Will tiger revive my firewire ports?

(this is a repost of a question I posed on Imac CRT - I thought that this may be a more relevant place to post it)
I have a G3 600MHz - early 2001 blue CRT running Jaguar. (I updated my firmware properly before putting Jaguar on [update - I am not sure about this and will retry this today]).
The hard disk is getting filled and my new Lacie firewire external drive won't mount. I noticed last year thaat my kid's Ipod would not mount via firewire on the G3, but I had not used the ports since buying the computer. Both devices connect readily to my G4 laptop, so they work. The G3 firewire ports appear to work - both devices appear in the G3 system profiler (by name) but not in the disk utility (nor on the desktop of course, making them unusable).
I have read quite a bit about this problem and done many of the recommended steps - I have pinged the PRAM and reset the PMU but have had no luck. I recently read that updating to Tiger can revive these ports as Tiger communicates differently with firewire devices (the Lacie help had heard this, too). Have any experts there heard this?

Try this:
http://docs.info.apple.com/article.html?artnum=88338
Scroll down to the bottom for resetting the ports:
"Shut down the computer.
Disconnect all FireWire devices and all other cables, except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the FireWire device(s) (one at a time if there is more than one) and test. Test with each FireWire port if you have more than one."
If that fails then installing Tiger might help. It could be some piece of software for Firewire support is missing or damaged and Tiger will reinstall it.
Make sure you download the latest driver from Lacie.

Similar Messages

  • My macbook does not have a firewire port. Is there any kind of adapter that will allow me to use my advc 300 (which need to plug in to the FireWire port)?

    My macbook does not have a firewire port. Is there any kind of adapter that will allow me to use my advc 300 (which need to plug in to the FireWire port)?

    Firewire, USB and the recent thunderbolt use completely different protocols, therefore there are no adapters for mutually adapting them, just a computer, which allows connecting them, and will work as an interface. For example, if you have an external disk in an enclosure with only FW connection and another one with USB connection, just your mac, having both, allows their interconnectivity.
    If your mac does not have FW (the brief alu MB series, Air) you cannot connect a FW device, if only FW port is there.

  • Why would the Firewire Port and/or External DVD-RW suddenly not work?

    Hi, it's me again. I swear, I must be destined to just use Windows machines...
    Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
    Ok, so that is the back story to my problem, which happens to be this:
    I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
    So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
    I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
    I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
    But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
    I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

    Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
    but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
    I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
    I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
    For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
    Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

  • Recent Leopard Update Messes up Cinema Display Firewire Ports

    Okay, this is really odd. I have a Lacie Porsche DVD-RWDL Firewire drive hooked up to my Mac Pro via my 23" Cinema display. The cinema display firewire cable was connected directly to the back of the mac pro. Lastly my iSight was connected to the open firewire port on the Lacie. This worked just fine for the longest time under both Tiger and up until very recently in leopard.
    Now tho the DVD Drive is not recognized by any programs (Toast, etc) or by System Profiler (Unknown Device) when it is connected to the cinema display. Oddly enough it is detected when connected directly to the mac pro (or for troubleshooting sake I tried my G4 cube w/ Tiger... it also detected it). On top of that the iSight will work when plugged into either the Lacie or the Cinema Display... so its not like the cinema display's pots are dead (the USB works fine).
    This is pretty obscure I know... but has anyone ran into something similar? I figure its either some very, very weird hardware problem or or one of the many recent updates to leopard has things acting goofy.
    Thanks

    I have a similar problem with my 20" cinema display. Try unplugging and replugging the device. That's been working for me, although it is an annoyance.

  • 10.4.7 Update killed my firewire ports

    Hello -
    All was going quite well this morning, but then I upgrade my machine to 10.4.7 which killed my firewire port.
    All I get in System Profiler is:
    "FireWire Bus:"
    No bus info is displayed. It was working this morning before I did the update.
    I already zapped my pram, reinstalled the firmware required to run my GigiDesigns card, rebuilt permissions, cleaned out every cache possible with "Main Menu".
    Any thoughts? tips? Tricks?
    Thanks - Dustin
    G4 Quicksilver, 1.8 GHz Giga Designs   Mac OS X (10.4.7)  

