Will Unity Connection ever support Microsoft 365 Exchange

Hello,
Will Unity Connection ever support Microsoft 365 Exchange. The link below states that it is not supported in 8.6 but does not state that it will never be supported. If If anyone has any information it would be greatly appreciated. Thanks
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/solution_overview_c22-677999.html

HI Jason,
Here's what I found, Exchange 365 is supported on CUC 8.6.2, which will come out in a few weeks. However there's a Microsoft limitation of 19 users, but Cisco and Microsoft are actively working the problem.
Regards,
Tere.
If you find this post helpful, please rate!

Similar Messages

TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

Outlook 365 not bringing in emails when not used with Microsoft 365 Exchange

We have a number of clients who were all using Outlook 2003 on Windows XP and needed to be migrated off once support ended. We have upgraded them all to Windows 7 and Office 365 including Outlook 365/2013 but as we were not able to move their domains to
Microsoft exchange we are running Outlook connected to their email provider running IMAP email. Unless Outlook is working in Safe Mode, folders will not sync and new emails will not download. This has become such a problem that we have had to downgrade each
client to Outlook 2010.
It appears to us that Outlook 365 only works correctly if the domain and mail is hosted on Microsoft 365 exchange. Is this true as we have not read this anywhere and it has cost our company a lot of time and money.
John Kirkby
The IT Guys (WA)
http:\\www.itguyswa.com

Hi John,
Since the folders and new mails can be synced in Outlook safe mode, I think the issue may be caused by any add-ins or third-party DLLs.
In Outlook safe mode, there are some features and add-ins disabled in Outlook. We need to review the disabled features and find out which is the cause of the issue. To get the detailed steps about safe mode troubleshooting, please refer to the
Step 6: Start Outlook in safe mode part in the following KB:
http://support.microsoft.com/kb/2934538/en-us
Hope it helps.
Regards,
Winnie Liang
TechNet Community Support

Will Lightroom 4 ever support Nikon's D4S net files? If so is they an idea of the release date?

Will Lightroom 4 ever support Nikon's D4S net files? If so is they an idea of the release date? I don't mind upgrading to 5 but unfortunately it doesn't work with my OS for Mac and I shouldn't have to upgrade both and don't want to...

Well BAD BAD me... I ASSUMED it worked because I could install it on my mac 10.6 but guess what... 8.3 won't support the D4S files. I swear I am in a never ending loop of hell. I really shouldn't have to upgrade my WHOLE operating system AND buy the newest version of Lightroom that I don't need just because I got a new camera. THIS IS CRAZY!!!!!!!!!!!!!!!!!!!!!!

Unity Connection 9.1.2 - MS Exchange 2013 support for Single Mailbox?

Hello,
we are currently running a unity connection system in version 9.1.2TT1.11900 together with single mailbox enabled with our Exchange server in version 2007.
We are now planning to upgrade the exchange server to version 2013. From my understanding Exchange 2013 is supported with CUCN 9.1.2 (see http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/design/guide/9xcucdgx/9xcucdg020.html).
When i go to the configuration screens I cannot choose Exchange 2013 ... Is there a special way to configure this or is 2013 not supported with Unity connection 9.1.2 ?
any hints ?
Michael

Exchange 2013 is supported.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/unified_messaging/guide/9xcucumgx/9xcucumg020.html#17832
If you choose to allow Unity Connection to search for Exchange servers, then you need to select from the following two options:
– Exchange 2007 and/or 2010: Unity Connection can access every mailbox in the Exchange organization consisting of Exchange 2007, Exchange 2010, and Exchange 2013.
– Exchange 2003, 2007 and/or 2010: Unity Connection can access every mailbox in the Exchange organization consisting of Exchange 2003, Exchange 2007, and Exchange 2010. When the Exchange organization includes Exchange 2003 servers, Unity Connection always communicates directly with the Exchange back-end servers, it never communicates with Exchange front-end servers.
The drop down does not state 2013 but it will work fine for 2013..

Will this API eventually support Office 365 and other hosted Lync Services?

