Will updating to the latest GarageBand help with RAM issues?
Without fail, whenever one of my GarageBand projects exceeeds 4GB in filesize, I get the "Project cannot be played - too many instruments" error. I proceed to lock every track and delete every unused track. It makes zero difference and I can only play the project 5 seconds at a time.
Anyway, I am using the 2008 edition of GB. If I upgraded, would it make any difference? I have 4GB of RAM and the latest ver. of Logic can open the aforementioned GB file no problem.
I'm not sure of the answer, but if you're using the latest version of Logic, my inclination would be to upgrade to the latest version of GB. It's not expensive, it might actually solve your problem, and the worst that could happen is you have the latest version of GB.
Similar Messages
-
Hi every time i open a app it starts to lagg and then it closes the app and then i will open it again 5seconds later it will close down again (i do not have the thing where you can open up the apps that are running and close them down) thankyou and please help me
Tryy the following in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from Backup
- Restore the iPod to factory defaults/new iPod. -
Will the new Express help with this issue?
In one corner of my house (upstairs and opposite end of house from Time Capsule) I get lousy WiFi reception.
My upstairs has a previous generation Express connected to a Ethernet over Powerline extension from downstairs. The EoPL is plugged into one of the LAN ports on the Time Capsule, and the Express is configured to extent the network.
Would the new dual band Express improve signal strength, particularly for my iPad?
The Mac's reception upstairs seems to be fine.I can snag 2 AP Extremes from my home
If the hotel provides only wireless, then you will need at least one AirPort Express.....since it is the only device that can "join" a wireless network and then provide an Ethernet signal to a second AirPort. An AirPort Extreme does not have this type of capability.
So, in this setup, the Express is configured to "join" the hotel wireless network. Once that has been done, then connect an Ethernet cable from the Express to the WAN "O" port on the AIrPort Extreme and configure it to "create" a wireless network.
Once you have the Express and Extreme set up this way, you can take your laptop wherever you want and the network will continue to operate fine for other wireless clients that want to use it.
The hotel network only "sees" one device.....the AirPort Express....so, if the hotel charges for Internet use, you will only be charged for one connection.....even though the second AirPort is providing service for multiple clients.
Ideally, the hotel would have an Ethernet port in the room. Then, you only need one AirPort. Configure it to "create" a wireless network to provide service for multiple wireless clients.
In this type of setup, simply connect an Ethernet cable from the hotel wall port to the WAN "O" port on the AirPort.
Might be a good idea to call the hotel in advance to ask them what type of connections will be available in the room. You may only need to take one AirPort...and an Ethernet cable.
In either example above, you will have a Double NAT error message appear during the setup, just click to ignore that and the light will turn green on the AirPort "creating"' the network. Or, you can simply ignore the message and put up with a flashing amber light on the AirPort. -
Will someone from the UK please help with a security query?
Hello
I've been subscribing to a facility which provides cheap telephone calls, since around 2004. Details may be found here: http://www.call18866.co.uk
Last month my credit card was reissued for another three year period which, in turn, meant that previous financial commitments had to be renewed.
When I visit Call18866 to subscribe to my account I can, indeed, gain access to the secure areas, but I can see no 'https' nor a padlock when I use Safari as my browser!
I have also used Firefox, Chrome and SeaMonkey browsers to view the site - and they DO show 'https' and a padlock!
I'm wondering if the fault is with me or with the Call18866 wesite!
I should be most grateful if someone would use their Safari browser to check whether or not they can find a 'padlock' or an 'https' link at Call18866.
Thanks.
David B
PS I have questioned Call18866 about this. They have simply said that their website is secure!SQL> create table testme
2 as
3 select 'A' name, 1 val from dual union all
4 select 'A', 2 from dual union all
5 select 'A', 3 from dual union all
6 select 'B', 1 from dual union all
7 select 'B', 2 from dual union all
8 select 'B', 3 from dual union all
9 select 'C', 1 from dual union all
10 select 'C', 2 from dual
11 /
Tabel is aangemaakt.
SQL> select max(name) name
2 , max(val) keep (dense_rank last order by name) val
3 from testme
4 /
NAME VAL
C 2Regards,
Rob. -
i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!
Chester31,
Thank you very much for sharing your file with us! Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started? Did you update your iOS from 7.x to 8.0 recently?
We will continue investigating the problem and let you know what we find.
Thank you again for your help. -
I recently had a data transfer from my older mac to my newer one. After the transfer I logged into my new account and opened up my GarageBand. It worked perfectly fine, however when I logged into my old account with all my older data that I just transferred over, I could not open my GarageBand files and there is an error that states "GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song".If anyone could please help me with this issue, I'd greatly appreciate it. Thank You!
When you transferred your data from your old mac, you may have accidentally transferred an older GarageBand version and either overwritten your newer version, or your old account still has the old GarageBand icon in the Dock.
