Will training in CS3 support me in using CS5?

Different divisions of my company are using different versions of CS software. I have an older version (CS3) and want to do some tutorials to learn it. My HQ uses the newer version. Will the knowledge form the old version be transferable to the new one?

Hi - Thanks for responding. I will be using Illustrator, Dreamweaver, Photoshop, InDesign and Flash. Does that help? I am unfamiliar with all this software and trying to use the resources I have rather than purchasing the updated version AND getting trained. If I can use CS3 and get trained in CS6 that would be most cost effective. Thanks in advance and please be patience with my ignorance…Liz
Liz Golden
E-mail: [email protected] <mailto:[email protected]>
"Before printing this mail or any of its attachments, please be sure it is absolutely necessary. Protection of the environment is everyone's responsibility. We have the right to enjoy it but also the obligation to preserve it"
DISCLAIMER: "The content of the present communication, and its annexes, is for informational purposes only and does not in any case constitute a binding offer, acceptance or opinion for GAMESA unless so set forth in separate document subscribed by a representative of the company with sufficient faculties to do so. This message may contain private and confidential information and is directed exclusively to its addressee. GAMESA will not assume any obligation, nor execute orders or mandates received or sent by electronic mail."

Similar Messages

Can you open/edit indesign files on CS3 that were created using CS5?

I recently bought indesign CS5 and am using this for my internship; however, my boss is still using CS3 and said she could not open or edit the indesign file i sent her. I looked under "export" to see if there was an option and did not find anything. I am using a mac and I believe she is using a P.C., also, when I last sent her the file, I was still using my free trial - does any of this make a difference? Please help!

This has been covered endless times but anyway, I'll do it again!
You have to export an idml file from CS5, then open that idml in CS4, export an inx file from there then open that in CS3 and save as an indd. Sorry but there is no way round it, fullstop, end of story etc etc. So if she is using CS3 and you're using CS5 there is no route between them unless you have CS4, and even then the route is littered with pitfalls! Look here for a rather long discussion / sometimes rant on the subject.
Ultimately she'd have to upgrade, or you could see if you could buy a CS3 or 4 version but it is very hard to get a legitimate copy, the only way is buy it off someone you know and most people aren't selling because they're upgrading.
Best news last, there is a short term fix, go to this guys blog and you can download a trial version of CS4 which will last for a month.

I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider

I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?

There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file. What

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file". What do I need to do to open my NEF files?? Thanks.

Thanks for the quick reply, CP
FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop. Beyond the metadata, here are no fonts or text in the file.
1. I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...". The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files. By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
2. I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF. Same problem. Turn ON Maximize Capability and it works. As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
3. I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem. Windows and Adobe progs are all updated. Saving to a different HDD has no effect.
The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem. My guess it is a bug in PSD processing routines.
If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
Thanks again

When does Adobe Encore CS3 support DTS-HD audio

When does Adobe Encore CS3 support DTS-HD audio?
Today I have tried to make a Blu-ray disc project with a 5.1 DTS-HD (192 kHz)audio track, but the DTS-HD audio track was much longer in the timeline than the videotrack! while the DTS-HD was encoded properly and was excactly the same length then the videotrack,
I think DTS-HD is still not supported by Adobe CS3....when will there be an update to solve this?

Okay - bug confirmed here.
DTS-HD MAS is not being correctly parsed by CS3.
I tried this using a 24-48 5.1 DTS-HD MAS file, and a file lasting around 20 minutes came in at over 4 hours in CS3.
Admittedly, I used the Blu Ray + HD DVD Primary profile.
So, I tried again using a 4.18 duration 5.1 mix at 24/48 resolution, using the pure Blu Ray profile.
When imported into Encore CS3, this came out at an apparent 1 hour 6 min file. Clearly, something is wrong here.
Further - it would appear that despite it being possible to import the stream, DTS-HD is simply not supported at all - you have to enable the "All Files" option to get the import dialogue to even see the file.
Yet again, we see Audio as the poor relation in a video suite.
Maarten
Best file a feature request for DTS-HD support.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Same form should also be used for the Bug Report.
If enough people ask for this, it may get implemented - and as Adobe are concentrating on Flash & Blu Ray these days, you may even get lucky.

If I upgrade from CS3 Windows to CS4 Mac , will my windows CS3 still work?

Subject says it all.
I would like to have photoshop CS4 on my mac but be able to retain the useage of CS3 on my windows machine. Is this possible or will upgrading cancel out my ability to use CS3?

Because i have two computers that i use simultaneously, 1 mac and 1 pc. I would not own a mac if I wanted to run windows on it hehe.
I have software I use on windows because it is more supported than the mac version of it. ( some companies shouldn't tease and say they have a mac version unless they actually have a tech squad capable of squashing bugs )
It is very convenient to have photoshop on my windows pc along with that software.
My PC and Mac are almost identical in specs ( 4gb ram, 2.13 ghz core 2 duo vs 2.4 ghz core 2 duo ) yet my mac can open files from my PC's desktop 10x faster than my PC can. - over the network. I keep my PC in top shape, i defrag, i run malware / antivirus cleaners, I check my registry regularly. Its just not close to being as fast as my mac.
I use my mac primarily for webdesign/development work and thats why I would love to have a permanent version of photoshop on it. the work I do on my PC is related to 3d and the software I use has very poor mac support.
So my question has been answered, I am unable to crossgrade to mac and retain a working PC version. so for now, i get to upgrade the PC version and wait for a few more $ until i can grab a full mac version. at which point i might even go all out and grab the $1700 suite.
Thank you for the help!