I just noticed in the intro forum post that this SDK only supports on-prem Skype installations. I was hoping to use the SDK against an Office 365 install. Is it in the roadmap for this SDK to support hosted Skype? Are there any estimate timeframes you can
share with us?
Many thanks,
James.

I'm having this exact same issue.
Have you seen this thread? https://discussions.apple.com/thread/5252673?start=45&tstart=0
I'm on Exchange 2013, which I manage, and Mavericks. I also noticed you can see a "Linked Contact" on OWA 2013.
This is just more of the extremely poor Apple software engineering we have seen over the last few years...
Also: http://community.office365.com/en-us/forums/153/t/187666.aspx
Message was edited by: ibrennan

Wildcard Certifiate support for Unity Connection

Does Unity Connection started supporting Wildcard cerficates for the Unified messaging with Exchange integration?
CUPS 8.6.4 started supporting it for Calendar integration but we are not getting any document related to Unity Connection which states its supported now.
BR,
Sachin

Hi,
Thanks for the question.
Okay so I did some digging and found a few details that will help clear this up.
1. The documentation is wrong and we will be getting it correct as soon as we can. The CUC 9 admin guides states that you need to create an 'External Service' however this configuration has been changed.
2. Yes, Exch 2010 and I'm sure Exch 2013 will be supported. TTS uses IMAP for the connection method and as long as Exch permits IMAP traffic you're good.
3. To configure TTS, of course enable IMAP for Exchange. On the CUC side, you'll need to start with the class of service and check the following "Allow Access to Exchange Email by Using Text to Speech (TTS)". Then you'll need to create a new unified messaging service where you add the details of the Exch server and make sure to check "
Access Exchange Email by Using Text to Speech (TTS)". Then apply that UM service to an end user and test. FYI, when you check the message from the TUI it will be the option of external messages (default option 7).
Let me know if you have any other questions.
Good Luck,
Brad

Single Inbox on Unity Connection 8.5 and Exchange 2003 SP2

Hi,
We have Unity Connection 8.5 (with SU2) and Exchange 2003 SP2
We want to setup the Single Inbox feature that works well with Exchange 2007 and 2010, but my customer is running Exchange 2003 SP2.
We met all of the requirements outlined in: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp459928
I configure a new "Unified Messaging Services" profile for Exchange using Exchange 2003 and enabled for Single Inbox. When I run "Test" it displays the following errors (other validation is successfully)
The service port for IMAP is not functioning.
The system failed to connect to the server with a socket connection through port beatles.clubone.com:993. The error is error:0200206F:system library:connect:Connection refused. Refer to the tomcat log file for more details. If you are using secure connection, confirm that SSL is enabled on the server.
Why is it trying to connect using IMAP, that wasn't the case when I used for Exchange 2007 or 2010 when IMAP was not enabled.
Is there something else I'm missing for configuration with Unity Connection to support Single Inbox with Exchange 2003 SP2?
Thank you!
-rya

Hi Rya,
I just wanted to add my +5 vote for this great catch by Aaron (nice work "A")
If you are going to upgrade to Unity Connection 8.6
Check out this great doc from Saurabh for the refresh upgrade notes to 8.6.
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application/blog/2011/08/11/checklist-before-upgrading-to-unity-connection-86
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Unity Connection 8.5(x), single inbox, and smartphones

If the customer sets up the following environment:
Unity Connection 8.5(x) WITH SECURE MESSAGING
Single Inbox with Exchange 2010
Customer has smartphones (blackberry, etc).
We're trying to figure out if this is set up, will the smart phones be able to play the voicemail message or not? Based on what I see, I'm thinking they may not, but would love to hear from someone with eyes and ears back in the BU.
Cliff

They would not be able to play the message. From the Unified Messaging Guide:
To play secure Connection voice messages in the Exchange mailbox, users must use Microsoft Outlook and Cisco Unity Connection ViewMail for Microsoft Outlook. Without ViewMail for Outlook installed, users accessing secure voice messages see only text in the body of a decoy message; the text briefly explains secure messages.
In other words, the Blackberry phones don't have ViewMail and can only see the decoy message.

