Will TREX/KM search for content on PDF files in Searchable image formats?

Good Day,
We are implementing KM/Trex for an SAP E-sourcing installation and I'm wondering if TREX is able to search PDF contents in the Searchable image format?
Essentially, we scan a document which creates an image and then run Abobe Acrobats OCR on the document to create searchable text.
Thanks in Advance,
Kyle

Hi Kyle,
TREX is not able to index a scanned document even this is pdf.
BUT if afterwards a OCR is running and this OCR text will be stored as hidden text in the pdf than TREX is able to search in this pdf.
Best regards
Frank

Similar Messages

  • Search for content within a PDF

    Is it possible to search for content within a PDF across a mapped drive?

    Yes. Use Edit>Advanced search. Choose All PDF Documents in and choose the mapped drive.
    They have to be searchable PDF's of course...

  • TS1398 When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

    When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

    I Can do that for home but not at friends and work places, nobody else has any problem joining it!! I'm wondering if restoring factory settings will solve it but don't really want to do that as its a hassle to reinstall everything for it to not solve the problem!!

  • Activate Change pointers for TREX classification search for Business Objects

    Hey all...
    Does anyone out here has any idea on how to activate the change pointers for TREX classification search for business objects: - for me I am specifically doing it for Materials and Customers.
    Okay, let me explain the issue: -
    For TREX search, we need to schedule a background job for Delta Indexing. But Alas! Delta indexing does not capture the changes to Classification data of the business object.
    For this we activated the change documents for the particular class in the customizing. But to my surprise, change documents and change pointers for TREX are entrirely different.
    How do I know:
    Change ID of CDHDR does not correspond to Change pointer in table COM_SE_CPOINTER. Now by activating the change documents I am getting entry in CDHDR and CDPOS but the mentioned change pointer table still does not get the entry.
    I searched for BTEs and I got the below: -
    Now to me the very obvious one was 4003, but it is not called while changing the classification data for materials. Ofcourse I activated the Product and the function module.
    and now I am stuck!!
    Any pointers for the Change pointers would be really appreciated??
    Please share your knowledge even if you don't know the exact answer . I am new to TREX so possibly vague conversations could provide me a hint .
    Thanks,
    Best Regards,
    Shreya

    Hi Guys,
    This issue was solved by implementing the BTE 4005 (OPEN_FI_PERFORM_00004005_E). This particular event is triggered in the update task for saving changes to business object. So In my function module (corresponding to BTE), I have explicitly called the method to write an entry in COM_SE_CPOINTER, because we just need the reference of business object for which classification data is changed.
    Please refer the below code for more clarity.
    BTE position: -
    method called in FM to write change pointer.
    Thanks anyways, for all the responses.
    Cheers,
    Shreya

  • Does Acrobat Pro read the content in pdf file and transforms it?

    Does Acrobat Pro read the content in pdf file and transforms it to xls file without the need for much changes or manual work?

    Acrobat X (Standard and Pro) will save tabular data to XLS or XLSX format, provided it can recognize the table as being a table. If the PDF has missing or incorrect structure tags, Acrobat will try to guess the table layout by the position of text and lines on the page - this works well for basic formatting but if the table has complex styling, spanned cells etc. it can lead to problems.
    Acrobat X will even attempt to export a table within a scanned document, by applying OCR during the export stage - though again this relies on the table being visually identified.
    See http://www.adobe.com/products/acrobatpro/pdf-to-word-excel-converter.html and this article on how to extract one table from a larger document.

  • Getting the page content as pdf file

    Hi All,
    I have a use case like i need to get the page content as pdf file.
    For this i found xsl file and it's config under the following locations
    /libs/cq/config/rewriter/pdf/transformer-xslt --config of source
    /libs/wcm/core/content/pdf/page2fo.xsl -- xsl file location
    For custamising this functionality i copied both confing node and xsl file under "/apps" .In the Config file i changed source to refer xsl file under /apps.But it's not taking config changes.
    I have looked into http://cqblueprints.com/xwiki/bin/view/CQ+FAQ/How+can+I+configure+the+ PDF+rewriter
    there it's saying like we need to modify the com.day.cq.rewriter.xml.XSLTTransformer class. i am not getting how to modify it.
    I need this urgently
    Thanks,
    Chinna Yadlapalli.

    This script:
    http://indesignsecrets.com/zanelli-releases-multipageimporter-for-importing-both -pdf-and-indd-files.php
    answers all your questions.
    Peter

  • Read contents inside pdf file programmatically in SharePoint

    I have a SharePoint document library, My Requirement is when user add PDF file on the document library the event receiver fire and read contents inside
    pdf file programmatically. After the start workflow according to the result of event receiver.

