Will update from 10.4.8 to 10.4.10 affect FCP capture.

when I updated from 10.4.8 to 10.4.9 I had terrible capture problems. So I reinstalled 10.4.8 and the problems disappeared. If I jump to 10.4.8 to 10.4.10 will I encounter more FCP problems or has it been fixed?

in 10.4.9 to fix the dropped frames during capture -
http://discussions.apple.com/thread.jspa?threadID=929465&tstart=15
but apple says the update should fix the problem -
http://docs.info.apple.com/article.html?artnum=305284

Similar Messages

Will updating from CS6 to CC Indesign cause any unwanted changes to existing CS6 documents?

Will updating from CS6 to CC Indesign cause any unwanted changes to existing CS6 documents?

The update itself will not affect exisiting files, but if you open and save them in CCC you will no longer be able to open them in CS6.

Neither iPad or iphone 4S will update from 5.01 to 5.1

Neither my iPad 2 or my iPhone 4S will update from OS 5.01 to 5.1. On my iPad, when I go to Settings, General, Software Update I get the ipad error message: Unable to Check for Update Now - An eror occurred while checking for a software update.
The iPad and iPhone have been set to automatically backup up to iCloud and have been backing up automatically every day.
I tried connecting to my iTunes on my iMac running 10.6.8, but I get the error message "There was a problem downloading the software for the iPad. The network connection could not be established."
My internet connection is fine as well as wireless. And I have no other USB devices connected, the latest versions of iMac software (white iMac 10.6.8) and iTunes (10.6 build 40), and have rebooted both the iMac and iPad with always the same result and messages.
For some reason, neither one of my devices seems to be able to download the 5.1 update.
Any advice? Apple's "more information" link on the error message doesn't really say much except to check for the above things I've mentioned.
Thanks!

Springbk wrote:
I have pointed my DNS to OpenDNS DNS servers and this has resolved my problem it would appear that some ISP DNS servers are not ver good.....
208.67.222.222 (resolver1.opendns.com)
208.67.220.220 (resolver2.opendns.com)
I found the above instructions on another discussion thread and so changed the second of my two DNS settings to the first address provided above and both the iPad and iPhone then were able to update to 5.1 without issue.
Judging from the number of "thank you" posted there it seems like changing the DNS settings is the solution to the 5.1 update issues.

Will update from Tiger affect Automatic Software Update?

Hi guys.
It's my first question here. I purchased a MacBook approx 3 years ago from Apple Store which got Tiger(10.4.11) installed.
I would like to update to Snow Leopard because I need to upgrade from Adobe CS3 to CS5. My question is if I buy the Snow Leopard disc from Apple Store and upgrade from Tiger will automatic software update and other stuff work?
Appreciate your help.

Chubbs75 wrote:
My question is if I buy the Snow Leopard disc from Apple Store and upgrade from Tiger will automatic software update and other stuff work?
If you are asking if Software Update will automatically update Snow Leopard & other Apple-supplied software to the latest versions during or immediately after the upgrade, the answer is no. The upgrade should preserve whatever preferences you set for Software Update in Tiger, so depending on them you may see no automatic update notifications, notifications only after the interval for checks you have set has elapsed, or whatever.
Remember that it is highly recommended that you backup your HD, or at least your important data, before applying any upgrade or update. If you do that, you may want to run Software Update as soon as you verify that the upgrade went as expected, & let it recommend & install all the updates your system needs to bring it up to date.

Will updating from Snow Leopard to Lion mess with Garageband 09?

Hey guys, I just bought some software that requires OS X 10.7.5 so I need to update my Macbook pro if I want to be able to use it.. I just fear something happening to Garageband. Does anyone know if it'll mess with anything? I'd prefer not having to update to '11.

Your previous 10.6 based software may not work in 10.7 because Rosetta was discontinued in 10.7
http://roaringapps.com/apps:table
My advice, given the way your talking shows your age, is not to do anything, just software update and remain on 10.6.8.
maintain your backups, because if you jump to 10.7 your going to have issues and software you have installed is not going to work and your going to want to go back to 10.6
I've written a guide, but I don't think you can follow it.
How to revert your Mac to Snow Leopard
 Most commonly used backup methods explained
10.8 is coming out very soon, so wait for that and get it (or 10.9) on a new machine next time.
Your a very basic comptuer user, upgrading the operating system is a sudden drastic change and many problems can arrise which you won't know how to fix, you'll have to pay someone to fix them.
So why do that and have to buy all new software?
Apple makes it seem it's easy to upgrade the OS, but when software no longer works they don't care.