CUCM 10.5(1) and Unity Connection 9.1(2) compatibility

I'm planning to use PCD to migrate my MCS Call Manager 8.0(3) cluster to 10.5(1) early next week. I have a standalone 9.1(2) Unity Connection server and I'm reading conflicting information on Cisco's website about their compatibility. One page says they are compatible (http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html#46452) and another page says I have to upgrade Unity Connection to at least 10.0 (http://tools.cisco.com/ITDIT/vtgsca/VTGServlet). Can someone clarify this for me please?
If Unity Connection 9.1(2) is incompatible with CUCM 10.5(1) and I need to upgrade it, which procedure should I do first - or if they can safely be done at the same time. If I do Call Manager first, will Unity Connection be "dead in the water" until I get it upgraded?
Thanks in advance!
Lisa

That's very good news. Thank you very much, Jaime, for your speedy reply. You are truly an asset to this community!
If I do upgrade CUC at the same time and both CUCM (pub and sub) and CUC (standalone) are at 10.5(1), where would you host PLM? Right now I have ELM co-located on my CUC server. Our voice environment is reasonably small - less than 400 voice mail accounts and roughly 450 phones.
Also, can I upgrade CUC at the same time PCD is migrating my CUCM cluster or should this be done at a different time?
Thank you again!
Lisa

Unity Connection 8.5 message aging

In Unity connection 8.5, if message aging policy "Permanently Delete Messages in the Deleted Items Folder in" is set to N days, does it permanently delete the messages individually exactly N x 24 hours after the message was deleted or does Unity Connection run a purge of all messages past due to be deleted at a specific hour once a day (for example, at midnight).
In other words, if I have it set to 1 day and a message was "deleted" by a user at 1pm today, will Unity Connection purge such message at (1) 1pm tomorrow or (2) some scheduled time tomorrow after 1pm.
Thank you. An answer will be greatly appreciated.

Hi,
The Task agent runs every 30 minutes
Hence the message will be deleted as soon as task agent runs after 1 pm Next day.

Faxing to voicemail in Unity or Unity Connection

Does Unity or Unity Connection have the capability for callers to send faxes to the users voicemail box? Or do I need something like Cisco Fax Server to do this?
Thanks,
-mike

For Unity, there is a built-in tool that can be used for limited faxing capabilities (less than 50 users, it's called Fax Util). Outside of that, you can integrate with any number of Fax Servers. Unity Connection only supports integration with Cisco Fax Server (aka, OpenText Right Fax) for faxing capabilities.
Hailey
Please rate helpful posts!

Cisco support for Single Inbox Feature in Exchange 2003 for Unity Connection 8.5

Hi There,
Does Cisco support a Unity Connection 8.5 solution/design with the Single Inbox Feature (for Unified Messaging) configured with Exchange 2003, or does it support the Single Inbox feature on Exchange 2010 only?
Thanks

Thanks Anthony - I just found an updated doco that confirms that.

Unity Connection Office 365 Single Inbox - 100 Users Limitation

Hi all,
Goiing over the Unity Connection release notes:
Cisco Unity Connection 8.6(2) Support for Microsoft Office 365
Revised 13 April, 2012
In Cisco Unity Connection 8.6(2) and later, you can configure Connection to synchronize voice messages in Connection user's mailbox with the user's Exchange Online mailbox configured on Microsoft Office 365 environment. Microsoft Office 365 is a cloud hosted collaboration solution provided by Microsoft.
Cisco Unity Connection 8.6(2) SU1 is qualified for 100 users with Microsoft Office 365. For scalability beyond 100 users, you need to contact UCBU Product Management team through [email protected] mailer.
Note The integration beyond 100 users will not be supported by TAC until the BU has signed off on it.
I was aware of the 19 users per Unified Messaging account issue, in which we created several UM Service accounts as a temporary fix until Microsoft lifts the limitation. I wasn't aware of the above that there is a limitation to 100 Users total.
There has been a few posts regarding the 19 user/account issue in which the workaround has been to create up to 20 UM accounts to get up to 380 users as a temporary solution.
Any insight as to when this will be lifted or detailed timelines would be great!
Thanks,
Chris

