you.
First thing is to get that 1GB upgraded to at least 4GB for any version of windows - these days all apps are memory hogs and 1GB is making your machine push it's limits while not being fast or burning hot. Vista is a good choice for OS and I wouldn't attempt Windows 7 on the dv5000 series due to the specs.
Hope this helps, good luck...
Justin
Take care,
Laptop
Motherboard Guide

I want to change screenshot location from my Solid State hard drive with OSX on it, to my 2nd storage hard drive, how do I do this?

I want to change screenshot location from my Solid State hard drive with OSX on it, to my 2nd storage hard drive, how do I do this?
I am aware of "defaults write com.apple.screencapture *location*" but I want to change the location to my 2nd drive which doesn't have OSX on it... everytime I've tried to insert MacintoshHD2 in there it just doesn't work... any tips?

I'm having the same problem. I've entered the following path in terminal:
"defaults write.com.apple.screencapture location /Volumes/Macintosh HD 2/[my username]/Downloads"
But it's not working. It keeps going to the SSD Downloads folder.
What am I doing wrong?

Can I put a solid state hard drive in my older MacBook Pro?

Can this Macbook pro 2.2GHz MacBook Pro (MC723LL/A) be upgraded to a solid state hard drive?

Yes. Visit OWC for suitable SSDs from their 3G collection. Also, you may look into their DataDoubler that lets you remove the optical drive and install the HDD in that space. They also will have some installation tutorials.

I have a 2007 20" iMac. Can I get a solid state hard drive installed? Can the Apple store do it? How long? What cost?

I have a 2007 20" iMac. Can I get a solid state hard drive installed? Can the Apple store do it? How long? What cost?

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

Solid State Hard Drive Replacement For HP ENVY TouchSmart 15-j053cl?

Hello there,
I want to swap out my current 1TB harddrive from my year-and-a-half old HP ENVY with a 500 GB solid state harddrive that I just purchased from Amazon.
Two questions:
1) Is this solid state harddrive compatiable with my computer (specs below)?
2) I want to reinstall windows onto the solid state harddrive after I install it (assuming its compatable). How can I go about putting Windows 8 on a bootable usb drive to do this? The computer does not have an optical drive and I don't have an external optical drive, so installing Windows via bootable usb is my only option.
I'm aware I can "clone" my PC onto the external harddrive if I wish, but I'd rather do a clean install if I can.
Computer Specs:
HP ENVY TouchSmart 15-j053cl
Product: E0K05UA#ABA
Solid State Hard Drive Specs:
Samsung 850 EVO 500GB 2.5-Inch SATA III Internal SSD (MZ-75E500B/AM)
http://www.amazon.com/gp/product/B00OBRE5UE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Please let me know any advice you may have. Also, please feel free to ask any questions - hopefully I provided enough details.

Windows 8.1 has a built-in tool to make a recovery usb drive:
http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
The HP Backup and Recovery app can also do it. This is a factory clean install image and any data and programs you have added will be lost. If you have an external hard drive you can also do a backup with Windows File History. Then, add the backed up files to the factory install. You can also use File History to make a system image type backup and restore it to the new drive using a repair disk but this is virtually the same as a clone, which you said you do not want.
Manual
Your service manual linked above. See page 47.
The Evo 850 is the best SSD on the market in my humble opinion and will work just fine for you.
If this is "the Answer" please click "Accept as Solution" to help others find it.

2011 MACBOOK PRO WITH SOLID STATE HARD DRIVE.

Hello everyone. I would like to know is it worth going with the 512 solid state hard drive or the 750 at 5400 rpm or 500 at 7200 rpm. My use is for Audio programs such as Serato, Logic and Protools. I would like to know if anyone has the solid state and how you like speed of the computer. Basically is it worth the 1100.00 extra.

No one probably wants to touch this because it really is about how high end a user you can afford to be. I suspect your audio programs will work fine with a 7200 rpm hard drive, depending perhaps on file sizes. I did buy a 512gb ssd and put it in my 2010 mbp. It has read and write speeds comparable to what Mac promises with the in-house drives (maybe a little faster). If you can afford an ssd you would never go back to a hard-drive. It removes a performance bottleneck that will always be there to some degree with a regular hard-drive. 512gb ssd's are a luxury at this point. Your call.

Putting in new solid state hard drive

I'm trying to instal a new solid state hard drive into my Pavilion p-6. I ordered the re-installation disks from HP. The new solid state hard drive is smaller than the original drive. When I put in disk#1 the disk promt tells me the new hard drive is smaller than the original and it will not continue the process. HOW CAN I OVER RIDE THIS? And make this work?

Hi,
The information that I had last received from HP internal indicates that a 160 GB SSD would be the minimum size required before the HP external recovery media will work.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

T400s solid state hard drive already full

I have a newly-purchased t400s with a 120gb solid state hard drive. The drive is already almost full, and I have only uploaded about 35gb of data from my old computer. How is this possible? Are there specific programs that are eating up my storage space? Thanks.
Moderator edit: Added detail to subject.