Search with SpotLight, if you have more than one Garageband version on your new Mac (type "GarageBand" into the SpotLight search field). Does it list more than one GarageBand version? Then delete the older GarageBand.app.
What GarageBand version have you been using at your old mac, and what is the version on your new mac? If it has been bought recently, it should have come with GarageBand '11.
Regards
Léonie -
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
Once I updated to the latest version of iTunes, I now cannot get all my apps to update. Then syncing up. Poor way of doing business with little help. Need help?????
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
hi!i updated to the latest version of ios and i had a lot of apps saved in icloud and i lost them all with tis soft update! i alo bought some music and i lost it too!what should i do?can someone help me? thank you
If you can't find these songs on your purchased list to redownload them (as explained here: http://support.apple.com/kb/HT2519), you'll have to contact iTunes store support for assistance: http://www.apple.com/emea/support/itunes/contact.html.
-
I have an iPhone 4 (IOS 4.3.1) and it was synced and backed up today.
I wanted to upgrade to the latest ios on iTunes (today's date is 3rd Jan 2013), it seemed to download ok (it took about 30 minutes or so), but when it tried to update onto the iPhone (I think this was what it was doing!) I got an error message that had code 3014 in it. Nowhere on Apple's website can I find a way to resolve this error code.
I then thought I would just try again from the beginning, but I then got an error message saying that if I continued I would lose all the contents on my iPhone so I cancelled it as I don't want to lose everything on my phone.
Can anyone help me as I am not very good at technical things and I really want to upgrade the ios on my iPhone without losing all the data I have on there already. An idiots guide would be great.
Thanks.Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.
iPhone 4, iOS 5.1.1If might be helpful if you actually told us what the problem is.
-
i have ios 4.3.3 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?
p.s.: i don't have any cinnection problem.....It could be the fact that your hosts file is directing itself to gs.apple.com Cydia not gs.apple.com Apple,
Hope it helps
http://support.apple.com/kb/TS3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
My iTunes will not install the latest 12.0 update
Okay, I'll start from the beginning.
I wanted to put a load of my own songs onto my iPhone 4s, but it came up with the box "iPhone won't work unless latest update is performed" or something of the sort. So as you do I went to download the latest update which is 12.0 I think, it downloaded fine it was just when it came to the installation that at the very end it failed and came up with an error box saying try doing it manually, although it didn't give me any indication as to what the error actually is. I tried doing it manually and the same thing happened again. So I've tried god knows how many times to resolve this, but nothing I do works, I've tried; Unistalling iTunes and everything that installs with it, restarting my laptop, temporarily uninstalling my anti virus to see if it was blocking me installing iTunes, but no matter what I try nothing will let me update to the latest iTunes so I can sync my phone!! Please help me guysFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!! Update unsuccessful, current software version is 5.1 (5201) . I've rented a movie recently and does not appear in my movie list, but I have been charged for this movie, can someone help me out with these issues.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
If when you choose restore you get a message that the device cannot be found, download the file below
Apple TV Software Restore 5.1.1 (2nd generation)
Apple TV Software Restore 5.1.1 (3rd generation)
Then hold down the option key while choosing restore and select the downloaded file when prompted. -
please help!! i've recently updated to the latest itunes version. after much hassle in doing so, it now tells me that the registry settings for importing or burning CD's/DVD's doesn't work and that i should reinstall itunes. i,ve done that from the website and from a saved position, but it doesn't work. i don't want to have to delete my library to have to start again !!!! there must be another way. it also said that it might be to do with other CD/DVD burning software, but i haven't put any on my computer that itunes didn't seem to lke before
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
Maybe you are looking for
-
Problem with analysis authorization- 0BI_ALL always needed
Dear all: we have a serious issue on so-called "analysis authorization" now. We have auth-restricted user who only have authorization to access data on one company code. We also create a BI-authorization in analysis authorization and assign the follo
-
PSA had delta records but while updating to DSO it shows zero records.
Hi all, I have a delta info package which picks up the delta records. The data is successfully extracted from source system and updated in the PSA. But the no of records extracted to the DSO are zero. Couldnt understand what is the problem. Request y
-
Sap wms fixed bin replenishment
hi experts, i am creating fixed bin replenishment the max bin qty 40, min 10 and replenishment qty 50 and i try to create LP21 fil the fields the whno storage type and bin and executed but the replenishment is not happened . the automatic TR al
-
Add a Property Dropdown menu in CSS panel, not showing all properties?
Hi, So, I am sitting side by side at 2 machines...I have the same CSS style I created for a table. On the one machine, I go to add a property and choose border-collapse. All is fine. I go to the other machine and border-collapse is not there? Then, I
-
Userexit EXIT_SAPLL03A_010(veryurgent)
hai , Can you please suggest me whether the EXIT can be applied for this requirement or not . User exit to be applied either after confirmation of transfer order, or after post goods receipt is carried out (whichever is most appropriate ABAPer to a