    If your question is about handling events in apps for SharePoint, see these links:
    http://msdn.microsoft.com/en-us/library/office/jj220048%28v=office.15%29.aspx
    http://msdn.microsoft.com/en-us/library/office/jj220051%28v=office.15%29.aspx
    If what you need is a way to extract text from the PDF inside the event handler, see this example that uses leadtools.
    http://support.leadtools.com/CS/forums/ShowPost.aspx?PostID=43894
    You should use PDF text extractor in your Event Handler code -
    You can use iTextSharp for reading content
    http://www.codeproject.com/Tips/387327/Convert-PDF-file-content-into-string-using-Csharp

  • IMovie error 'searching for movie data in file "IMG_4365.MOV"'?

    my iMovie goes into a loop at startup with the message "searching for movie data in file IMG_4365.MOV"?
    I'm on iMovie 09 (version 8.0.6) and it's driving me mad. Help!

    I am also seeing this bug and often work on 400mb+ presentations that use larger screen sizes and have lots of video assets for work.   On large files I find that autosave is not ideal, and would also like a way to turn it off. The computer that was seeing the issue was running 10.7.5.  It was just updated to 10.8.2 so I am keeping my fingers crossed that it works better now.  Time will tell.
    I also really hope that Apple gives us a real refresh on Keynote on the Mac.  As old as it is, it still ahead of Powerpoint.  But it wont stay that way forever standing still and nobody else has a better alternative that is as fast and flexible to work with.  They are squandering somthing special by letting it gather dust.

  • Searching for movie data in file "DSC_0007.AVI". HELP

    I've been getting this message for sometime and can't figure out how to get rid of it. I assume there is a iMovie database file the is looking for this file that obviously no longer exists. Anyone know how to get rid of this, edit the database file or rebuild the database?
    Is there a way or a program that can search the contents of system files for this file name?
    Thanks,
    -Ed

    I also got into trouble. The big thing for me was I was exporting quicktime movies from FCP but not having them be self contained. Those files and the references to those files were looking for some render files that I had deleted.
    The fix for me was to painfully go through all the Lookings... at FCP launch and then hit cancel. Once it finally loaded I made all layers invisible and got the warning about losing render files then turned visibility back on and re-rendered each sequence. Then I made new sequences for each of the sequences and copied and pasted from the old sequence into the new ones and deleted the old sequences. I then deleted all files that I could (mostly motion projects) that were referencing the files. Finally I saved the Project as a new name.
    I think the first step of losing render files and then re-rendering probably did the trick but I didn't want to go through all the lookings again so did the other steps as well.
    Another problem is that the Motion templates I had created were also referencing these not self contained quicktime files and had to reconnect to new self contained media that was the exact length and dimensions as the old (to avoid redoing the work in motion) then to save new templates and trash the old files.
    If you finally get FCP open leave it open until the project is done just incase so as to avoid the painful launch process.

  • Searching for movie data in file Name-FIN-00000001

    While starting up FCP (6.0.6) gives an error message "Searching for movie data in file Name-FIN-00000001".
    After 10 to 20 min FCP will start up.
    How do I get rid of this annoying error message when starting up?
    Thanks W.

    As Jim says, this is a render file. However, simply rendering it won't fix this. What is causing this error is a QT reference movie in the project. When you export a QT movie, and make don't make it self contained, it is a reference movie that references media files and render files. When a render file is deleted (FCP does this automatically when the render file is no longer needed) then the refrerence movie can no longer function... one file it references is gone. Simply re-rendering won't fix it, because it is referencing that SPECIFIC render file.
    You need to find and delete the QT Reference movie from your project.
    Shane

  • Searching for movie data in file "Untitled.mov"

    Ok I have already searched in the forums and none of the solutions have worked. Can anyone help me with this problem?
    When I open Final Cut Pro, before the full program opens this error pops up:
    Searching for movie data in file "Untitled.mov".
    Screenshot - (http://imgs.hnation.org/uploads/714c01ba72.png)
    After like 10 seconds this error then pops up:
    The movie file "Untitled.mov" cannot be found. Without this file, the movie cannot play properly.
    Screenshot - (http://imgs.hnation.org/uploads/8c5564c42f.png)
    I have tried pressing the "Search" button and have tried every Untitled.mov file I could find, but none of them worked. If I press "Cancel" then the same thing happens 5 more times until Final Cut Pro actually opens.
    Help Please. Thanks!

    what if I am unable to get a hold of the footage again to re-import? Is there an alternative way?
    There is no alternative. The movie file is missing information. Either you captured footage and it broke it up into smaller segments (-av-0, -av-1, -av-2) and one or more of those files are missing, or you exported a Quicktime REFERENCE movie, and reimported that into FCP...and have since deleted some media that the reference file....references.
    Either you have it or you don't. If you don't have it...and cannot reimport it, then you are SOL. The only way to get rid of the message will be to delete the clip in the project that is causing the error.
    I have already tried reinstalling 3 times. The same error still pops-up.
    This is not an error with the software. You have a clip in the project that is missing something.
    Shane

  • Searching for movie data in file "******.mov"

    The last couple of weeks I've been getting dailog boxes that freeze up Keynote with the following message:
    Searching for movie data in file "******.mov"
    It runs through all the different MOV or MP4 video files I have in that particular Keynote and doesn't allow me to do anything but wait. I've tried moving the file to another HD but this didnt't change anything. Also changing the save settings didn't help.
    It happens a couple of times an hour and is getting annoying. Anyone have any clue how to solve this?