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

Will my iTunes account support two iPads, and will the apps that I paid for on one iPad be free on the second iPad.

Will my iTunes account support two iPads, and will the apps I buy for one iPad be free for the other iPad.

Yes yes and yes.
My girlfriend and I use the same AppleID for purchases, and any apps that she purchases I am able to then purchase without additional charges.
EE

HT3529 I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

Read here:
http://support.apple.com/kb/TS2755

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Clarification: this is a user forum; you are not addressing Adobe here.
The answer to your question as phrased is: never.
CS5 is history and it is not longer supported. There will not be any updates or bug fixes for CS5.
You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera..

How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

HI All,
We are using Oc4j version 10g 10.1.3 , and while starting conatiner getting below warning , let me know if anyone have solution for this,.
14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
Please take the appropriate actions to migrate to an alternative strategy! **********
2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
of this product!

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Will the Iphone 5 support the Hava Player

Will the Iphone 5 support the Mobile Hava player

According to this article: http://www.macworld.com/article/1167240/ios_6_features_you_might_have_missed.htm l
It does... I saw a photo of the relevant slide that was put up during the iOS 6 announcement, but am too lazy to look for it now.
It's possible it may not have made it into the final release. Apple never made any statements about it as far as I know beyond the slide referenced.
Near the end of the iOS portion of the keynote, Apple showed a slide listing a host of other features included in the iOS 6 update. Among those were Game Center challenges, the ability to connect Game Center friends from Facebook, VoiceOver improvements, personal dictionary in iCloud (for adding your own terms to the dictionary, which can sync between devices), and per-account signatures in Mail. Also on the list was improved privacy, which—as a new option in Settings—will let you control which apps can access which bits of personal data, like your Contacts, Calendar, or Photos. Other features on the list included autocorrection for every keyboard,Bluetooth MAP support (which is commonly used to help cars better offer hands-free communication with Bluetooth devices), kernel ASLR (which aims to make data even more impervious to snooping from malicious attackers), custom vibrations for alerts, redesigned stores (for the App and iTunes stores), IPv6 support for Wi-Fi and LTE, word highlights for speak selection, improved keyboard layouts, alarms with songs, and faster JavaScript in Safari. Apple also says iOS 6 includes a global HTTP proxy option, which would supplant the current approach, limited as it is to per-connection proxy settings."

Will the iPhone 5 support BT Message Access Profile (MAP)?

Will the iPhone 5 support BT Message Access Profile (MAP)?

According to this article: http://www.macworld.com/article/1167240/ios_6_features_you_might_have_missed.htm l
It does... I saw a photo of the relevant slide that was put up during the iOS 6 announcement, but am too lazy to look for it now.
It's possible it may not have made it into the final release. Apple never made any statements about it as far as I know beyond the slide referenced.
Near the end of the iOS portion of the keynote, Apple showed a slide listing a host of other features included in the iOS 6 update. Among those were Game Center challenges, the ability to connect Game Center friends from Facebook, VoiceOver improvements, personal dictionary in iCloud (for adding your own terms to the dictionary, which can sync between devices), and per-account signatures in Mail. Also on the list was improved privacy, which—as a new option in Settings—will let you control which apps can access which bits of personal data, like your Contacts, Calendar, or Photos. Other features on the list included autocorrection for every keyboard,Bluetooth MAP support (which is commonly used to help cars better offer hands-free communication with Bluetooth devices), kernel ASLR (which aims to make data even more impervious to snooping from malicious attackers), custom vibrations for alerts, redesigned stores (for the App and iTunes stores), IPv6 support for Wi-Fi and LTE, word highlights for speak selection, improved keyboard layouts, alarms with songs, and faster JavaScript in Safari. Apple also says iOS 6 includes a global HTTP proxy option, which would supplant the current approach, limited as it is to per-connection proxy settings."

Will CS6 still be supported on Windows XP platforms?

Will CS6 still be supported on Windows XP platforms now that Microsoft no longer support this operating system?

Hi Zardos999,
Welcome to Adobe Forums.
Some applications will work on windows xp and some applications will not work. ( For eg. Premiere Pro, Encore, After effects will not work).
Which Adobe Application are you using?
Please check out the system requirements in the below link.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html
Thanks

If I buy an iphone from the hong kong site to use in new zealand, will it come unlocked and can i use it in new zealand on a nz service provider?

If I buy an iphone from the hong kong site to use in new zealand, will it come unlocked and can i use it in new zealand on a nz service provider?

If you purchase an unlocked iPhone it will work on any supported gsm network.
Just FYI, apple will not ship outside the country in which the device is purchased. A device purchased in the Hong Kong website must have a shipping and billing address in Hong Kong.
Also, warranty and support are only valid in the country of origin.

Will training in CS3 support me in using CS5?

Similar Messages

Maybe you are looking for