Not able to update from 10.4.11 up to 10.4.9

Hi all!
I am having a problem that I simply cannot figure out!
I am running Mac OSX Server 10.4.11.
My iMac is the 1st flat panel: PowerPC G4 700 mhz.
I know that when I 1st intalled 10.4, that I went to Apple and did all the Updates as far as I could go - which being a non-Intel was 10.4.9.
Just got the daughter a MacBook, and somewhere, sometime while I was figuring out how to share folders, I am now back down to 10.4.11.
I went back to Apple downloads and am attempting to re-update back to 10.4.9.
But! None of the downloads seem to work!
I think I have tried them all...
single steps (ie: 10.4.2, 10.4.3, 10.4.4, etc)
combo updates (10.4.9 tells me I should be able to get there from 10.4.1)
There are so many different downloads!
Universal, Combo, Intel, PPC, Server, etc.
Being as I am a PowerPC and a Server version, I have tried those labeled "Server Combo PPC" first.
It should work, but it is not.
Any ideas?
Anyone know which updates I really should be using?
BTW, Software Update finds me nothing.
Looking forward to hearing from some of you.
All the Best,
Alicia

Anyone know which updates I really should be using?
None. Mac OS X 10.4.11 is an update from Mac OS X 10.4.9; the version number is delimited by periods, and each item in the list is treated as a separate number for the purpose of determining what is newer. 11 is higher than 9. The Mac OS X 10.4.9 combo updater will update from Mac OS X 10.4.1, but you're running 10.4.11, not 10.4.1, and there are no free Mac OS X updates available for that OS.
(41379)

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

Update automatically under which circumstances, exactly?

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?

System has begun crashing (dropping-windowshade, message to shut down computer) during attempted capture or render. Hardware has been checked out and is OK. Other OS functions seem to be working. I have a bootable clone from the most recent period of good function, and also my original install disc for FCE.
If I need to try reinstalling FCE, are the updates still available from Apple?
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files? My 3+TB of underwater clips, stored on external drives as QT movies?
Any guidance appreciated. This forum helped me out a lot when I first started - didn't expect the end to come so soon & hope there's a feasible workaround!
Thanks,
Sharron S.

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?
Yes, via Software Update
Here is an article on how to Uninstall FCE HD You could also use FCS Remover (note there are different versions depending on what version of OS X you have - be sure to select the correct version)
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files?
- FCE project files - only usable with FCE or FCP. Not iMovie or FCP-X
- All your clips, however, can be used with almost anything including iMovie, FCP, FCP-X, QuickTime, etc.

Windows 8.1 will not get Forefront Client Updates from WSUS

Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

If i update from 10.6.8 to mavericks on one long in and say i have two longins, will it update both or just the one, and will it delete any saved docs in the process regaurdless

little unsure with all this so i might be typing it in a few extra spots
If i update from version 10.6.8 to mavericks on one user login will it update both if i have two logins on the mac. and if it does update both logins on the mac will it delete any documents saved on either of the logins.
please and thank you could really use the feed back and support and it would be much appreciated.

Upgrading the OS is a system wide thing. So all users will receive the upgrade.
It should not delete files and such. However, if you have for example files made with Pages '09. Then the new Pages that comes with Mavericks will make a copy of those files so you can continue to edit them. But those new files can not be opened in Pages '09. BUT again, some people perfer Pages '09 and they use that still. Mavericks will just hide Pages '09, it's still usable in Mavericks just hidden.
To be safe, make a back up of your system before doing any major upgrade.
KOT

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?
Also, I have the 08 version of iWork. Will this cause problems for the update? Can I update this AFTER I update the processor?

Welcome to Apple Support Communities
There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

Lync 2013 Photos will not update from AD

I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

IPad 2 will not update from version 4.3.5 (8L1).

I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

Naalamc wrote:
It's an ASUS, Windows 8, Version 11.1.3.8
Thank you.
Your iPad has iOS 4... See Here > http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Will I lose my programs updating from 10.5.8 to 10.6 OS?

I want to update from 10.5.8 to 10.6 OS on my MacBook Pro 2.5 GHz 2 GB 667 MHz. I have my personal docs backed up. Will I lose my programs such as Parallels, CS4, and Microsoft Office?

You shouldn't, but Verify the Hard Drive first, & also it might be pretty slow with only 2 GB of Memory.
Some Apps may not run though.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/

Will update from 10.4.8 to 10.4.10 affect FCP capture.

Similar Messages

Maybe you are looking for