    What is the status of the computer's built-in Firewire ports? If they are OK, then your PCI card may not be compatible with 10.4.7. If that's the case check with the manufacturer's website support.
    When you installed the update did you use the Combo Updater or the Delta Updater (via Software Update?) If you did not use the Combo Updater, then download it and re-install the update. Before doing so do the following:
    Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Firewire port settings

    Hi I just got a Seagate free agent 2TB external drive. It connects with a firewire to my imac, tiger computer. Worked great to transfer all the info to the drive but when computer or drive (not sure exactly when this happens) goes to sleep and I try to access info on the external drive it freezes the computer and nothing works. The drive works great and does not freeze when connected through a USB port. The Seagate tech people tell me that I need to turn the power off to the firewire when the computer goes to standby or sleep mode. They claim that when the computer goes to sleep the light on the external drive goes off (meaning no communication with the computer) but the drive still spins because the power is on thru the firewire and he claims that turning the power off to the firewire when the computer goes into energy saving mode will solve the problem. Does this make sense? and if yes how do I do turn the power off to the firewire port whent eh computer goes to energy save mode?
    Thank you!

    Hi.
    Are you using the external power adapter? If so, the drive should start spinning automatically after wake from sleep, or when the Finder (or some other app) needs to open some file located in it. You should verify the power brick is working correctly, and also try a different FireWire cable, I tell you from personal experience, as I had a very strange problem with a brand new Maxtor OneTouch4 Plus: one night it made the Finder hang, and lock the system, everytime I tried to access it, until it just unmounted by itself, and wouldn't mount again, no matter how hard I tried.
    It showed up in System Profiler, and even Disk Utility could spot it, but it would hang or plainly fail when attempting to repair it. The culprit: the original, Maxtor branded, FireWire cable. It was thick as a garden hose, and the whole thing was just a few weeks old...
    Good Luck.

  • Firewire port not working Mac Mini (G4 1.25ghz)

    Hi,
    The firewire port isn't working on my mac mini, I've tried several devices, but none are connecting. I was wondering if anyone else was having this issue and possibly a solution. The only software installed on the computer since the firewire worked last was Apple updates, so maybe other mini's lost firewire somewhere along the way.
    Thanks, and Thanks
    W

    This worked from Smokerz in the Power Mac G4 forum:
    1. Shut-down your Mac, and unplug the power cord
    2. Turn the power off on your external FireWire devices
    3. Unplug the FireWire devices from the Mac
    4. Wait for 5 min.
    5. Plug the power cord to your Mac only
    6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
    7. At the ">" prompt type:
    reset-nvram and hit the Return key
    set-defaults and hit the Return key
    reset-all and hit the Return key
    the last command will restart your mac
    8. Shut down your Mac
    9. Connect all your FireWire devices to the Mac and turn them on
    10. Restart your Mac.
    Works fine now thanks Smokerz!!!!!
    also repaired permission and reset PRAM, nothing worked until I did this.
    W

  • Problem importing video from a DV camera into the new imovie 10.0?  I have a Sony DCR TRV17 connected via Firewire port that worked in 9.0.9 but not under 10.0...

    I have a Sony DCR TRV17 that I used to pass through VCR tape video via Firewire port to my Mac Pro under Imovie 9.0.9 without an issue.   Now under Imovie 10.0 the video shows in the import window, I can start recording yet when I stop recording the recorded clips do not show up anywhere.  The movie file I'm creating still indicates that I still need to import video.   Anyone having similar problems?