    I am also seeing this bug and often work on 400mb+ presentations that use larger screen sizes and have lots of video assets for work.   On large files I find that autosave is not ideal, and would also like a way to turn it off. The computer that was seeing the issue was running 10.7.5.  It was just updated to 10.8.2 so I am keeping my fingers crossed that it works better now.  Time will tell.
    I also really hope that Apple gives us a real refresh on Keynote on the Mac.  As old as it is, it still ahead of Powerpoint.  But it wont stay that way forever standing still and nobody else has a better alternative that is as fast and flexible to work with.  They are squandering somthing special by letting it gather dust.

  • Frequent "Searching for Movie Data in File ..." errors

    OK, I searched the forums for this but didn't find anything, so don't nobody jump down my throat please ...
    I very often find myself, when trying to export a file through QuickTime conversion, confronted with the error message "Searching for Movie Data in File [XXX - 0000000008]" which FCP invariably cannot find. I go to look in my capture drive myself, and sure enough, no file exists of that name. Without the file in question, FCP won't run the conversion. I get around it by exporting directly to QT, opening that file in QT Pro and re-exporting, but what the he11 is FCP doing in the first place? Why is it making all these files then losing/destroying them?
    Help very much appreciated. Running FCP 4.5 HD; rest of specs in profile.
    Thanks!

    Without being able to see your project's history, I can only surmise you have created some copies of some clips and then tossed the originals. Or used reference movies that point to renamed clips. Or you've renamed some clips but used a differently-named copy of it. You may have copied a clip from one project and placed into another and then later discarded the source media.
    I get around it by exporting directly to QT, opening that file in QT Pro and re-exporting, but what the he11 is FCP doing in the first place? Why is it making all these files then losing/destroying them? < </div>
    That's because the original source media is always required for Compressor's operations. You see copies and renders in the timeline but Compressor will always recreate fresh media so looks for the sources.
    This problem is almost always a user error, though it is not easily debugged from where I'm sitting. It is caused by a few subtle misperceptions about nesting and copying clips from one project to another without taking the source media with them.
    Sorry not to be more definitive, I'd need to have watched you work for several hours to know what's going on with this.
    bogiesan

  • . . . searching for movie date in file "Clip 03"?

    . . . searching for movie date in file "Clip 03".
    When I start iTunes, it immediately starts in with a series of messages like this . . . the program is frozen, and the "stop" button cannot be selected. Each message is on screen for a few seconds, then there is another, looking for another clip or photo file. Tis goes on for some time (+/- 10 minutes) until it finally gets to a slightly different message: "The movie file "Bounce Across 01" cannot be found. Without this file, the movie cannot play properly." This time there are two radio buttons -- "cancel" and "search." If I select "cancel" it goes away and iTunes works properly.
    I have tried re-installing iTunes, and it has been upgraded at least twice since this started. Any solutions? It has become very frustrating.
    Thanks.

    Can I be confident that these files are now self-contained, how can I check, and how can I keep this problem from recorring?
    Checking to see if the file is self contained is normally very easy. Just open the properties window and ensure the all resource references point to the main file.
    NOTE: Remember that some applications can demux "muxed" file content in the form of "elementary" stream files which are paired. (E.g., demuxing "muxed" MPEG-2 files as paired M2V and AIFF files to avoid transcoding the video.)
    As to avoiding the problem in the future, you would first have to determine what the original problem was. For all we know your drive could be failing, the system may have timed out while processing some higher priority task, you may have an intermittant connectivity issue, there could have been a one-time read issue, etc.

  • Need to generate a Index xml file for corresponding Report PDF file.

    Need to generate a Index xml file for corresponding Report PDF file.
    Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
    This is generating pdf successfully.
    As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
    Please see the following attached sample file .
    PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
    Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
    In R12 ,
         We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
         xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
         OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
         docProc.process();
         PrintInvoiceThread :
              out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
                   out.print("<xapi:requestset ");
                   out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
                   out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
                   out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
                   out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
                   out.println("</xapi:indexfile>");
                   out.println("<xapi:document output-type=\"pdf\">");
    out.println("<xapi:customcontents>");
    XMLDocument idxDoc = new XMLDocument();
    idxDoc.setEncoding("UTF-8");
    ((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
    idxDoc = null;
    out.println("</xapi:customcontents>");
         In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
              public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
              public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
              public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
              public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
    Is there any similar java library which do the same thing in fusion .
    Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
              Section 7.11.3.2 Invoking Processors with InputStream .
    But this is not helping much to me. Is there any other document/view-let which covers these thing .
    Appreciate any help/suggestions.
    -anjani prasad
    I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
    PrintInvoiceThread
    InvoiceXmlBuilder
    Control.java

    You can find the steps here.
    http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
    http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

Maybe you are looking for