Hey Chris,
I wouldn't go that route as you nicely noted. The specific locales for su2 are not shown
and I'm pretty confident that this bug would carry over to su2 as well
But then again....I could be way off base here
CSCty54979 - 8.6.x release notes should detail what builds are required for locales
Symptom:
Release notes for Unity Connection 8.6(2a) and 8.6(2a)SU1 are not clear about what builds the use of locales (localizations) are supported with and where they can be acquired
Conditions:
Customers wishing to support non-US English (ENU) languages with Unity Connect 8.6.x
Workaround:
For Unity Connection 8.6(2a), you must install ES12 and use the locale files that are labeled as ES12. The locale files are posted on cisco.com for download, but Unity Connection ES12 is not (you will need to open a TAC case and request a copy of 8.6(2)ES12)
For Unity Connection 8.6(2a)SU1, the 8.6(2)ES12 locales should NOT be used. An updated set of locales will be posted for use with this build in the near future (expected by roughly mid to late April 2012). Also note that if you are currently using the 8.6(2)ES12 locales, you should NOT upgrade to SU1 until the SU1 locales are posted to cisco.com so that you can use them.
If su2 is equivalent to ES44 then they aren't shown on this doc either??
http://www.cisco.com/web/software/Voice/pdf/LocalizationSupportforCUCESreleases.pdf
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan

Outlook 2013 Mail Setup Add Account crashes or will not connect to Exchange in Windows 8.1

I've posted this in the answers.Microsoft.com forum, as well as the Office365 forum, and they sent me here, saying the Outlook engineers would be the best to help with this. I actually already posted this question a week ago, but nobody here replied.
Getting a bit frustrated at the lack of support, except for Richard over at the Office365 Forum.
I'm setting up a new laptop with Windows 8.1. Just installed Office Professional Plus 2013. I have an Office365 E1 subscription, but this Office 2013 is not associated with the subscription.
When I go to setup any email account using the automatic mode (primary will be Exchange Online with my 365 account, but I've tested POP email accounts with the same result), the Mail Setup crashes once the email address and password is entered and Next is
pressed. This error message is displayed:
"Windows host process (Rundll32) has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
The step displayed as in process when the crash occurs is the "Searching for [email address] settings". The first step "Establishing network connection" is checked complete.
I've run an Office Repair, and there's no change. I've run a clean boot, and no change. I uninstalled/reinstalled both from the Click to Run version, as well as reinstalling from a disk install, with the same error still appearing.
If I use the manual setup mode and input the server outlook.office365.com, both the Check Name function and the Next button result in the error message:
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
I've disabled the firewall and still get this Outlook error. I am able to start Outlook and it will run now, and I can connect POP and IMAP email using the manual setup, but still cannot connect to ExchangeOnline via the manual setup. I still
get the error "The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
I deleted the Outlook data file and deleted the profile, and created a new profile, and I'm still getting the Add account setup crash Rundll32 error in the auto-setup mode.
Important to note: I tested my friend's Office365 E3 ExchangeOnline account and was able to get a successful setup test, so it doesn't appear that the problem is entirely just the Outlook2013 client, since it worked once with a 365 Exchange account.
I've been trying to get this working for 2 weeks now, and I am unable to completely switch off my old laptop using Outlook 2010 until I can get Outlook2013 setup on my new one, which is a huge hassle.
Can you offer any ideas or solutions? Please help ASAP.
Thanks,
Jason

IMPORTANT: I found the solution. Another user figured it out and posted the answer on another thread.
Please spread this around to all other Outlook support techs so they know to point people in the direction of the quick (though very obscure) fix to this problem.
See this thread for how to disable graphics acceleration in Office, which iswhat causes the rundll23 error.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rundll32-outlook-mail-windows-host-process-error/bf90e1fd-3985-4b15-bc50-f9b3e937a859?tm=1424345216297
Thanks,
Jason

Will Unity Connection ever support Microsoft 365 Exchange

Similar Messages

Maybe you are looking for