    Hey Dave,
    I had this issue only once before but was lucky enought to find it was a specific event causing the import to freeze. It took me some time to isolate the problem though. I would recommend letting it sit there for some time before you try any troubleshooting. Larger libraries can take long periods of time to update.
    This is a good thread for this issue.  I would first try removing the iMovie.plist as elikness mentions.
    1. Open Finder
    2. Click on "Go" in the menu bar.
    3. Click on Go To Folder on the dropdown menu.
    4. Type "~/Library/Preferences/" in the text field and click Go.
    5. Find the com.apple.iMovie(some number).plist file and move it to Trash.
    Quit and relaunch iMovie to see if this took care of the issue before attempting the next step. If you're still having an issue then you can try what I needed to do which is isolating the problem event.
    1. Open Finder.
    2. Go to the Movies folder. You should see iMovie Events here.
    If you have a larger event library I'd recommend renaming the iMovie Events folder to say, "iMovie Events COPY". Then create a new empty folder named “iMovie Events”. When you launch iMovie 9.0.9 all events will be missing at this point. Quit iMovie if it is open. Then you can either drag each event from iMovie Events COPY to iMovie Events or you can select and drag several at a time. Each time you drag an event folder back into the new iMovie Events folder launch iMovie 9.0.9 to see if you are having the same issue. Wash and repeat until either you have found the problem event or you have imported all events.
    If you find the problem event you can reimport the clip from iMovie 9.0.9 by going to File > Import > Movies and navigating to that events iMovie Original Movies folder to find the clip.
    Hope this helps!

  • Leopard USB and Firewire Ports

    With leopard 10.5.1 loaded, I frequently get the grey screen of death (kernal panic) if I have a USB device plugged in (other than the mouse and keyboard). I have Pantones's Huey (Screen calibrator) attached to the USB on my keyboard. After reading many forum issues about USB devices jamming up Leopard, I decided to unplug the Huey sensor... no more problems! Also I have a 500 GB WD My Book Studio external HD plugged in the back Firewire 800 Port, it works well. Plug a Digital Camcorder in the front Firewire port.. not only does my camcorder not mount, but my machine spits out the external HD and gives me an error message about improper device removal. Please release 10.5.2 and include fixes for these external device issues!
    PS on a Tiger OS I have had zero conflict with these periferals

    When I first installed Leopard I got an "install media is corrupt" message about the Leopard Install disk right from the start. My first thought was the hard drive. So I purchased and overnighted an new 500 GB internal hard drive to back up the main hard drive. I erased and reformatted my main hard drive to install Leopard on. Same problem. I tried to install on the new 500 GB HD no luck. I also installed 2 GB dimms at the time. Turns out the dimms weren't agreeing with leopard. I returned the dimms for new only to have the same "corrupt media" message. Crucial explained that the memory should be largest dimms toward the processor (slots 1 & 2) and so on. I put all my memory back the way it was and everything seemed normal. I installed Leopard successfully. I started to get frequent Kernal Panics with everyday use (I do graphic design). I checked the forums and kept reading about problems associated with USB and this or that program. I unplugged my Huey (used for screen color correction) and Wha-lah. No more Kernal Panics.
    But, now my digital camera and my Dazzle 6in1 media reader do not mount and/or hang up my machine with a kernal panics. When I tried to boot from and use Leopards disk utility I got the "media corrupt" message again.
    I just hope 10.5.2 addresses the Leopard to hardware/USB/Firewire issues.

  • My external hard drive and cd burner does not appear on the desktop of my mini.  Using Firewire adapter from old to new firewire ports.

    I have a new Mac Mini (2013) and older external hard drive (Lacie) and cd reader/burner (EzQuest).  Both have the original Firewire ports and the Mini has the new kind.  I bought a cable with both kinds of ends but I plug them in and they don't show on the desktop.

    From what I've heard, sometimes certain devices will not have full functionality if they are FireWire 400 with an 800 adapter. Take Apple's original iSight external webcam. It had FireWire 400, and people report using a converter cable will give them video, but not audio.
    When I first got my mini, my usb cd burner wasn't recognised by Finder or Disk Utility. After repairing disk permissions and a reboot, it worked fine.

  • How to transfer files from an iMac without upgraded Migration Assistant to a new iMac that doesn't have a firewire port?

    Hello.
    I just purchased a new iMac. He's awesome. However, he didn't come with a Firewire port. (Bummer, because I have one from the last time (2007) I had to transfer stuff from my iBook...)
    When I turned him on, he wanted to use Migration Assistant to transfer files from the older iMac; she doesn't have the most updated Migration Assistant, though. (She works just fine, but she only has Snow Leopard.)
    Okay, so what I'm wondering is if I just have to use a huge external hardrive to move everything? If I do that, will my programs (Microsoft Office) move? I fear they won't move/transfer that way. Ugh.
    PLEASE HELP.
    Ideas? Advice?
    Thank you in advance!