Is it a Lenovo-provided installation or your own clean install?
How long have you had it? is it doing those ridiculous R&R automatic backups to itself?
What's the partitioning layout shown in disk management? Service partition? Recovery partition?
From the above you can tell I have no idea what's going on...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Recounting My Successful Experience Upgrading My Solid State Hard Drive

I just successfully upgraded my solid state hard drive from
60 gigabytes to 256 ; the machine is a Lenovo T400s - while the upgrade is
still fairly fresh, I thought I’d share my experience – maybe someone else will
benefit – most of what I’m about to relay was provided by Zoltanthegypsy and
GMAC-R60 – I thank them again for their advice - but I will try to add some
additional thoughts based on my experience – for the most part I was able to
use the tools provided by Lenovo – my original hard drive had 3 partitions, S
(system), C ( windows + my programs & data), & Q ( Lenovo stuff like
backup and restore, the factory copy, etc.) :
Create a “factory state” copy of the machine to
DVD or CD soon after purchase – I say soon after purchase because it appears that
a minimum amount of hard disk space is required – my 60 gig was almost full and
I got a message that there wasn’t enough space – I can still make the copy but
I’ll have to move some things off temporarily – this step isn’t really related
to the upgrade but it is a good idea – Start/Lenovo ThinkVantage Tools and you’ll see
the option – and as Zoltanthegypsy has pointed out you will most likely not be
able to do this from the new hard drive after the restore operation covered
below – I haven’t proven this out but I do know that my Q space on the new
drive is smaller than before – something was lost and it’s most likely the
factory state – and so keep the old hard drive long enough to make that factory
state copy to DVD or CD.
The next step was a full backup to a Lenovo
external hard drive – it came with one partition - the external that I got from
Lenovo has a small keypad and is password enabled – this fact will come into
play further on – as GMAC-R60 noted a pop-up will appear giving the option to
create rescue media – you want to select this option so that the external will be
bootable.
When the backup is complete you want to swap hard
drives making sure to first unplug & remove the battery .
There may be other ways to do this next step but
here’s what I did – I powered on the machine and let it go through what
appeared to be a BIOS routine – note that my external was attached to the
laptop but it wasn’t activated by keying in the password – after the BIOS
routine was finished I activated the external by typing in the password and then
did a Control/Alt/Delete – the machine restarted and booted from the external –
with hindsight I probably could have connected & activated the external
before powering on but the instructions that came with the external suggested
something different which didn’t work for me .
I was now able to go into rescue and recovery
and do a complete restore to the new drive – but to my surprise the extra space
that I bought with the new drive ended up all in the Q partition – and Windows
Disk Management didn’t enable me to reallocate the space to C.
And so I purchased Disk Director 11 Home by
Acronis – a $50.00 investment in a tool that I’ll probably never use again but
I’m now able to use an $800 solid state drive rather than trying to recoup some
money via Ebay -– within minutes I was able to reclaim the space and I now have
enough C space to last the lifetime of the laptop – especially since all
pictures go on a stick & my demographic isn’t into video games .
One useful piece of information that I got from
a user on the Acronis forum was that all of the Lenovo tools like rescue and
recovery, etc. are available for download from the Lenovo website – and so if worse
came to worse I could have deleted that Q partition, stretched C using Windows
Disk Management , and then downloaded the Lenovo tools into C.
One thing I’d like to learn to do would be to
perform all the steps outlined above but without using the Lenovo tools – using
Windows 7 tools instead but not having a Windows CD , i.e. how do you boot

It went something like this:
(On the stock drive)
Plugged in a blank USB HDD, and a blank USB flash drive.
- HDD formatted in NTFS, flash drive in FAT16.
Ran the recovery media creator.
- Created bootable media on flash drive, and put the recovery image on the HDD.
Once done, shutdown, removed the battery, swapped the drive for a 500GB Scorpio Black (freshly NTFS quick-formatted). USB HDD and flash drive were still attached.
Booted, and used F12 to select the flash drive for booting.
It booted into the Windows Recovery Environment and I chose the Lenovo restore factory image option at the bottom of the list.
From there on out, I just clicked through the wizard, and it restored.
Upon finishing, I unplugged all of the external media, and had it restart. It then booted into OOBE as expected.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

Disk Drive Full. Whats the best way to transfer operating system to larger non solid state hard drive .

Heres the Lowdown,
I have a Desktop that has a 250 G Solid state hard drive , and a secondary 750 G Hard drive.
My OS is installed on the solid state , and also a lot of my audio software which needs to also be on the same disk drive as the operating system ;
Problem is I've run out of room and continually get DISK FULL error messages , which stop me from doing any real time audio tracking and recording.
I've backed up all files to an airport drive ( I'm a bit paranoid about losing vital info) .
Is there a way to reinstall the OS onto the second larger drive and just transfer the remaining software across
Will I have to reinstall all previous versions of software if I do this?
Will The processing slow down if the OS is run on the Standard drive rather than the Solid State drive ?
Last time I tried to clear some space on the OS drive I accidentally deleted vital information, so I wanna make sure I do this properly.
Any advice would be much appreciated.

Carbon Copy Cloner (1 Month Demo with full capabilities). Because CCC also has the ability to transfer your Recovery Partition
SuperDuper (Free for a full clone). Recovery partition will not be transferred
Applications -> Utilities -> Disk Utility -> Restore (from SSD to 750 hard disk). Recovery partition will not be transferred.
Or install the OS on the 750 hard disk (with will install a recovery partition), then use migration assistant to move your files over. Or you could then use one of the above utilities to overwrite the just installed OS without messing with the recovery partition.

Will this Solid State Hard Drive Fit in a Desktop Computer?

Similar Messages

Maybe you are looking for