    Firewire 800 (what the new iMac has) is 9 pin. FireWire 400 is 6 pin (what your old iMac has).  Hopefully you didn't damage your new iMac by trying to insert a FW400 cable into its FW800 connector. The numbers are important in the case of the ports. They don't interchange!!! Get the proper cable or risk damaging your new iMac.

  • Is a 1394 mini firewire port for DV cameras a regular firewire port?

    I wanted use the mini 1394 mini fire wire port for some peripherals (IDE drive in firewire enclosure). I have digital camera cable with a 4pin? mini firewire plug and a 6pin? normal fire wire plug (both are males). Or mini fire wire ports for cameras only. All I will do is some backups, performance is not needed.
    Just cause it fits, it don't make it right. (remember the ADB and Svhs cables?)
    I do not want to be surprised with a burnt inexpensive resistor that cost very much to change.
    Thankyou in advance

    No, Apple dropped the firewire port on the White Unibody MacBooks in 2009. If you you need a firewire port you'll have to upgrade to a MacBook Pro or get a used pre-2009 MacBook.

  • Firewire port does not always work to import movies from video camera

    I've been having issues with my Mac Pro lately, it is an 06 model. Opening up iMovie and starting the import process for video from my Canon camera, the software will not recognize that the camera is connected.
    In system profile I do see that the camera is connected via the fire-wire port and shows the correct name, etc.
    After a bit of troubleshooting, restarting software, I unplugged the fire-wire connector that is part of the dongle coming from the 23" cinema display and the camera appeared like it should.
    System profile indicated that the fire-wire connection from the 23" display was unknown. I do know that I can plug other items into the display and they work fine.
    Rebooting the Mac Pro did not have any effect either.
    Granted, it is working, but I wish I did not have to unplug the cinema display port each time I want to do this.

    The firewire port on the Display does not have enough internal power requirements to support some devices. Try the firewire port on the back of the Mac Pro. If you are using a firewire repeater then don't connect it to the Display firewire port, use the Mac pro.

  • Can I run an HDMI monitor from the Firewire port of my MBP?

    This may be a strange one
    I am running a late 2011 17" MBP running Mavericks (latest version as of July 2014).
    Currently I have a 4TB external thunderbolt drive attached. There is no thru port.
    My challenge is, I want to connect an external HDMI monitor, but this MBP only has the one Thunderbolt port, being used by the external drive.
    My hope is, that somehow, I might be able to MacGyver  something using the Firewire port since I cannot afford another monitor with a TB through at the moment....Technically the cabling would be possible, albeit a bit freakish.
    Something like:
    Firewire cable out from MBP, plugged into a FW to Thunderbolt converter, thunderbolt converter tip plugged into a MiniDisplayPort to HDMI converter box (like the Monoprice  MMP-MDP2H01), then from there to the HDMI monitor.
    Would the MBP detect the monitor and route the video signal through the FW port accordingly?
    Looking forward to some expert advice and any zany workaround suggestions you all might have!
    Respect.

    The MDP to HDMI will work fine.
    Captfred

  • Sony digital8 camcorder via firewire port, is it digital or analog?

    hi all,
    I was successful to view & record from my Sony digital8 cam via firewire port. I'd like to know, is this connection analog or digital? Has anyone been successful to record, back up and edit their precious home videos on a G4 PowerMac? And how many DVD discs will it take on a full Digital8 cartridge?
    Thanks for your help
    Web dude

    is this connection analog or digital?
    A Firewire port is all digital.
    Has anyone been successful to record, back up and edit their precious home videos on a G4 PowerMac?
    Yes. Before the G5 came out, many people used G4s (and some still do) to edit not only home videos, but commercial television programs as well.
    how many DVD discs will it take on a full Digital8 cartridge?
    A standard DVD-5 (single layer disc) will hold about two hours of DVD-Video ... video AFTER it's been properly compressed to meet the DVD-Video standard.
    However, if you're asking about raw footage (not compressed more than it was recorded), you should be able to get close to 14 minutes of footage per 4.7gb disc. Digital8 uses the DV codec which requires about 13.3gb per hour of footage. If you recorded the tape in SP mode, you should be able to get just over 1 hour of footage per tape.
    -DH

Maybe you are looking for